Relation Between Individual Tree Mortality and Tree Characteristics in a Polluted and Non-Polluted Environmentx

Data on individual tree mortality in relatively healthy (Berezinskiy biosphere reserve) and damaged (surroundings of the mineral fertilizer plant ‘Achema’) even-aged Scots pine (Pinus sylvestris L.) stands are presented. Tree size and competition intensity were found to be the most significant predictors of individual tree mortality in all age groups of the relatively healthy Scots pine stands, however, an essential reduction in the closeness of relations between the tree mortality rate and these variables was determined with the aging of stands. An exponential decrease in tree mortality probability with an increase of tree size is characteristic for trees suffering different competition intensity, however, this decrease becomes much more pronounced as the competition pressure increases. The relations of different tree and stand variables with tree mortality probability have been found to become much weaker in the polluted environment. An exponential increase in tree mortality probability with an increase of crown defoliation was characteristic of damaged Scots pine stands, however, the rate of the increase was different in different age and diameter classes. The impact of crown defoliation on tree mortality rate increased with the aging of stands. At the same defoliation level, individual tree mortality probability was much higher for smaller suppressed trees, however, a relative increase in tree mortality probability along with an increase of crown defoliation was more pronounced for dominant trees. Conclusion: a higher mortality of damaged (defoliated) trees should be considered while assessing losses in forest productivity in a polluted environment.     

Relation between individual tree mortality and tree characteristics in a polluted and non-polluted environment

Data on individual tree mortality in relatively healthy (Berezinskiy biosphere reserve) and damaged (surroundings of the mineral fertilizer plant 'Achema') even-aged Scots pine (Pinus sylvestris L.) stands are presented. Tree size and competition intensity were found to be the most significant predictors of individual tree mortality in all age groups of the relatively healthy Scots pine stands, however, an essential reduction in the closeness of relations between the tree mortality rate and these variables was determined with the aging of stands. An exponential decrease in tree mortality probability with an increase of tree size is characteristic for trees suffering different competition intensity, however, this decrease becomes much more pronounced as the competition pressure increases. The relations of different tree and stand variables with tree mortality probability have been found to become much weaker in the polluted environment. An exponential increase in tree mortality probability with an increase of crown defoliation was characteristic of damaged Scots pine stands, however, the rate of the increase was different in different age and diameter classes. The impact of crown defoliation on tree mortality rate increased with the aging of stands. At the same defoliation level, individual tree mortality probability was much higher for smaller suppressed trees, however, a relative increase in tree mortality probability along with an increase of crown defoliation was more pronounced for dominant trees. Conclusion: a higher mortality of damaged (defoliated) trees should be considered while assessing losses in forest productivity in a polluted environment.     

Evaluation of air pollution phytotoxicity downwind of a phosphate fertilizer factory in India

The effects of air pollution on plants downwind of a fertilizer factory at Udaipur, India, were studied using three woody perennials. Seedlings of these species including a shrub (Carissa carandas L.), a leguminous avenue tree (Cassia fistula L.) and a fruit tree (Psidium guajava L.) were grown in earthen pots at different study sites receiving varying levels of air pollution input. Changes in plant growth, morphological characteristics, photosynthetic pigment, ascorbic acid, N and S contents and in dry matter allocation were considered in relation to the status of ambient air quality. Observations with these parameters have indicated that the ambient air around the factory contained pollutants at phytotoxic levels. Plant height, basal diameter, conopy area, leaf area and chlorophyll, ascorbic acid and foliar-N concentrations decreased with increasing pollution load. However, foliar-S increased slightly at polluted sites. Air pollution load around the factory have also altered the biomass allocation. Root:shoot ratios increased in C. fistula and P. guajava at polluted sites. In contrast, for C. carandas the above ground parts, where foliage assumed predominance showed precedence over the root growth. This species responded characteristically to air pollution stress by allocating more of its photosynthate towards leaf production and shoot growth.     

