The effects of 2,4-D herbicide and organophosphorus insecticides on growth, photosynthesis, and chlorophyll a synthesis of Chlamydomonas reinhardtii (mt +)

The effects of the herbicide (2,4-D) and six organophosphorus insecticides (Diazinon, Dimethoate, Fenitrothion, Malathion, Phenthoate and Quinalphos) on growth, photosynthesis and chlorophyll a synthesis of the fresh water green alga Chlamydomonas reinhardtii (mt +) were studied. At low concentrations (1 and 5 ppm), the herbicide and all six orgnophosphorus insecticides stimulated photosynthesis of the alga. The stimulating effects on algal growth and chlorophyll a synthesis were only observed in the presence of low concentration (1 ppm) of 2,4-D and Fenitrothion, Growth, photosynthesis and chlorophyll a synthesis of the alga were inhibited in the presence of high concentrations (10, 20 and 40 ppm) of the herbicide and all the six organophosphorus insecticides. Results also indicated that the toxicities of these organophosphorus insecticides on the tested alga were dependent on their chemical structures.     

Heavy metal speciation and mobility assessment of arid soils in the vicinity of Al Ain landfill, United Arab Emirates

Sixty-four surface soil samples taken in the vicinity of Al Ain landfill were analysed for cadmium, chromium, copper, nickel, lead and zinc by inductively coupled plasma spectroscopy. Extraction techniques were used to establish the association of the total concentrations of the six metals in the soil samples with their contents in the exchangeable, carbonate, iron/manganese oxides, and residual fractions. In the investigated soils, the recorded concentrations were as follows: 0.043 mg kg^-1 for cadmium, 19.1 mg kg^-1 for chromium, 53.3 mg kg^-1 for copper, 60 mg kg^-1 for nickel, 13.7 mg kg^-1 for lead, and 117 mg kg^-1 for zinc. Cadmium, chromium, nickel, lead and zinc concentrations in the investigated soil samples reflect the natural background values in shale, whereas copper is slightly enriched. I-geo (geoaccumulation index) values of the metals in the soils under study indicate that they are uncontaminated with cadmium, chromium, nickel, lead and zinc, but contaminated to moderately contaminated with copper. Heavy metal contents in the sediments were found to be significantly influenced by different physico-chemical parameters. The effect of these parameters can be arranged in the following order: clay fraction > carbonate fraction > silt fraction > organic matter fractions. A sequential extraction procedure showed that the total concentrations of the heavy metals are largely bound to the residual phase (retained 71.4% of cadmium, 77.8% of chromium, 75% of copper, 47% of nickel, 62.8% of lead, and 75.8% of zinc). A likely sequence of mobility in the investigated soils is as follows: chromium > lead > nickel > cadmium > zinc > copper.     

Trace metals in mussels from mariculture zones, Hong Kong

In 1997, concentrations of cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb) and nickel (Ni) were analysed in green-lipped mussels (Perna viridis) from three mariculture zones located in the north-east (Kat O), south (Lo Tik Wan) and to the west (Ma Wan) of Hong Kong. Spatial differences in the concentration of metals were found, chromium and copper were higher at Ma Wan and Lo Tik Wan compared to Kat O in the north-east. In contrast, the highest levels of lead (mean = 4.37 microg/g dry wt) were recorded at Kat O. There were no differences in the level of nickel between the study sites. A comparison of the metal concentrations in mussels with the results of a previous study seven years before, in 1990, showed a twofold increase in the mean levels of cadmium for all three sites. However, levels of the other metals in 1997 were lower by 12-32% for chromium, 32-39% for copper and 24-25% for nickel. The greatest reductions were recorded for lead: Kat O (39%), Ma Wan (51%) and Lo Tik Wan (75%). This may be related to the introduction of lead-free petrol in 1991. Despite the apparent reduction in some heavy metal bioaccumulation between 1990 and 1997, from a public health risk perspective, the data suggest a continued need for monitoring of heavy metals in mussels from mariculture zones.     

Municipal landfill leachate treatment for metal removal using water hyacinth in a floating aquatic system.

Experiments were carried out to investigate the ability of water hyacinth (Eichhornia crassipes) to remove five heavy metals (cadmium, chromium, copper, nickel, and lead) commonly found in leachate. All experiments were conducted in batch reactors in a greenhouse. It was found that living biomass of water hyacinth was a good accumulator for copper, chromium, and cadmium. The plants accumulated copper, chromium, and cadmium up to 0.96, 0.83, and 0.50%, respectively, of their dry root mass. However, lead and nickel were poorly accumulated in water hyacinth. Also, nonliving biomass of water hyacinth dry roots showed ability to accumulate all metals, except Cr(VI), which was added in anionic form. The highest total metal sorption by nonliving dry water hyacinth roots was found to take place at pH 6.4. The current research demonstrates the potential of using water hyacinth for the treatment of landfill leachate containing heavy metals.     

