Kinetics of imidazolium-based ionic liquids degradation in aqueous solution by Fenton oxidation

In the last few years, several works dealing with Fenton oxidation of ionic liquids (ILs) have proved the capability of this technology for their degradation, achieving complete ILs removal and non-toxic effluents. Nevertheless, very little is known about the kinetics of this process, crucial for its potential application. In this work, the effect of several operating conditions, including reaction temperature (50–90 °C), catalyst load (10–50 mg L^?1 Fe³⁺), initial IL concentration (100–2000 mg L^?1), and hydrogen peroxide dose (10–200% of the stoichiometric amount for the complete IL mineralization) on 1-butyl-3-methylimidazolium chloride ([C₄mim]Cl) oxidation has been investigated. Under the optimum operating conditions (T = 90 °C; [Fe³⁺]₀ = 50 mg L^?1; [H₂O₂]₀ = 100% of the stoichiometric amount), the complete removal of [C₄mim]Cl (1000 mg L^?1) was achieved at 1.5-min reaction time. From the experimental results, a potential kinetic model capable to describe the removal of imidazolium-based ILs by Fenton oxidation has been developed. By fitting the proposed model to the experimental data, the orders of the reaction with respect to IL initial concentration, Fe³⁺ amount and H₂O₂ dose were found to be close to 1, with an apparent activation energy of 43.3 kJ mol^?1. The model resulted in a reasonable fit within the wide range of operating conditions tested in this work.     

Photooxidation of phenol in aqueous solution in the presence of hydrogen peroxide

The combination of ultraviolet light and hydrogen peroxide was demonstrated to be a useful method for removing COD and TOC in aqueous phenol solutions. Both COD and TOC decreased to nearly zero in the presence of hydrogen peroxide.     

Electrochemical oxidation of sulfite ions in aqueous solutions

Gaseous pollutants that affect human health, destroy vegetation and damage materials and art treasures can be converted into harmless components by electrochemical reactions. Electrochemical gas purification methods can be applied basically in two steps. In the first step, gases to be removed are absorbed in an aqueous electrolyte. Then, in the second step, they can be converted into harmless components via electrochemical oxidation or electrochemical reduction. This study investigated the feasibility of electrochemical removal of sulfite ions arising from the absorption of sulfur dioxide in an aqueous electrolyte. The removal efficiency, current efficiency, and energy consumption were determined at different initial sulfite ion and electrolyte concentrations and applied currents. Furthermore, linear sweep voltammetry studies were performed using a graphite electrode in sulfuric acid. It has been concluded from all these experiments that sulfur dioxide can successfully be removed using an electrochemical method.     

Photochemical degradation of 1,3-dinitrobenzene in aqueous solution in the presence of hydrogen peroxide

A study on the destruction of 1,3-dinitrobenzene (1,3-DNB) in aqueous solution was carried out under ultraviolet (UV) irradiation alone and UV irradiation in the presence of hydrogen peroxide (H2O2). The combination of UV and H2O2 is significantly effective in degrading 1,3-DNB in terms of initial reaction rate and the mineralization of organic carbons. The photodegradation process can be influenced in certain extent by increasing the content of H2O2 and the acidity of reaction matrices. It was found that a variety of phenolic intermediates and inorganic acid were formed via hydroxyl radicals attacking the parent compound. The UV/H2O2 oxidation of 1,3-DNB was characterized by pseudo-zero order reaction for the degradation of 1,3-DNB with a 20 times enhanced rate constant of 1.36 x 10(-7) Ms(-1) and the initial rate constant was dependent on the initial concentration of 1,3-DNB.     

Mineralization of Reactive Black 5 in aqueous solution by basic oxygen furnace slag in the presence of hydrogen peroxide

Basic oxygen furnace slag (BOF slag) is a solid waste arisen from the steel making process. FeO is one of the major components of BOF slag. The FeO-containing property of BOF slag makes it possible to catalyze the Fenton reaction. Reactive Black 5 (RB5) dye is chosen as the target compound in this study. This study has investigated the catalytic performance of BOF slag on the Fenton reaction to decompose RB5 in aqueous solution. A first-order kinetic model with respect to TOC was adopted to explain the mineralization of RB5 by the H(2)O(2)/BOF slag process. The experimental results in this study suggested that dosage with 1.49 x 10(-4)M min(-1) H(2)O(2) and 12.5 g l(-1) BOF slag in the solution at pH 2 provided the optimal operation conditions for the mineralization of RB5 yielding a 51.2% treatment efficiency at 100 min reaction time, and complete decoloration can be achieved within 30 min reaction time. The H(2)O(2)/Fe(2+) ratio was then determined to be 6.06:1.     

