Co-composting of acid waste bentonites and their effects on soil properties and crop biomass

Acid waste bentonite is a byproduct from vegetable oil bleaching that is acidic (pH < 3.0) and hydrophobic. These materials are currently disposed of in landfills and could potentially have a negative impact on the effective function of microbes that are intolerant of acidic conditions. A study was undertaken using three different sources of acid waste bentonites, namely soybean oil bentonite (SB), palm oil bentonite (PB), and rice bran oil bentonite (RB). These materials were co-composted with rice husk, rice husk ash, and chicken litter to eliminate their acid reactivity and hydrophobic nature. The organic carbon (OC) content, pH, exchangeable cations, and cation exchange capacity (CEC) of the acid-activated bentonites increased significantly after the co-composting phase. In addition, the hydrophobic nature of these materials as measured using the water drop penetration time (WDPT) decreased from >10 800 s to 16 to 80 s after composting. Furthermore, these composted materials showed positive impacts on soil physical attributes including specific surface area, bulk density, and available water content for crop growth. Highly significant increases in maize biomass (Zea mays L.) production over two consecutive cropping cycles was observed in treatments receiving co-composted bentonite. The study clearly demonstrates the potential for converting an environmentally hazardous material into a high-quality soil conditioner using readily available agricultural byproducts. It is envisaged that the application of these composted acid waste bentonites to degraded soils will increase productivity and on-farm income, thus contributing toward food security and poverty alleviation.     

Use of modified hydroxy-aluminum bentonites for chromium(III) removal from solutions

The retention of chromium(III) from a 2000ppm chromium basic sulfate and tannery waste solution at pH 4.5 using modified hydroxy-aluminum bentonites (OH-Al bentonites) as adsorbents was studied. OH-Al bentonite was prepared by mixing clay with a hydrolyzed commercial chlorohydroxy Al solution. The modified Al bentonites were obtained by (a) a treatment with 0.5M sodium chloride and (b) a treatment with a Na-hexametaphosphate solution (HMP) after adding sodium chloride. The effect of heating the adsorbents at 100, 500, 700 and 800 degrees C on Cr retention as a function of time was also analyzed. Cr retention by modified OH-Al bentonite with HMP increased with time (up to 100mgCr/g) where modified OH-Al bentonite was twice that of untreated bentonite. The relatively high uptake of metal from the salt solution by modified OH-Al bentonite treated at 800 degrees C, in which a complete interlayer collapse occurred, indicated the importance of the contribution of external surface sites to the retention capacity. The maximum Cr uptake from a water waste was 24mg/g, due to interferences and different chromium species in the industrial solution.     

高压实新疆阿尔泰膨润土微观结构随吸力变化特征

采用压汞法(MIP)和扫描电镜(SEM)法,在自由和侧限状态下,试验研究了高压实新疆阿尔泰膨润土在不同吸力条件下的微观结构变化特征。吸力的控制采用了气相法和渗析(液相)法。研究结果表明:(1)低吸力范围内,自由膨胀和侧限条件下的高压实膨润土土水特征存在明显差异;(2)膨润土在自由和侧限状态下的水化过程中呈现出了截然不同的微结构变化特征。自由膨胀条件下,土的吸水膨胀量主要来自土中大孔隙的逐渐膨胀。侧限状态下,随着控制吸力的降低,膨润土的大孔隙逐渐被压缩,较小孔隙的数量不断增加,土中孔隙分布变得更加均匀。     

国内外近地表处置场处置技术研究

近年来低、中水平放射性废物由于其数量大,种类多等特点得到了国际上越来越多的关注。近地表处置是这类放射性废物的主要处置技术。本文介绍了国外几个国家的近地表处置场运行情况以及管理经验。陈述了我国西北和北龙两个处置场设计及运行情况,对国内外低中放处置场的处置技术进行比较,借鉴国外近地表处置场的先进经验,提出我国近地表处置场建设的相关建议,为我国新建近地表处置场建设提供参考。     

Investigation and proposal for reuse of effluents from beneficiated bentonite products

This work is intended to show the characterization of three effluents (X, Y, and Z) derived from laboratory analyses conducted in the quality control department of a beneficiated bentonite products factory in order to present alternatives for their treatment and final disposal according to Brazil's National Solid Waste Policy (Política Nacional de Resíduos Sólidos – PNRS, Law 12,305/2010, Brazil). Analyses to identify the characteristics of the effluents revealed that the pH, salinity, electroconductivity, and total dissolved solids were in agreement with the organic and mineral nature of the effluent constituents: solvent, clay minerals, water, and activating agent. To assess reuse proposals, the effluents were subjected to the following tests: (a) swelling characteristic with effluent X, (b) petrochemical characterization of Y, and (c) swelling characteristic using commercial solvent and activated clay produced with effluent Z. Preliminary results indicate that each of these effluents can be reused variously in the laboratory, as a fuel, or in the original analysis/process.     

