Singlet oxygen generation by photoactive polymeric microparticles with enhanced aqueous compatibility

Two new photoactive materials compatible with environmentally friendly solvents (water and methanol) have been synthesized and characterized. They are comprised of a porous matrix of polystyrene and divinylbenzene with bound Rose Bengal and additional pendant groups added to increase the hydrophilicity (ethylenediamine and γ-gluconolactone). The new polymers are efficient photocatalysts capable of generating singlet oxygen after irradiation with visible light. Photochemical oxygenations of 9,10-anthracenedipropionic acid and 2-furoic acid have been carried out. The measured conversions indicate that the new supported photosensitizers are more effective than the parent hydrophobic polymer. Figure

New photoactive polymers for oxidations in aqueous solvent     

Environmentally friendly system for the degradation of multipesticide residues in aqueous media by the Fenton’s reaction

A Fenton oxidation system employing zero-valent iron (whose source was swarf, a residue of metallurgical industries, in powder form) and hydrogen peroxide for the treatment of an aqueous solution with six pesticides was developed, and the effect of the iron metal content, pH, and hydrogen peroxide concentration was evaluated. The characterization of the aqueous solution resulted in: pH 5.6, 105 mg L^?1 of dissolved organic carbon, and 44.6 NTU turbidity. In addition, the characterization of the swarf by FAAS and ICP-MS showed 98.43?±?7.40 % of zero-valent iron. The removal was strongly affected by the content of iron metal, pH, and hydrogen peroxide concentration. The best degradation conditions were 2.0 g swarf, pH 2.0, and 5 mmol L^?1 H₂O₂. At the end of the treatment, the pesticide degradation ranged from 60 to 100 %, leading to 55 % mineralization. Besides, all hydrogen peroxide was consumed and the determination of total dissolved iron resulted in 2 mg L^?1. Thus, the advantages of this system are rapid degradation (up to 20 min), high-degradation rates, simple handling, and low cost.

Electrochemical removal of synthetic textile dyes from aqueous solutions using Ti/Pt anode: role of dye structure

In this work, the efficiency of electrochemical oxidation (EO) was investigated for removing a dye mixture containing Novacron Yellow (NY) and Remazol Red (RR) in aqueous solutions using platinum supported on titanium (Ti/Pt) as anode. Different current densities (20, 40 and 60 mA cm^?2) and temperatures (25, 40 and 60 °C) were studied during electrochemical treatment. After that, the EO of each of these dyes was separately investigated. The EO of each of these dyes was performed, varying only the current density and keeping the same temperature (25 °C). The elimination of colour was monitored by UV-visible spectroscopy, and the degradation of organic compounds was analysed by means of chemical oxygen demand (COD). Data obtained from the analysis of the dye mixture showed that the EO process was effective in colour removal, in which more than 90 % was removed. In the case of COD removal, the application of a current density greater than 40 mA cm^?2 favoured the oxygen evolution reaction, and no complete oxidation was achieved. Regarding the analysis of individual anodic oxidation dyes, it was appreciated that the data for the NY were very close to the results obtained for the oxidation of the dye mixture while the RR dye achieved higher colour removal but lower COD elimination. These results suggest that the oxidation efficiency is dependent on the nature of the organic molecule, and it was confirmed by the intermediates identified. Figure

Chemical structures of a NY and b RR     

The adsorption process during inorganic phosphorus removal by cultured periphyton

To explain the detailed process involved in phosphorus removal by periphyton, the periphyton dominated by photoautotrophic microorganisms was employed in this study to remove inorganic phosphorus (P _i ) from wastewater, and the removal kinetics and isotherms were then evaluated for the P _i removal process. Results showed that the periphyton was capable of effectively removing P _i that could completely remove the P _i in 24 h at an initial P _i concentration of 13 mg P L^?1. Furthermore, the P _i removal process by the periphyton was dominated by adsorption at initial stage (~24 h), which involved physical mechanistic process. However, this P _i adsorption process was significantly influenced by environmental conditions. This work provides an insight into the understanding of phosphorus adsorption by periphyton or similar microbial aggregates.

Exposure to toxic waste containing high concentrations of hydrogen sulphide illegally dumped in Abidjan, C?te d’Ivoire

Introduction

On August 2006, a cargo ship illegally dumped 500?t of toxic waste containing high concentrations of hydrogen sulphide in numerous sites across Abidjan. Thousands of people became ill. Seventeen deaths were associated with toxic waste exposure.