Site characteristics,growth and nutrition of natural red pine stands in newfoundland

Red pine (Pinus resinosa Ait.) is rare (< 15 000 mature trees) in Newfoundland and is known from only 22 locations in the central region. Red pine occupies 3 major site types in Newfoundland: 1) red pine on medium-textured sands (RP1), 2) red pine on coarse-textured glaciofluvial deposits (RP2), and 3) red pine on Folisols over bedrock (RP3). The succession of red pine site types after cutting is from red pine to Kalmia-black spruce (Picea mariana (Mill.) B.S.P.) for RP1, and to Cladonia-Kalmia-black spruce for types RP2 and RP3. Succession after fire is usually to the pre-fire type, but this depends on the severity of the fire.Although occupying a relatively poor site, red pine at 60–70 years reaches heights in excess of 18 m, dbh in excess of 40 cm, and individual tree volumes greater than 1 m³ were recorded in 75 stemanalyzed fire-killed trees. Black spruce on that same site produces less than one-third that volume in 60 years. Merchantable volume of 140–280 m³ ha^-1 were recorded i.e., Canada Land Inventory (CLI) forest capability class 5 and class 4 ratings. This raises the CLI rating two capability classes if red pine were occupying these poor quality sites over black spruce. In terms of nutrition, even the best growing red pine are nitrogen (N) deficient as shown by foliar analysis. All natural stands have foliar N concentrations below 1.3% which is the critically low level shown in the literature. Immediately after fire, foliar concentrations reach this level but are usually about 1% or less. Most other nutrients are low but are within the generally reported adequate levels in testing for P, K, Ca and Mg.Fire influences soil nutrient availability as pH increases in the RP1 type. Burning temperature also affects soil pH and the understory vegetation. The RP2 type loses more N in hotter burns on this site type and more N is tied up in these ortstein hardpan soils. The pattern of regeneration following wildfire is related to slope, density, age and species mixture of the stand as well as the thickness and composition of the duff layer.     

Growth, aboveground biomass, and nutrient concentration of young Scots pine and lodgepole pine in oil shale post-mining landscapes in Estonia

The investigation was carried out in 8-year-old Scots pine (Pinus sylvestris L.) and lodgepole pine (Pinus contorta var. latifolia Engelm.) plantations on post-mining area, Northeast Estonia. The aim of the study was to assess the suitability of lodgepole pine for restoration of degraded lands by comparing the growth, biomass, and nutrient concentration of studied species. The height growth of trees was greater in the Scots pine stand, but the tree aboveground biomass was slightly larger in the lodgepole pine stand. The aboveground biomass allocation to the compartments did not differ significantly between species. The vertical distribution of compartments showed that 43.2% of the Scots pine needles were located in the middle layer of the crown, while 58.5% of the lodgepole pine needles were in the lowest layer of the crown. The largest share of the shoots and stem of both species was allocated to the lowest layer of the crown. For both species, the highest NPK concentrations were found in the?needles and the lowest in the stems. On the basis of the present study results, it can be concluded that the early growth of Scots pine and lodgepole pine on oil shale post-mining landscapes is similar.     

Monitoring Of Vehicles Derived Particulates Using Magnetic Properties Of Leaves

Biomonitoring of vehicle-derived particulates is conducted by taking magnetic measurements of roadside tree leaves. Remanent magnetization (IRM_{300 mT}) of more than 400 Delbergia sissoo leaves was determined and IRM_{300 mT} normalized for the leaf area. The normalized 2-D magnetization as shown by results is dominantly controlled by the tree's distance to the road. The spatial and temporal variations of vehicle-derived particulates were mapped using magnetic analysis. 2D-magnetizations values were higher for leaves collected adjacent to major road sections than for those from village road suggesting vehicle emissions, rather than resuspended road dust, as the major cause of magnetic particles of roadside tree leaves. Vehicles derived particulates are responsible for tree leaf magnetism, and the leaf magnetizations values fall significantly from high values proximal to the roadside to lower values at the distal side. This suggests the ability of trees to reduce particulates concentrations in the atmosphere. The rainfall produces a net decrease in the leaf magnetic dust loadings.     

