Inferences about point source loadings from upstream/downstream river monitoring data

Areas of Concern such as the Niagara and Detroit Rivers contain a myriad of point and non-point sources. These are difficult and expensive to monitor and often present unique analytical problems and so are subject to analytical error. The Niagara River Toxics Committee (NRTC) and the Upper Great Lakes Connecting Channels Study Modeling Committee designed programs to indirectly monitor these sources by upstream/downstream sampling at the head and mouth of the rivers. These two studies are compared and the data analysis problems that were encountered are discussed. Upstream/downstream samples were paired to obtain differential loadings wherever possible, but when some results were reported as below the detection limit, a maximum likelihood estimate was used. The resulting differential loading, adjusted for non-point sources, is the total point source load to the river minus any losses due to volatilization, settling or degradation.     

Performance evaluation of a full-scale natural treatment system for nonpoint source and point source pollution removal

This study presents a full-scale performance of a natural treatment system (NTS) facility in Taiwan with nearly 2 years of observations. The study site, composed of several treatment ponds in series, was designed primarily to reduce polluted stormwater runoff from tea gardens and partially to untreated domestic wastewater from nearby villages. Thus, both nonpoint source and point source pollution are treated in this system. From 28 field samplings in 2006-2007, the NTS site shows satisfactory treatment performance and the effluent water quality is significantly improved. Seven of the 28 sampling events are storm events (nonpoint source pollution) and the remainder are from regular monitoring (point source pollution). The average volume of influent and effluent is 533 CMD and 196 CMD, respectively. In order to determine the removal efficiency, several assessment measures are employed in an attempt to obtain unbiased conclusions. They are removal rate (RR), efficiency rate (ER), summation of loads (SOL), flux rate (FR), and effluent probability method (EPM). The average percent removal efficiency of NH(3)-N is 53.5-75.2% and of TP is 59.0-84.7%, in which the highest result is calculated by SOL method and the lowest rate is obtained from RR. In FR evaluation, larger treatment capacity for NH(3)-N than for TP is provided in the site and the average FR is respectively 0.230 g/m(2) day and 0.017 g/m(2) day. Of the methods examined, EPM is the only method capable of illustrating data distribution. Finally, recommendations on the usefulness of these measures are summarized to facilitate the understandings of NTS performance evaluations.     

Modeling of land use and reservoir effects on nonpoint source pollution in a highly agricultural basin

Nonpoint source (NPS) pollution is tightly linked to land use activities that determine the sources and magnitudes of pollutant loadings to stream water. The pollutant loads may also be alleviated within reservoirs because of the physical interception resulting from changed hydrological regimes and other biochemical processes. It is important but challenging to assess the NPS pollution processes with human effects due to the measurement limitations. The objective of this study is to evaluate the effects of human activities such as land uses and reservoir operation on the hydrological and NPS pollution processes in a highly agricultural area-the Iowa River Basin-using the Soil and Water Assessment Tool (SWAT). The evaluation of model performance at multiple sites reveals that SWAT can consistently simulate the daily streamflow, and monthly/annual sediment and nutrient loads (nitrate nitrogen and mineral phosphorus) in the basin. We also used the calibrated model to estimate the trap efficiencies of sediment (～78%) and nutrients (～30%) in the Coralville Reservoir within the basin. These non-negligible effects emphasize the significance of incorporating the sediment and nutrient removal mechanisms into watershed system studies. The spatial quantification of the critical NPS pollution loads can help identify hot-spot areas that are likely locations for the best management practices.     

Comparison of air quality data obtained from roof top,sidewalk and suburban areas

A comparison of air quality data obtained at a downtown roof top location, a surburban area, a main road curbside and adjacent to a major highway was conducted. The results of this study revealed that a reasonably good correlation between daily average concentrations at these locations can be established. For primary pollutants it was found that within the immediate release zone their average concentration is 3.5 to 4.0 times higher than at a close location but at roof top level. Total suspended particulate (TSP) concentration was found to increase by about 80%, and O₃ is reduced by about 25%. No significant difference was obtained between daily averages obtained at the city center location and the suburb site 5 km away.     