Materials and methods

This study reports on environmental and health problems associated with the incident. A cross-sectional transect study was conducted in five waste dumping site areas.

Results

Of the households, 62.1% (n?=?502) were exposed to the effects of the pollutants and 51.1% of the interviewed people (n?=?2,368) in these households showed signs of poisoning. Most important symptoms were cough (37.1%), asthenia (33.1%), pruritus (29.9%) and nausea (29.1%).

Discussion

The health effects showed different frequencies in the five waste impact sites. Among the poisoned persons, 21.1% (n?=?532) presented symptoms on the survey day (i.e., 4?months after incident). Transect sampling allowed to determine a radius of vulnerability to exposure of up to 3?km from the point of toxic waste disposal.

Conclusion

The area of higher vulnerability is influenced by various environmental factors, such as size and severity of pollution site, duration of toxic waste pollution on the impact site and locally climatic conditions. The surveillance of effects on environment and human health is warranted to monitor the development.     

Surface-sediment and hermit-crab contamination by butyltins in southeastern Atlantic estuaries after ban of TBT-based antifouling paints

Butyltin (BT) contamination was evaluated in hermit crabs from 25 estuaries and in sediments from 13 of these estuaries along about 2,000 km of the Brazilian coast. BT contamination in hermit crabs ranged from 2.22 to 1,746 ng Sn g^-1 of DBT and 1.32 to 318 ng Sn g^-1 of TBT. In sediment samples, the concentration also varied widely, from 25 to 1,304 ng Sn g^-1 of MBT, from 7 to 158 ng Sn g^-1 of DBT, and from 8 to 565 ng Sn g^-1 of TBT. BTs are still being found in surface sediments and biota of the estuaries after the international and Brazilian bans, showing heterogeneous distribution among and within estuaries. Although hermit crabs were previously tested as an indicator of recent BT contamination, the results indicate the presence of contamination, probably from resuspension of BTs from deeper water of the estuary.

Synthesis and evaluation as biodegradable herbicides of halogenated analogs of L-meta-tyrosine

l-meta-tyrosine is an herbicidal nonprotein amino acid isolated some years ago from fine fescue grasses and characterized by its almost immediate microbial degradation in soil (half-life <24 h). Nine monohalogenated or dihalogenated analogs of this allelochemical have been obtained through a seven-step stereoselective synthesis from commercial halogenated phenols. Bioassays showed a large range of biological responses, from a growth root inhibition of lettuce seedling similar to that noted with m-tyrosine [2-amino-3-(2-chloro-5-hydroxyphenyl)propanoic acid or compound 8b] to an increase of the primary root growth concomitant with a delay of secondary root initiation [2-amino-3-[2-fluoro-5-hydroxy-3-(trifluoromethyl)phenyl]propanoic acid or compound 8h]. Compound 8b was slightly less degraded than m-tyrosine in the nonsterilized nutritive solution used for lettuce development, while the concentration of compound 8h remained unchanged for at least 2 weeks. These data indicate that it is possible to manipulate both biological properties and degradation of m-tyrosine by halogen addition.     

Development of a versatile experimental setup for the evaluation of the photocatalytic properties of construction materials under realistic outdoor conditions

The interest on outdoor photocatalytic materials is growing in the last years. Nevertheless, most of the experimental devices designed for the assessment of their performance operate at controlled laboratory conditions, i.e., pollutant concentration, temperature, UV irradiation, and water vapor contents, far from those of real outdoor environments. The aim of the present study was the design and development of an experimental device for the continuous test of photocatalytic outdoor materials under sun irradiation using real outdoor air as feed, with the concomitant fluctuation of pollutant concentration, temperature, and water vapor content. A three-port measurement system based on two UV-transparent chambers was designed and built. A test chamber contained the photoactive element and a reference chamber to place the substrate without the photoactive element were employed. The third sampling point, placed outdoors, allowed the characterization of the surrounding air, which feeds the test chambers. Temperature, relative humidity (RH), and UV-A irradiance were monitored at each sampling point with specific sensors. NO _x concentration was measured by a chemiluminescence NO _x analyzer. Three automatic valves allowed the consecutive analysis of the concentration at the three points at fixed time intervals. The reliability of the analytical system was demonstrated by comparing the NO _x concentration data with those obtained at the nearest weather station to the experimental device location. The use of a chamber-based reaction system leads to an attenuation of NO _x and atmospheric parameter profiles, but maintaining the general trends. The air characterization results showed the wide operating window under which the photoactive materials should work outdoors, depending on the traffic intensity and the season, which are reproduced inside the test chambers. The designed system allows the measurement of the photoactivity of outdoor materials or the comparison of several samples at the same time. The suitability of the system for the evaluation of the DeNO _x properties of construction elements at realistic outdoor conditions was demonstrated. The designed experimental device can be used 24/7 for testing materials under real fluctuations of NO _x concentration, temperature, UV irradiation, and relative humidity and the presence of other outdoor air pollutants such as VOCs, SO _x , or NH₃. The chamber-based design allows comparing a photocatalytic material with respect to a reference substrate without the photoactive phase, or even the comparison of several outdoor elements at the same time. Figure