Selective recovery of chromium,copper, nickel,and zinc from an acid solution using an environmentally friendly process

Purpose  

Real electroplating effluents contain multiple metals. An important point related with the feasibility of the bioremediation process is linked with the strategy to recover selectively metals. In this work, a multimetal solution, obtained after microwave acid digestion of the ashes resulted from the incineration of Saccharomyces cerevisiae contaminated biomass, was used to recover selectively chromium, copper, nickel, and zinc.     

Enhanced removal of heavy metals in primary treatment using coagulation and flocculation.

The goal of this study was to determine the removal efficiencies of chromium, copper, lead, nickel, and zinc from raw wastewater by chemically enhanced primary treatment (CEPT) and to attain a total suspended solids removal goal of 80%. Operating parameters and chemical doses were optimized by bench-scale tests. Locally obtained raw wastewater samples were spiked with heavy metal solutions to obtain representative concentrations of metals in wastewater. Jar tests were conducted to compare the metals removal efficiencies of the chemical treatment options using ferric chloride, alum, and anionic polymer. The results obtained were compared with those from other studies. It was concluded that CEPT using ferric chloride and anionic polymer is more effective than CEPT using alum for metals removal. The CEPT dosing of 40 mg/L ferric chloride and 0.5 mg/L polymer enhanced heavy metals removal efficiencies by over 200% for chromium, copper, zinc, and nickel and 475% for lead, compared with traditional primary treatment. Efficient metals capture during CEPT can result in increased allowable headworks loadings or lower metal levels in the outfall.     

污泥果肥利用中重金属迁移特征研究

为了厦门城市污泥的安全利用,将石渭头污水处理厂污泥经过好氧堆肥后施用于柚子树,对重金属元素在土壤、树叶及果肉中的迁移特征进行了研究。结果表明：Cd在土壤中的富集能力强;重金属元素从土壤向树叶迁移累积能力比向果肉的大得多,污泥肥料不能用于叶类食用植物的施用;Cr向树叶、Ni向果肉的迁移累积能力强;泥肥的施用加重了土壤中Cd的污染,提高了Cr向树叶、Ni向果肉的迁移能力;污泥果肥利用需降低Ni的浓度,对污泥中含量较高的Cu、Zn、Ni、Cr和Cd需进行跟踪检测。     

Effects of heavy metals on sea urchin embryo development. Part 2. Interactive toxic effects of heavy metals in synthetic mine effluents

Interactive toxic effects between heavy metals were investigated using a sea urchin (Anthocidaris crassispina) bioassay. An effluent from an abandoned mine showed significant inhibitory effects on embryo development as well as producing specific malformations. The effects on the embryos were reproduced by synthetic polluted seawater consisting of eight metals (manganese, lead, cadmium, nickel, zinc, chromium, iron, and copper) at the concentrations detected in the mine effluent. This indicated that the heavy metals were responsible for the effects observed. Five heavy metals were ranked in decreasing order of toxicity as follows: Cu>Zn>Pb>Fe>Mn. Among these, zinc and manganese could cause malformation of the embryos. From bioassay results using 27 combinations of heavy metals, 16 combinations including zinc could produce specific malformations, such as radialized, exo-gastrulal, and spaceship Apollo-like gastrulal embryos. Zinc was one of the elements responsible for causing malformations and its effects were intensified by the presence of the other metals, such as manganese, lead, iron, and copper.     

Plagiochasma appendiculatum as a biotest for water quality assessment

A thalloid pathogen-free liverwort, Plagiochasma appendiculatum, was exposed to different pollution stresses, especially heavy metals, synthesized in the laboratory, to simulate pollutants reported to occur in industrial areas. The plant was found to be sensitive to mercury and copper. Thallus injury and chlorophyll content showed effects with increasing exposure to metals. In contrast, the plant was found to be resistant to lead, zinc and chromium. The plant showed growth in some concentrations of these metals, hence suggesting their accumulation. In this paper, the possible use of Plagiochasma in the assessment of water quality, especially for heavy metals, is discussed, with special reference to thallus deterioration as a simple biomonitoring parameter.     

