An adaptive reduction algorithm for efficient chemical calculations in global atmospheric chemistry models

We present a computationally efficient adaptive method for calculating the time evolution of the concentrations of chemical species in global 3-D models of atmospheric chemistry. Our strategy consists of partitioning the computational domain into fast and slow regions for each chemical species at every time step. In each grid box, we group the fast species and solve for their concentration in a coupled fashion. Concentrations of the slow species are calculated using a simple semi-implicit formula. Separation of species between fast and slow is done on the fly based on their local production and loss rates. This allows for example to exclude short-lived volatile organic compounds (VOCs) and their oxidation products from chemical calculations in the remote troposphere where their concentrations are negligible, letting the simulation determine the exclusion domain and allowing species to drop out individually from the coupled chemical calculation as their production/loss rates decline. We applied our method to a 1-year simulation of global tropospheric ozone-NO_x-VOC-aerosol chemistry using the GEOS-Chem model. Results show a 50% improvement in computational performance for the chemical solver, with no significant added error.     

Sources and deposition of reactive gaseous mercury in the marine atmosphere

Observations of reactive gaseous mercury (RGM) in marine air show a consistent diurnal cycle with minimum at night, rapid increase at sunrise, maximum at midday, and rapid decline in afternoon. We use a box model for the marine boundary layer (MBL) to interpret these observations in terms of RGM sources and sinks. The morning rise and midday maximum are consistent with oxidation of elemental mercury (Hg⁰) by Br atoms, requiring <2 ppt BrO in most conditions. Oxidation of Hg⁰ by Br accounts for 35–60% of the RGM source in our model MBL, with most of the remainder contributed by oxidation of Hg⁰ by ozone (5–20%) and entrainment of RGM-rich air from the free troposphere (25–40%). Oxidation of Hg⁰ by Cl is minor (3–7%), and oxidation by OH cannot reproduce the observed RGM diurnal cycle, suggesting that it is unimportant. Fitting the RGM observations could be achieved in the model without oxidation of Hg⁰ by ozone (leaving Br as the only significant oxidant) by increasing the entrainment flux from the free troposphere. The large relative diurnal amplitude of RGM concentrations implies rapid loss with a lifetime of only a few hours. We show that this can be quantitatively explained by rapid, mass-transfer-limited uptake of RGM into sea-salt aerosols as HgCl₃^? and HgCl₄^2?. Our results suggest that 80–95% of Hg^II in the MBL should be present in sea-salt aerosol rather than gas-phase, and that deposition of sea-salt aerosols is the major pathway delivering Hg^II to the ocean.     

Atmospheric composition change: Climate–Chemistry interactions

Chemically active climate compounds are either primary compounds like methane (CH₄), removed by oxidation in the atmosphere, or secondary compounds like ozone (O₃), sulfate and organic aerosols, both formed and removed in the atmosphere. Man-induced climate–chemistry interaction is a two-way process: Emissions of pollutants change the atmospheric composition contributing to climate change through the aforementioned climate components, and climate change, through changes in temperature, dynamics, the hydrological cycle, atmospheric stability, and biosphere-atmosphere interactions, affects the atmospheric composition and oxidation processes in the troposphere. Here we present progress in our understanding of processes of importance for climate–chemistry interactions, and their contributions to changes in atmospheric composition and climate forcing. A key factor is the oxidation potential involving compounds like O₃ and the hydroxyl radical (OH). Reported studies represent both current and future changes. Reported results include new estimates of radiative forcing based on extensive model studies of chemically active climate compounds like O₃, and of particles inducing both direct and indirect effects. Through EU projects like ACCENT, QUANTIFY, and the AeroCom project, extensive studies on regional and sector-wise differences in the impact on atmospheric distribution are performed. Studies have shown that land-based emissions have a different effect on climate than ship and aircraft emissions, and different measures are needed to reduce the climate impact. Several areas where climate change can affect the tropospheric oxidation process and the chemical composition are identified. This can take place through enhanced stratospheric–tropospheric exchange of ozone, more frequent periods with stable conditions favoring pollution build up over industrial areas, enhanced temperature induced biogenic emissions, methane releases from permafrost thawing, and enhanced concentration through reduced biospheric uptake. During the last 5–10 years, new observational data have been made available and used for model validation and the study of atmospheric processes. Although there are significant uncertainties in the modeling of composition changes, access to new observational data has improved modeling capability. Emission scenarios for the coming decades have a large uncertainty range, in particular with respect to regional trends, leading to a significant uncertainty range in estimated regional composition changes and climate impact.     

