首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
以600MW机组喷淋塔为研究对象,利用Fluent软件,对装有一定开孔率气流分布板的脱硫喷淋塔进行了空塔和喷淋状态下热态流场数值模拟。计算中选用k—ε模型作为计算模型,并结合拉格朗日颗粒轨道模型,用SIMPLE算法计算。结果表明气流分布板对塔内流场、温度场和压力场都有一定的影响;引入喷淋液后,由于喷淋液滴对塔内流场强烈的整流作用,内部速度明显趋于均匀化。  相似文献   

2.
为了达到燃煤电厂超低排放的要求,运用CFD技术对装有3种不同孔隙率与不同湍流单元直径的湍流器的脱硫塔内热态流场进行数值模拟,分析速度、温度和压力分布随孔隙率和湍流单元直径的变化规律,揭示湍流器的作用机理。气、液两相分别选用RNG k-ε湍流模型和拉格朗日颗粒轨道模型,并结合SIMPLE算法进行数值模拟。模拟结果表明:安装湍流器可明显改善脱硫塔内烟气流场的均匀性,使横截面的速度标准方差减小到1.0以下,并有效延长浆液驻留时间,提高吸收区的气液接触概率及浆液利用率;在综合考虑流场分布、气液掺混程度与能量损失的情况下,安装孔隙率为50%、湍流单元直径为1.2 m的湍流器效果最佳。研究结果可为大型电厂脱硫塔中湍流器的优化及选用提供依据。  相似文献   

3.
研究对象为2种新型湿法除尘除有害气体的斜板塔:矩形斜板塔和伞罩形斜板塔.为了观察塔内流场分布规律,运用CFD(计算流体力学)软件,气相采用标准K-ε湍流模型描述,液相采用颗粒轨道模型描述,对2种新型塔内气液两相流动进行了数值模拟.预测了无喷淋和有喷淋两种情况下的气相湍流流场,不同空塔气速不同液气比的塔内压力损失.结果表明:采用中心出口的圆柱型塔可以有效地避免气体"死区"的产生;新型斜板塔能有效地增大气液接触面积,延长气体的塔内停留时间;加入喷淋液体以后,气相流场明显均匀化.该模拟也为塔体的进一步优化设计提供了依据.  相似文献   

4.
伞罩型除尘脱硫塔内除雾器性能研究   总被引:1,自引:0,他引:1  
除雾器是湿法烟气脱硫(WFGD)系统内重要的设备之一,其性能对WFGD系统运行的可靠性有重要影响.利用Fluent6.2软件对新型伞罩型除尘脱硫塔内的三维两相流场进行数值模拟,气相采用RNG湍流模型,液相采用离散相模型,选择SIMPLE算法进行计算,分析塔内的折板除雾器和旋流板除雾器的速度场、压力场和液滴的分布情况.结果表明,烟气经过折板除雾器,产生了明显的压降,且在拐角区域湍流耗散强烈,是实现气液分离的关键区域;烟气经过旋流板除雾器,速度和压强分布具有良好的对称性,液滴被气流旋转抛向壁面实现气液分离.模拟结果对新型的WFGD除雾器的设计和运行具有一定的理论指导意义.  相似文献   

5.
伞罩型湿式脱硫除尘塔入口结构优化模拟   总被引:1,自引:1,他引:0  
利用商用CFD软件Fluent,采用k-ε湍流模型和SIMPLE算法,对新型伞罩型湿式脱硫除尘塔内的三维两相流场进行数值模拟,发现了塔内烟气入口处流场所存在的不均匀性。为将其流场调节均匀从而提高脱硫除尘效率,在数值模拟的基础上提出在入口处加装直导流板、阶梯导流板和弯曲导流板,并分析塔内y=0截面速度的分布,以及z=0.21 m截面上的颗粒浓度、速度和压力等参数的分布。结果表明:通过加装阶梯导流板和弯曲导流板均可以将流场调节均匀,达到较理想状态,从而实现高效净化气体的目的。模拟结果对设备的优化设计和实际运行有一定的指导作用。  相似文献   

6.
为直观地了解和分析脱硫筒内部气液两相的混合与流动规律,采用CFD仿真软件对某公司大型湿法脱硫塔内气动乳化脱硫筒内气液流动进行数值模拟,分析了加装湍流器、改变湍流器角度以及喷雾锥角对脱硫筒内气液两相流动混合的影响;选用可实现的k-ε湍流模型和DPM模型,结合SIMPLE算法对气、液两相进行数值模拟.模拟结果显示,增设湍流...  相似文献   

