Bio- and toxic elements in mushrooms from the city of Umeå and outskirts,Sweden

Edible mushrooms (Albatrellus ovinus, Boletus edulis, Clitocybe odora, Gomphidius glutinosus, Leccinum scabrum, Leccinum versipelle, Lycoperdon perlatum, Suillus bovinus, Suillus luteus, and Xerocomus subtomentosus) collected from unpolluted areas of the city of Umeå and its outskirts in the northern part of Sweden were examined for contents of toxic metallic elements (Cd, Pb, and Ag) and essential macro- and microelements (K, Na, Ca, Mg, Cu, Fe, Mn, and Zn) using a validated method and a final measurement by flame atomic absorption spectroscopy (F-AAS). The median values of the toxic metallic element concentrations (in mg kg^?1 dry biomass, db) ranged from: 0.12–3.9, 0.46–5.1, and 0.91–6.2 for Ag, Cd and Pb, respectively. For the essential metallic elements, the median values of concentrations ranged from: 24000–58000, 15–2000, 59–610, 520–1900, 2.0–97, 16–150, 15–120, and 4.3–26 mg kg^?1 db for K, Na, Ca, Mg, Cu, Zn, Fe, and Mn, respectively. The baseline concentrations of the metallic elements determined in mushrooms were mainly affected by the fungal species. The assessed probable maximal dietary intake of Cd (0.002 mg kg^?1 body mass) solely from a mushroom meal was only slightly below a revised value of the tolerable weekly intake for this element, while for Pb (0.003 mg kg^?1 body mass) it was tenfold below the provisionally tolerable weekly intake.     

Sources and concentrations of gaseous and particulate reduced nitrogen in the city of Münster (Germany)

Atmospheric ammonia mixing ratios and the main inorganic ions NH₄⁺, NO₃⁻ and SO₄²⁻ of size-resolved particles in the range from 0.05 to 10 μm were measured at an urban site in Münster, Germany. High mixing ratios of ammonia with a median of 5.2 ppb and a maximum of 50 ppb were detected. The mass fraction of submicron particles was much higher during the day than at night. At night, a greater particle mass and an increased presence of particulate nitrate was measured. Recurring patterns of particle distribution were distinguished and their characteristics analysed. In half of the measurements, the accumulation mode was clearly dominating, which is an indication of aged aerosol. In some measurements, higher concentrations of fine particles were found indicating particle formation. In these cases, a smaller particle mass and about four times greater ratios of ammonia versus ammonium concentrations were observed. These data show that ammonia contributes considerably to the formation of secondary particulate material.     

Atmospheric composition change – global and regional air quality

Air quality transcends all scales with in the atmosphere from the local to the global with handovers and feedbacks at each scale interaction. Air quality has manifold effects on health, ecosystems, heritage and climate. In this review the state of scientific understanding in relation to global and regional air quality is outlined. The review discusses air quality, in terms of emissions, processing and transport of trace gases and aerosols. New insights into the characterization of both natural and anthropogenic emissions are reviewed looking at both natural (e.g. dust and lightning) as well as plant emissions. Trends in anthropogenic emissions both by region and globally are discussed as well as biomass burning emissions. In terms of chemical processing the major air quality elements of ozone, non-methane hydrocarbons, nitrogen oxides and aerosols are covered. A number of topics are presented as a way of integrating the process view into the atmospheric context; these include the atmospheric oxidation efficiency, halogen and HO_x chemistry, nighttime chemistry, tropical chemistry, heat waves, megacities, biomass burning and the regional hot spot of the Mediterranean. New findings with respect to the transport of pollutants across the scales are discussed, in particular the move to quantify the impact of long-range transport on regional air quality. Gaps and research questions that remain intractable are identified. The review concludes with a focus of research and policy questions for the coming decade. In particular, the policy challenges for concerted air quality and climate change policy (co-benefit) are discussed.     