Stable carbon kinetic isotope effects for the production of methacrolein and methyl vinyl ketone from the gas-phase reactions of isoprene with ozone and hydroxyl radicals

The stable-carbon kinetic isotope effects (KIEs) associated with the production of methacrolein (MACR) and methyl vinyl ketone (MVK) from the reactions of isoprene with ozone and OH radicals were studied in a 25 L reaction chamber at (298±2) K and ambient pressure. The time dependence of both the stable-carbon isotope ratios and the concentrations was determined using a gas chromatography combustion isotope ratio mass spectrometry (GCC-IRMS) system. The average yields of ¹³C-containing MACR and MVK generated from the ozone reaction of ¹³C-containing isoprene differed by ?3.6‰ and ?4.5‰, respectively, from the yields for MACR and MVK containing only ¹²C. For MACR and MVK generated from the OH-radical oxidation of isoprene the corresponding values were ?3.8‰ and ?2.2‰, respectively. These values indicate a significant depletion in the ¹³C abundance of MACR and MVK upon their formation relative to isoprene’s pre-reaction ¹³C/¹²C ratio, which is supported by theoretical interpretations of the oxidation mechanism of isoprene and its ¹³C-substituted isotopomers. Numerical model calculations of the isoprene + O₃ reaction predicted a similar depletion in ¹³C for both reaction products upon production. Furthermore, the model predicts mixing ratios and stable carbon delta values for isoprene, MACR, and MVK that were in agreement with the experimental results. The combined knowledge of isotope enrichment values with KIEs will reduce uncertainties in determinations of the photochemical histories of isoprene, MACR, and MVK in the troposphere. The studies presented here were conducted with using isoprene without any artificial isotope enrichment or depletion and it is therefore very likely that these results are directly applicable to the interpretation of studies of isoprene oxidation using stable carbon isotope ratio measurements.     

The Impact of Stratospheric Ozone on Tropospheric Air Quality

A background of ozone (O₃), principally of stratospheric origin, is present in the lower free troposphere. Typical mean O₃ levels of 50 ppb, 40 ppb, and 30 ppb are encountered here in spring, summer, and fall, respectively. Maximum hourly O₃ concentrations which are twice these mean values can be expected. Ozone from the free troposphere is routinely brought down to ground level under turbulent atmospheric conditions. Deep and rapid Intrusions of stratospheric air into the lower troposphere are associated with low-pressure troughs and occur regularly. In the mid troposphere, O₃ levels as high as 300 ppb are found within these intrusions. Observational data showing these intrusions, containing high O₃ concentrations, to directly reach ground level are currently lacking. Over the United States, an intrusion was present aloft on 8 9% of the days in 1978. The frequency, however, is somewhat reduced in summer and a northward movement is evident. During 1978, no intrusion occurred south of 30°N between June and August and none south of 40 °N in August.

The hypothesis that low levels of stratospheric O₃ produce disproportionately large amounts of O₃ in the polluted atmosphere cannot be supported from currently known chemistry but should be studied further. The experimental technique involving a ⁷Be/O₃ ratio to estimate the daily stratospheric component of ground level O₃ is unverified and considered to be inadequate for air quality applications. Estimates resulting from such a technique are considered uncertain by a factor of more than three. Specially designed aircraft studies provide the best means to determine quantitatively the impact of stratospheric O₃ on ground level air quality.     

Gas-phase tropospheric chemistry of organic compounds: a review

The current knowledge of the gas-phase reactions occurring in the troposphere for alkanes, alkenes, alkynes, oxygenates and aromatic hydrocarbons and their photooxidation products is reviewed,and areas of uncertainty identified.     