Scots pine needles macronutrient (N, P, K, CA, MG, and S) supply at different reclaimed mine soil substrates—as an indicator of the stability of developed forest ecosystems

A main objective of restoration and afforestation at post-mining sites is establishing a long-term sustainable ecosystem which depends on adaptations of tree species and which in turn depends on the soil nutrient flux. The nutrient concentration (nitrogen (N), P, K, Ca, Mg, and sulfur (S)) of Scots pine needles was investigated in reclaimed mine soils (RMS) located at the following post-mining sites: a sand mine pit, spoil heap from a lignite mine, spoil heap from a S mine, and a carbonaceous spoil heap from an underground coal mine. The control plots were arranged on natural forest sites adjacent to the post-mining sites. A higher level of foliar nutrients was noted in the carbonaceous RMS, while lower levels were found in RMS on the spoil heap following lignite mining. The characteristics of the substrate were found to exert greater effect than mineral fertilization (performed at the onset of reclamation) on the tree stand characteristics, needle length and foliar nutrient concentration. While the soils and trees were most deficient in N, negative symptoms have not been noted to this date in tree stands at reclaimed mine sites. Trophic ratings were recommended based on statistical correlations and groupings between N and P contents in needles and needles length (mean length of 300 needles) while nutrient ratings were recommended from statistical differences and groupings of the RMS substrates.     

Overstory mortality as an indicator of forest health in California

The interagency Forest Health Monitoring Program involves a network of about 4200 forest plots on a triangular grid across the United States. We present data on recent mortality of trees 27.9 cm diameter from the first three years of measurements in California (1992–1994). Three plot designs were used to collect data representative of a 1-ha stand at each site; the designs differed primarily in total area sampled (0.067, 0.4 and 1.0 ha). Approximately 50 sites were visited each year yielding a total of about 150. Field tallies showed few cases of recent mortality in the smallest plot size. Cumulative distribution functions of recent dead tree densities in the 0.067-ha plots differed significantly from those generated by tallies from entire 1-ha stands. We conclude that an area of 0.067 ha is unsuitable to assess and monitor overstory mortality in Pacific Coast forests.The U.S. government right to retain a non-exclusive, royalty free licence in and to any copyright is acknowledged.     

Measurements of stem diameter: implications for individual- and stand-level errors

Stem diameter is one of the most common measurements made to assess the growth of woody vegetation, and the commercial and environmental benefits that it provides (e.g. wood or biomass products, carbon sequestration, landscape remediation). Yet inconsistency in its measurement is a continuing source of error in estimates of stand-scale measures such as basal area, biomass, and volume. Here we assessed errors in stem diameter measurement through repeated measurements of individual trees and shrubs of varying size and form (i.e. single- and multi-stemmed) across a range of contrasting stands, from complex mixed-species plantings to commercial single-species plantations. We compared a standard diameter tape with a Stepped Diameter Gauge (SDG) for time efficiency and measurement error. Measurement errors in diameter were slightly (but significantly) influenced by size and form of the tree or shrub, and stem height at which the measurement was made. Compared to standard tape measurement, the mean systematic error with SDG measurement was only ?0.17 cm, but varied between ?0.10 and ?0.52 cm. Similarly, random error was relatively large, with standard deviations (and percentage coefficients of variation) averaging only 0.36 cm (and 3.8%), but varying between 0.14 and 0.61 cm (and 1.9 and 7.1%). However, at the stand scale, sampling errors (i.e. how well individual trees or shrubs selected for measurement of diameter represented the true stand population in terms of the average and distribution of diameter) generally had at least a tenfold greater influence on random errors in basal area estimates than errors in diameter measurements. This supports the use of diameter measurement tools that have high efficiency, such as the SDG. Use of the SDG almost halved the time required for measurements compared to the diameter tape. Based on these findings, recommendations include the following: (i) use of a tape to maximise accuracy when developing allometric models, or when monitoring relatively small changes in permanent sample plots (e.g. National Forest Inventories), noting that care is required in irregular-shaped, large-single-stemmed individuals, and (ii) use of a SDG to maximise efficiency when using inventory methods to assess basal area, and hence biomass or wood volume, at the stand scale (i.e. in studies of impacts of management or site quality) where there are budgetary constraints, noting the importance of sufficient sample sizes to ensure that the population sampled represents the true population.     

