The effect of biodiesel on the rate of removal and weathering characteristics of crude oil within artificial sand columns

The physical and chemical properties of crude oils differ greatly, and these properties change significantly once oil is spilled into the marine environment as a result of a number of weathering processes. Quantitative information on the weathering of spilled crude is a fundamental requirement for a fuller understanding of the fate and behaviour of oil in the environment. Additionally, such data are also essential for estimating windows-of-opportunities, where specific response methods, technologies, equipment or products are most effective in clean-up operations. In this study, the effects of a relatively low toxicity compound, biodiesel (rape seed oil methyl ester) on the rate of removal and weathering characteristics of crude oil within artificial sand columns are thoroughly investigated using GC/MS techniques. In the absence of the biodiesel, the crude oil exhibits low mobility and a slow rate of microbial degradation within the sediment and as a result, a high degree of persistance. Brent crude oil was subject to a progressive loss of the low molecular weight n-alkanes with respect to time through evaporation and a preferential migration of these fractions through the sediment to depth. The addition of the biodiesel led to greater recovery of oil from the sediment if applied to relatively unweathered crude oil. This was as the result of the crude oil dissolving within the more mobile biodiesel. The negligible concentration of the n-C₁₀ to n-C₂₁ fraction in surface sediment samples suggests a greater solubility of these fractions within the biodiesel and that their subsequent adsorption onto subsurface sediment particles was responsible for their absence from water flushed through the sands. These results suggest that biodiesel may have an active role in the beach clean-up of spilt crude oil.     

Effect of alkali catalyst on biodiesel production in South Korea from mixtures of fresh soybean oil and waste cooking oil

Biodiesel from waste cooking oil (WCO) and soybean oil (SO) mixture was produced by changing the alkali catalyst (NaOH) content and the WCO to SO ratio in the feedstock. All the prepared biodiesel samples satisfied the standard requirement in terms of free glycerol, density, and acid value. The minimum catalyst content and the highest WCO composition to get biodiesel from the WCO/SO mixture feedstock without ruining the biodiesel properties were 1.0 and 60 wt %, respectively. This conclusion implies that the waste cooking oil mixture, which contains 40 wt % fresh soybean oil, could be treated like the fresh soybean oil to produce biodiesel, and that this behavior would be helpful to reduce the biodiesel production cost when waste cooking oil used as feedstock. The unsaturated methyl esters such as linoleic, and oleic acid were dominant (almost 80 % w/w) in the fresh soybean oil. However the saturated methyl ester was increased due to the double bond breaking during the frying process. These results may deteriorate the biodiesel quality by changing the methyl ester composition.     

Optimization of two-step catalyzed biodiesel production from soybean waste cooking oil

An acid–base-catalyst-based two-step biodiesel production experiment from soybean waste cooking oil was carried out to identify which parameter is the most influential among the experimental parameters by using the Taguchi method. Heterogeneous catalysts were used to avoid a water-consuming homogeneous catalyst removal process. Ferric sulfate and calcium oxide were used as acid and base catalysts, respectively, for the heterogeneous reaction. Reaction time and methanol-to-triglyceride mole ratio were significant factors. The optimum parameters for step 1 (acid esterification) were 4 h of reaction time, 4 wt. % of ferric sulfate amount, a 16:1 methanol to triglyceride mole ratio, and 400 rpm of mixing speed, respectively. For the transesterification step, the most influential factor was reaction time, and CaO amount was significant as well. On the other hand, the mole ratio of methanol and oil was relatively less significant. Optimum parameters were 3 h of reaction time, 2 wt. % of CaO, and a 12:1 methanol to triglyceride mole ratio with mixing speed at 400 rpm in this experimental range. Under the optimum conditions, waste cooking oil with 5.27 mg KOH/g of acid value was converted into crude biodiesel by a two-step process with fatty acid methyl ester content reaching 89.8 % without any further post-purification.     

