多胺功能化介孔炭对Pb（Ⅱ）的吸附动力学与机制

采用硝酸氧化和乙二胺聚合在微波辅助磷酸活化中孔蔗渣基介孔炭孔道内修饰了含氮多胺基团,制备了多胺功能化生物质炭材料AC-EDA,分析了溶液pH、初始浓度和吸附时间等参数对材料吸附Pb(Ⅱ)影响,探讨了其动力学吸附行为与吸附机制.结果表明,多胺功能化炭材料AC-EDA对Pb(Ⅱ)有较好的吸附效率,5 min内可达饱和吸附量的70%;酸性条件下,增大溶液pH有利于Pb(Ⅱ)吸附;材料AC-EDA对Pb(Ⅱ)的吸附位能量存在差异化,在吸附初始阶段,吸附速率由颗粒内扩散控制,中后期主要由膜扩散控制;准二级方程能很好地描述多胺功能化炭材料对Pb(Ⅱ)的吸附动力学行为.AC-EDA对Pb(Ⅱ)的吸附是自发的吸热反应过程,提高温度对铅(Ⅱ)离子吸附有促进作用;D-K-R吸附能>11 kJ·mol-1,表明化学反应在Pb(Ⅱ)吸附过程中起主导作用;吸附Pb(Ⅱ)前后的AC-EDA材料XPS图谱表明,多胺基团参与了吸附反应,是材料高效吸附Pb(Ⅱ)的重要因素.     

Fe-NH_4Cl改性南荻生物炭对Pb~(2+)吸附性能研究

以南荻秸秆生物炭为实验原料,利用Fe-NH4Cl进行改性,研究其对Pb2+的吸附效果。通过考察生物炭用量、溶液初始p H值、吸附时间及溶液初始浓度对吸附的影响,并对吸附前后生物炭样品进行傅里叶变换红外光谱分析(FITR)、比表面积(BET)、X-射线衍射(XRD)、电镜扫描(SEM)表征。结果表明在pH=5、溶液浓度为50 mg/L、温度为30℃、吸附时间为180 min、吸附剂用量在1.4 g/L、改性生物炭对Pb~(2+)吸附量达35.4 mg/g,与未改性生物炭相比吸附量提高20倍左右。生物炭对Pb~(2+)的吸附机理主要为表面羟基(—OH)和羰基(C=O)与Pb2+表面发生络合化学反应作用。     

复合金属改性生物炭对水体中低浓度磷的吸附性能

通过FeCl_3和KMnO_4溶液对果壳生物炭进行浸渍改性,探索复合改性生物炭(Fe:Mn=1:1)对低浓度磷的吸附性能.结果表明,铁锰复合改性生物炭对低浓度磷的吸附效果远远大于铁改性及锰改性; SEM和FT-IR测定表明,铁锰复合改性后生物炭表面可能存在铁锰氧化物和铁氢氧化物.在磷浓度为0. 5 mg·L~(-1)、温度为298 K、固液比(mg∶L)为500时,吸附量为0. 96 mg·g~(-1).当溶液的pH为4～10,均具有较高的去除率和吸附量.等温吸附实验数据符合Freundlich方程,为多层吸附.吸附热力学研究表明,ΔG~θ0、ΔH~θ 0和ΔS~θ 0,说明该吸附是自发、熵增加的吸热过程.吸附动力学分析发现,改性后生物炭在60 min内基本达到吸附平衡,吸附过程符合准二级动力学方程,以化学吸附为主.可为天然水体和污水处理厂低浓度除磷提供理论数据支撑.     

蔗渣炭吸附有机磷农药乐果的过程机制

针对有机磷农药造成环境水污染亟待解决的问题,采用炭吸附剂吸附去除是一种有效的技术。以有机磷农药乐果为目标污染物、制糖工业产生的废弃物甘蔗渣为炭吸附剂原材料,系统研究裂解温度、蔗渣炭用量、溶液温度和乐果浓度等因素对蔗渣炭吸附去除乐果性能影响。研究结果表明蔗渣炭的比表面积、孔径、孔容、炭化程度和极性取决于裂解温度。当裂解温度从400℃升温至600℃,蔗渣炭的比表面积和孔容分别提高了2.8倍和2.6倍;蔗渣炭的孔主要以微孔为主;碳和氧元素是构成蔗渣炭的主要元素。蔗渣炭吸附乐果的过程符合伪二级动力学模型和和Langmuir等温吸附模型;吸附过程本质是自发和放热反应。蔗渣炭对乐果的理论最大吸附能力为48.17 mg/g。     

胺硫改性生物炭对水溶液中不同重金属离子的吸附特性及吸附稳定性

以玉米秸秆为原料热裂解制备生物炭,利用二乙烯三胺和二硫化碳,通过酸化氧化,曼妮希反应胺基改性、二硫化碳巯基取代对生物炭进行胺硫双基团改性,研究胺硫改性生物炭(BC-SN)对Pb2+、Ni2+及Cd2+在单一和三元体系下的吸附特性和吸附稳定性.表征分析证实了生物炭表面胺硫双基团改性成功,且具有比表面积大、表面官能团丰富的...     