Amino acids in dew – origin and seasonal variation

At two sites in the Armenhof district, 10 km east of Fulda, Germany, dew samples were collected from June 1996 to June 1997 and investigated for free and protein-bound amino acids. On account of the high pollen content, at the beginning of June 1996 and in May 1997 total amino acid concentrations were 53–390 μmol l⁻¹, in one sample 922 μmol l⁻¹. At other times the concentration in dew was 8–164 μmol l⁻¹. On 4 and 5 June 1996 the diluted free amino acid fraction (DFAA) of the total hydrolysed amino acids (THAA) at both sites amounted to 35–44% and was predominantly arginine, proline and glutamine/glutamate. Likewise on 11 March 1997 the fraction of DFAA was found to be 39.5% with extremely high arginine and proline fractions. At other times the DFAA-fraction was in the range 14–26%. From July 1996 to June 1997 the amino acid concentrations in the vapours rising from a meadow were also measured and it ranged from 8 to 51 μmol l⁻¹. From July to October 1996 the amino acid composition in the hydrolysates of dew samples and meadow vapours collected overnight were almost identical. The DFAA fraction in the condensation water collected overnight from the meadow varied from 18 to 40%. From 4 to 6 June 1996, on 11 and 13 March 1997 and in the period 16–20 May 1997, the amino acid distribution in dew showed much variation. The percentage fraction of arginine and proline in the hydrolysate increased greatly, whereas that of glycine and serine decreased. The large increase in proline and arginine in hydrolysate is attributable solely to the large amounts of free arginine and proline. This effect occurred in both 1996 and 1997 over several days at both sites at any one time and therefore appears confirmed.     

Validation of road vehicle and traffic emission models – A review and meta-analysis

Road transport is often the main source of air pollution in urban areas, and there is an increasing need to estimate its contribution precisely so that pollution-reduction measures (e.g. emission standards, scrapage programs, traffic management, ITS) are designed and implemented appropriately. This paper presents a meta-analysis of 50 studies dealing with the validation of various types of traffic emission model, including ‘average speed’, ‘traffic situation’, ‘traffic variable’, ‘cycle variable’, and ‘modal’ models. The validation studies employ measurements in tunnels, ambient concentration measurements, remote sensing, laboratory tests, and mass-balance techniques. One major finding of the analysis is that several models are only partially validated or not validated at all. The mean prediction errors are generally within a factor of 1.3 of the observed values for CO₂, within a factor of 2 for HC and NO_x, and within a factor of 3 for CO and PM, although differences as high as a factor of 5 have been reported. A positive mean prediction error for NO_x (i.e. overestimation) was established for all model types and practically all validation techniques. In the case of HC, model predictions have been moving from underestimation to overestimation since the 1980s. The large prediction error for PM may be associated with different PM definitions between models and observations (e.g. size, measurement principle, exhaust/non-exhaust contribution).Statistical analyses show that the mean prediction error is generally not significantly different (p < 0.05) when the data are categorised according to model type or validation technique. Thus, there is no conclusive evidence that demonstrates that more complex models systematically perform better in terms of prediction error than less complex models. In fact, less complex models appear to perform better for PM. Moreover, the choice of validation technique does not systematically affect the result, with the exception of a CO underprediction when the validation is based on ambient concentration measurements and inverse modelling. The analysis identified two vital elements currently lacking in traffic emissions modelling: 1) guidance on the allowable error margins for different applications/scales, and 2) estimates of prediction errors. It is recommended that current and future emission models incorporate the capability to quantify prediction errors, and that clear guidelines are developed internationally with respect to expected accuracy.     

Heavy metal pollution and risks in a highly polluted and populated Indian river–city pair using the systems approach

Environmental Science and Pollution Research - A sectorial approach for assessing heavy metal pollution in rivers neglects the inter-relationship between its environmental compartments and thus...     

