Environmental impacts caused by cemeteries and crematoria,new funeral technologies,and preferences of the Northeastern and Southern Brazilian population as for the funeral process

Cemeteries and crematoria are the main funeral ways used in the world nowadays. It is a little-studied segment in the present days, mainly as for the possible environmental impacts in the environment, such as those derived from dental amalgam, prostheses, and dioxins, among other. This article aimed to identify the environmental impacts caused by cemeteries and crematoria and to point out new trends in funeral processes such as freeze-drying and alkaline hydrolysis. The study is justified due to the large part of the Brazilian population that do not know the environmental impacts caused by cemeteries and crematoria, as well as to bring information about the new processes. For that, a research was carried out with 400 people. The main results show that among all the funeral processes, the new freeze-drying process was opted by 33% of the sample. We also identified that the main reasons for choosing the funeral process were less environmental impact (28%), no after-death expenses (grave payment) (16.1%), and the possibility of putting away or throwing away the remains wherever you want (14.9%). Finally, new funeral processes were well accepted by the Brazilian population—those who were interviewed—due to their benefits.     

Chemical industry reduces emissions--from production to the consumer

Responsible care has always been an important issue at a chemical industry like Bayer. In recent years, the company has made extensive efforts to further improve its products and processes with regard to environmental protection and safety. In this contribution, a number of examples will highlight recent achievements of Bayer in the field of low or no emission processes and products. Examples are given in the fields of production-integrated environmental protection measures (new and improved processes e.g., for the production of adipic acid), the application of integrated environmental protection measures (2K-PUR water-borne coatings for cars) and product-integrated environmental protection measures (targeted application of insecticides/Attract and Kill) as a new low emission method to control insect pests.     

A Comparative Assessment of Flue Gas Treatment Processes Part II—Environmental and Cost Comparison

The developmental status, projected costs, and environmental effects of 14 flue gas treatment processes are compared on a common basis in two consecutive issues of JAPCA. Part I summarized the background and study basis and Part II compares environmental impact and relative costs. Each process is assumed to be associated with a grass roots installation that includes a modern 800 MW power plant burning Illinois No. 6 coal. Also considered is the effectiveness of these processes to control particulate matter, NO_x, trace inorganics, and polyorganic matter.

The processes are divided into those operating once-through (Limestone, Lime, Limestone and Lime, Dual-Alkali), and with regeneration (Magnesia, Wellman-Lord, Citrate, Aqueous Carbonate, IFP-Catalytic Inc., Copper-Dry Bed, and Carbon-Dry Bed). Also analyzed are NO_x control processes that are compatible with scrubbers or dry processes, and include the Exxon Thermal DeNO_x, Ozone NO Oxidation, and Copper and Carbon-Dry Bed.     

A physical explanation of the lognormality of pollutant concentrations

Investigators in different environmental fields have reported that the concentrations of various measured substances have frequency distributions that are lognormal, or nearly so. That is, when the logarithms of the observed concentrations are plotted as a frequency distribution, the resulting distribution is approximately normal, or Gaussian, over much of the observed range. Examples include radionuclides in soil, pollutants in ambient air, indoor air quality, trace metals in streams, metals in biological tissue, calcium in human remains. The ubiquity of the lognormal distribution in environmental processes is surprising and has not been adequately explained, since common processes in nature (for example, computation of the mean and the analysis of error) usually give rise to distributions that are normal rather than lognormal. This paper takes the first step toward explaining why lognormal distributions can arise naturally from certain physical processes that are analogous to those found in the environment. In this paper, these processes are treated mathematically, and the results are illustrated in a laboratory beaker experiment that is simulated on the computer.     

Coupled effects of solution chemistry and hydrodynamics on the mobility and transport of quantum dot nanomaterials in the vadose zone