高锰酸钾改性桉木生物炭对Pb(Ⅱ)的吸附特性

以桉木为原料,使用高锰酸钾对桉木生物炭（BC）进行改性,制备改性生物炭（KBC）.对其进行表征,并进行了水溶液中Pb （Ⅱ）的静态吸附实验,探究了溶液pH、吸附剂投加量、吸附时间、温度和初始浓度对Pb （Ⅱ）的吸附效果影响.结果表明,最佳吸附反应pH为5,吸附在6 h达到饱和,当温度为25℃,Pb （Ⅱ）的初始浓度为100mg ·L^-1,吸附剂投加量为0.06 g时,KBC对Pb （Ⅱ）的最大吸附量为83.059mg ·g^-1,去除率为99.67%.KBC对Pb （Ⅱ）的吸附遵循二级动力学模型和Langmuir等温吸附模型,其是发生在均匀表面的单层吸附.采用BET、SEM-EDS、XRD、FT-IR和XPS对吸附剂进行表征分析,发现吸附机制主要是KBC含氧和KBC含锰基团通过络合作用和沉淀作用来吸附Pb （Ⅱ）,以及在吸附过程中生物炭表面会形成—O—Pb—O—双齿配合物.因此,高锰酸钾改性BC可以作为一种很好的Pb （Ⅱ）吸附剂.     

改性芦苇生物炭对水中低浓度磷的吸附特征

为吸附处理低浓度含磷废水和实现芦苇资源化利用,将湿地植物芦苇制备成生物炭,通过负载氯化铁进行改性,探究了改性芦苇生物炭对水体中磷的吸附特征.结果表明,改性后芦苇生物炭的含铁量为11.98 mg·g~(-1),是改性前的44.7倍;改性芦苇生物炭p H_(pzc)为7.49,当溶液p H为7.0时,吸附效果最好;在磷溶液浓度为4.0 mg·L~(-1)、温度为298K时,改性芦苇生物炭平衡吸附量为0.658 mg·g~(-1),是未改性生物炭吸附量的34.6倍.研究不同温度下的吸附等温线,Langmiur方程很好地拟合不同温度的吸附等温线,该吸附是单层吸附,温度升高有利于吸附.吸附热力学研究表明,ΔG~θ0、ΔH~θ0和ΔS~θ0,说明该吸附是自发、熵增的吸热过程.假二级方程很好地拟合改性芦苇生物炭吸附磷的动力学数据,初始吸附速率随初始浓度的增大而增大,该吸附主要受颗粒内扩散控制.该研究为改性芦苇生物炭用于污水处理厂和水体深度除磷提供基础数据.     

多微孔苄基化木粉对Cu2+和Pb2+的吸附研究

以中国杉木粉为研究对象,经苄基化改性和水热处理制得多微孔苄基化木粉.同时,以多微孔苄基化木粉为吸附材料,研究了苄基化木粉的增重率、溶液的p H值、接触时间、离子初始浓度和吸附温度等因素对Cu2+和Pb2+吸附效果的影响,并采用红外光谱、扫描电镜、核磁共振等分析手段对木粉改性与水热处理前后的材料进行了结构表征.结果表明:木粉经苄基化改性及水热处理后所制得的多微孔苄基化木粉对Cu2+和Pb2+的吸附百分率比原木粉分别提高57%和209%,木粉的苄基化程度、溶液的p H值、接触时间、离子初始浓度和温度是影响Cu2+和Pb2+吸附百分率的重要因素.当溶液的p H值为5.5,Cu2+和Pb2+的浓度为30 mg·L-1,吸附温度为40℃,吸附时间为60 min,多微孔苄基化木粉质量为溶液质量的2.0%时,Cu2+去除率达94.4%,Pb2+去除率达88.7%.     