过氧化氢、过碳酸钠活化过硫酸钠氧化—微生物降解联用技术修复原油污染土壤

分别以H₂O₂和Na₂CO₃·1.5H₂O₂活化Na₂S₂O₄降解原油污染土壤,考察氧化后土壤的原油降解率、pH、微生物含量以及原油组分的变化,比较两种活化剂对过硫酸钠氧化—微生物降解联用技术修复原油污染土壤效果的影响。实验结果表明：两种活化剂氧化处理7 d后的最大原油降解率分别达到42.94%和44.07%;氧化后原油组分的占比情况发生变化,w（饱和烃）增加5.28~11.93个百分点,而w（芳香烃）、w（胶质）和w（沥青质）则分别降低了0.10~2.53,2.53~3.80,0.94~3.43个百分点;添加微生物菌剂进行50 d的生物降解后,两种活化剂的最大原油降解率分别达到71.00%和75.70%,比单独微生物降解时提高了5.96~12.08个百分点。     

高效石油烃降解菌的筛选及其对原油污染土壤的修复

从陕北原油污染土壤中筛选出7株高效石油烃降解菌,其中黄杆菌属CC-2、不动细菌属SC-5、假单胞菌属SC-6表现出较强的石油烃降解能力。通过单因素试验和正交试验考察总石油烃(TPH)降解效果的影响因素,得出各因素对TPH降解率影响程度的大小次序为:溶液p H降解温度降解菌接种量摇床转速,且在降解菌接种量为7%(φ)、溶液p H为7、降解温度为30℃、摇床转速为150 r/min的最适处理条件下,菌株SC-6的TPH降解率可达61.23%。原油污染土壤生物修复实验结果表明:高效石油烃降解菌的投加有利于土壤TPH降解率和酶活性的提高;"菌株SC-6+营养剂"组修复处理42 d后的TPH降解率可达57.59%。     

Oil Erosion in an Annular Flume by Seawater of Varying Turbidities: A Critical Bed Shear Stress Approach

Laboratory experiments were conducted in an annular flume using Hibernia crude oil to determine: (1) the critical shear stress (τ_c) necessary to remove stranded oil from a surface by resuspension and (2) the effect of suspended sediment concentrations (SSCs) on the oil erosion processes. Two types of erosion were evident: Type I––solution and erosion of soluble aromatics; and Type II––mass erosion of visible droplets. In particulate free seawater at 13 °C, the Type II erosion threshold τ_cII is 5.0 Pa. This is equivalent to a mean current velocity (U_y) of 0.55 m s⁻¹. At U_y values <0.55 m s⁻¹, Type I erosion occurred as shown by the increase of oil concentrations without visible erosion of the oil surface. Temperature has a strong control on the threshold and rate of oil erosion: the threshold for Type I erosion at 4 °C was higher and erosion rate lower than at 13 °C. No Type II erosion was observed at 4 °C. SSCs also affects the entrainment of oil. Oil erosion was most efficient at moderate SSCs. At very high SSCs, turbulence suppression and drag reduction became effective and oil erosion rate decreased. SSC at 200–250 mg l⁻¹ were observed to give maximum erosion efficiency and is therefore suggested as the optimal concentration for erosion and elimination of heavy crude oil at a water temperature of 13 °C.     

Sequential production of pyrolytic oil and biodiesel from oil-bearing biomass

Oil extraction from the oil-bearing biomass and waste materials has been considered as one of the biggest challenges in the biodiesel production process because it has been considered as the most energy- and cost-demanding step. This work provides a promising approach for the direct transformation without oil extraction from calcined montmorillonite clay (CMC) and microalgae by means of the non-catalytic thermo-chemical process in conjunction with the real continuous flow system. The introduced method showed the high tolerance of water, impurities, and free fatty acids (FFAs), which enable the combination of the esterification of FFAs and transesterification of triglycerides into a single step without the lipid extraction. For example, this study showed that the maximum achievable yield of biodiesel via the introduced methodology was 97 ± 0.5 % at the temperature regime of 380–480 °C and this biodiesel yield was enhanced in the presence of CO₂. Thus, the introduced methodology for producing biodiesel could be an alternative way of the methanol liquefaction and transesterification under supercritical conditions.     