Cost-effectiveness and cost-benefit analysis of BMPs in controlling agricultural nonpoint source pollution in China based on the SWAT model

Best management practices (BMPs) have been widely used in managing agricultural nonpoint source pollution (ANSP) at the watershed level. Most BMPs are related to land use, tillage management, and fertilizer levels. In total, seven BMP scenarios (Reforest1, Reforest2, No Tillage, Contour tillage, and fertilizer level 1–4) that are related to these three factors were estimated in this study. The objectives were to investigate the effectiveness and cost-benefit of these BMPs on ANSP reduction in a large tributary of the Three Gorges Reservoir (TGR) in China, which are based on the simulation results of the Soil and Water Assessment Tool (SWAT) model. The results indicated that reforestation was the most economically efficient of all BMPs, and its net benefits were up to CNY 4.36×10⁷ years^?1 (about USD 7.08×10⁶ years^?1). Regarding tillage practices, no tillage practice was more environmentally friendly than other tillage practices, and contour tillage was more economically efficient. Reducing the local fertilizer level to 0.8-fold less than that of 2010 can yield a satisfactory environmental and economic efficiency. Reforestation and fertilizer management were more effective in reducing total phosphorus (TP), whereas tillage management was more effective in reducing total nitrogen (TN). When CNY 10,000 (about USD 162) was applied to reforestation, no tillage, contour tillage, and an 0.8-fold reduction in the fertilizer level, then annual TN load can be reduced by 0.08, 0.16, 0.11, and 0.04 t and annual TP load can be reduced by 0.04, 0.02, 0.01 and 0.03 t, respectively. The cost-benefit (CB) ratios of the BMPs were as follows: reforestation (207 %) > contour tillage (129 %) > no tillage (114 %) > fertilizer management (96 and 89 %). The most economical and effective BMPs can be designated as follows: BMP1 (returning arable land with slopes greater than 25° to forests and those lands with slopes of 15–25° to orchards), BMP2 (implementing no tillage on arable land with slopes less than 15°), and BMP5 (0.8-fold less than that of 2010).     

Critical evaluation of PAH source apportionment tools using data from the Swiss soil monitoring network

In this study a large dataset on the polycyclic aromatic hydrocarbon (PAH) content of Swiss soils was analysed to evaluate two source apportionment tools, i.e., characteristic PAH ratios/molecular markers and a linear mixing model. Population density and total organic carbon (TOC) content were identified by a multiple regression model as independently and positively influencing the PAH concentrations in Swiss background soil. Specifically, TOC was more strongly positively correlated with the sum of light PAH (naphthalene to phenanthrene) than with the sum of heavy PAH (anthracene to benzo[ghj]perylene), whereas population density was more strongly positively correlated with the sum of heavy PAH than with light PAH. In addition, the sum of the heavy PAH as well as the total sum correlated negatively with sample site altitude. It is therefore hypothesised that heavy PAH are less mobile, whereas light PAH were closer to equilibrium with TOC in the soil. Similar results were found for polychlorinated biphenyls (PCB). The characteristic ratios and molecular markers pointed to pyrogenic origin of PAH in Swiss background soil but did not allow for further differentiation of individual fuel contributions, even though attempts to take environmental fractionation processes into account were made. The comparison of three soil profiles identified with a linear mixing model from the pattern of 16 PAH with >300 PAH emission profiles from the literature suggested urban dust, wood combustion and binders from asphalt as PAH sources. However, also here, environmental fractionation processes probably obscured source characteristic PAH ratios and fingerprints, which thus need to be interpreted with caution.     

A simple linear model for estimating ozone AOT40 at forest sites from raw passive sampling data

A rapid, empirical method is described for estimating weekly AOT40 from ozone concentrations measured with passive samplers at forest sites. The method is based on linear regression and was developed after three years of measurements in Trentino (northern Italy). It was tested against an independent set of data from passive sampler sites across Italy. It provides good weekly estimates compared with those measured by conventional monitors (0.85 ≤R(2)≤ 0.970; 97 ≤ RMSE ≤ 302). Estimates obtained using passive sampling at forest sites are comparable to those obtained by another estimation method based on modelling hourly concentrations (R(2) = 0.94; 131 ≤ RMSE ≤ 351). Regression coefficients of passive sampling are similar to those obtained with conventional monitors at forest sites. Testing against an independent dataset generated by passive sampling provided similar results (0.86 ≤R(2)≤ 0.99; 65 ≤ RMSE ≤ 478). Errors tend to accumulate when weekly AOT40 estimates are summed to obtain the total AOT40 over the May-July period, and the median deviation between the two estimation methods based on passive sampling is 11%. The method proposed does not require any assumptions, complex calculation or modelling technique, and can be useful when other estimation methods are not feasible, either in principle or in practice. However, the method is not useful when estimates of hourly concentrations are of interest.     