Management of hazardous road derived respirable particulates using magnetic properties of tree leaves

The magnetic properties of tree leaves along with their ecological, economical and aesthetic importance can be used to control road derived respirable particulates. Isothermal remanent magnetization (IRM₃₀₀ mT) of three different tree leaves viz. Mango (Mangifera indica), Sisso (Dalbergia sisso) and Banyan (Ficus benghalensis) were determined and IRM₃₀₀ mT normalized for the leaf area. The normalized 2-D magnetization of leaves as shown by results is dominantly controlled by leaf morphology and traffic density. F. benghalensis (Banyan) leaf has highest 2-D magnetization and D. sisso (Sisso) leaf having least 2-D magnetization suggesting greater ability of F. benghalensis (Banyan) tree leaves to reduce magnetic particulates. The particle size of the magnetic grains falls in the category of PM2.5, a particle size hazardous to human health due to its capacity to be inhaled deeply into the lungs.     

Trace Element Concentrations and Bioindicator Responses in Tree Swallows from Northwestern Minnesota

Extremely high concentrations of cadmium (3.5 μg/g dry wgt.) and elevated concentrations of chromium (>10 μg/g dry wgt.) and mercury (1.6 μg/g dry wgt.) were reported in waterbird tissues at Agassiz National Wildlife Refuge in northwestern Minnesota in 1994. Tree swallows (Tachycineta bicolor) were studied during 1998–2001 at three drainages into the Refuge, two pools on the Refuge, and at a nearby reference location to document whether high levels of contaminants were still present, and if so to quantify the source and severity of the contamination. Trace elements were measured in tree swallow eggs, livers, and diet. Reproductive success and bioindicator responses were monitored. In 2000, water was drawn down on Agassiz Pool, one of the main pools on the Refuge. This presented an opportunity to evaluate the response of trace element concentrations in the diet and tissues of tree swallows after reflooding. High concentrations of trace elements were not detected in swallow tissues, nor were there differences among locations. Less than 20% of swallow samples had detectable concentrations of cadmium or chromium. Mercury concentrations were low and averaged <0.25 μg/g dry wgt. in swallow tissues. Trace elements, including mercury, did not increase in tree swallows following the 2000 drawdown at Agassiz Pool. Hatching success and survival of nestlings to 12 days-of-age for tree swallows on the Refuge were similar to the national average and consistent with background trace element concentrations. Bioindicator measurements were within the normal ranges as well.     

Spatial modeling of forest stand susceptibility to logging operations

The susceptibility of residual, non-harvested, live trees to damage caused by the harvesting of other nearby trees has received moderate attention over the last four decades through observational studies prompted by concerns over ecological and economic consequences of logging operations. We developed models to predict the potential level of damage to residual trees that could be caused by selective timber harvesting. Three machine-learning methods, i.e., classification and regression tree (CART), random forest (RF), and boosted regression tree (BRT), were assessed for this purpose. Through an observational study of a harvested area in the Hyrcanian forests of Iran, we recorded damage to trees >7.5 cm diameter at breast height along transects and grouped them into three types: (1) scars >100 cm², (2) >50% crown removal, and (3) trees leaning >10°. These field observations were associated with the spatially explicit characteristics of the forest stand, i.e., slope angle, slope aspect, altitude, slope length, topographic position index, stand type, stand density, and distance from the nearest roads and skid trails, that were considered as the explanatory variables to the modeling processes. To determine whether the CART, RF, and BRT models performed well in estimating the probability of damage occurrence, they were validated using the Akaike information criterion (AIC) and area under the receiver operating characteristics (AUC) curve. The results revealed that the BRT model with AIC = −276 and AUC = 0.89 generated the most accurate spatially explicit distribution map of stand susceptibility to damage from logging operations, followed by RF (AIC = −263 and AUC = 0.87) and CART (AIC = −23 and AUC = 0.62). We found that the spatial extent of residual stand damage was highly influenced by slope terrain and stand density. Our study has practical implications for reorganizing and planning reduced-impact logging operations and provides forest engineers with insights into the utility of machine learning methods in domains of forestry and forest engineering.     