To investigate the coupled effects of solution chemistry and hydrodynamics on the mobility of quantum dot (QD) nanoparticles in the vadose zone, laboratory scale transport experiments involving single and/or sequential infiltrations of QDs in unsaturated and saturated porous media, and computations of total interaction and capillary potential energies were performed. As ionic strength increased, QD retention in the unsaturated porous media increased; however, this retention was significantly suppressed in the presence of a non-ionic surfactant in the infiltration suspensions as indicated by surfactant enhanced transport of QDs. In the vadose zone, the non-ionic surfactant limited the formation of QD aggregates, enhanced QD mobility and transport, and lowered the solution surface tension, which resulted in a decrease in capillary forces that not only led to a reduction in the removal of QDs, but also impacted the vadose zone flow processes. When chemical transport conditions were favorable (ionic strength of 5 × 10(-4)M and 5 × 10(-3)M, or ionic strengths of 5 × 10(-2)M and 0.5M with surfactant), the dominating phenomena controlling the mobility and transport of QDs in the vadose zone were meso-scale processes, where infiltration by preferential flow results in the rapid transport of QDs. When chemical transport conditions were unfavorable (ionic strength of 5 × 10(-2)M and 0.5M) the dominating phenomena controlling the mobility and transport of QDs in the vadose zone were pore-scale processes governed by gas-water interfaces (GWI) that impact the mobility of QDs. The addition of surfactant enhanced the transport of QDs both in favorable and unfavorable chemical transport conditions. The mobility and retention of QDs was controlled by interaction and capillary forces, with the latter being the most influential. GWI were found to be the dominant mechanism and site for QD removal compared with solid-water interfaces (SWI) and pore straining. Additionally, ripening phenomena were demonstrated to enhance QDs removal or retention in porous media and to be attenuated by the presence of surfactant.     

A Comparative Assessment of Flue Gas Treatment Processes Part I—Status and Design Basis

The developmental status, projected costs, and environmental effects of 14 flue gas treatment processes are compared on a common basis in two consecutive issues of JAPCA. Part I summarizes the background and study basis and Part II compares environmental impact and relative costs. Each process is assumed to be associated with a grass roots installation that includes a modern 800 MW power plant burning Illinois No. 6 coal. Also considered is the effectiveness of these processes to control particulate matter, NO _x , trace inorganics, and polyorganic matter.

The processes are divided into those operating once-through (Limestone, Lime, Limestone and Lime, Dual-Alkali), and with regeneration (Magnesia, Wellman-Lord, Citrate, Aqueous Carbonate, IFP-Catalytic Inc., Copper-Dry Bed, and Carbon-Dry Bed). Also analyzed are NO _x control processes that are compatible with scrubbers or dry processes, and include the Exxon Thermal DeNO _x , Ozone NO Oxidation, and Copper and Carbon-Dry Bed.     

A Physical Explanation of the Lognormality of Pollutant Concentrations

Investigators In different environmental fields have reported that the concentrations of various measured substances have frequency distributions that are lognormal, or nearly so. That is, when the logarithms of the observed concentrations are plotted as a frequency distribution, the resulting distribution is approximately normal, or Gaussian, over much of the observed range. Examples include radionuclides in soil, pollutants in ambient air, Indoor air quality, trace metals In streams, metals in biological tissue, calcium In human remains. The ubiquity of the lognormal distribution in environmental processes is surprising and has not been adequately explained, since common processes in nature (for example, computation of the mean and the analysis of error) usually give rise to distributions that are normal rather than lognormal. This paper takes the first step toward explaining why lognormal distributions can arise naturally from certain physical processes that are analogous to those found in the environment. In this paper, these processes are treated mathematically, and the results are illustrated in a laboratory beaker experiment that Is simulated on the computer.     

Physiological and Biochemical Effects of Atmospheric Oxidants on Plants

Photochemically produced oxidants in the atmosphere cause injury to plants primarily through inhibition of basic metabolic processes. Plants vary in their response to the oxidants and this variation must be dependent in part on the variation in metabolic activity with age or environmental conditions for growth, to a large degree not understood. Data are presented in this paper to show: (1) The changes in permeability of leaf tissue to exogenous substrate and in catabolic utilization of this substrate after exposure of plants to ozone but before visible symptoms appear; (2) The change in leaf carbohydrates as a result of exposure to ozone; (3) The protective effect of red light (700 mμ) during exposure of bean plants to peroxyacetyl nitrate (PAN); (4) The correlation of sulfhydryl (SH) content in bean leaf tissue with age of plants and light regime; and (5) Effect of light regime and age of plants on incorporation of C¹⁴ from C¹⁴-PAN by bean leaf tissue.     

Regional variation in surface properties of Norway spruce and scots pine needles in relation to forest decline

Measurements of leaf wettability (contact angle), amounts of epicuticular wax and of surface dust are reported for Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L) Karst) trees growing at 12 sites in Europe from SW Germany to NE Scotland. At each site, three year classes (current year, 1 and 2-year-old) of needles were sampled from the mid-crown of up to 12 trees. Trees were selected at random from two strata, those showing visible decline symptoms (i.e. loss of needles or discoloration) and those apparently healthy. Needles for analysis were taken from apparently healthy (green) shoots in both cases. There were no significant differences between 'declining' and 'healthy' trees within sites, suggesting that leaf surface properties reflect environmental exposure rather than plant response. There were significant differences between sites, particularly for Norway spruce, which may be related to environmental factors including air pollution. Contact angles were consistently smaller at low-altitude sites in Britain and The Netherlands than at high-altitude sites in Germany where forests show decline symptoms. Leaf wettability decreased (contact angles increased) with wax amount and increased with dust amount. Leaf surface properties integrate environmental influences over long periods, and may be useful in identifying sites 'at risk' of developing decline symptoms, but causal relationships cannot be deduced without further direct experimentation.     