?     

Enhanced reduction of phenol content and toxicity in olive mill wastewaters by a newly isolated strain of Coriolopsis gallica

The search for novel microorganisms able to degrade olive mill wastewaters (OMW) and withstand the toxic effects of the initially high phenolic concentrations is of great scientific and industrial interest. In this work, the possibility of reducing the phenolic content of OMW using new isolates of fungal strains (Coriolopsis gallica, Bjerkandera adusta, Trametes versicolor, Trichoderma citrinoviride, Phanerochaete chrysosporium, Gloeophyllum trabeum, Trametes trogii, and Fusarium solani) was investigated. In vitro, all fungal isolates tested caused an outstanding decolorization of OMW. However, C. gallica gave the highest decolorization and dephenolization rates at 30 % v/v OMW dilution in water. Fungal growth in OMW medium was affected by several parameters including phenolic compound concentration, nitrogen source, and inoculum size. The optimal OMW medium for the removal of phenolics and color was with the OMW concentration (in percent)/[(NH₄)₂SO₄]/inoculum ratio of 30:6:3. Under these conditions, 90 and 85 % of the initial phenolic compounds and color were removed, respectively. High-pressure liquid chromatography analysis of extracts from treated and untreated OMW showed a clear and substantial reduction in phenolic compound concentrations. Phytotoxicity, assessed using radish (Raphanus sativus) seeds, indicated an increase in germination index of 23–92 % when a 30 % OMW concentration was treated with C. gallica in different dilutions (1/2, 1/4, and 1/8).

Heavy metals of the Tibetan top soils

Objective

Due to its high elevation, rare human activities and proximity to south Asia where industries are highly developed, it is required to investigate the fragile environment of the Tibetan Plateau. We are aiming to obtain the concentration level, source, spatial distribution, temporal variation and potential environmental risk of Tibetan soils.

Methods

A total of 128 surf ace soil samples were collected and analyzed f or V, Cr, Mn, Co, Ni, Cu, Zn, As, Cd and Pb, and an additional 111 samples were analyzed f or Hg and total organic carbon. Concentration comparisons coupled with multivariate statistics were used to analysis the sources of elements of soils. We also carried out Risk assessment on the soils.

Results

Concentrations of Hg, Cr, Ni, Cd and Pb are slightly higher than those of the late 1970s. Concentrations of Cr and Ni are higher than averaged world background values. Tibetan soils present a high natural As concentration level.

Discussion

Anthropogenic sources may partly contribute to the elevated Hg, Cd and Pb concentrations. Cr and Ni are mainly originated from soil parent materials. Soil elements in Anduo and Qamdo regions may threaten the health of local people.

Conclusion

Heavy metal elements of Tibetan Plateau are mainly from the natural source. Arsenic present a high background level. Soil elements in Anduo and Qamdo regions may threaten the health of local people, which should be of concern to scientists and the government.     