双程序双样品污染源监测采样方法探讨

本文针对当前环境监测四级站的污染源监测特点,提出了双程序双样品的监测采样方法．可避免排污企业受自身利益的驱使而对污染物排放采取弄虚作假的行为,使污染源监测更为客观公正,有利于污染源的监督管理。     

Load estimation and source apportionment of nonpoint source nitrogen and phosphorus based on integrated application of SLURP model, ECM, and RUSLE: a case study in the Jinjiang River, China

The nonpoint source (NPS) pollution is difficult to manage and control due to its complicated generation and formation. Load estimation and source apportionment are an important and necessary process for efficient NPS control. Here, an integrated application of semi-distributed land use-based runoff process (SLURP) model, export coefficients model (ECM), and revise universal soil loss equation (RUSLE) for the load estimation and source apportionment of nitrogen and phosphorus was proposed. The Jinjiang River (China) was chosen for the evaluation of the method proposed here. The chosen watershed was divided into 27 subbasins. After which, the SLURP model was used to calculate land use runoff and to estimate loads of dissolved nitrogen and phosphorus, and ECM was applied to estimate dissolved loads from livestock and rural domestic sewage. Next, the RUSLE was employed for load estimation of adsorbed nitrogen and phosphorus. The results showed that the 12,029.06 t?a^?1 pollution loads of total NPS nitrogen (TN) mainly originated from dissolved nitrogen (96.24 %). The major sources of TN were land use runoff, which accounted for 45.97 % of the total, followed by livestock (32.43 %) and rural domestic sewage (17.83 %). For total NPS phosphorous (TP), its pollution loads were 570.82 t?a^?1 and made up of dissolved and adsorbed phosphorous with 66.29 and 33.71 % respectively. Soil erosion, land use runoff, rural domestic sewage, and livestock were the main sources of phosphorus with contribution ratios of 33.71, 45.73, 14.32, and 6.24 % respectively. Therefore, land use runoff, livestock, and soil erosion were identified as the main pollution sources to influence loads of NPS nitrogen and phosphorus in the Jinjiang River and should be controlled first. The method developed here provided a helpful guideline for conducting NPS pollution management in similar watershed.     

Quantifying sample biases of inland lake sampling programs in relation to lake surface area and land use/cover

We quantified potential biases associated with lakes monitored using non-probability based sampling by six state agencies in the USA (Michigan, Wisconsin, Iowa, Ohio, Maine, and New Hampshire). To identify biases, we compared state-monitored lakes to a census population of lakes derived from the National Hydrography Dataset. We then estimated the probability of lakes being sampled using generalized linear mixed models. Our two research questions were: (1) are there systematic differences in lake area and land use/land cover (LULC) surrounding lakes monitored by state agencies when compared to the entire population of lakes? and (2) after controlling for the effects of lake size, does the probability of sampling vary depending on the surrounding LULC features? We examined the biases associated with surrounding LULC because of the established links between LULC and lake water quality. For all states, we found that larger lakes had a higher probability of being sampled compared to smaller lakes. Significant interactions between lake size and LULC prohibit us from drawing conclusions about the main effects of LULC; however, in general lakes that are most likely to be sampled have either high urban use, high agricultural use, high forest cover, or low wetland cover. Our analyses support the assertion that data derived from non-probability-based surveys must be used with caution when attempting to make generalizations to the entire population of interest, and that probability-based surveys are needed to ensure unbiased, accurate estimates of lake status and trends at regional to national scales.     