TXRF analysis of soils and sediments to assess environmental contamination

Total reflection x-ray fluorescence spectroscopy (TXRF) is proposed for the elemental chemical analysis of crustal environmental samples, such as sediments and soils. A comparative study of TXRF with respect to flame atomic absorption spectroscopy and inductively coupled plasma optical emission spectroscopy was performed. Microwave acid digestion and suspension preparation methods are evaluated. A good agreement was found among the results obtained with different spectroscopic techniques and sample preparation methods for Cr, Mn, Fe, Ni, Cu, and Zn. We demonstrated that TXRF is suitable for the assessment of environmental contamination phenomena, even if the errors for Pb, As, V, and Ba are ingent.     

Description of sorbing tracers transport in fractured media using the lattice model approach

The transport of contaminants in fractured media is a complex phenomenon with a great environmental impact. It has been described with several models, most of them based on complex partial differential equations, that are difficult to apply when equilibrium and nonequilibrium dynamics are considered in complex boundaries. With the aim of overcoming this limitation, a combination of two lattice Bathnagar, Gross and Krook (BGK) models, derived from the lattice Boltzmann model, is proposed in this paper. The fractured medium is assumed to be a single fissure in a porous rock matrix. The proposed approach permits us to deal with two processes with different length scales: advection-dispersion in the fissure and diffusion within the rock matrix. In addition to the mentioned phenomena, sorption reactions are also considered. The combined model has been tested using the experimental breakthrough curves obtained by Garnier et al. (Garnier, J.M., Crampon, N., Préaux, C., Porel, G., Vreulx, M., 1985. Tra?age par 13C, 2H, I- et uranine dans la nappe de la craie sénonienne en écoulement radial convergent (Béthune, France). J. Hidrol. 78, 379-392.) giving acceptable results. A study on the influence of the lattice BGK models parameters controlling sorption and matrix diffusion on the breakthrough curves shape is included.     

Degradation of reactive dyes I. A comparative study of ozonation, enzymatic and photochemical processes

The environmental problems associated with textile activities are represented mainly by the extensive use of organic dyes. A great number of these compounds are recalcitrant and shown carcinogenic or mutagenic character. In this work three processes were studied for degradation of an anthraquinone dye (C.I. reactive blue-19). The ozonation process leads to complete decolorization with a very short reaction time; however, effective mineralization of the dye was not observed. The enzymatic process promotes quick decolorization of the dye; nevertheless, maximum decolorization degrees of about 30% are insignificant in relation to the decolorization degree achieved by the other processes. The best results were found for the photocatalytical process. The use of ZnO or TiO2 as photocatalysts, permits total decolorization and mineralization of the dye with reaction times of about 60 min.     

Fate of hydrophobic organic pollutants in the aquatic environment: a review

The fate of hydrophobic organic pollutants in the aquatic environment is controlled by a variety of physical, chemical and biological processes. Some of the most important are physical transport, chemical and biological transformations, and distribution of these compounds between the various environmental compartments (atmosphere, water, sediments and biota). The major biogeochemical processes that control the fate of hydrophobic organic compounds in the aquatic environment are reviewed. These processes include evaporation, solubilization, interaction with dissolved organic matter, sediment-water partitioning, bioaccumulation and degradation. Physico-chemical parameters used to predict the aquatic fate of such compounds are also discussed.     

The role of mechanical and biological treatment in reducing methane emissions from landfill disposal of municipal solid waste in the United Kingdom

In Europe, the European Union Landfill Directive aims to reduce the negative environmental impacts of landfilling. This is mainly to be achieved by reducing the quantity of organic matter deposited, through measures such as the separate collection and recycling of the organic waste stream or pretreatment of residual wastes before landfilling. Other than incineration or other thermal processes, mechanical biological treatment is playing an increasingly important role. This study was conducted to seek the benefits of municipal solid waste (MSW) pretreatment, as well as the differences in methane production from the landfilling of untreated and mechanically/biologically treated (MBT) MSW using GasSim simulation. Results demonstrated that methane production rates vary significantly among waste fractions. Those that contribute most to methane generation (organic material and potentially reusable or recyclable material) could be targeted and treated before landfilling. The statistic relationship from the first phase of the study indicated that to match the increasingly stringent landfill waste organic content allowance, local councils should prioritize the reduction/sorting of certain targeted fractions, such as paper, card, green waste, and other putrescibles from MSW. Moreover, mechanical treatment alone produces organic-rich waste called mechanically sorted organic residues (MSORs), which can be viewed as an organic content concentration process. Mechanically and biologically pretreated waste, on the other hand, differs significantly from untreated MSW and MSORs. This work demonstrated that if efficient mechanical-biological treatment is used, considerable reductions in biological activity, landfill gas production, and energy content/total organic carbon could be achieved. Using GasSim, reductions in methane production of >74% have been simulated if a 90% organic content reduction can be achieved during biological treatment on MSORs. A 50-60% organic content reduction by following biological treatment can turn MSOR properties only into normal MSW equivalent though considerably less volume.     