Human health risk from organ-specific accumulation of toxic metals and response of antioxidants in edible fish species from Chenab River,Pakistan

In the current study, the bioaccumulation of essential and nonessential metals and related antioxidant activity were analyzed in three organs (muscle, gills, and liver) of herbivorous (HF) and carnivorous (CF) edible fish of Chenab River. The comparative analysis revealed a more heterogeneous accumulation of metals in the muscles of HF fish than that of CF fish [chromium (Cr, 3.4 μg g^?1), cobalt (Co, 1.7 μg g^?1), copper (Cu, 3 μg g^?1), and iron (Fe, 45 μg g^?1) versus Cr (1.3 μg g^?1), Co (0.1 μg g^?1), Cu (1.1 μg g^?1), and Fe (33 μg g^?1), respectively, P?<?0.001]. These results implied an organ-specific accumulation of metals at different trophic levels. According to logistic regression analysis, the bioaccumulation of metals had marked differences in HF and CF. The antioxidant activity was significantly related to the tissue type and the metals to which the organs are exposed to. The liver of CF fish had a higher activity of antioxidant superoxide dismutase (SOD), catalase (CAT), glutathione (GSH), and lipid peroxidase (LPO) than that of HF (P?<?0.05). LPO and guaiacol peroxidase (POD) in both groups were associated with a number of metals, but in HF, cadmium (Cd), Cr, Pb, and Zn were more related with the LPO and SOD activities. Moreover, Cd, Co, Fe, Pb, Ni, Cu, and Zn were above the permissible limits set by various agencies. In numerous cases, our results were even higher than those previously reported in the literature. The results provide an insight into the pollution pattern of Chenab River. These results may be helpful in the future to identify biomarkers of exposure in aquatic organisms.

Occurrence of diarrheagenic Escherichia coli genes in raw water of water treatment plants

Purpose

The high incidences of waterborne diseases are frequently associated with diarrheagenic Escherichia coli (DEC). DEC may pose a health risk to people who contact surface water for recreation or domestic use. However, there is no published report on the monitoring of DEC in drinking water sources in Taiwan. In this study, the occurrence of DEC genes in raw water for water treatment plants in Taiwan was investigated.

Method

Raw water samples were taken from water treatment plants adjacent to the Kaoping River in southern Taiwan. Each water sample was treated with membrane filtration followed by DNA extraction from the concentrate and concentrate enrichment, respectively. The target genes for various DEC strains of genes were identified, including enteroaggregative E. coli (EAEC), enterohemorrhagic E. coli (EHEC), enteroinvasive E. coli (EIEC), enteropathogenic E. coli (EPEC), and enterotoxigenic E. coli (ETEC).

Results

Among 55 water samples analyzed, DEC genes were detected in 16 (29.1%) samples. Strain-specific genes for EAEC, EHEC, EIEC, and EPEC were found in the percentages of 3.6%, 10.9%, 9.1%, and 9.1%, respectively. The specific gene for ETEC is not detected in the study. By looking at the presence/absence of specific genes and water sample characteristics, water temperature was found to differ significantly between samples with and without EHEC gene. In addition, pH levels differed significantly for EHEC and EPEC presence/absence genes, and turbidity was significantly different for water with and without EPEC genes.

Conclusion

DEC genes were detected in 29.1% of the raw water samples in the study location. The potential health threat may be increased if the treatment efficiencies are not properly maintained. Routine monitoring of DEC in drinking water sources should be considered.     

Cloud point extraction for the preconcentration of palladium and lead in environmental samples and determination by flow injection flame atomic absorption spectrometry

Purpose

An online cloud-point extraction (CPE) coupled with flow injection method is developed for the separation and preconcentration of palladium and lead from various matrices using flame atomic absorption spectrometry (FAAS).

Method

The method employs the formation of complexes of the metallic species with dimethylglyoxime, which are subsequently entrapped in the micelles of the surfactant Triton X-114, upon increase of the solution temperature to 60°C and loaded into the flow injection system at a flow rate of 4.6?mL?min^?1. The surfactant rich-phase was retained in a minicolumn packed with animal wool at pH?6 and eluted with 1.0?mol?L^?1 nitric acid in methanol at a flow rate of 1.1?mL?min^?1 directly into the nebulizer of the FAAS. The CPE variables and flow injection conditions affecting the analytical performance of the combined methodology was studied and optimized.

Results

Under the optimized conditions for 25?mL of preconcentrated solution, the enrichment factors were 51 and 44, and the limit of detections were 1.0 and 1.4?ng?mL^?1 for palladium and lead, respectively. Finally, the developed method was applied for the determination of palladium and lead in street dust, soil, radiology waste, catalytic converter, and urban aerosol samples.

Conclusions

Cloud-point extraction coupled with flow injection-FAAS was proposed as an effective preconcentration and separation method for Pd and Pb determination in radiology waste, road dust, soil, and urban aerosol samples. The most favorable feature of this method is its much higher selectivity, sensitivity, rapidity, good extraction efficiency, and employs the green chemistry concept, as it does not require the addition of toxic chemicals. In addition, this proposed method gives very low detection limits and good relative standard.     