Lysinibacillus sphaericus and Geobacillus sp Biodegradation of Petroleum Hydrocarbons and Biosurfactant Production

Petroleum oil is a major driver of worldwide economic activity, but it has also created contamination problems during the storage and refining process. Also, unconventional resources are natural resources, which require greater than industry‐standard levels of technology or investment to exploit. In the case of unconventional hydrocarbon resources, additional technology, energy, and capital have to be applied to extract the gas or oil. Bioremediation of petroleum spill is considered of great importance due to the contaminating effects on human health and the environment. For this reason, it is important to reduce total petroleum hydrocarbons (TPH) in contaminated soil. In addition, biosurfactant production is a desirable property of hydrocarbon‐degrading microorganisms. Seven strains belonging to Lysinibacillus sphaericus and Geobacillus sp were selected to evaluate their ability to biodegrade TPH in the presence of toxic metals, their potential to produce biosurfactants, and their ability to improve the biodegradation rate. The seven bacterial strains examined in this study were able to utilize crude petroleum‐oil hydrocarbons as the sole source of carbon and energy. In addition, their ability to degrade crude oil was not affected by the presence of toxic metals such as chromium and arsenic. At the same time, the strains were able to reduce toxic metals concentration through biosorption processes. Biosurfactant production was determined using the drop‐collapsed method for all strains, and they were characterized as both anionic and cationic biosurfactants. Biosurfactants showed an increase in biodegradation efficiency both in liquid minimal salt medium and landfarming treatments. The final results in field tests showed an efficiency of 93 percent reduction in crude oil concentration by the selected consortium compared to soil without consortium. The authors propose L. sphaericus and Geobacillus sp consortium as an optimum treatment for contaminated soils. In addition, production of biosurfactants could have an application in the extraction of crude oil from unconventional hydrocarbon resources. © 2014 Wiley Periodicals, Inc.     

Recovery of different waste vegetable oils for biodiesel production: A pilot experience in Bahia State,Brazil

In Brazil, and mainly in the State of Bahia, crude vegetable oils are widely used in the preparation of food. Street stalls, restaurants and canteens make a great use of palm oil and soybean oil. There is also some use of castor oil, which is widely cultivated in the Sertão Region (within the State of Bahia), and widely applied in industry. This massive use in food preparation leads to a huge amount of waste oil of different types, which needs either to be properly disposed of, or recovered. At the Laboratorio Energia e Gas-LEN (Energy & Gas lab.) of the Universidade Federal da Bahia, a cycle of experiments were carried out to evaluate the recovery of waste oils for biodiesel production. The experiences were carried out on a laboratory scale and, in a semi-industrial pilot plant using waste oils of different qualities. In the transesterification process, applied waste vegetable oils were reacted with methanol with the support of a basic catalyst, such as NaOH or KOH. The conversion rate settled at between 81% and 85% (in weight). The most suitable molar ratio of waste oils to alcohol was 1:6, and the amount of catalyst required was 0.5% (of the weight of the incoming oil), in the case of NaOH, and 1%, in case of KOH.The quality of the biodiesel produced was tested to determine the final product quality. The parameters analyzed were the acid value, kinematic viscosity, monoglycerides, diglycerides, triglycerides, free glycerine, total glycerine, clearness; the conversion yield of the process was also evaluated.     

Growth performance and proximate profile of Telfairia occidentalis Hook F. (cucurbitaceae) grown in crude oil‒contaminated soil

In this study, the growth performance and nutritional quality of Telfairia occidentalis planted in soil polluted with varied levels of water‐soluble fraction (WSF) of crude oil (Bonny light) were evaluated to assess the effectiveness of organic nutrients (poultry manure and sawdust) in the phytore mediation of WSF‐contaminated soil. The results showed that WSF application delayed germination of vegetables. However, treatment of soils with organic nutrients enhanced the germination rate of vegetables, promoted greenish coloration of leafs and increased the levels of energy‐yielding macronutrients (carbohydrate, lipid, and protein). Also, soils supplemented with poultry manure gave the highest caloric values for all the percentages of WSF studied, followed by sawdust. Our findings suggest that the adverse effects of WSF on soil could be remediated through organic nutrient supplementation. © 2006 Wiley Periodicals, Inc.     