硝酸改性显著提高花生壳生物炭对Cd2+的去除能力

本研究采用热分解的方法制备花生壳生物炭,并用乙醇、硝酸和高锰酸钾溶液对其进行改性。分别研究不同方法改性后生物炭吸附Cd²⁺的性能对初始浓度、吸附时间和pH的响应特征并通过吸附热力学和动力学探索吸附机理。结果表明,改性后的花生壳生物炭对Cd²⁺的吸附量和去除率明显提高。在花生壳投加量一定的情况下,综合分析得知硝酸改性后对Cd²⁺吸附效果最佳,吸附量为48.47 mg/g,去除率为96.94%。最佳条件为：Cd²⁺初始浓度200 mg/L,pH为7,吸附时间120 min。     

MnO2改性累托石/污泥生物炭复合材料的制备及其对Pb(Ⅱ)和Cd(Ⅱ)吸附特性研究

为提高累托石/污泥生物炭复合材料的吸附特性,在通过混合热解法制备的累托石/污泥生物炭复合材料的基础上,利用氧化还原反应制备得到MnO_2改性的累托石/污泥生物炭复合材料,对改性前后的复合材料进行了表征和吸附特性研究。结果表明:MnO_2改性的累托石/污泥生物炭复合材料的比表面积以及微孔和介孔的数量远高于未改性的复合材料,改性复合材料中的MnO_2是无定形的且材料表面含有丰富的含氧官能团;改性后的复合材料对Pb(Ⅱ)和Cd(Ⅱ)的吸附量远高于未改性的复合材料,其吸附过程受pH值的影响较大;该改性复合材料对Pb(Ⅱ)和Cd(Ⅱ)的吸附动力学和等温线分别符合Elovich模型和Langmuir等温线方程,其吸附热力学分析结果表明该改性复合材料对Pb(Ⅱ)和Cd(Ⅱ)的吸附过程是自发的吸热过程,且混乱度增加。可见,MnO_2改性的累托石/污泥生物炭复合材料是一种具有潜力的重金属吸附剂。     

Functionalized CMK-3 mesoporous carbon with 2-amino-5-mercapto-1,3,4-thiadiazole for Hg(II) removal from aqueous media

Ordered mesoporous carbon（CMK-3） was synthesized and functionalized with 2-amino-5-mercapto-1,3,4-thiadiazole groups（AMT-OCMK-3） for Hg（Ⅱ） removal from aqueous solution. The modified CMK-3 was characterized by X-ray diffraction, N2adsorption-desorption isotherm, scanning electron microscopy and Fourier transform infrared spectroscopy. The effects of solution pH, contact time, initial Hg（Ⅱ） concentration and matrix effect were studied. The adsorption data were successfully fitted with the Langmuir model, exhibiting high adsorption capacity of 450.45 mg/g of AMT-OCMK-3. In the solid-phase extraction system a series of experimental parameters such as sample flow rate, sample volume,eluent volume and concentration of the eluent solution have been investigated and established for preconcentration of Hg（Ⅱ） in aqueous solution. The results showed that the enrichment factor for Hg（Ⅱ） was 250, the precision（relative standard deviation（RSD）, %） for six replicate measurements was 2.05% and the limit of detection for Hg（Ⅱ） was achieved at0.17 μg/L.     

羧基甲壳素对Pb(Ⅱ)的吸附性能及机理研究

为了提高甲壳素对Pb²⁺吸附性能,采用2,2,6,6-四甲基哌啶-1-氧基（TEMPO）/次氯酸钠（NaClO）/溴化钠（NaBr）氧化体系对甲壳素羧基化改性.采用FTIR、Solid ¹³C-NMR、XRD和SEM-EDX等对羧基甲壳素结构和形貌进行表征,考察了不同NaClO用量制备的羧基甲壳素、溶液pH值、Pb（Ⅱ）初始浓度、吸附时间和离子强度对吸附量的影响,利用XPS探究其吸附机理.结果表明,氧化改性不改变甲壳素的晶型,羧基出现在甲壳素晶体表面;NaClO用量和溶液pH值对吸附量影响显著,pH值为4.0~6.0,NaClO用量为30mL制备的羧基甲壳素吸附效果好,60min达到平衡,室温下饱和吸附量达233.64mg/g;吸附动力学符合准二阶动力学方程,吸附等温线符合Freundlich等温吸附模型,吸附机理包括静电作用、络合配位和离子交换.     