Measuring forest structure along productivity gradients in the Canadian boreal with small-footprint Lidar

The structure and productivity of boreal forests are key components of the global carbon cycle and impact the resources and habitats available for species. With this research, we characterized the relationship between measurements of forest structure and satellite-derived estimates of gross primary production (GPP) over the Canadian boreal. We acquired stand level indicators of canopy cover, canopy height, and structural complexity from nearly 25,000 km of small-footprint discrete return Light Detection and Ranging (Lidar) data and compared these attributes to GPP estimates derived from the MODerate resolution Imaging Spectroradiometer (MODIS). While limited in our capacity to control for stand age, we removed recently disturbed and managed forests using information on fire history, roads, and anthropogenic change. We found that MODIS GPP was strongly linked to Lidar-derived canopy cover (r?=?0.74, p?<?0.01), however was only weakly related to Lidar-derived canopy height and structural complexity as these attributes are largely a function of stand age. A relationship was apparent between MODIS GPP and the maximum sampled heights derived from Lidar as growth rates and resource availability likely limit tree height in the prolonged absence of disturbance. The most structurally complex stands, as measured by the coefficient of variation of Lidar return heights, occurred where MODIS GPP was highest as productive boreal stands are expected to contain a wider range of tree heights and transition to uneven-aged structures faster than less productive stands. While MODIS GPP related near-linearly to Lidar-derived canopy cover, the weaker relationships to Lidar-derived canopy height and structural complexity highlight the importance of stand age in determining the structure of boreal forests. We conclude that an improved quantification of how both productivity and disturbance shape stand structure is needed to better understand the current state of boreal forests in Canada and how these forests are changing in response to changing climate and disturbance regimes.     

An integrated methodology for estimation of forest fire-loss using geospatial information

These days, wildfires are prevalent in almost all areas of the world. Researchers have been actively analyzing wildfire damage using a variety of satellite images and geospatial datasets. This paper presents a method for detailed estimation of wildfire losses using various geospatial datasets and an actual case of wildfire at Kang-Won-Do, Republic of Korea in 2005. A set of infrared (IR) aerial images acquired after the wildfire were used to visually delineate the damaged regions, and information on forest type, diameter class, age class, and canopy density within the damaged regions was retrieved from GIS layers of the Korean national forest inventory. Approximate tree heights were computed from airborne LIDAR and verified by ground LIDAR datasets. The corresponding stand volumes were computed using tree volume equations (TVE). The proposed algorithm can efficiently estimate fire loss using the geospatial information; in the present case, the total fire loss was estimated as $5.9 million, which is a more accurate estimate than $4.5 million based on conventional approach. The proposed method can be claimed as a powerful alternative for estimating damage caused by wildfires, because the aerial image interpretation can delineate and analyze damaged regions in a comprehensive and consistent manner; moreover, LIDAR datasets and national forest inventory data can significantly reduce field work.     

Accuracy assessment of a small-area method for estimating the spatial distribution of the degree of tree damage

Tree damage, gauged by the amount of defoliation, is one of the basic criteria used to determine treatments for protected and economic forests. Monitoring should include an assessment of the degree of tree damage in different spatial scales. Therefore, in addition to the commonly applied large-area methods, small-area methods should be used. The aim of the paper is to present the results of the accuracy assessment of a small-area method, proposed by Podlaski (2005) [Podlaski, R. (2005). Inventory of the degree of tree defoliation in small areas. Forest Ecology and Management, 215, 361–377], for monitoring the degree of tree damage. The degree of tree damage was shown in sub-blocks P₃ of the system of information on natural environment (SINUS). To estimate the spatial distribution of the degree of tree defoliation, survey sampling, based on simple random sampling with replacement (SRSWR), was used. The degree of damage to fir (Abies alba Mill.) and beech (Fagus sylvatica L.) was analysed in the Święty Krzyż forest section in the Świętokrzyski National Park. The maximum total estimation errors for the proportion of trees with a degree zero of damage, and with second and third degrees of damage together (for α = 0.05) were at most 30.8% for fir and 24.3% for beech trees. For standard, small-area evaluations, these are satisfactory values. In the Święty Krzyż forest section, the number of P₃ sub-blocks with 0.00–5.00% of undamaged trees and with 80.01–100.00% of moderately- or severely-damaged trees was significantly greater for fir than for beech. These results indicate that the fir population was unhealthier than the beech group in the study area. P₃ sub-blocks of the SINUS system, in which the proportion of the healthiest trees was highest, were situated at the forest margin, bordering on meadows and arable fields (in the case of fir) and forming dense patches consisting of several sub-blocks, or occurring singly in the whole study area (in the case of beech). The results show the significant differentiation of forest tree health in small areas.     