Distribution of airborne particles from multi-emission source

The purpose of this work was to study the distribution of airborne particles in the surroundings of an iron and steel factory in southern Finland. Several sources of particulate emissions are lying side by side, causing heavy dust loading to the environment. This complicated multi-pollutant situation was studied mainly by SEM/EDX methodology.Particles accumulated on Scots pine bark were identified andquantitatively measured according to their element content,size and shape. As a result, distribution maps of particulateelements were drawn and the amount of different particle typesalong the study lines was plotted. Particulate emissions fromthe industrial or energy production processes were not themain dust source. Most emissions were produced from theclinker crusher. Numerous stockpiles of the industrial wastesand raw materials also gave rise to particulate emissions as aresult of wind erosion. It was concluded that SEM/EDXmethodology is a useful tool for studying the distribution ofparticulate pollutants.     

Estimation of required monitoring time for obtaining validation data in enclosed spaces

Methods for estimating airborne contaminant concentrations at specific locations within enclosed spaces, such as mathematical models and computational fluid dynamics (CFD), often are validated against directly measured concentrations. However, concentration variation with time introduces uncertainty into the measured concentration. Failure to determine monitoring time requirements can lead to errors in quantifying representative concentrations, which are likely to be attributed to errors in the method being validated. In the current study, to obtain the representative concentrations at multiple locations with a direct reading instrument, we used the standard deviation ratio (SDR) method to determine the required minimum monitoring time within a specified precision limit. To demonstrate the use of the SDR approach in constructing precision confidence intervals, tracer gas concentrations at nine sampling locations in an experimental room were measured to obtain population parameters. Three flow rates of 0.9, 3.3 and 5.5 m(3) min(-1) were employed and contaminant concentrations were measured using a photoionization analyser. Monitoring time requirements varied substantially with location within the room and were strongly dependent upon the flow rate of air through the room. The proposed method would be very useful for industrial hygienists and indoor air researchers who sometimes need to obtain several hundred measured concentrations for validation purposes or to perform tests under repeatable conditions in enclosed spaces. This study also showed that the proposed method can be used to devise efficient indoor monitoring strategies.     

Estimation of underwater visibility in coastal and inland waters using remote sensing data

An optical method is developed to estimate water transparency (or underwater visibility) in terms of Secchi depth (Z _sd ), which follows the remote sensing and contrast transmittance theory. The major factors governing the variation in Z _sd , namely, turbidity and length attenuation coefficient (1/(c + K _d ), c = beam attenuation coefficient; K _d  = diffuse attenuation coefficient at 531 nm), are obtained based on band rationing techniques. It was found that the band ratio of remote sensing reflectance (expressed as (R _rs (443) + R _rs (490))/(R _rs (555) + R _rs (670)) contains essential information about the water column optical properties and thereby positively correlates to turbidity. The beam attenuation coefficient (c) at 531 nm is obtained by a linear relationship with turbidity. To derive the vertical diffuse attenuation coefficient (K _d ) at 531 nm, K _d (490) is estimated as a function of reflectance ratio (R _rs (670)/R _rs (490)), which provides the bio-optical link between chlorophyll concentration and K _d (531). The present algorithm was applied to MODIS-Aqua images, and the results were evaluated by matchup comparisons between the remotely estimated Z _sd and in situ Z _sd in coastal waters off Point Calimere and its adjoining regions on the southeast coast of India. The results showed the pattern of increasing Z _sd from shallow turbid waters to deep clear waters. The statistical evaluation of the results showed that the percent mean relative error between the MODIS-Aqua-derived Z _sd and in situ Z _sd values was within ±25%. A close agreement achieved in spatial contours of MODIS-Aqua-derived Z _sd and in situ Z _sd for the month of January 2014 and August 2013 promises the model capability to yield accurate estimates of Z _sd in coastal, estuarine, and inland waters. The spatial contours have been included to provide the best data visualization of the measured, modeled (in situ), and satellite-derived Z _sd products. The modeled and satellite-derived Z _sd values were compared with measurement data which yielded RMSE = 0.079, MRE = ?0.016, and R ²  = 0.95 for the modeled Z _sd and RMSE = 0.075, MRE = 0.020, and R ²  = 0.95 for the satellite-derived Z _sd products.     