黄铁矿催化H2O2氧化降解水中三氯生

以三氯生为目标污染物,研究了黄铁矿催化H2O2非均相类Fenton体系对污染物的去除效果,并利用SEM、EDS等手段对天然黄铁矿进行了表征。考察了催化剂、H2O2投加量、溶液初始pH、反应时间等重要因素对催化氧化反应的影响。在H2O2投加量5 mg/L,黄铁矿用量0.1 g/L,溶液初始pH为8,反应10 min后,三氯生的去除率达90%以上。相对于传统Fenton反应,pH对本非均相催化反应的影响较小,在2～10的pH范围内,仍有较高的催化活性。利用GC-MS分析显示,三氯生降解过程能够产生包括2,4-二氯苯酚在内的多种中间产物。     

Coupled oxidation of aromatic hydrocarbons by horseradish peroxidase and hydrogen peroxide

The oxidation capability of horseradish peroxidase (HRP) and hydrogen peroxide (H2O2) coupled oxidation of aromatic hydrocarbons (o-xylene-d10 and naphthalene-d8) was investigated. Batch experiments were conducted using horseradish peroxidase prepared in potassium phosphate buffer in the presence of H2O2. The oxidation of aromatic hydrocarbon was tested as a function of HRP at a fixed concentration of H2O2, and as a function of the concentration of H2O2 at a constant HRP activity (4000 units/ml). The mass removal of o-xylene-d10 and naphthalene-ds increased with increasing HRP enzymatic activity, and up to 54% and 51% of mass removal were observed for o-xylene-d10 and naphthalene-d8, respectively. Increasing the concentration of H2O2 resulted in increased mass removal of aromatic hydrocarbons.     

Kinetics and mechanism of nitrite oxidation by hypochlorous acid in the aqueous phase

The rate coefficient for the reaction of nitrite with hypochlorite and hypochlorous acid has been studied using spectrophotometric measurements. The reaction rate has been determined in a wide range of H(+) concentration (5< or =-log[H(+)]< or =11). The kinetics were carried out as a function of NO(2)(-), H(+) and total hypochlorite ([HOCl](total)=[HOCl]+[ClO(-)]+[ClNO(2)]) concentrations. The observed overall rate law is described by: -d[HClO](T)dt=[a[NO(2)(-)](2)+b[NO(2)(-)]][H(+)](2)c+d[H(+)]+e[NO(2)(-)][H(+)](2)[HOCl](total)At T=298 K and in Na(2)SO(4) at an ionic strength (I=1.00 M), we obtained using a nonlinear fitting procedure: a=(1.83+/-0.36)x10(7) s(-1), b=(1.14+/-0.23)x10(5) Ms(-1), c=(1.12+/-0.17)x10(-13) M, d=(1.43+/-0.29)x10(-6) M(2) and e=(1.41+/-0.28)x10(3) M where the errors represent 2sigma. According to the overall rate law, a/b=k(1)/k(3), b/e=k(3), c=K(w), d/c=K(a), d=K(a)K(w) and e=K(1)K(a). In Na(2)SO(4) at an ionic strength (I=1.00 M), the values of K(1) and K(a) are (1.1+/-0.1)x10(-4) and 1.28x10(7) M(-1), respectively. A mechanism is proposed for the NO(2)(-) oxidation which involves the reversible initial step: NO(2)(-)+HOCl left harpoon over right harpoon ClNO(2)+OH(-) (K(1)), while ClNO(2) undergoes the two parallel reactions: attack by NO(2)(-) (k(1)) and hydrolysis (k(3)). ClNO(2) and N(2)O(4) are proposed as important intermediates as they control the mechanism. The rate coefficients k(1) and k(3) have been determined at different ionic strengths in NaCl and Na(2)SO(4). The influence of the ionic strength and ionic environment has been studied in this work.     

Kinetics of nitromusk compounds degradation in water by ultraviolet radiation and hydrogen peroxide

The photodegradation of five representative nitromusk compounds in water has been performed in a stirred batch photoreactor with a UV low-pressure immersed mercury lamp, at constant temperature and different doses of hydrogen peroxide. The rate constants have been calculated on the basis of experimental data and a postulated first-order kinetic model. The rate constants, at 298 K and a dose of 1.1746 μmol l⁻¹ H₂O₂ ranges from 0.3567 × 10⁻³ s⁻¹ for musk tibetene, to 1.785 × 10⁻³ s⁻¹ for musk ambrette.     