Scientific certainty and the laws that govern location of a potential high-level nuclear waste repository

Recent studies have questioned the ability of the Department of Energy to successfully construct and operate a high-level nuclear waste repository at Yucca Mountain, Nevada, USA, consistent with current Environmental Protection Agency standards and Nuclear Regulatory Commission regulations. Questions focus on whether demonstration of compliance with the agency's standards is based too much on numerical calculations and analyses that the Department of Energy must conduct to project the long-term performance of the repository. Unless these questions are resolved, the licensing of the repository could be withheld or delayed by litigation. This article reviews the extent to which laws that govern the siting of high-level nuclear waste repositories require scientific certainty in any findings about the environmental consequences of locating a repository.     

石油钻杆刷镀铜废水处理

油田钻杆刷镀铜废水的铜离子严重超标，为解决这一问题，应用硫化钠（Na2S·9H2O）化学沉淀法处理工艺及设备处理废水。经监测，处理后的废水符合国家排放标准，具有处理设施一次性投资少，操作方便，处理效果好，处理成本适当等优点。硫化钠化学沉淀法处理刷镀铜废水达到了国家排放标准。     

Tourism impacts of Three Mile Island and other adverse events: Implications for Lincoln County and other rural counties bisected by radioactive wastes intended for Yucca Mountain

Whether the proposed Yucca Mountain nuclear waste repository system will adversely impact tourism in southern Nevada is an open question of particular importance to visitor-oriented rural counties bisected by planned waste transportatin corridors (highway or rail). As part of one such county's repository impact assessment program, tourism implications of Three Mile Island (TMI) and other major hazard events have beem revisited to inform ongoing county-wide socioeconomic assessments and contingency planning efforts. This paper summarizes key research implications of such research as applied to Lincoln County, Nevada. Implications for other rural counties are discussed in light of the research findings.     

BENEFITS FROM WATER CONSERVATION DEPEND ON COMPREHENSIVE PLANNING1

: Substantial reductions in municipal water use are feasible without reducing the quality of life. If conservation measures are preplanned, properly engineered, and coordinated, reductions in utility bills for water, waste water, and energy are estimated at $30+per person per year. Installation of devices to reduce water use, engineering plans to prevent malfunctioning of collecting sewers, and engineered process modifications of treatment facilities must be coordinated to achieve full benefits of water conservation. Pollutant discharges to the aquatic environment are reduced in direct proportion to the reduction in water use.     

Siting America's geologic repository for high-level Nuclear Waste: Implications for environmental Policy

Siting a geologic repository for isolating highlevel nuclear waste up to 10,000 years is a controversial undertaking never before attempted in the United States. The Nuclear Waste Policy Act of 1982 exempted repository siting from important requirements for environmental review under the National Environmental Policy Act. In December 1987, the Nuclear Waste Policy Amendments Act identified Yucca Mountain as the first site to be characterized for a high-level nuclear waste repository. In light of the unproven nature of the technology being evaluated, the scientific uncertainties associated with Yucca Mountain, and the lack of proven methods for risk evaluation, the environmental policies for repository siting represent a significant departure from more traditional, comprehensive, and interdisciplinary environmental review for siting nuclear projects. The policies warrant further study by those interested in how present as well as future decisions about complex technologies may be made.     

A procedure to design a Permeable Adsorptive Barrier (PAB) for contaminated groundwater remediation

A procedure to optimize the design of a Permeable Adsorptive Barrier (PAB) for the remediation of a contaminated aquifer is presented in this paper. A computer code, including different routines that describe the groundwater contaminant transport and the pollutant capture by adsorption in unsteady conditions over the barrier solid surface, has been developed. The complete characterization of the chemical–physical interactions between adsorbing solids and the contaminated water, required by the computer code, has been obtained by experimental measurements. A case study in which the procedure developed has been applied to a tetrachloroethylene (PCE)-contaminated aquifer near a solid waste landfill, in the district of Napoli (Italy), is also presented and the main dimensions of the barrier (length and width) have been evaluated. Model results show that PAB is effective for the remediation of a PCE-contaminated aquifer, since the concentration of PCE flowing out of the barrier is everywhere always lower than the concentration limit provided for in the Italian regulations on groundwater quality.     