Composition and Toxicity of Residual Bunker C Fuel Oil in Intertidal Sediments After 30 Years

In 1970, approximately 2000 m³ of Bunker C crude oil impacted 300 km of Nova Scotia’s coastline following the grounding of the tanker Arrow. Only 10% of the contaminated coast was subjected to cleanup, the remainder was left to cleanse naturally. To determine the long-term environmental impact of residual oil from this spill event, samples of sediment and interstitial water were recovered in 1993, 1997 and 2000 from a sheltered lagoon in Black Duck Cove. This heavily oiled site was intentionally left to recover on its own. Visual observations and chemical analysis confirmed that substantial quantities of the weathered cargo oil were still present within the sediments at this site. However, direct observations of benthic invertebrate abundance suggest that natural processes have reduced the impacts of the residual oil. To confirm this hypothesis, sediment and interstitial water samples from Black Duck Cove were assessed with a comprehensive set of biotests and chemical assays.Residual oil in the sediments had limited effect on hepatic CYP1A protein levels and mixed function oxygenase (MFO) induction in winter flounder (Pleuronectes americanus). No toxicity was detected with the Microtox solid phase test (Vibrio fischeri). Significant sediment toxicity was detected by the amphipod survival test (Eohaustorius estuarius) in four out of the eight contaminated sediments. Interstitial water samples were deemed non-toxic by the Microtox 100% test (Vibrio fischeri) and the echinoid fertilization test (Lytechinus pictus). Sediment elutriates were also found to be non-toxic in the grass shrimp embryo-larval toxicity (GSELTOX) test (Palaemonetes pugio).Recovery at this contaminated site is attributed to natural processes that mediated biodegradation and physical removal of oil from the sediments. In support of the latter mechanism, mineralization experiments showed that all test sediments had the capacity for hexadecane, octacosane and naphthalene degradation, while chemical analysis confirmed that the Bunker C oil from the Arrow had undergone substantial biodegradation.     

Biodegradation of Dispersed Forties Crude and Alaskan North Slope Oils in Microcosms Under Simulated Marine Conditions

For oil spills in the open sea, operational experience has found that conventional response techniques, such as mechanical recovery, tend to remove only a small fraction of oil during major spills, a recent exception being the Mississippi River spill in Louisiana [Spill Sci. Technol. Bull. 7 (2002) 155]. By contrast, the use of dispersants can enable significant fractions of oil to be removed from the sea surface by dispersing the oil into the water column. It is thought that once dispersed the oil can biodegrade in the water column, although there is little information on the mechanism and rate of biodegradation. Two studies were undertaken on dispersion, microbial colonisation and biodegradation of Forties crude and Alaskan North Slope (ANS) oils under simulated marine conditions. The study using the Forties crude lasted 27 days and was carried out in conditions simulating estuarine and coastal conditions in waters around the UK (15 °C and in the presence of nutrients, 1 mg N-NO₃/l), while the ANS study simulated low temperature conditions typical of Prince William Sound (8 °C) and took place over 35 days. The results of both studies demonstrated microbial colonisation of oil droplets after 4 days, and the formation of neutrally buoyant clusters consisting of oil, bacteria, protozoa and nematodes. By day 16, the size of the clusters increased and they sank to the bottom of the microcosms, presumably because of a decrease in buoyancy due to oil biodegradation, however biodegradation of n-alkanes was confirmed only in the Forties study. No colonisation or biodegradation of oil was noted in the controls in which biological action was inhibited. Oil degrading bacteria proliferated in all biologically active microcosms. Without dispersant, the onset of colonisation was delayed, although microbial growth rates and population size in ANS were greater than observed with the Forties. This difference reflected the greater droplet number seen with ANS at 8 °C than with Forties crude at 15 °C. Although these studies differed by more than one variable, complicating comparison, the findings suggest that dispersion (natural or chemical) changes the impact of the oil on the marine environment, potentially having important implications for management of oil spills in relation to the policy of dispersant use in an oil spill event.     