Effects of 2,4-D, glyphosate and paraquat on growth, photosynthesis and chlorophyll-a synthesis of Scenedesmus quadricauda Berb 614

The effects of 2,4-D, glyphosate and paraquat on growth, photosynthesis and chlorophyll-a synthesis by a freshwater green alga, Scenedesmus quadricauda Berb 614, were determined. These herbicides are the most often used in Hong Kong. Within the concentration range 0.02-200 mg/l, paraquat was more toxic than glyphosate and 2,4-D to the growth, photosynthesis and chlorophyll-a synthesis. The presence of 0.02, 0.2 or 2 mg/l of 2,4-D was not toxic to the alga. Algal growth, photosynthesis and chlorophyll-a synthesis were stimulated by the presence of low concentrations (0.02 or 0.2 and 0.02 mg/l, respectively) of 2,4-D and glyphosate. The presence of 0.02 or 0.2 mg/l of paraquat, 2 mg/l of glyphosate or 20 mg/l of 2,4-D was significantly inhibitory to the three test parameters, whereas the presence of 2 or more mg/l of paraquat, 20 or more mg/l of glyphosate or 200 mg/l of 2,4-D completely inhibited algal growth, photosynthesis and chlorophyll-a synthesis. The use of the alga as a bio-indicator of herbicide contamination in freshwater environment was discussed.     

Isolation and characterization of Bacillus cereus IST105 from electroplating effluent for detoxification of hexavalent chromium

Purpose

Electroplating industries are the main sources of heavy metals, chromium, nickel, lead, zinc, cadmium and copper. The highest concentrations of chromium (VI) in the effluent cause a direct hazards to human and animals. Therefore, there is a need of an effective and affordable biotechnological solution for removal of chromium from electroplating effluent.

Methods

Bacterial strains were isolated from electroplating effluent to find out higher tolerant isolate against chromate. The isolate was identified by 16S rDNA sequence analysis. Absorbed chromium level of bacterium was determined by inductively coupled plasma-atomic emission spectrometer (ICP-AES), atomic absorption spectrophotometer (AAS), scanning electron microscope (SEM), transmission electron microscope (TEM) and energy dispersive X-ray analysis (EDX). Removal of metals by bacterium from the electroplating effluent eventually led to the detoxification of effluent confirmed by MTT assay. Conformational changes of functional groups of bacterial cell surface were studied through Fourier transform infrared spectroscopy.

Results

The chromate tolerant isolate was identified as Bacillus cereus. Bacterium has potency to remove more than 75% of chromium as measured by ICP-AES and AAS. The study indicated the accumulation of chromium (VI) on bacterial cell surface which was confirmed by the SEM-EDX and TEM analysis. The biosorption of metals from the electroplating effluent eventually led to the detoxification of effluent. The increased survivability of Huh7 cells cultured with treated effluent also confirmed the detoxification as examined by MTT assay.

Conclusion

Isolated strain B. cereus was able to remove and detoxify chromium (VI). It would be an efficient tool of the biotechnological approach in mitigating the heavy metal pollutants.     

Effects of sintering atmosphere on cement clinkers produced from chromium-bearing sludge

The purpose of this study was to investigate the effects of sintering atmosphere (oxidizing and reducing) on the polymorphs of dicalcium silicates (Ca2SiO4, C2S) and on the chromium leaching of the belite-rich clinkers made from a chromium-bearing sludge. This sludge was generated in an electroplating factory, and in addition to chromium, it contained nickel, copper and zinc. In the clinker production, air was used as the oxidizing atmosphere, and carbon monoxide, which was produced by burning graphite with an insufficient amount of oxygen, was employed as the reducing atmosphere. Dicalcium silicates were substantially formed under both kinds of sintering atmosphere, but there was some nonhydraulic gamma-C2S in the clinkers produced under the oxidizing atmosphere. In addition, the amount of gamma-C2S decreased with the chromium-bearing sludge addition, whereas that of beta-C2S increased. The clinkers produced under the reducing atmosphere had less residual chromium, a finding that shows that more chromium was evaporated. However, the reducing atmosphere can decrease the proportion of hexavalent chromium (Cr(VI)) in the resulting clinkers. For other heavy metals, the residual amounts of nickel and copper generally increased with the sludge addition, but zinc was absent in most of the clinkers produced under the reducing atmosphere. This implies that the evaporation of zinc is much more significant than that of the other heavy metals under a reducing atmosphere. In the leaching tests, the concentrations of nickel, copper, and zinc were below the detection limits in all the leachates. In terms of chromium, the total leaching concentration was highly related to Cr(VI). The clinkers produced under the oxidizing atmosphere had high leaching concentrations of chromium, and thus failed to meet the regulatory limit. In contrast, the reducing atmosphere was effective in decreasing the chromium leaching, and it therefore makes the resulting cement clinkers more environmentally sound.     