Modeling secondary organic aerosol formation from oxidation of α-pinene, β-pinene, and d-limonene

The biogenic species α-pinene, β-pinene, and d-limonene are among the most abundant monoterpenes emitted globally. They are also important precursors to secondary organic aerosol (SOA) formation in the atmosphere. This study involves the development of proposed oxidation mechanisms for these three species. Semi- and non-volatile oxidation products with the potential to lead to SOA formation are predicted explicitly. Simulation code that describes the gas-phase oxidation mechanisms including reactions that lead to ozone (O₃) formation is coupled to an equilibrium absorptive partitioning code. The coupled model is used to simulate both gas-phase chemistry and SOA formation associated with oxidation of these three species in chamber experiments involving single as well as multiple oxidants. For the partitioning model, required molecular properties of the oxidation products are taken from the literature or estimated based on structural characteristics. The predicted O₃ and SOA concentrations are typically within ±50% of measured values for most of the experiments except for the experiments with low initial hydrocarbon concentrations and the nitrate radical experiments with α-pinene. The developed model will be used to update a gas-phase chemical mechanism and a SOA formation module used in a three-dimensional air quality model.     

The role of halogen species in the troposphere

While the role of reactive halogen species (e.g. Cl, Br) in the destruction of the stratospheric ozone layer is well known, their role in the troposphere was investigated only since their destructive effect on boundary layer ozone after polar sunrise became obvious. During these 'Polar Tropospheric Ozone Hole' events O(3) is completely destroyed in the lowest approximately 1000 m of the atmosphere on areas of several million square kilometres. Up to now it was assumed that these events were confined to the polar regions during springtime. However, during the last few years significant amounts of BrO and Cl-atoms were also found outside the Arctic and Antarctic boundary layer. Recently even higher BrO mixing ratios (up to 176 ppt) were detected by optical absorption spectroscopy (DOAS) in the Dead Sea basin during summer. In addition, evidence is accumulating that BrO (at levels around 1-2 ppt) is also occurring in the free troposphere at all latitudes.In contrast to the stratosphere, where halogens are released from species, which are very long lived in the troposphere, likely sources of boundary layer Br and Cl are autocatalytic oxidation of sea salt halides (the 'Bromine Explosion'), while precursors of free tropospheric BrO and coastal IO probably are short-lived organo-halogen species. At the levels suggested by the available measurements reactive halogen species have a profound effect on tropospheric chemistry: In the polar boundary layer during 'halogen events' ozone is usually completely lost within hours or days. In the free troposphere the effective O(3)-losses due to halogens could be comparable to the known photochemical O(3) destruction. Further interesting consequences include the increase of OH levels and (at low NO(X)) the decrease of the HO(2)/OH ratio in the free troposphere.     

Modelling NOx from lightning and its impact on global chemical fields

We have used a three-dimensional off-line chemical transport model (CTM) to assess the impact of lightning emissions in the free troposphere both on NO_x itself and on other chemical species such as O₃ and OH. We have investigated these effects using two lightning emission scenarios. In the first, lightning emissions are coupled in space and time to the convective cloud top height calculated every 6 h by the CTM's moist convection scheme. In the second, lightning emissions are calculated as a constant, monthly mean field. The model's performance against observed profiles of NO_x and O₃ in the Atlantic and Pacific ocean improves significantly when lightning emissions are included. With the inclusion of these emissions, the CTM produces a significant increase in the NO_x concentrations in the upper troposphere, where the NO_x lifetime is long, and a smaller increase in the lower free troposphere, where the surface NO_x sources dominate. These changes cause a significant increase in the O₃ production in the upper troposphere and hence higher calculated O₃ there. The model indicates that lightning emissions cause local increases of over 50 parts per 10¹² by volume (pptv) in NO_x, 200 pptv in HNO₃ and 20 parts per 10⁹ by volume (ppbv) (>40%) in O₃. In addition, a smaller increase of O₃ in the lower troposphere occurs due to an increase in the downward transport of O₃. The O₃ change is accompanied by an increase in OH which is more pronounced in the upper troposphere with a corresponding reduction in CO. The method of emission employed in the model does not appear to have a significant effect globally. In the upper troposphere (above about 300 hPa) NO_x concentrations are generally lower with monthly mean emissions, because of the de-coupling of emissions from the model's convection scheme, which vents NO_x aloft more efficiently in the coupled scheme. Below the local convective outflow altitude, NO_x concentrations are larger when using the monthly mean emissions than when coupled to the convection scheme, because the more dilute emissions, and nighttime emissions, lead to a slower NO_x destruction rate. Only minor changes are predicted in the monthly average fields of O₃ if we emit lightning as a monthly constant field. However, the method of emission becomes important when we make a direct comparison of model results with time varying data. These differences should be taken into account when a direct comparison of O₃ with measurements collected at particular times and locations is attempted.     