Implications of environmental program planning for siting a nuclear waste repository at Yucca Mountain,Nevada, USA

The US Department of Energy (DOE) plans to conduct site characterization studies at Yucca Mountain, Nevada, to determine if the location is a suitable site for a nuclear waste repository. In lieu of traditional environmental review in accordance with the National Environmental Policy Act of 1969, the DOE is relying on an environmental assessment (EA) mandated by the Nuclear Waste Policy Act of 1982 as the cornerstone of its environmental program for the Yucca Mountain Project. Because of statutory restrictions, the EA is not based on comprehensive baseline information. Neither does it address fundamentals of environmental analysis such as ecological integrity and assessment of cumulative impacts. Consequently, the present environmental program for Yucca Mountain reflects decisions made without complete information and integrated environmental review. The shortcomings of the program risk compromising the natural integrity of Yucca Mountain and invalidating future assessment of the ability of a nuclear waste repository located at the site to protect the environment. Significant improvements are needed in the repository siting program before it can serve as a model of how society can evaluate the long-term environmental consequences of advanced technologies, as has been suggested.     

Hydrologic behavior of two engineered barriers following extreme wetting

Many engineered barriers are expected to function for hundreds of years or longer. Over the course of time, it is likely that some barriers will experience infiltration to the point of breakthrough. This study compares the recovery from breakthrough of two storage-evapotranspiration type engineered barriers. Replicates of test plots comprising thick soil and capillary-biobarrier covers were wetted to breakthrough in 1997. Test plots were kept cleared of vegetation to maximize hydrologic stress during recovery. Following cessation of drainage resulting from the wetting irrigations, water storage levels in all plots were at elevated levels compared with pre-irrigation levels. As a result, infiltration of melting snow during the subsequent spring overloaded the storage capacity and produced drainage in all plots. Relatively rapid melting of accumulated snowfall produced the most significant infiltration events each year during the study. Capillary barriers yielded less total drainage than thick soil barriers. By limiting drainage, capillary barriers increased water storage in the upper portions of the test plots, which led to increased evaporation from the capillary barrier plots compared with thick soil plots. Increased evaporation in the capillary barrier plots allowed more water to infiltrate in the second season following the wetting tests without triggering drainage. All thick soil plots again yielded drainage in the second season. Within two years of intentionally induced breakthrough, evaporation alone (without transpiration) restored the capability of the capillary barrier covers to function as intended, although water storage in these covers remained at elevated levels.     

关于炼化企业水资源利用的几点思考

通过对我国水资源状况及石化行业水消耗情况分析,找出我国石化企业新鲜水用量,污水排放在绝对量,吨原油、万元产值的单耗,单排等方面与国外相比较存在的差距。指出存在的主要问题是:清污分流不彻底;污污分流不健全;汽提后的净化水回用量小;新鲜水冲洗地面及作为机泵冷却水直排,导致新鲜水的浪费。同时针对以上问题提出相应的建议参考指标及对应措施。     

Responses of red-osier dogwood to oil sands tailings treated with gypsum or alum

The application of composite or consolidated tailings (CT) technology provides Alberta's oil sands industry with a means of reducing the volume of the fines fraction in extraction tailings and allows for faster reclamation and revegetation of mining sites. This study examined the effects of coagulant aids (gypsum and alum), used in the production of CT, on the ion content, growth, and survival of greenhouse-grown red-osier dogwood (Cornus sericea L. subsp. sericea). Seedlings were planted in gypsum-CT and alum-CT substrates, and compared with those planted in reclamation material (salvaged peat and till). The seedlings were bottom-watered with one of the following: (i) Hoagland mineral solution prepared in deionized water (Epstein, 1972); (ii) Hoagland solution in gypsum-based CT release water; or (iii) Hoagland solution in alum-based CT release water. Pore water of CT substrates and CT release waters had similar chemical characteristics, including salinity levels. However, plants in CT substrates had higher concentrations of ions (particularly Na and B), reduced growth, and higher mortality than plants in reclamation material and treated with CT waters. The presence of H2S indicated low-oxygen conditions in the CT substrates, while in the reclamation materials with CT release water treatments, no evidence of sulfides was observed. Low-oxygen conditions in the CT substrate treatments may have interfered with plant exclusion mechanisms for Na and B. Therefore, substrate properties may modify responses of reclamation plants to pore water chemistry due to the effects on oxygen availability to roots.     

WATER QUALITY ANALYSIS OF THE HALIFAX RIVER,FLORIDA1

ABSTRACT: An application of the receiving water block of the EPA Storm Water management Model (SWMM) is presented to quantify water quality impacts and evaluated control alternatives for a 208 areawide waste water management plan in Volusia Country, Florida. The water quality impact analyses were conducted for dry-and wet-weather conditions to simulate dissolved oxygen (DO), chlorides, total nitrogen (TN), and total phosphorus (TP) in the Halifax Rivers, Florida, a 40-kilometer-long tidal estuary located on the Atlantic coast of Florida near Daytona Beach. Dry-weather analysis was performed using conventional 7-day, 10-year low flow conditions to determine a set of unit transfer coefficients which estimate the pollutant concentration transferred to any point in the estuary from a constant unit discharge of pollutants at the existing waste water treatment plant outfall locations. Wet-weather analysis was performed by continuous simulation of a typical three-month summer wet season in Florida. Three-month cumulative duration curves of DO, TN and TP concentrations were constructed to estimate the relative value of controlling urban runoff of waste water treatment plant effluent on the Halifax River. The three-month continuous simulation indicated that the greatest change in DO, TN, and TP duration curves is possible by abatement of waste water treatment plant pollution.     