7.
基于颗粒动力学理论,利用Fluent软件中的气体-颗粒两相流体模型,对新型一体化脱硫工艺(NID)反应器中不同工况下的三维流场进行数值模拟,并结合工厂实测数据及文献数据对模拟结果进行验证。结果表明,Fluent软件的模拟数据与工厂实测数据及文献数据相吻合,利用Fluent软件模拟了NID反应器内颗粒速度和浓度的分布,分析了反应器内流场的形成机制以及烟气进速和颗粒粒径对塔内压降的影响。由模拟结果可知,在烟气进速为18m/s、颗粒粒径为0.5~50.0μm时,颗粒浓度分布均匀,塔内回流区最小,压强变化稳定,最有利于提高实际工业运行的稳定性与安全性。  相似文献   

8.
利用FLUENT软件和SIMPLE算法对新型旋流脱硫塔的气液两相流场进行了数值模拟。计算中气相采用了RSM湍流模型,颗粒相采用了Lagrange坐标系下的随机轨道模型。分析结果表明,气相流场具有强旋流特性;喷射液滴的直径、喷淋量和烟气流速影响其在塔内的分布:喷射液滴粒径越大、喷射量越小、烟气流速越大,入口段降温越少;塔体上方截面平均浓度随液滴粒径的增加而降低,随液气比的增加而增加,随烟气流速的增加会先增加至最高值然后降低。喷淋液滴在其他运行参数不变时,平均粒径范围为0.5~1 mm,会对进口烟气起到较好的净化与降温的作用,并使塔体上方喷淋液滴在截面z=4.15 m处浓度分布均匀且覆盖率高;在保证液滴粒径较小时,通过降低烟气流速或增加喷淋量可提高液滴喷淋覆盖率,使得烟气与喷淋充分接触。计算得到的气相流场分布与实测值吻合较好,证明了数学模型的合理性,为进一步优化分离器结构提供了可靠依据。  相似文献   

9.
为改善转运站点的作业环境,以转运站部分结构为模拟对象,根据实体结构模型建立流场模型,采用realiza-ble k-epsilon气相湍流模型及拉格朗日颗粒轨道模型对结构内的两相流运动情况进行了数值模拟,得到了流体相的压力分布和速度分布以及固相的粉尘颗粒轨迹,讨论了导料槽中挡帘对流场的影响.结果表明,挡帘对导料槽中流场特征影响明显,在配置了挡帘的导料槽中,流场压力分布更有序,空气流动更集中,可产生一定的回流气体来降低来流气体的速度,且会在内部形成局部高速区域.  相似文献   

10.
喷嘴角度对脱硫塔内气液两相流场的影响   总被引:1,自引:0,他引:1  
提出了采用数值模拟的方法研究喷嘴角度对脱硫塔内部气液两相流场的影响。由于实际脱硫塔尺寸庞大,给实验研究带来困难且成本很高,在数值模拟平台上,分别模拟了45°、75°和-30°3种喷嘴角度布置下脱硫塔内部速度场、温度场变化以及湍流强度的分布情况。结果表明,在角度为-30°布置时速度场变化不是很剧烈,脱硫塔进出口温差比较理想,湍流强度在脱硫塔底部较大随着塔高的增加缓慢降低,这样有助于气液两相均匀混合,并控制出口烟温,有利于提高脱硫效率。  相似文献   

11.
A number of key projects in the Environmental Protection Agency (EPA) particulate R&;D program having applicability to industry are presented. For electrostatic precipitators (ESP) there is presented the result of work on large diameter discharge electrodes which provide a decrease in penetration of up to a factor of 4 when compared to conventional small diameter electrodes. Also discussed is the multistage ESP which provides a collection efficiency that would require a collecting plate area 4 or 5 times larger with conventional ESP technology. The E-SOX technology makes use of the multistage concept to free up space in the ESP for SO2 removals of up to 90%. Electrostatically augmented fabric filtration provides a reduction in pressure drop of about 5 0% as compared to conventional fabric filtration. Wind tunnel modeling of windbreaks for material storage piles indicates a potential for providing engineering design data that would allow significant emission reduction caused by wind erosion  相似文献   

12.
This paper investigates some of the reflectivity characteristics that clouds (when modelled as solid bodies) must exhibit to be compatible with observations that the reflecting surface of a cloud (i) appears almost equally bright across its face, (ii) is brightest when the cloud is opposite to the Sun but decreases in brightness as the cloud moves to other positions and (iii) increases in brightness with increasing optical thickness of the cloud in the observer's line of sight. These observations, respectively, are shown to imply that the peak value of the bidirectional total reflectivity from a cloud surface (i) increases in inverse proportion to the cosine of the angle between the Sun and the normal to the cloud surface, as the incident angle increases, (ii) appears to be directed back in the direction of the incident radiation, and (iii) increases as optical thickness of the cloud in the observer's line of sight increases. The results could have application in many fields (e.g. modelling diffuse radiance distributions for cloudy skies).  相似文献   