Biodiesel production from vegetable oil and waste animal fats in a pilot plant

In this study, corn oil as vegetable oil, chicken fat and fleshing oil as animal fats were used to produce methyl ester in a biodiesel pilot plant. The FFA level of the corn oil was below 1% while those of animal fats were too high to produce biodiesel via base catalyst. Therefore, it was needed to perform pretreatment reaction for the animal fats. For this aim, sulfuric acid was used as catalyst and methanol was used as alcohol in the pretreatment reactions. After reducing the FFA level of the animal fats to less than 1%, the transesterification reaction was completed with alkaline catalyst. Due to low FFA content of corn oil, it was directly subjected to transesterification. Potassium hydroxide was used as catalyst and methanol was used as alcohol for transesterification reactions. The fuel properties of methyl esters produced in the biodiesel pilot plant were characterized and compared to EN 14214 and ASTM D6751 biodiesel standards. According to the results, ester yield values of animal fat methyl esters were slightly lower than that of the corn oil methyl ester (COME). The production cost of COME was higher than those of animal fat methyl esters due to being high cost biodiesel feedstock. The fuel properties of produced methyl esters were close to each other. Especially, the sulfur content and cold flow properties of the COME were lower than those of animal fat methyl esters. The measured fuel properties of all produced methyl esters met ASTM D6751 (S500) biodiesel fuel standards.     

A bibliometric analysis of biodiesel research during 1991–2015

A bibliometric analysis based on the Science Citation Index Expanded (SCI-EXPANDED) from the Web of Science was carried out to provide insights into research activities and tendencies of the global biodiesel from 1991 to 2015. The document type and language, characteristics of publication outputs, Web of Science categories, journals, countries, institutions, author keyword and most cited articles were emphasized. The results indicated that annual output of the related scientific articles increased steadily. The top six categories focus on different aspects of biodiesel research. Bioresource Technology and Fuel were the two most frequent journals in the field of biodiesel research. The USA took a leading position and had the highest h-index (108) out of 122 countries/territories, followed by China and Brazil. Finally, author keywords and most cited articles were analyzed, indicating that microalgae, Jatropha curcas, vegetable oil and waste cooking oil are the most general raw materials for biodiesel production.     

Disposal of oil in sandy coastal soils

A combination of survey and experimental studies is being conducted to determine the ecological risks associated with disposal of oiled beach material (OBM) in coastal sand dunes and dune pastures. Past incidence of burial close to shoreline spill locations was less than expected and the two sites located in Britain showed very different patterns of oil degradation and site recovery. Field scale experiments revealed that breakdown of hydrocarbons within OBM began very quickly after deposition, even in nutrient-poor sand, leading to almost complete degradation of crude oil. There appears to be no lateral or vertical loss of oil or its breakdown products and recolonization of deposited OBM does occur naturally, though supplementary planting helps in stabilizing the sand surface. The application of this method in practical terms is constrained by the availability of suitable sites where it is possible to minimize physical disturbance to dune systems by lorries or other equipment employed in the removal process.     

Biodiesel production from waste frying oils and its quality control

The use of biodiesel as fuel from alternative sources has increased considerably over recent years, affording numerous environmental benefits. Biodiesel an alternative fuel for diesel engines is produced from renewable sources such as vegetable oils or animal fats. However, the high costs implicated in marketing biodiesel constitute a major obstacle. To this regard therefore, the use of waste frying oils (WFO) should produce a marked reduction in the cost of biodiesel due to the ready availability of WFO at a relatively low price.In the present study waste frying oils collected from several McDonald’s restaurants in Istanbul, were used to produce biodiesel. Biodiesel from WFO was prepared by means of three different transesterification processes: a one-step base-catalyzed, a two-step base-catalyzed and a two-step acid-catalyzed transesterification followed by base transesterification. No detailed previous studies providing information for a two-step acid-catalyzed transesterification followed by a base (CH₃ONa) transesterification are present in literature. Each reaction was allowed to take place with and without tetrahydrofuran added as a co-solvent. Following production, three different procedures; washing with distilled water, dry wash with magnesol and using ion-exchange resin were applied to purify biodiesel and the best outcome determined. The biodiesel obtained to verify compliance with the European Standard 14214 (EN 14214), which also corresponds to Turkish Biodiesel Standards.     