Sources and characteristics of carbonaceous aerosols at Agra “World heritage site” and Delhi “capital city of India”

Agra, one of the oldest cities “World Heritage site”, and Delhi, the capital city of India are both located in the border of Indo-Gangetic Plains (IGP) and heavily loaded with atmospheric aerosols due to tourist place, anthropogenic activities, and its topography, respectively. Therefore, there is need for monitoring of atmospheric aerosols to perceive the scenario and effects of particles over northern part of India. The present study was carried out at Agra (AGR) as well as Delhi (DEL) during winter period from November 2011 to February 2012 of fine particulate (PM_2.5: d?<?2.5 μm) as well as associated carbonaceous aerosols. PM_2.5 was collected at both places using medium volume air sampler (offline measurement) and analyzed for organic carbon (OC) and elemental carbon (EC). Also, simultaneously, black carbon (BC) was measured (online) at DEL. The average mass concentration of PM_2.5 was 165.42?±?119.46 μg m^?3 at AGR while at DEL it was 211.67?±?41.94 μg m^?3 which is ~27 % higher at DEL than AGR whereas the BC mass concentration was 10.60 μg m^?3. The PM_2.5 was substantially higher than the annual standard stipulated by central pollution control board and United States Environmental Protection Agency standards. The average concentrations of OC and EC were 69.96?±?34.42 and 9.53?±?7.27 μm m^?3, respectively. Total carbon (TC) was 79.01?±?38.98 μg m^?3 at AGR, while it was 50.11?±?11.93 (OC), 10.67?±?3.56 μg m^?3 (EC), and 60.78?±?14.56 μg m^?3 (TC) at DEL. The OC/EC ratio was 13.75 at (AGR) and 5.45 at (DEL). The higher OC/EC ratio at Agra indicates that the formation of secondary organic aerosol which emitted from variable primary sources. Significant correlation between PM_2.5 and its carbonaceous species were observed indicating similarity in sources at both sites. The average concentrations of secondary organic carbon (SOC) and primary organic carbon (POC) at AGR were 48.16 and 26.52 μg m^?3 while at DEL it was 38.78 and 27.55 μg m^?3, respectively. In the case of POC, similar concentrations were observed at both places but in the case of SOC higher over AGR by 24 in comparison to DEL, it is due to the high concentration of OC over AGR. Secondary organic aerosol (SOA) was 42 % higher at AGR than DEL which confirms the formation of secondary aerosol at AGR due to rural environment with higher concentrations of coarse mode particles. The SOA contribution in PM_2.5 was also estimated and was ~32 and 12 % at AGR and DEL respectively. Being high loading of fine particles along with carbonaceous aerosol, it is suggested to take necessary and immediate action in mitigation of the emission of carbonaceous aerosol in the northern part of India.     

Riparian rehabilitation planning in an urban–rural gradient: Integrating social needs and ecological conditions

In the present context of global change and search for sustainability, we detected a gap between restoration and society: local communities are usually only considered as threats or disturbances when planning for restoration. To bridge this gap, we propose a landscape design framework for planning riparian rehabilitation in an urban–rural gradient. A spatial multi-criteria analysis was used to assess the priority of riversides by considering two rehabilitation objectives simultaneously—socio-environmental and ecological—and two sets of criteria were designed according to these objectives. The assessment made it possible to identify 17 priority sites for riparian rehabilitation that were associated with different conditions along the gradient. The double goal setting enabled a dual consideration of citizens, both as beneficiaries and potential impacts to rehabilitation, and the criteria selected incorporated the multi-dimensional nature of the environment. This approach can potentially be adapted and implemented in any other anthropic–natural interface throughout the world.     

Spatial variations in the aeolian deposition of dust – the effect of a city: a case study in Be'er-Sheva,Israel

The effect of buildings on the dry deposition of dust particles was investigated in Be'er-Sheva, a desert city with about 140,000 inhabitants in southern Israel, and at two reference points in the surrounding rural area. The mineral and chemical composition of dust sampled at all sites was similar, reflecting the composition of the local loess soil, its likely origin. However, dust deposited in the traps set up in the vicinity of buildings in the city was significantly coarser than the dust which accumulated in similar traps at exposed sites in the countryside. The amount of dust (by weight) in the urban dust traps was on an average more than twice the amount deposited in the rural area. The differences in grain-size distribution and quantity of dust are attributed to the properties of the urban wind field and to various effects of human activity in the city.     

Predicting regional space–time variation of PM2.5 with land-use regression model and MODIS data

Purpose  

Existing land-use regression (LUR) models use land use/cover, population, and traffic information to predict long-term intra-urban variation of air pollution. These models are limited to explaining spatial variation of air pollutants, and few of them are capable of addressing temporal variability. This article proposes a space–time LUR model at a regional scale by incorporating aerosol optical depth (AOD) data from the Moderate Resolution Imaging Spectroradiometer (MODIS).     