The aqueous oxidation of SO2 by OH radicals

The reaction of aqueous hydroxyl radicals with bisulphite ion has been proposed as a significant and in some cases a primary pathway by which SO₂ is oxidized to sulphate in tropospheric cloud. It is shown that many uncertainties still remain with regard to the kinetics and mechanism of this oxidation process. Illustrative computations indicate that reaction schemes taking account of the aqueous oxidation of SO₂ by OH in existing models of cloud chemistry are inconsistent with the mechanisms on which they are based and yield a wide range of oxidation rates. Calculations are presented which suggest that the reaction of the SO₅⁻ radical with bisulphite ion is rate determining, although the rate constant remains uncertain. The products of this reaction must be identified before the mechanism of sulphate production can be elucidated and the relevance of this process to tropospheric SO₂ oxidation reliably assessed.     

Modeling of the long-term tropospheric trends of hydroxyl radical for the Northern Hemisphere

The MGO 2D (altitude–longitude) channel photochemical transport model has been applied to elucidate the spatial and temporal behavior of the hydroxyl radical in the troposphere of the northern temperate belt for the pre-industrial (1850) period and the last few decades (1960 and 1995). The relation between the tropospheric OH content and the carbon monoxide, methane, nitrogen oxides emissions during 1850–1995 is studied. The distribution of the carbon monoxide concentration is calculated and validated using the observational data collected in the different locations because of the geographical non-homogeneity of its emissions. The response of the hydroxyl radical concentrations to the non-homogeneity of the CO and other atmospheric species distribution is estimated. The carbon monoxide and methane contributions to the hydroxyl photochemical sink are also evaluated. Because the changes of OH in the troposphere alternate the intensity of methane and carbon monoxide oxidation, the CO, CH₄ and OH lifetime evolution due to the increase of anthropogenic pollution intensity is analyzed and discussed.     

The use of anthracene as a model compound in a comparative study of hydrous pyrolysis methods for industrial waste remediation

Polycyclic aromatic hydrocarbons are very stable compounds and tend to bioaccumulate in the environment due to their high degree of conjugation and aromaticity. Hydrous pyrolysis is explored as a technique for the treatment of industrial water containing PAH, using anthracene as a model compound. The reactivity of anthracene under a range of temperatures and durations are studied in this paper. Aliquots of 1.0-10.0 mg of anthracene in a range of 1.0-5.0 mL of H₂O are subjected to hydrous pyrolysis under varied conditions of temperature, reagents and duration. The conditions include oxidising systems comprising distilled water, hydrogen peroxide and Nafion-SiO₂ solid catalyst in water; and reducing systems of formic acid and formic acid/Nafion-SiO₂/Pd-C catalysts to assess a range of redox reaction conditions. Oxygen in air played a role in some of the reaction conditions. Pyrolysed products were identified and quantified by the use of Gas Chromatography-Mass Spectrometry (GC-MS). The major products were anthrone, anthraquinone, xanthone from oxidation; and multiple hydro-anthracene derivatives from reductive hydogenation. The nature of reaction conditions influenced the extent of anthracene degradation. The products formed are more reactive (less stable) as compared to anthracene the starting material and will therefore be less persistent in the environment.     