Microwave-assisted synthesis of hydroxyapatite for the removal of lead(II) from aqueous solutions

Purpose

This study has the objective to evaluate the lead(II) removal capacity of hydroxyapatite powder synthesized by microwave as an alternative method to decrease production time and cost.

Methods

Hydroxyapatite (HA) was synthesized by a microwave-assisted precipitation method using calcium nitrate and ammonium hydrogen phosphate as calcium and phosphorus sources, respectively. X-ray diffraction and Fourier transform infrared results clearly revealed that the resulting powder was HA with high purity and crystallinity. The obtained powder was used for the removal of lead(II) from aqueous solutions. The effects of pH, amount of adsorbent, initial lead(II) concentration, and contact time were studied in batch experiments.

Results

In the adsorption experiments, maximum lead(II) retention was obtained at pH 6. Adsorption equilibrium was established after 40 min. It was found that the adsorption of lead(II) on HA was correlated well (R ²?=?0.958) with the Freundlich equation for the concentration range studied. Both ion exchange and adsorption process were thought to exist in the removal process.

Conclusions

This study indicates that easily and rapidly synthesized HA by microwave-assisted precipitation method could be used as an efficient adsorbent for removal of lead(II) from aqueous solutions.     

Detection of DNA damage in fish Oreochromis mossambicus induced by co-exposure to phenanthrene and nitrite by ESI-MS/MS

Background, aim, and scope

Mutagenic nitrated polycyclic aromatic hydrocarbons (nitro-PAHs) have been known to arise in the environment through direct emissions from combustion sources and nitration of PAHs, primarily in the atmosphere. In the marine environment, PAHs are one of the classic anthropogenic organic pollutants, while nitrite (NO ₂ ^– ) is produced naturally via various biological processes like imbalance in nitrification/denitrification or eutrophication and subsequent oxygen depletion from an oversupply of nutrients. In this paper, we report the formation of PAH-DNA adducts in fish contaminated with PAHs and exposed to NO ₂ ^– in the ambient water. Electrospray ionization tandem mass spectrometric (ESI-MS/MS) analysis of the bile of the euryhaline fish Oreochromis mossambicus exposed simultaneously to field relevant sublethal concentrations of phenanthrene and NO ₂ ^– and collision-induced dissociation of selected ions revealed the presence of DNA-PAH adducts. The present study indicates that, although several high sensitivity techniques have been developed for the analysis of PAH derived DNA adducts, MS/MS has emerged as a powerful tool in the detection and structure elucidation of DNA adducts.

Materials and methods

Juvenile O. mossambicus from a local estuarine fish farm were used with increasing frequency for carcinogenicity testing and comparative cancer research. The fish were exposed to the alkylating agent phenanthrene in the presence of NO ₂ ^– . Composite untreated bile samples after dilution with methanol: water (1:1; v/v) were analyzed by ESI-MS.

Results

Several adducts could be evidenced in the bile by MS/MS. Deoxyadenosine/deoxyguanosine having a mass in the range of 450–650 amu is detected. In addition, a segment of modified dinucleotide with a mass that corresponds to a dimer consisting of a modified guanosine and a normal guanosine has also been identified in the bile.

Discussion

The formation of certain types of DNA adducts is a crucial step in the induction of cancer and a primary stage in mutagenesis. Phenanthrene injected by i.p. route led to the transformation of phenanthrene to N-formyl amino phenanthrene-N ⁶-deoxyadenosine adduct, whereas the fish co-exposed to phenanthrene and ambient nitrite metabolizes PAH to mono-, di- as well as trinitro derivatives, which then react with DNA leading to the formation of mainly modified guanosine and adenosine adducts. In the present investigation, dinitrophenanthrene diol epoxide (DNPDE) adduct with guanosine (m/z 587) seems to be the dominant adduct in the mixture, and its presence is shown first as a comparatively less stable adduct, which decomposes to give a more stable N² adduct (m/z 567).

Conclusions

MS/MS has proved to be useful in the rapid determination and discrimination of structurally different phenanthrene/derivatives DNA adducts in a complex mixture of fish bile co-exposed to phenanthrene and nitrite. However, the nature of metabolites formed is likely determined by the route of PAH administration, and there is a need to further define the early biochemical events of carcinogenesis in these species.