The sustainable management and protection of forests: analysis of the current position globally

The loss of forest area globally due to change of land use, the importance of forests in the conservation of biodiversity and in carbon and other biogeochemical cycles, together with the threat to forests from pollution and from the impacts of climate change, place forestry policy and practice at the center of global environmental and sustainability strategy. Forests provide important economic, environmental, social, and cultural benefits, so that in forestry, as in other areas of environmental policy and management, there are tensions between economic development and environmental protection. In this article we review the current information on global forest cover and condition, examine the international processes that relate to forest protection and to sustainable forest management, and look at the main forest certification schemes. We consider the link between the international processes and certification schemes and also their combined effectiveness. We conclude that in some regions of the world neither mechanism is achieving forest protection, while in others local or regional implementation is occurring and is having a significant impact. Choice of certification scheme and implementation of management standards are often influenced by a consideration of the associated costs, and there are some major issues over the monitoring of agreed actions and of the criteria and indicators of sustainability. There are currently a number of initiatives seeking to improve the operation of the international forestry framework (e.g., The Montreal Process, the Ministerial Convention of the Protection of Forests in Europe and European Union actions in Europe, the African Timber Organisation and International Tropical Timber Organisation initiative for African tropical forest, and the development of a worldwide voluntary agreement on forestry in the United Nations Forum on Forests). We suggest that there is a need to improve the connections between scientific understanding, policy development, and forestry practice, and also the cooperation between the various international initiatives and processes, so that the international framework is more effective and its influence is extended geographically.     

Review articles: Tankships in the marine environment

This report gives an inside view on discussions held at the headquarters of the International Maritime Organization, the United Nations agency concerned with maritime safety and the prevention of pollution from ships. Marine environmental protection regulations and their historical development are presented and discussed. The regulative measures that have been taken under the responsibility of this organization during the last decades to reduce accidental and operational discharge from tankships have achieved success although the marine environment is still suffering. Those standards which will come into force will further reduce the risks of accidental pollution. The report summarizes aspects beyond issues of environmental science which have to be analysed in order to reduce the impact of tankships on the marine environment. The report ends with the thesis that safer ships and improved occupational conditions on board are prerequisites for cleaner seas.     

Modelling the atmospheric fate and seasonality of polycyclic aromatic hydrocarbons in the UK

This paper presents the results from an exercise in atmospheric contaminant fate modelling, which had three main objectives: (1) to investigate the balance between estimated national atmospheric emissions of six selected PAHs and observed ambient measurements for the UK, as a means of testing the current emission estimates; (2) to investigate the potential influence of seasonally dependent environmental fate processes on the observed seasonality of air concentrations; and (3) after undertaking the first two objectives, to make inferences about the likely magnitude of seasonal differences in sources. When addressing objective 1 with annually averaged emissions data, it appeared that the UK PAH atmospheric emissions inventory was reasonably reliable for fluorene, fluoranthene, pyrene, benzo[a]pyrene and benzo[ghi]perylene--but not so for phenanthrene. However, more detailed analysis of the seasonality in environmental processes which may influence ambient levels, showed that the directions and/or magnitudes of the predicted seasonality did not coincide with field observations. This indicates either that our understanding of the environmental fate and behaviour of PAHs is still limited, and/or that there are uncertainties in the emissions inventories. It is suggested that better quantification of PAH sources is needed. For 3- and 4-ringed compounds, this should focus on those sources which increase with temperature, such as volatilisation from soil, water, vegetation and urban surfaces, and possible microbially-mediated formation mechanisms. The study also suggests that the contributions of inefficient, diffusive combustion processes (e.g. domestic coal/wood burning) may be underestimated as a source of the toxicologically significant higher molecular weight species in the winter. It is concluded that many signatory countries to the UNECE POPs protocol (which requires them to reduce national PAH emissions to 1990 levels) will experience difficulties in demonstrating compliance, because source inventories for 1990 and contemporary situations are clearly subject to major uncertainties.