Seasonal and local variation of Cr, Ni and Co concentrations in Ulva rigida C. Agardh and Enteromorpha linza (Linnaeus) from Thermaikos Gulf, Greece

Cobalt, nickel and chromium concentrations were determined in Enteromorpha linza and Ulva rigida in seawater and sediment after seasonal collection from Thermaikos Gulf, Greece. Industrial waste and sewage is poured into this Gulf. The relative abundance of metals in the seaweeds and seawater decreased in the order Ni > Cr > Co, whereas in the sediment the order was Cr > Ni > Co. The two seaweeds bioaccumulated similar metal concentrations. The seasonal variation of metals in the two algae was not significant, but seemed to depend on the growth dynamics, the age of the tissue, the metal concentrations in the environment and the abiotic factors (such as salinity and temperature). Only Cr concentrations in E. linza showed significant local variation which depended on the area into which the industrial and domestic wastes were discharged and on their transport by sea currents. Nickel and chromium concentrations in U. rigida and Cr concentrations in E. linza displayed significant positive correlation with their concentrations in the seawater. Concentrations of the three metals in the seaweeds and seawater of Thermaikos Gulf generally exceeded the 'background' levels.     

Effects of heavy metals on sea urchin embryo development. 1. Tracing the cause by the effects

The toxicity of the polluted waters originating from a disused lead mine was evaluated using both sea urchin bioassays and heavy metal analysis. Samples from three polluted waters (a seawater and two freshwaters) were collected from the mine area and one seawater sample was taken from a non-contaminated reference site. The test waters contained higher concentrations of heavy metals such as manganese, lead, cadmium, zinc, chromium, nickel, iron, and copper than did ambient seawater. The three test waters had inhibitory effects, in a dose-dependent manner, on the first cleavage of sea urchin embryos and on pluteus formation during the development. Some malformations, such as a radialized pluteus, exo-gastrula, and spaceship Apollo-like embryos were induced by the test waters without dilution. Zinc alone also induced the same anomaly. Zinc in the test seawater was ascertained as one of the metals that caused the anomalies, but not all of the toxicity was caused by zinc. It was speculated that interactive effects, involving zinc and possibly manganese and nickel, were occurring.     

Hydrogen sulfide ameliorates lead-induced morphological, photosynthetic, oxidative damages and biochemical changes in cotton

Poisonous lead (Pb), among heavy metals, is a potential pollutant that readily accumulates in soils and thus adversely affects physiological processes in plants. We have evaluated how exogenous H₂S affects cotton plant physiological attributes and Pb uptake under Pb stress thereby understanding the role of H₂S in physiological processes in plants. Two concentrations (0 and 200 μM) of H₂S donor sodium hydrosulfide (NaHS) were experimented on cotton plants under Pb stress (0, 50, and 100 μM). Results have shown that Pb stress decreased plant growth, chlorophyll contents, SPAD value, photosynthesis, antioxidant activity. On the other hand, Pb stress increased the level of malondialdehyde (MDA), electrolyte leakage (EL), and production of H₂O₂ and uptake of Pb contents in all three parts of plant, viz. root, stem, and leaf. Application of H₂S slightly increased plant growth, chlorophyll contents, SPAD value, photosynthesis, and antioxidant activity as compared to control. Hydrogen sulfide supply alleviated the toxic effects of lead on plant growth, chlorophyll contents, SPAD value, photosynthesis, and antioxidant activity in cotton plants. Hydrogen sulfide also reduced MDA, EL, and production of H₂O₂ and endogenous Pb levels in the three mentioned plant parts. On the basis of our results, we conclude that H₂S has promotive effects which could improve plant survival under Pb stress.     

利用芦竹修复重金属污染湿地的研究

研究了芦竹(Arundodonaxlinn)对Cu2+、Ni2+、Cr6+重金属污染湿地的响应和对该污染湿地的影响。实验结果表明,芦竹对这3种重金属离子有一定的耐受性,并有不同程度的吸收,Cu2+、Ni2+和Cr6+去除率分别为63.8%,42.3%和34.4%。芦竹在100mg/kg浓度的Cu2+、Ni2+污染湿地中生长正常,在低浓度(55mg/kg)Cr6+污染中能存活,但生长速度较慢。在100mg/kg浓度Cr6+污染湿地中,出现急性中毒现象,半月后致死。在重金属污染环境中,芦竹普遍出现失绿现象,但除高浓度Cr6+(100mg/kg)以外,都能正常存活,表现出较强的适应性。     