Some phenolic compounds of extracts obtained from Origanum species growing in Turkey

Caffeic acid, rosmarinic acid, rutin, apigenin 7-O-glucoside, apigenin, and acesetin were the main phenolic compounds of Origanum onites extracts in all applications. While acesetin contents ranged from 133.59 mg/100 g (U1) to 437.25 mg/100 g (S3), rosmarinic acid changed between 215.94 mg/100 g (U4) and 1120.56 mg/100 g (S2) in Origanum vulgare L. subsp. hirtum (Link) Ietsw. Both rosmarinic acid and acesetin were not found in U5 application. Only caffeic acid (19.39 mg/100 g) was found in U5 application. Rosmarinic acid contents of O. onites extract changed between 158.62 mg/100 g (U5) and 799.87 mg/100 g (S2). Generally, dominant phenolic compound of Origanum extracts was rosmarinic acid compared with other extracts. In addition, methanol:water:acetic acid mixture (S2) (95:4.5:0.5) was found as the best application. Phenolic contents of extracts obtained with U series mixtures were found low.     

The role of hydrodynamics, matrix and sampling duration in passive sampling of polar compounds with Empore SDB-RPS disks

There is an increasing need to monitor concentrations of polar organic contaminants in the aquatic environment. Integrative passive samplers can be used to assess time weighted average aqueous concentrations, provided calibration data are available and sampling rates are known. The sampling rate depends on environmental factors, such as temperature and water flow rate. Here we introduce an apparatus to investigate the sampling properties of passive samplers using river-like flow conditions and ambient environmental matrices: river water and treated sewage effluent. As a model sampler we selected Empore SDB-RPS disks in a Chemcatcher housing. The disks were exposed for 1 to 8 days at flow rates between 0.03 and 0.4 m s(-1). Samples were analysed using a bioassay for estrogenic activity and by LC-MS-MS target analysis of the pharmaceuticals sulfamethoxazole, carbamazepine and clarithromycin. In order to assess sampling rates of SDB disks, we also measured aqueous concentrations of the pharmaceuticals. Sampling rates increased with increasing flow rate and this relationship was not affected by the environmental matrix. However, SDB disks were only sampling in the integrative mode at low flow rates <0.1 m s(-1) and/or for short sampling times. The duration of linear uptake was particularly short for sulfamethoxazole (1 day) and longer for clarithromycin (5 days). At 0.03 m s(-1) and 12-14 degrees C, the sampling rate of SDB disks was 0.09 L day(-1) for clarithromycin, 0.14 L day(-1) for sulfamethoxazole and 0.25 L day(-1) for carbamazepine. The results show that under controlled conditions, SDB disks can be effectively used as passive sampling devices.     

Solvent-free sampling with di-n-butylamine for monitoring of isocyanates in air

The solvent-free sampler for airborne isocyanates consisted of a polypropylene tube with an inner wall coated with a glass fibre filter, coupled in series with a 13 mm glass fibre filter. The filters were impregnated with reagent solution containing equimolar amounts of di-n-butylamine (DBA) and acetic acid. Air sampling was performed with an air flow of 0.2 l min(-1). The formed isocyanate-DBA derivatives were determined using liquid chromatography and tandem mass spectrometry. The sampler was investigated in regard to collection principle and extraction of the formed derivatives with good results. The possibility to store the sampler before sampling and to perform long-term sampling was demonstrated. Field extraction of the sampler was not necessary, as there was no difference between immediately extracted samples and stored ones (2 days). In comparative studies, the sampler was evaluated against a reference method, impinger-filter sampling with DBA as reagent. The ratios between the results obtained with the sampler and the reference in a test chamber at a relative humidity (RH) of 45% was in the range of 83-109% for isocyanates formed during thermal decomposition of PUR. At RH 95%, the range was 72-101% with the exception of isocyanic acid. In two field evaluations, the ratios for fast curing 2,4'- and 4,4'-methylene bisphenyl diisocyanate (MDI) was in the range 81-113% and for the 3-ring MDI the range was 54-70%. For the slower curing 1,6-hexamethylene diisocyanate (HDI) and HDI isocyanurate, the ratios were in the range 78-145%. In conclusion, the solvent-free sampler is a convenient alternative in most applications to the more cumbersome impinger-filter sampler.     