Synthesis, characterization, and adsorption performance of Pb（Ⅱ）-imprinted polymer in nano-TiO2 matrix

Surface ion-imprinted in combination with sol-gel process was applied to synthesis a new Pb(II)-imprinted polymer for selective separation and enrichment of trace Pb(II) from aqueous solution. The prepared material was characterized by using the infrared spectra, X-ray di ractometer, and scanning electron microscopy. The batch experiments were conducted to study the optimal adsorption condition of adsorption trace Pb(II) from aqueous solutions on Pb(II)-imprinted polymer. The equilibrium was achieved in approximately 4.0 h, and the experimental kinetic data were fitted the pseudo second-order model better. The maximum adsorption capacity was 22.7 mg/g, and the Langmuir equation fitted the adsorption isotherm data. The results of selectivity experiment showed that selectively adsorbed rate of Pb(II) on Pb(II)-imprinted polymer was higher than all other studied ions. Desorption conditions of the adsorbed Pb(II) from the Pb(II)-imprinted polymer were also studied in batch experiments. The prepared Pb(II)-imprinted polymer was shown to be promising for the separation and enrichment of trace Pb(II) from water samples. The adsorption and desorption mechanisms were proposed.     

Synthesis of linear low-density polyethylene-g-poly (acrylic acid)-co-starch/organo-montmorillonite hydrogel composite as an adsorbent for removal of Pb(Ⅱ) from aqueous solutions

The purpose of this work is to remove Pb(II) from the aqueous solution using a type of hydrogel composite. A hydrogel composite consisting of waste linear low density polyethylene, acrylic acid, starch, and organo-montmorillonite was prepared through emulsion polymerization method. Fourier transform infrared spectroscopy (FTIR), Solid carbon nuclear magnetic resonance spectroscopy (CNMR)), silicon^-29 nuclear magnetic resonance spectroscopy (Si NMR)), and X-ray diffraction spectroscope ((XRD) were applied to characterize the hydrogel composite. The hydrogel composite was then employed as an adsorbent for the removal of Pb(II) from the aqueous solution. The Pb(II)-loaded hydrogel composite was characterized using Fourier transform infrared spectroscopy (FTIR)), scanning electron microscopy (SEM)), and X-ray photoelectron spectroscopy ((XPS)). From XPS results, it was found that the carboxyl and hydroxyl groups of the hydrogel composite participated in the removal of Pb(II). Kinetic studies indicated that the adsorption of Pb(II) followed the pseudo-second-order equation. It was also found that the Langmuir model described the adsorption isotherm better than the Freundlich isotherm. The maximum removal capacity of the hydrogel composite for Pb(II) ions was 430 mg/g. Thus, the waste linear low-density polyethylene-g-poly (acrylic acid)-co-starch/organo-montmorillonite hydrogel composite could be a promising Pb(II) adsorbent.     

Synthesis of linear low-density polyethylene-g-poly(acrylic acid)-co-starch/organo-montmorillonite hydrogel composite as an adsorbent for removal of Pb(Ⅱ) from aqueous solutions

The purpose of this work is to remove Pb(II) from the aqueous solution using a type of hydrogel composite. A hydrogel composite consisting of waste linear low density polyethylene, acrylic acid, starch, and organo-montmorillonite was prepared through emulsion polymerization method. Fourier transform infrared spectroscopy(FTIR), Solid carbon nuclear magnetic resonance spectroscopy(CNMR)), silicon-29 nuclear magnetic resonance spectroscopy(Si NMR)), and X-ray diffraction spectroscope((XRD) were applied to characterize the hydrogel composite. The hydrogel composite was then employed as an adsorbent for the removal of Pb(II) from the aqueous solution. The Pb(II)-loaded hydrogel composite was characterized using Fourier transform infrared spectroscopy(FTIR)),scanning electron microscopy(SEM)), and X-ray photoelectron spectroscopy((XPS)). From XPS results, it was found that the carboxyl and hydroxyl groups of the hydrogel composite participated in the removal of Pb(II). Kinetic studies indicated that the adsorption of Pb(II)followed the pseudo-second-order equation. It was also found that the Langmuir model described the adsorption isotherm better than the Freundlich isotherm. The maximum removal capacity of the hydrogel composite for Pb(II) ions was 430 mg/g. Thus, the waste linear low-density polyethylene-g-poly(acrylic acid)-co-starch/organo-montmorillonite hydrogel composite could be a promising Pb(II) adsorbent.     

Pb(Ⅱ) biosorption using chitosan and chitosan derivatives beads: Equilibrium,ion exchange and mechanism studies

The study examined the adsorption of Pb(II) ions from aqueous solution onto chitosan, chitosan-GLA and chitosan-alginate beads. Several important parameters influencing the adsorption of Pb(II) ions such as initial pH, adsorbent dosage and different initial concentration of Pb(II) ions were evaluated. The mechanism involved during the adsorption process was explored based on ion exchange study and using spectroscopic techniques. The adsorption capacities obtained based on non-linear Langmuir isotherm for ch...     