Occurrences and inventories of heavy metals and brominated flame retardants in wastes from printed circuit board production

Pollutants including heavy metals and brominated flame retardant were detected in 10 types of production wastes from a typical printed circuit board manufacturing plant, and their inventories were estimated. Rinsing water from etching process had the highest concentrations of copper (665.51 mg/L), lead (1.02 mg/L), nickel (3.60 mg/L), chromium (0.97 mg/L), and tin (1.79 mg/L). Powdered solid waste (SW) from the cut lamination process contained the highest tetrabromobisphenol-A (TBBPA) levels (49.86 mg/kg). Polybrominated diphenyl ethers (PBDEs) were absent in this plant, in agreement with the international regulations of PBDE phase out. The pollutant inventories in the wastes exhibited in the order of copper >?>?zinc?>?tin?≈?nickel?>?lead?>?chromium >?>?TBBPA. The potential environmental impact of pollutants in SW during production and disposal were further investigated. A high partitioning of pollutant concentration between the total suspended particle and SW (?0.10?K _TS?相似文献   

Mosses as biomonitors of atmospheric heavy metal deposition: Spatial patterns and temporal trends in Europe

In recent decades, mosses have been used successfully as biomonitors of atmospheric deposition of heavy metals. Since 1990, the European moss survey has been repeated at five-yearly intervals. Although spatial patterns were metal-specific, in 2005 the lowest concentrations of metals in mosses were generally found in Scandinavia, the Baltic States and northern parts of the UK; the highest concentrations were generally found in Belgium and south-eastern Europe. The recent decline in emission and subsequent deposition of heavy metals across Europe has resulted in a decrease in the heavy metal concentration in mosses for the majority of metals. Since 1990, the concentration in mosses has declined the most for arsenic, cadmium, iron, lead and vanadium (52-72%), followed by copper, nickel and zinc (20-30%), with no significant reduction being observed for mercury (12% since 1995) and chromium (2%). However, temporal trends were country-specific with sometimes increases being found.     

Effect of mixed cadmium,copper, nickel and zinc at different pHs upon alfalfa growth and heavy metal uptake

Alfalfa plants were grown in soil-pots contaminated with a mixture of Cd(II), Cu(II), Ni(II), and Zn(II), (at 50 mg/kg each) at pHs of 4.5, 5.8, and 7.1. The plants were fertilized using a nutrient solution, which was adjusted appropriately to the same pH. Plants in the control treatment were grown in the absence of the heavy metals mixture. The growth of the control plants was the same at the three pHs studied and the heavy metal stressed plants also showed similar behavior at each pHs. There were statistically significant differences (P<0.05) between the shoot length of the control treatment plants and the length of plants grown in the presence of the heavy metal mixture. Under the effects of the heavy metal mixture, nickel was the most accumulated element in the shoot tissue, with 437, 333, and 308 ppm at pH 7.1, 5.8, and 4.5, respectively. Cadmium was found to be second in accumulated concentrations with 202 ppm, 124 ppm, and 132 ppm at pH 7.1, 5.8, and 4.5, respectively, while zinc was third, followed by copper. The maximum relative uptakes (element in plant/element in soil-water-solution) were found to be 26 times for nickel, 23 times for cadmium, 12 times for zinc. and 6 times for copper. We considered these relations as indicative of the ability of alfalfa plants to take up elements from a soil matrix contaminated with a mixture of cadmium, copper, nickel, and zinc.     

Change of PCBs and forms of heavy metals in sewage sludge during thermophilic anaerobic digestion

Determination of seven congeners of PCBs was carried out for sewage sludge before, during and after thermophilic digestion. The overall content of heavy metals (Zn, Cu, Ni, Cd, Pb, Cr) in sludge before and after digestion was determined. Moreover the concentration of heavy metals in particular chemical fractions of the sludge was analyzed. After the thermophilic digestion total concentration of seven PCBs was reduced by 47%, which suggests that thermophilic digestion affects PCB reduction positively. On the 10th d of the process, concentration of lower chlorinated PCBs increased, whereas those of higher chlorinated PCBs decreased. The thermophilic digestion process showed no accumulation of the studied heavy metals in the mobile fractions (exchangeable and carbonate) of the stabilized sewage sludge, except for nickel. The highest increase in zinc, copper, cadmium, and chromium concentration was observed in the organic-sulfide fraction, whereas the highest increase in lead was found in the residual fraction of the sludge. In case of nickel both fractions of organic-sulfide and exchangeable-carbonate fractions were enriched.