Recommendations and perspectives

DNA adduct analysis in fish bile offers a promising approach to study the risk of potentiation of anthropogenic chemicals into genotoxic compounds in the presence of nitrite in the marine environment. We believe this is the first report on the formation of DNA-phenanthrene adducts on co-exposure of the fish to PAH and nitrite.     

The influence of hydroxyl volatile organic compounds on the oxidation of aqueous sulfur dioxide by oxygen

Although the effect of volatile organic compounds (VOCs) on the oxidation of dissolved sulfur dioxide by oxygen has been the subject of many investigations, this is the first study which examines the effect of a large number of precisely 16 hydroxy compounds. The kinetics both in the absence and the presence of VOCs was defined by rate laws (A and B): A $$ \hbox{-} \mathrm{d}\left[\mathrm{S}\left(\mathrm{IV}\right)\right]/\mathrm{dt}={R}_o={k}_o\left[\mathrm{S}\left(\mathrm{IV}\right)\right] $$ B $$ \hbox{-} \mathrm{d}\left[\mathrm{S}\left(\mathrm{IV}\right)\right]/\mathrm{dt}={R}_i={k}_i\left[\mathrm{S}\left(\mathrm{IV}\right)\right] $$ where R _o and k _o are the initial rate and first-order rate constant, respectively, in the absence of VOCs, R _i , and k _i are the initial rate and the first-order rate constant, respectively, in the presence of VOCs, and [S(IV)] is the concentration of dissolved sulfur dioxide, sulfur(IV). The nature of the dependence of k _i on the concentration of inhibitor, [Inh], was defined by Eq. (C). C $$ {k}_i={k}_0/\left(1+B\left[\mathrm{Inh}\right]\right) $$ where B is an empirical inhibition parameter. The values of B have been determined from the plots of 1/k _i versus [Inh]. Among aliphatic and aromatic hydroxy compounds studied, t-butyl alcohol and pinacol were without any inhibition effect due to the absence of secondary or tertiary hydrogen. The values of inhibition parameter, B, were related to k _inh , the rate constant for the reaction of SO₄ ^? radical with the inhibitor, by Eq. (D). D $$ B=\left(9\pm 2\right)\times 1{0}^{-4}\times {k}_{inh} $$ Equation (D) may be used to calculate the values of either of B or k _inh provided that the other is known. The extent of inhibition depends on the value of the composite term, B[Inh]. However, in accordance with Eq. (C), the extent of inhibition would be sizeable and measurable when B[Inh]?>?0.1 and oxidation of S(IV) would be almost completely stopped when B[Inh]?≥?10. B[Inh] value can be used as a guide whether the reaction step: SO₄ ^??+?organics? \( \overset{k_{inh}}{\to } \) ?SO₄ ^2??+?non-chain products: should be included in the multiphase models or not.     

Application of central composite face-centered design and response surface methodology for the optimization of electro-Fenton decolorization of Azure B dye

Purpose

The aim of this work was to improve the ability of electro-Fenton technique for the remediation of wastewater contaminated with synthetic dyes using a model azo dye such as Azure B.

Methods

Batch experiments were conducted to study the effects of main parameters, such as dye concentration, electrode surface area, treatment time, and voltage. In this study, central composite face-centered experimental design matrix and response surface methodology were applied to design the experiments and evaluate the interactive effects of the four studied parameters. A total of 30 experimental runs were set, and the kinetic data were analyzed using first- and second-order models.

Results

The experimental data fitted to the empirical second-order model of a suitable degree for the maximum decolorization of Azure B by electro-Fenton treatment. ANOVA analysis showed high coefficient of determination value (R ²?=?0.9835) and reasonable second-order regression prediction. Pareto analysis suggests that the variables, time, and voltage produce the largest effect on the decolorization rate.

Conclusion

Optimum conditions suggested by the second-order polynomial regression model for attaining maximum decolorization were dye concentration 4.83?mg/L, electrode surface area 15?cm², voltage 14.19?V, and treatment time of 34.58?min.     