湿式双氧水氧化处理染料中间体H-酸钠盐溶液的研究

在0.5 L压力反应器内,对染料中间体H-酸钠盐溶液进行湿式双氧水氧化(WPO)及湿式双氧水催化氧化(CWPO)降解处理.分别考察反应时间、双氧水用量、温度、进水pH值和催化剂等对反应过程与对象污染物降解的影响规律.结果表明,WPO能在温和的条件下降解难于生物降解的有机物,在温度为110℃、压力为0.5 MPa、双氧水用量为理论需用量、进水pH=5的条件下,处理含10 g/L H-酸钠盐的H-酸盐溶液的COD和色度去除率分别为62.0%和98.7%;采用非均相Cu/Ni复合催化剂,在同样操作条件下,CWPO对同一废水的COD和色度去除率分别可达到92.0%和99.9%.表明催化剂的存在大大提高了WPO的氧化效果.     

Fenton氧化水中间氯硝基苯的动力学与机制研究

结合Fenton氧化反应动力学模型研究了Fenton氧化水中间氯硝基苯(m-ClNB)的影响因素和降解机制.结果表明:(1)反应初始pH、H2O2浓度、Fe2+浓度、污染物初始浓度和反应温度对m-ClNB的降解均有明显影响.在反应初始pH为3.5、m-ClNB初始摩尔浓度为0.444mmol/L、H2O2摩尔浓度为21.55mmol/L、Fe2+摩尔浓度为0.054mmol/L、反应温度为(25土1)℃的条件下,m-ClNB的去除效果较好.(2)建立了Fenton氧化m-ClNB的准一级反应动力学模型,且m-ClNB的降解与该模型拟合良好.基于不同反应温度时的准一级反应速率常数(kap),得到了m-ClNB降解的阿累尼乌斯公式,且活化能为36.51kJ/mol.(3)气相色谱(GC)/质谱(MS)和高效液相色谱(HPLC)/MS分析表明,Fenton氧化m-ClNB的主要产物有4-氯-2-硝基苯酚及其同分异构体、羟基乙酸、草酸、丁二酸、丙二酸、6-氯己酸、乙醛酸、2,2-二羟基丙二酸和2-乙基丙二酸等.     

过氧化氢/草酸铁体系太阳光催化降解染料废水的研究

以过氧化氢 /草酸铁络合物作光氧化剂 ,利用太阳光对 10种水溶性染料模拟废水进行了光氧化降解试验研究 ,发现在日光照射下 ,过氧化氢 /草酸铁络合物能使染料溶液迅速降解。以活性艳蓝KN R为代表 ,研究各种因素对光降解的影响。结果表明 ,溶液pH为 2 0～ 4 0时 ,光降解速率快 ;溶液中Fe3 + 与草酸根的摩尔比为 1∶3时 ,光解效果最好 ;提高H2 O2 浓度可以提高光降解速率 ,但H2 O2 的利用率会降低。     

Comparison of the degradation of p-hydroxybenzoic acid in aqueous solution by several oxidation processes

A comparative study is made of 12 methods of chemical oxidation applied to degrading p-hydroxybenzoic acid in aqueous solution. The oxidation processes tested were: UV, O3, UV/TiO2, O3/Fe2+, O3/H2O2, O3/UV, UV/H2O2, H2O2/Fe2+, H2O2/Fe2+/O3, UV/H2O2/O3, H2O2/Fe2+/UV and O3/UV/H2O2/Fe2+. The 12 processes were ranked by reactivity. In a kinetic study, the overall kinetic rate constant was split up into three components: direct oxidation by UV irradiation (photolysis), direct oxidation by ozone (ozonation), and oxidation by free radicals (mainly OH*).     

微波辅助空气氧化水溶液中的PCP

采用活性炭为催化剂，对微波辅助空气氧化水溶液中的五氯酚进行了处理研究。考察了活性炭投加量、微波功率、辐射时间和通气量对溶液中五氯酚的去除率的影响。结果表明，在通气量为0．2L／min，微波功率800W和微波辐射60min时，五氯酚的去除率可达到90％以上；对微波辐射前后的滤液进行紫外扫描和pH分析，可证实五氯酚被降解。     

微波辅助空气氧化水溶液中的PCP

采用活性炭为催化剂,对微波辅助空气氧化水溶液中的五氯酚进行了处理研究.考察了活性炭投加量、微波功率、辐射时间和通气量对溶液中五氯酚的去除率的影响.结果表明,在通气量为0.2 L/min,微波功率800 W和微波辐射60 min时,五氯酚的去除率可达到90%以上;对微波辐射前后的滤液进行紫外扫描和pH分析,可证实五氯酚被降解.