Chloroform – concentration gradients in soil air and atmospheric air,and emission fluxes from soil

Since we demonstrated the natural formation of chloroform in soil, the question arose to which extent this contributes to the chloroform present in the atmosphere. Concentration gradients in soil air and atmospheric air of different forests were measured. Chloroform concentration gradients indicating emission occur in forest soils and the atmosphere under the canopy, whereas this was not observed for other chlorinated solvents. Above the canopy all concentration gradients observed for chloroform and 1,1,1-trichloroethane indicate deposition. The emission flux was measured using enclosures and calculated from the observed concentration gradients in soil air and atmospheric air. Wood-degrading areas and soils with a humic layer were found to emit up to 1000 ng chloroform m⁻² h⁻¹ and seem to be larger chloroform sources than the other areas of study. Rather unexpectedly, some points of one sampling site appeared to emit 1,1,1-trichloroethane, tetrachloromethane and tetrachloroethene. A reasonable agreement was found between the fluxes using enclosures and those derived from the concentration gradients in soil air and atmospheric air.     

In vitro biological effects of airborne PM₂.₅ and PM₁₀ from a semi-desert city on the Mexico-US border

Compelling evidence indicates that exposure to urban airborne particulate matter (PM) affects health. However, how PM components interact with PM-size to cause adverse health effects needs elucidation, especially when considering soil and anthropogenic sources. We studied PM from Mexicali, Mexico, where soil particles contribute importantly to air pollution, expecting to differentiate in vitro effects related to PM-size and composition. PM samples with mean aerodynamic diameters ≤2.5μm (PM(2.5)) and ≤10μm (PM(10)) were collected in Mexicali (October 2005-March 2006) from a semi-urban (expected larger participation of soil sources) and an urban (predominately combustion sources) site. Samples were pooled by site and size, analyzed for elemental composition (particle-induced X-ray emission) and tested in vitro for: induction of human erythrocytes membrane disruption (hemolysis) (colorimetrically); inhibition of cell proliferation (ICP) (crystal violet) and TNFα/IL-6 secretion (ELISA) using J774.A1 murine monocytic cells; and DNA degradation using Balb/c3T3 cell naked DNA (electrophoretically). Results of PM elemental composition principal component analysis were used in associating cellular effects. Sixteen elements identified in PM grouped in two principal components: Component(1) (C(1)): Mg, Al, Si, P, Cl, K, Ca, Ti, V, Cr, Fe, and Component(2) (C(2)): Cu, Zn. Hemolysis was predominately induced by semi-urban-PM(10) (p<0.05) and was associated with urban-PM(10)C(1) (r=0.62, p=0.003). Major ICP resulted with semi-urban PM(2.5) (p<0.05). TNFα was mainly induced by urban samples regardless of size (p<0.05) and associated with urban-PM(2.5)C(2) (r=0.48, p=0.02). Both PM(10) samples induced highest DNA degradation (p<0.05), regardless of location. We conclude that PM-size and PM-related soil or anthropogenic elements trigger specific biological-response patterns.     

Hybrid reactor system for wastewater treatment – application and approach of modelling

Wastewater treatment by the hybrid reactor system has become wide-spread as it provides advantages of both the suspended and attached growth phase at the same time. It may be used to treat some rate-limiting substrate, priority pollutants, volatile organic compounds etc. as well as for nitrification. This versatile nature of hybrid reactor demands for a detailed investigation on the mechanism, mode of operation, different applications and major configurations available. The present article is devoted to explore these issues with respect to previous background and successive development in this area. Apart from the laboratory and pilot-scale study, some industrial applications have been overviewed to understand the performance of hybrid reactor in the concerned field. The approach of modelling for the hybrid reactor system is also demonstrated with the hypothetical data set. A comprehensive details about major hybrid processes is presented along with their schematic diagrams. The review on hybrid process revealed that it would be economic for upgradation of existing activated sludge system, ensuring carbonaceous oxidation and nitrification in a single reactor and treatment of slowly bio-degradable substances also.     