FT-IR product study of the OH-initiated oxidation of DMS in the presence of NOx

The influence of NO_x (NO+NO₂) concentrations on the product distribution of the OH-initiated oxidation of DMS has been studied at room temperature using total NO_x concentrations varying from 0 to ∼1800 ppbv (30–600 ppbv NO₂ and 140–1760 ppbv NO). Clear trends in the formation yields of the products SO₂, COS, MSA, MTF (methyl thiolformate), MSPN (methanesulphonyl peroxynitrate), DMSO and DMSO₂ have been observed with variation in NO_x. The presence of low levels of NO reduces the yields of both MTF and COS to zero. The formation yields of MSA and DMSO₂ increase with increasing NO_x concentration, whereas the yields of DMSO and SO₂ decrease. The following approximate changes in the yield, not corrected for possible loss processes, have been measured for variation of NO_x between 0 and ∼1800 ppbv: DMSO decreases from 20 to 3%S; DMSO₂ increases from 3 to 15%S, SO₂ decreases from 70 to 30%S and MSA increases from 4 to 17%S. Under the experiments conditions NO_x levels of several tens of ppbv are required before a perceptible change is observed in the MSA yield. If applicable to the atmosphere such a situation is only likely to be observed near coastal areas affected by pollution. MSPN (CH₃SO₂O₂NO₂) is observed as an oxidation product in the presence of NO₂ even at low levels (e.g. 60 ppbv). Its possible role as a NO_x reservoir in the troposphere is considered.     

氯离子对氨氮电化学氧化的影响

以自制的二氧化铅粉末多孔电极为阳极,不锈钢为阴极,探讨了投加Cl-对氨氮电化学氧化反应速率、途径及产物等的影响。结果表明,投加Cl-能显著提高氨氮的电化学氧化速率;有氯离子存在的条件下,氨氮的去除主要靠电催化过程中产生的强氧化性物质.OH,HClO的作用,其去除率随着电流密度的增大呈增高的趋势,随初始pH的增大而增大;投加氯离子后,NO3--N的生成量增加,但氧化产物主要是以N2为主的含氮气体。     

Biodegradation potential of ofloxacin and its resulting transformation products during photolytic and photocatalytic treatment

The release of pharmaceuticals in the environment, as parent compounds, metabolites and transformation products, and the consequent risks posed to living organisms due to the unintended exposure of the latter to these chemicals are nowadays of increasing scientific concern. The development of advanced oxidation processes able to degrade these substances is in the core of the current research objectives, the main target being the removal of these compounds from wastewaters. Often the focus is on the removal of the parent compound only. However, these processes can form transformation products. Knowledge on the risk related to such transformation products is scarce. Among others, knowledge on their toxic effects and their biodegradability is of importance not only when they are present in the environment but also for the assessment of the advanced oxidation processes’ efficiency applied for their degradation. Photolytic (UV irradiation) and photocatalytic treatment (UV irradiation in the presence of TiO₂) of the fluoroquinolone ofloxacin were applied, and the biodegradability of the formed products was investigated using the Closed Bottle test (OECD 301 D). Various transformation products, formed both during the photo(cata)lytic treatment and the Closed Bottle test, were identified using chromatographic analysis with an ultra high-performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) system. The transformation products formed during the phototreatments were found to be non-readily biodegradable as the biodegradation percentages were close to zero. The persistence of the various photo(cata)lytic transformation products during the Closed Bottle test may be attributed to the fluorine present in all the transformation products formed. The transformation products identified suggest that two transformation routes were present: decarboxylation and opening of the piperazinyl ring. Interestingly, it was observed that in the presence of a readily biodegradable carbon source (sodium acetate), the biodegradation percentage increased drastically for some of the photolytically treated samples. This was not the case for the photocatalytically treated samples, in which also mineralization of the parent compound was achieved faster. Further research is needed, however, in order to increase the understanding of the conditions that may lead to less potent and persistent substances during the application of such engineered or natural processes.     

Estimation of the Natural Background of Ozone Present at Surface Rural Locations

The natural background in the ozone concentration at rural locations in the United States and western Europe has been estimated by use of several approaches. The approaches utilized include the following: (1) historical trends in ozone concentration measurements, (2) recent ozone measurements at remote sites, (3) use of tracers of air originating in the stratosphere or upper troposphere and (4) results from applications of tropospheric photochemical models. While each of these approaches has its own limitations it appears that the natural background of ozone during the warmer months of the year is in the range of 10 to 20 ppb. Most of the ozone originating in the lower stratosphere or upper troposphere is lost by chemical or physical removal processes as well as undergoing dilution by air in the lower troposphere before reaching ground level rural locations. Lower tropospheric photochemical processes, those below 5 km, are likely to account for most of the ozone measured at rural locations during the warmer months of the year.