Selective adsorption of silver ions from aqueous solution using polystyrene-supported trimercaptotriazine resin

Trimercaptotriazine-functionalized polystyrene chelating resin was prepared and employed for the adsorption of Ag(I) from aqueous solution. The adsorbent was characterized according to the following techniques: Fourier transform infrared spectroscopy, elemental analysis, scanning electron microscopy and the Brunauer-Emmet-Teller method. The effects of initial Ag(I) concentration, contact time, solution pH and coexisting ions on the adsorption capacity of Ag(I) were systematically investigated. The maximum adsorption capacity of Ag(I) was up to 187.1 mg/g resin at pH 0.0 and room temperature. The kinetic experiments indicated that the adsorption rate of Ag(I) onto the chelating resin was quite fast in the first 60 min and reached adsorption equilibrium after 360 min. The adsorption process can be well described by the pseudo second-order kinetic model and the equilibrium adsorption isotherm was closely fitted by the Langmuir model. Moreover, the chelating resin could selectively adsorb more Ag(I) ions than other heavy metal ions including: Cu(II), Zn(II), Ni(II), Pb(II) and Cr(III) during competitive adsorption in the binary metal species systems, which indicated that it was a highly selective adsorbent of Ag(I) from aqueous solution.     

水热炭对水土环境中重金属铅的固持

以纯米糠为前体制备水热炭,通过扫描电子显微镜、傅里叶红外光谱仪和元素分析仪等手段表征其物理化学性质;研究时间、p H、Pb~(2+)初始浓度等因素对其吸附Pb~(2+)的影响,以及其对污染土壤中Pb存在形态的影响。结果表明,纯米糠水热炭表面呈现多孔和网状结构,且含有丰富的表面含氧官能团,对溶液中Pb~(2+)有很强的吸附作用,p H=5时吸附效果最好,吸附24 h基本达到平衡。当Pb~(2+)初始浓度为80 mg/L,水热炭投加量为0.75 g/L时,水热炭对Pb~(2+)的吸附量可达72.44 mg/g。将水热炭投加到Pb污染土壤中,能有效降低弱酸提取态Pb含量,提高残渣态Pb含量,使Pb向更加稳定的状态转化。     

Kinetic adsorption of application of carbon nanotubes for Pb（II） removal from aqueous solution

The capability of carbon nanotubes (CNTs) to adsorb lead (Pb) in aqueous solution was investigated. Batch mode adsorption experiment was conducted to determine the effects of pH, agitation speed, CNTs dosage and contact time. The removal of Pb(II) was reach to maximum value 85% or 83% at pH 5 or 40 mg/L of CNTs, respectively. Higher correlation coefficients from Langmuir isotherm model indicates the strong adsorptions of Pb(II) on the surface of CNTs (adsorption capacity Xm = 102.04 mg/g). From this study, the results indicates that the highest percentage removal of Pb (96.03%) can be achieved at pH 5, 40 mg/L of CNTs, contact time 80 min, and agitation speed 50 r/min.     

Sequestration of toxic Pb（II） ions by chemically treated rubber （Hevea brasiliensis ） leaf powder

Rubber leaf powder (an agricultural waste) was treated with potassium permanganate followed by sodium carbonate and its performance in the removal of Pb(II) ions from aqueous solution was evaluated. The interactions between Pb(II) ions and functional groups on the adsorbent surface were confirmed by Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) coupled with X-ray energy dispersive spectroscopy (EDX). The effects of several important parameters which can affect adsorption capacity such as pH, adsorbent dosage, initial lead concentration and contact time were studied. The optimum pH range for lead adsorption was 4–5. Even at very low adsorbent dosage of 0.02 g, almost 100% of Pb(II) ions (23 mg/L) could be removed. The adsorption capacity was also dependent on lead concentration and contact time, and relatively a short period of time (60–90 min) was required to reach equilibrium. The equilibrium data were analyzed with Langmuir, Freundlich and Dubinin-Radushkevich isotherms. Based on Langmuir model, the maximum adsorption capacity of lead was 95.3 mg/g. Three kinetic models including pseudo first-order, pseudo second-order and Boyd were used to analyze the lead adsorption process, and the results showed that the pseudo second-order fitted well with correlation coefficients greater than 0.99.