13.
14.
张仁泉 《污染防治技术》2005,18(2):15-17,34
在实施ISO/IEC17025:1999标准《检测和校准实验室能力的通用要求》过程中,通过实验室质量管理体系内部审核的实践与系统分析,识别出内部审核实施阶段的关键环节,提出召开首次会议、收集审核证据、确定审核发现和召开末次会议的技术方法,对提高内部审核的质量和有效性、获得可靠的审核结论具有重要意义。  相似文献   

15.
Abstract

A computer model was used to take random samples from primary sample populations obtained from field trials to simulate the uncertainty of sampling for residue analysis of plant commodities and soil. The results indicate about 40%, 30% and 20% relative uncertainty when random samples of size 5, 10 and 25 are taken respectively, from a single lot. Therefore the sample size should be the same for establishing and enforcing legal limits.  相似文献   

16.
结合扬中生态环境的基本情况和存在的不足,进行了具体分析,对扬中未来生态建设的发展方向提出了建议及实施措施。  相似文献   

17.
The most common technique used for numerical simulations of tracer mixing is that of the numerical solution of the advection–diffusion equation with the unresolved fluxes parameterized using the similarity theory. Despite correct predictions of the overall directions of transport, models based on a numerical solution of the advection–diffusion equation lack sufficient accuracy to correctly reproduce the coupling of mixing with small scale processes which are sensitive to the microstructure of the tracer distribution. The objective of this paper is to revisit the basic formalism employed in numerical models used to investigate atmospheric tracers. The main mathematical method proposed here is the theory of kinematics of mixing which could be applied effectively for simulations of atmospheric transport processes. At the beginning of the paper, we introduce simple mathematical transformations in order to demonstrate how complex topological structures are created by mixing processes. These idealistic flow systems are essential to explain transport properties of much more complex three-dimensional geophysical flows. An example of the application of the kinematics of mixing to the analysis of tracer transport on a planetary scale is presented in the following sections. The complex filamentary structures simulated in the numerical experiment are evaluated using some commonly applied statistical measures in order to compare the results with the data published in the literature. The results of the experiment are also analysed with the help of simple conceptual models of fluid filaments. The microstructure of the tracer distribution introduced in the paper is essential to increase our understanding of atmospheric transport and to develop more realistic parameterizations of small-scale mixing. The presented results could also be used to improve calculations of the coupling between microphysical processes and tracer mixing.  相似文献   

18.
介绍了电解法生产次氯酸钠的原理 ,并在原有生产工艺的基础上进行了重新设计和对设备的重新选择、改造 ,得出了各个工艺参数的最佳值 ,生产出高品质的次氯酸钠  相似文献   

19.

Objective

This work aims to investigate the correlation between the photocatalytic activity determined by methylene blue bleaching (DIN 52980), stearic acid degradation, and degradation of acetone in gas phase.

Method

The photocatalytic TiO2 coatings included in this investigation ranged from thin commercially available coatings (ActivTM and BioCleanTM) and ready to use suspensions (Nano-X PK1245) to lab-produced PVD and sol?Cgel coatings. XRD analysis of the photocatalytic coatings showed that all the coatings consisted of nanocrystalline anatase, although the thickness and porosity varied considerably.

Results

The study showed that the reproducibility of the activity measurements was good. However, more importantly, the investigation showed that there is a good correlation between the activities determined by the different methods even though the characteristics of the photocatalytic coatings and the organic probe molecules varied considerably.

Conclusion

The overall findings of this work suggest that there is a good correlation between the investigated methods. These results are promising for the future work concerning standardization of methods for determination of the activity of photocatalytic films.  相似文献   

20.
Bhattacharya A  Sarkar SK 《Ambio》2003,32(1):70-75
India has a very extensive coastline of about 7515 km, rich in diverse living resources. These resources continue to deteriorate with rampant harvesting or are altered for other uses such as aquaculture and fisheries. The present paper deals with degrading coastal habitats in northeastern India, and projects the intensity of the stress arising from the collection of tiger prawn seeds (Penaeus monodon) for aquacultural farms and molluskan shells for poultry feed and edible lime. Indiscriminate exploitation of these resources leads to a heavy reduction of the species concerned and other associated marine communities. The magnitude of such destruction has been quantified. The impacts of biodiversity loss and their after-effects on the ecobalance of this coastal system have become a matter of great concern to ecologists to maintain security and sustainability. The authors propose a public awareness program on themes relating to the importance of biodiversity for human livelihoods.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号