Contribution to biomonitoring of some trace metals by deciduous tree leaves in urban areas

Leaves of the deciduous tree species, horse chestnut (Aesculus hippocastanum L.) and Turkish hazel (Corylus colurna L.) were used as accumulative biomonitors of trace metal pollution in the urban area of Belgrade. Using differential pulse anodic stripping voltametry, trace metal concentrations (Pb, Cu, Zn, Cd) were determined at the single leaf level (ten leaves per species, per month), during two successive years with markedly different atmospheric level of trace metals. Increased trace metal concentrations in the leaves of A. hippocastanum reflected elevated atmospheric trace metal pollution, whereas C. colurna L. did not respond accordingly. The contents of Pb and Zn in soil over the same period also followed this trend. Anatomical analyses, in young as well as in old leaves of both species, indicated typical foliar injuries of plants exposed to stressful air conditions. Water relations that correspond to leaf age may have contributed to the considerable trace metal accumulation in leaves.     

Tree-ring analysis for the assessment of anthropogenic changes and trends

Investigation of Pine (Pinus sylvestris L.)annual radial increment (width of annual tree rings) was carriedout in the surroundings of one of the largest pollution sources inLithuania – Jonava Nitrogen Fertilizers Plant. The main objectiveof investigation was to analyse different sides of anthropogenictransformations of tree-ring series in the polluted environment:changes in tree growth intensity; variance changes in tree-ringseries; changes in the relations with natural external factors.Three different periods of tree reaction to the environmentalpollution were singled out – fertilization period, depressionperiod and recovery period since annual emissions were essentiallyreduced. The variance of tree-ring series has increased severaltimes in the polluted environment. Reaction of trees to the impactof climatic factors (temperature, precipitation) has changedsignificantly in the polluted environment and their sensitivity hasalso increased.     

Long Term Fire Scar Monitoring with Remote Sensing in Northern Namibia: Relations Between Fire Frequency, Rainfall, Land Cover, Fire Management and Trees

A cost-effective method was developed to map fire scars on Quicklooks of Landat TM imagery. The method was compared with a full resolution Landsat image using visual interpretation and supervised classification using the Maximum Likelihood procedure, resulting in a high degree of agreement between methods. A long time series of fire scars was developed using all available Landsat Quicklooks between 1989 and 2001 for an area of 63000 sq km in north-east Namibia. Between 27 and 51% of the study area burned annually, while only 10% of the area did not burn between 1989 and 2001. Not-burned areas were mainly settled areas and permanent wetlands. 33% of the area burned between 5 and 7 times during the 13 years indicating a high frequency overall. Rainfall and livestock had little influence on burned areas. In 1996 formal fire management started in a portion of the study area consisting of building firebreaks and holding awareness programs. A comparison of burned areas before and after the intervention started allowed evaluating its effectiveness. The area where the formal fire management program was undertaken showed a significant decrease in burned area. It is suggested that awareness campaigns rather than firebreaks contributed to this decrease. Selected tree population data were compared with fire frequencies. Differences in tree occurrence, regeneration, and stem diameter distributions between low and high fire frequencies could be detected and explained with known responses of the species to fire. This suggests that the observed time series is representative of a long-term fire regime in the area.