Accumulation of heavy metals in native Andean plants: potential tools for soil phytoremediation in Ancash (Peru)

Metal contamination is a recurring problem in Peru, caused mainly by mine tailings from a past active mining activity. The Ancash region has the largest number of environmental liabilities, which mobilizes high levels of metals and acid drainages into soils and freshwater sources, posing a standing risk on human and environmental health. Native plant species spontaneously growing on naturally acidified soils and acid mine tailings show a unique tolerance to high metal concentrations and are thus potential candidates for soil phytoremediation. However, little is known about their propagation capacity and metal accumulation under controlled conditions. In this study, we aimed at characterizing nine native plant species, previously identified as potential hyperaccumulators, from areas impacted by mine tailings in the Ancash region. Plants were grown on mine soils under greenhouse conditions during 5 months, after which the concentration of Cd, Cu, Ni, Pb, and Zn was analyzed in roots, shoots, and soils. The bioaccumulation (BAF) and translocation factor (TF) were calculated to determine the amount of each metal accumulated in the roots and shoots and to identify which species could be better suited for phytoremediation purposes. Soil samples contained high Cd (6.50–49.80 mg/kg), Cu (159.50–1187.00 mg/kg), Ni (3.50–8.70 mg/kg), Pb (1707.00–4243.00 mg/kg), and Zn (909.00–7100.00 mg/kg) concentrations exceeding national environmental quality standards. After exposure to mine tailings, concentrations of metals in shoots were highest in Werneria nubigena (Cd, 16.68 mg/kg; Cu, 41.36 mg/kg; Ni, 26.85 mg/kg; Zn, 1691.03 mg/kg), Pennisetum clandestinum (Pb, 236.86 mg/kg), and Medicago lupulina (Zn, 1078.10 mg/kg). Metal concentrations in the roots were highest in Juncus bufonius (Cd, 34.34 mg/kg; Cu, 251.07 mg/kg; Ni, 6.60 mg/kg; Pb, 718.44 mg/kg) and M. lupulina (Zn, 2415.73 mg/kg). The greatest BAF was calculated for W. nubigena (Cd, 1.92; Cu, 1.20; Ni, 6.50; Zn, 3.50) and J. bufonius (Ni, 3.02; Zn, 1.30); BCF for Calamagrostis recta (Cd, 1.09; Cu, 1.80; Ni, 1.09), J. bufonius (Cd, 3.91; Cu, 1.79; Ni, 18.36), and Achyrocline alata (Ni, 137; Zn, 1.85); and TF for W. nubigena (Cd, 2.36; Cu, 1.70; Ni, 2.42; Pb, 1.17; Zn, 1.43), A. alata (Cd, 1.14; Pb, 1.94), J. bufonius (Ni, 2.72; Zn, 1.63), and P. clandestinum (Zn, 1.14). Our results suggest that these plant species have a great potential for soil phytoremediation, given their capability to accumulate and transfer metals and their tolerance to highly metal-polluted environments in the Andean region.     

Characterization and lead(II), cadmium(II), nickel(II) biosorption of dried marine brown macro algae Cystoseira barbata

Purpose

The objectives of this research are to identify the functional groups and determine corresponding pK _a values of the acidic sites on dried brown algae Cystoseira barbata using FTIR and potentiometric titrations, and to investigate the biosorption ability of biomass towards divalent nickel, cadmium, and lead ions. Adsorption was studied as a function of solution pH and contact time, and experimental data were evaluated by the Langmuir isotherm model.

Methods

CaCl₂ pretreatment was applied to the sorbent for enhancing the metal uptake capacity. The effect of solution pH on biosorption equilibrium was investigated in the pH range of 1.5?C5.0. Individual as well as competitive adsorption capacity of the sorbent were studied for metal cations and mixtures.

Results

The retention of the tested metal ions was mostly influenced from pH in the range of 1.5?C2.5, then stayed almost constant up to 5.0, while Ni(II) uptake showed the highest variation with pH. Potentiometric titrations were performed to find the number of strong and weak acidic groups and their acidity constants. The density of strong and weak acidic functional groups in the biomass were found to be 0.9 and 2.26?mmol/g, respectively. The FTIR spectra of the sorbent samples indicated various functionalities on the biomass surface including carboxyl, hydroxyl, and amino and sulphonate groups which are responsible for the binding of metal ions.

Conclusions

The capacity of the biomass for single metal ions (around 1?mmol/g) was increased to 1.3?mmol/g in competitive adsorption, Pb(II) showing the highest Langmuir intensity constant. Considering its extremely high abundance and low cost, C. barbata may be potentially important in metal ion removal from contaminated water and industrial effluents.