表面活性剂对土壤中石油污染物的解吸

采用4种表面活性剂解吸老化石油污染土壤中的污染物,对其解吸动力学特征及残油组分进行了分析。实验结果表明:在表面活性剂质量浓度相同(0.5 g/L)条件下,土壤中石油污染物解吸率的大小顺序为十二烷基硫酸钠(SDS)曲拉通X-100(TX-100)吐温-80(TW-80)十二烷基苯磺酸钠(SDBS);SDS的解吸率最高,经48 h累积解吸后土壤中石油污染物的解吸率为38.7%;表面活性剂对石油污染物的解吸动力学曲线用Elovich方程拟合,效果最好,相关系数为0.970 2~0.995 6;非离子表面活性剂(TX-100、TW-80)对石油污染物中饱和烃组分的解吸率优于阴离子表面活性剂(SDS、SDBS),而对芳香烃组分的解吸率不如阴离子表面活性剂。     

Value addition of vegetable wastes by solid-state fermentation using Aspergillus niger for use in aquafeed industry

Vegetable waste typically has high moisture content and high levels of protein, vitamins and minerals. Its value as an agricultural feed can be enhanced through solid-state fermentation (SSF). Two experiments were conducted to evaluate the nutritional status of the products derived by SSF of a mixture of dried vegetable waste powder and oil cake mixture (soybean flour, wheat flour, groundnut oil cake and sesame oil cake at 4:3:2:1 ratio) using fungi Aspergillus niger S₁4, a mangrove isolate, and A. niger NCIM 616. Fermentation was carried out for 9 days at 35% moisture level and neutral pH. Significant (p < 0.05) increase in crude protein and amino acids were obtained in both the trials. The crude fat and crude fibre content showed significant reduction at the end of fermentation. Nitrogen free extract (NFE) showed a gradual decrease during the fermentation process. The results of the study suggest that the fermented product obtained on days 6 and 9 in case of A. niger S₁4 and A. niger NCIM 616 respectively contained the highest levels of crude protein.     

Release Characteristics of Nutrients from Polymer-coated Compound Controlled Release Fertilizers

Reliable information regarding release characteristics of nutrients from a polymer-coated controlled release fertilizer (CRF) is essential for beneficial agronomic and environmental results. Significant knowledge regarding nitrogen release from polymer-coated urea was gained while the information regarding the release of the different nutrients contained in polymer-coated compound N–P–K CRF remains limited. An experiment in which major factors affecting the differential release of nutrients from two coated compound CRF was performed in free water, water saturated sand and sand at field capacity. In general, nitrate release was the fastest, followed by ammonium and potassium whereas phosphate was significantly slower, with a rate of linear release in free water 45–70% slower than that of nitrate. Little differences were obtained for the lag periods of nitrate, ammonium and potassium release (2–10 days) under the experimental conditions, whereas for P they were one order of magnitude larger. The main factor slowing the release was assumed to be the lower solubility of ions with P being the least soluble. Release into free water was, expectedly, somewhat faster than that into saturated sand and significantly faster as compared to sand at field capacity and particularly so for P. Raising the temperature from 20 °C to 40 °C increased the rate of linear release of the different nutrients. The energy of activation, EA_rel, estimated for the linear release, of the different nutrients, was narrow ranging between 37 to 46 (KJ mol⁻¹) whereas the mean values obtained for the two CRF, differing by 50% in coating thickness, was non-significant. However, EA_rel was significantly different in different media. The complex effect of temperature on the lag period and nutrient interactions during release deserve further investigation.     

Recycling of biodiesel fuel wastewater for use as a liquid fertilizer for hydroponics

Wastewater is discharged during washing processes in the production of biodiesel fuel (BDF) using alkaline catalysts. It can be recycled as a liquid fertilizer for hydroponics by adding essential components for plant growth. The effects of the liquid fertilizer on plant growth were investigated. Liquid fertilizer containing a smaller amount of the BDF wastewater had a similar effect on plant growth as the standard nutrient solutions. This result reveals that BDF wastewater can be recycled for use as a liquid fertilizer for hydroponics. However, fertilizer with a larger amount of the BDF wastewater showed poor and varied plant growth due to the growth of microorganisms in the contaminated wastewater. Hence, when BDF wastewater becomes contaminated during storage, sterilization is necessary to recycle it as a liquid fertilizer. Moreover, contamination during storage should be avoided for successful recycling.