Estimation of methane and nitrous oxide emissions from rice field with rice straw management in Cambodia

To estimate the greenhouse gas emissions from paddy fields of Cambodia, the methodology of the Intergovernmental Panel on Climate Change (IPCC) guidelines, IPCC coefficients, and emission factors from the experiment in Thailand and another country were used. Total area under rice cultivation during the years 2005–2006 was 2,048,360 ha in the first crop season and 298,529 ha in the second crop season. The emission of methane from stubble incorporation with manure plus fertilizer application areas in the first crop season was estimated to be 192,783.74 ton higher than stubble with manure, stubble with fertilizer, and stubble without fertilizer areas. The fields with stubble burning emitted the highest emission of methane (75,771.29 ton) followed by stubble burning with manure (22,251.08 ton), stubble burning with fertilizer (13,213.27 ton), and stubble burning with fertilizer application areas (3,222.22 ton). The total emission of methane from rice field in Cambodia for the years 2005–2006 was approximately 342,649.26 ton (342.65 Gg) in the first crop season and 36,838.88 ton (36.84 Gg) in the second crop season. During the first crop season in the years 2005–2006, Battambang province emitted the highest amount of CH₄ (38,764.48 ton) and, in the second crop season during the years 2005–2006, the highest emission (8,262.34 ton) was found in Takeo province (8,262.34 ton). Nitrous oxide emission was between 2.70 and 1,047.92 ton in the first crop season and it ranged from 0 to 244.90 ton in the second crop season. Total nitrous oxide emission from paddy rice field was estimated to be 9,026.28 ton in the first crop season and 1,091.93 ton in the second crop season. Larger area under cultivation is responsible for higher emission of methane and nitrous oxide. Total emission of nitrous oxide by using IPCC default emission coefficient was approximately 2,328.85 ton. The total global warming potential of Cambodian paddy rice soil is 11,723,217.03 ton (11,723 Gg) equivalents of CO₂.     

Historical data review and source analysis of PCBs/Arochlors in the Lower Leon Creek Watershed

PCBs have been banned since the late 1970s, but concentrations still exist in sediments and riverine fish and continue to exceed regulatory limits which can result in negative health effects. This study looks at historical records of PCB and Arochlor concentrations in surface water, sediments, and fish tissue for the Lower Leon Creek, Bexar County in Texas. Temporal analysis on the concentrations of PCBs and Arochlors was conducted for detection and exceedance of selected screening criteria. In addition, the half-lives of select PCB congeners were calculated for 2007–2012 data to ascertain differences in PCB concentrations with their hydrophobicity. Source analysis was conducted to determine the potential contributing sources of PCB contamination using source data (landfills, outfalls, etc.) and the PCB exceedance data. For sediment and fish tissue sampling results, historic data shows high concentrations of PCB/Arochlors over the course of several decades. The historical data is characterized as being widely variable for detections in Arochlors and concentrations between years, with a dramatic drop in concentrations detected starting in 2009. Overall, the sampling locations adjacent to and downstream from the former Kelly Air Force Base have the highest concentrations of PCB/Arochlors over the longest period of time. The results of this work will aid regulatory agencies in addressing impairment.     

Modified Grey Model and its application to groundwater flow analysis with limited hydrogeological data: a case study of the Nubian Sandstone, Kharga Oasis, Egypt

Groundwater flow at Kharga Oasis, located in the western desert of Egypt, was previously analyzed using numerical models; however, the lack of basic data often limits the implementation of these models, as well as introducing a problem for model calibration and validation. The Grey Model (GM) was used to overcome these difficulties of data limitation and uncertainty of hydrogeological conditions. However, no clear theories exist for selecting the number of input model trends and the most suitable values of input parameters. Therefore, in the current study, a modification of the GM is newly proposed and called the Modified Grey Model (MGM) in an attempt to determine a process for selecting the best input models' trends with the appropriate values of input parameters to achieve acceptable fitting to observations. The sensitivity analysis results showed that the MGM produced more stable results than the GM using a wide range of values for input parameters. Moreover, the MGM reduced the calculation time required for fitting the measured piezometric level trends by 99.8 %. Three development scenarios of groundwater withdrawal were proposed that involved either expanding the present extraction rate or redistributing the groundwater withdrawal over the recent working production wells (RWPWs). The results concluded that the groundwater table in the northern part of the oasis could be temporally recovered to an economical piezometric level; however, the table in the southern part is severely decreased. Therefore, new production wells are recommended to be constructed in the southern part far enough from the RWPWs.