优选法及正交试验在选择废水处理最佳条件中的应用

从试验考核指标出发，运用“水质指数（ＷＱＩ）”，分析影响废水处理效果的诸因素，选取ｐＨ值和处理剂加入量为可控因素，利用优选法找出钻井废水处理的最佳条件；选取两个因素水平进行正交试验，选用Ｌ４（２３）正交表，合理安排试验，确定最优因素水平组合。总之，应用优选法及正文试验于钻井废水处理工作中，获得了处理的最佳条件，对钻井生产中废水处理统一操作，降低消耗，保证废水处理达标率起着很重要的作用。     

Use of strategic environmental assessment in the site selection process for a radioactive waste disposal facility in Slovenia

The benefits of strategic environmental considerations in the process of siting a repository for low- and intermediate-level radioactive waste (LILW) are presented. The benefits have been explored by analyzing differences between the two site selection processes. One is a so-called official site selection process, which is implemented by the Agency for radwaste management (ARAO); the other is an optimization process suggested by experts working in the area of environmental impact assessment (EIA) and land-use (spatial) planning. The criteria on which the comparison of the results of the two site selection processes has been based are spatial organization, environmental impact, safety in terms of potential exposure of the population to radioactivity released from the repository, and feasibility of the repository from the technical, financial/economic and social point of view (the latter relates to consent by the local community for siting the repository). The site selection processes have been compared with the support of the decision expert system named DEX. The results of the comparison indicate that the sites selected by ARAO meet fewer suitability criteria than those identified by applying strategic environmental considerations in the framework of the optimization process. This result stands when taking into account spatial, environmental, safety and technical feasibility points of view. Acceptability of a site by a local community could not have been tested, since the formal site selection process has not yet been concluded; this remains as an uncertain and open point of the comparison.     

Managing the potential public health risks from bioaerosol liberation at commercial composting sites in the UK: An analysis of the evidence base

The diversion of biodegradable waste from landfill is of key importance in developing a sustainable waste strategy for the next decade and beyond. The proliferation of waste treatment technologies such as Mechanical Biological Treatment, Anaerobic Digestion and Composting will be paramount in achieving this strategic goal. This paper evaluates the scientific information needed to undertake an effective assessment of the potential public health risks from exposure to bioaerosols in the vicinity of commercial composting activities. Knowledge gaps currently exist in the scientific and regulatory community that limit our ability to effectively characterise source-term emissions, develop reliable dose–response data and accurately model the dispersion of bioaerosols. Consequently reliable risk estimates cannot be developed to inform the management of these potential risks. This uncertainty may prove a barrier to progress in achieving waste diversion and composting targets in Wales and the rest of the UK. A robust and extensive evidence base is required to inform the risk assessment process. This paper advocates the need for further, more focussed research into hazard characterisation of viable and non-viable organisms, improved dose–response data, exposure assessment techniques and an evaluation of the existing risk control and mitigation measures currently adopted. It is hoped that his will enable effective, timely and proportional risk management and mitigation measures to be developed that will foster the confidence required in composting technologies to achieve waste diversion targets and develop sustainable waste strategies.     

A numerical study of soil cover performance

In the investigation of soil cover design options for final decommissioning of reactive mine waste, it is often necessary to analyze or predict the anticipated cover performance as a function of the cost of implementation, which is governed by the type, number and thickness of the layers in the cover system. An example of such investigation is presented in this study where one-dimensional evaporation from hypothetical moisture-retaining cover systems is simulated to assess the influence of several cover properties and hydrogeologic parameters on performance. The commercially available transient flow model, SoilCover, was used to compute suction and water content profiles for different cover design scenarios. The predicted water content profile and porosity of layers were then used to estimate the oxygen diffusion coefficients of the various layers. The oxygen diffusion coefficients were used to estimate oxygen flux through the cover systems. The oxygen flux was, in turn, related to the maximum acid flux. The studied cover and hydrogeologic parameters included soil type, thickness of barriers, and water table elevation. Two types of infiltration and oxygen barrier and two types of capillary layer with different thicknesses were studied. The water table was either kept constant at the base of the waste (tailings) or dropped by 0.5, 1, 2, and 3m over 120 days. The results showed that the relationship between water table depression and the thickness of capillary layers, on one hand, and desaturation of the infiltration and oxygen barrier, on the other, is not linear. Relationships between oxygen flux and barrier thickness and between cost increase and performance improvement of the studied cover systems are presented. Finally, a method that outlines steps for site-specific and economically feasible design of multi-layer cover systems is introduced.