A key aspect to improved quantitation of the contributions from lower tropospheric photochemical processes to ozone concentrations continues to be more extensive atmospheric measurements of the distribution of reactive species of nitrogen. The emission densities of anthropogenic sources of NO_x are known to be highly variable over populated areas of continents as well as between continental areas and the oceans. The emission densities of biogenic sources of NO_x are small, likely to be highly variable, but poorly quantitated. These wide variations indicate the need for use of three dimensional tropospheric photochemical models over large continental regions.

Available results do indicate higher efficiencies for ozone formation at lower NO_x concentrations, especially below 1 ppb.     

Distribution,Sources and Sinks of Atmospheric Halogenated Compounds

Based on two comprehensive field studies conducted in California, background concentration (parts per trillion) of N₂O (296.0 X 10³), SF₆ (0.16), CCI₂F₂ (180.8), CCI₃F (103.8), CCI₂FCCIF₂ (16.3), CCI₄ (114.2), CH₃CI (952.9), CHCI3 (23.4), CH₃I (2.4), CH3CCI3 (84.0), CCI₂CCI₂ (43.1), CHCICCI2 (14.5) and CH₃Br (—) have been reported. These trace constituents were identified using retention data on eight GC columns, their electron attachment properties, and their EC thermal response. All but CHCICCI₂ and CH₃Br were measurable 100% of the time at both sites. Cryogenic procedures for SF₆ ambient measurement were developed and successfully used. By an analysis of worldwide emissions of these trace constituents, their ambient levels, and their atmospheric lifetimes, it was possible to determine their origin (natural or anthropogenic). Our results indicate that 27% of organic chlorine contribution to the troposphere comes from fluorocarbons as opposed to a 73% contribution from the chloro-carbons. Further, the anthropogenic organic content in the troposphere was found to be about twice the natural content. Very high CHCI3 concentrations in onshore ocean waters were measured. Ambient data supporting the anthropogenic origin of CCI₄ have been presented.     

活性炭吸附和脱附-等离子体氧化净化有机废气的研究

根据滑动弧放电等离子体适于降解高浓度有机物废气的特性,结合活性炭吸附法,提出了吸附器的吸附浓缩和热脱附-等离子体氧化净化有机废气的方法。在活性炭吸附过程中,最初2 h内甲苯净化率达到100%,随着时间的增加净化率下降;在热脱附滑动弧放电等离子体净化过程中,甲苯降解效率最高为97.3%。将滑动弧放电等离子体反应器出口气相产物收集进行FT-IR检测,发现放电后有CO2、CO、H2O和NO2产生,并分析了甲苯的降解机理。     

Surface chemistry of dihydromyrcenol (2,6-dimethyl-7-octen-2-ol) with ozone on silanized glass,glass, and vinyl flooring tiles

The surface-phase reaction products of dihydromyrcenol (2,6-dimethyl-7-octen-2-ol) with ozone (O₃), air, or nitrogen (N₂) on silanized glass, glass and vinyl flooring tile were investigated using the recently published FACS (FLEC (Field and Laboratory Emission Cell) Automation and Control System). The FACS was used to deliver ozone (100 ppb), air, or N₂ to the surface at a specified flow rate (300 mL min^?1) and relative humidity (50%) after application of a 2.0% dihydromyrcenol solution in methanol. Oxidation products were detected using the derivatization agents: O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine hydrochloride (PFBHA) and N,O-bis(trimethysilyl)trifluoroacetamide (BSTFA). The positively identified reaction products were glycolaldehyde, 2,6-dimethyl-5-heptenal, and glyoxal. The proposed oxidation products based on previously published VOC/O₃ reaction mechanisms were: 2,6-dimethyl-4-heptenal, 6-methyl-7-octen-2-one and the surface-specific reaction products: 6-methyl-6-hepten-2-one, 6-methyl-5-hepten-2-one, and 6-hydroxy-6-methylheptan-2-one. Though similar products were observed in gas-phase dihydromyrcenol/O₃ reactions, the ratio, based on peak area, of the reaction products was different suggesting stabilization of larger molecular weight species by the surface. Emission profiles of these oxidation products over 72 h are also reported.