Polycyclic aromatic hydrocarbons in air on small spatial and temporal scales – I. Levels and variabilities

Polycyclic aromatic hydrocarbons (PAHs) were measured together with inorganic air pollutants at two urban sites and one rural background site in the Banja Luka area, Bosnia and Hercegovina, during 72 h in July 2008 using a high time resolution (5 samples per day) with the aim to study the spatial and temporal variabilities and to explore the significance of averaging effects inherent to 24 h-sampling. Measurement uncertainty was quantified on basis of three independent side-by-side samplers, deployed at one of the sites.PAH abundances in the urban and rural environments differed largely. Levels at the urban sites exceeded the levels at the rural site by >100%. The discrepancy was largely dominated by emission of 3–4 ring PAHs in the city, while 5–6 ring PAHs were more evenly distributed between city sites and the hill site. During the night a higher fraction of the semivolatile PAHs might have been stored in the soil or sorbed to surfaces. PAH patterns were undistinguishable across the three sites. However, concentrations of more particle-associated substances differed significantly between the urban sites than between one of the urban sites and the rural site (3σ uncertainty). Time-averaging (on a 24 h-basis) would have masked the significant inter-site differences of half of the substances which were found at different levels (on a 4 h-basis).     

Determination of aliphatic and polycyclic aromatic hydrocarbons in atmospheric particulate samples of a coruña city (Spain)

The hydrocarbon composition of atmospheric particulate matter from A Coruña city (Northwest Spain) has been studied. TSP (total suspended particulate) and PM₁₀ (particulate matter with aerodynamic diameter <10 µm) samples were taken over 7 and 4 months at two stations located in residential and industrial sectors of A Coruña city, respectively. The levels of hydrocarbons found in atmospheric particulate samples of A Coruña city are higher than the ones found in other cities over the world. Ratios between the analysed compounds and their sources were established. Both anthropogenic and biogenic origins were found.     

Culture,nature and particulate matter – Hybrid reframings in air pollution scholarship

Air pollution is a thoroughly hybrid phenomenon. It is composed of inseparable physical, scientific, cultural, social, economic and political dimensions. It is both an object of environmental science and embedded in our everyday social and cultural worlds. Nevertheless, much air pollution scholarship focuses solely on the physical dimensions of air pollution which are expressed quantitatively and pays little or no regard to the identities, discourses, bodies and emotions which constitute and are constituted by air pollution as a physical reality. This article argues for a more reflexive and hybrid approach to air pollution research which bridges intellectually confining binaries. Drawing on the work of Bruno Latour and other actor–network theorists, it argues that if we can let go of a foundational nature, disrupt our humanism and take non-scientific knowledges seriously, we might develop a new respect for the atmospheric environment and begin the task of building a better common world.     

Can coral reefs be monitored from space?

The dramatic bleaching events on the coral reefs recently have enhanced the need for environmental monitoring. Remote sensing is an important constituent for monitoring of reefs, and an invaluable complement to field observations. This paper discusses the possibilities and limitations of present high resolution satellites for mapping and monitoring coral reefs. The sensors with the best spatial and radiometric resolution available today, e.g. IKONOS, can be useful for mapping and monitoring of reefs, but they are too costly for global surveys. However, our coral bleaching studies indicate that massive bleaching could be detected even from satellites with lower resolution, like Landsat, SPOT, and IRS. They could also be useful for coarser, from a spatial and thematic point of view, global mapping and updating purposes. A more detailed monitoring requires both better spatial resolution and spectral resolution than today's sensors. In the future, it is necessary to construct a more reef specific sensor with a few specially selected narrow bands and a good spatial, radiometric and temporal resolution.     

Occurrence and dietary exposure risks of phthalate esters in food in the typical valley city Xi’an,Northwest China

Environmental Science and Pollution Research - Diet is an important exposure pathway of phthalate esters (PAEs) for humans. A total of 174 food samples covering 11 food groups were collected from...     

Use of GIS and Moran’s I to support residential solid waste recycling in the city of Annaba,Algeria

Environmental Science and Pollution Research - Urban planners require an understanding of the composition as well as the spatial distribution of household solid waste (HSW) components to design...