石油醚为油相的乳状液膜稳定性研究

以石油醚为油相,以聚异丁烯单丁二酰亚胺(T151)、聚异丁烯多丁二酰亚胺(T155)为表面活性剂,制备了W/O(W代表水相,O代表油相,下同)单重乳液和W/O/W多重乳液,并进行了乳状液膜稳定性的研究.以破乳率、泄漏率和表观溶胀率为衡量指标,考察了表面活性剂种类和用量、油水比(油相体积与内水相体积的比)、乳水比(W/O单重乳液的体积与外水相体积的比)、制乳转速等参数对乳状液膜稳定性的影响.结果表明,表面活性剂的用量、油水比、乳水比和制乳转速均存在最佳值,即:(a)T151体积分数6%,油水比1:1,一次制乳转速3 000 r/min,乳水比为1:6,二次制乳转速300 r/min;(b)T155体积分数4%,油水比1:1,一次制乳转速4 000 r/min,乳水比为1:8,二次制乳转速400 r/min,此时的W/O/W多重乳液乳状液膜最稳定.     

Use of semipermeable membrane devices (SPMDs)

Triolein-containing semipermeable membrane devices (SPMDs) were employed as passive samplers to provide data on the bioavailable fraction of organic, waterborne, organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs) and polynuclear aromatic hydrocarbons (PAHs) in streams flowing through a highly polluted industrial area of Bitterfeld in Saxony-Anhalt, Germany. The contamination of the region with organic pollutants originates in wastewater effluents from the chemical industry, from over one-hundred years of lignite exploitation, and from chemical waste dumps. The main objective was to characterise time-integrated levels of dissolved contaminants, to use them for identification of spatial trends of contamination, and their relationship to potential pollution sources. SPMDs were deployed for 43 days in the summer of 1998 at four sampling sites. The total concentration of pollutants at sampling sites was found to range from a low of 0.8 microgram/SPMD to 25 micrograms/SPMD for PAHs, and from 0.4 microgram/SPMD to 22 micrograms/SPMD for OCPs, respectively. None of the selected PCB congeners was present at quantifiable levels at any sampling site. A point source of water pollution with OCPs and PAHs was identified in the river system considering the total contaminant concentrations and the distribution of individual compounds accumulated by SPMDs at different sampling sites. SPMD-data was also used to estimate average ambient water concentrations of the contaminants at each field site and compared with concentrations measured in bulk water extracts. The truly dissolved or bioavailable portion of contaminants at different sampling sites ranged from 4% to 86% for the PAHs, and from 8% to 18% for the OCPs included in the estimation. The fraction of individual compounds found in the freely dissolved form can be attributed to the range of their hydrophobicity. In comparison with liquid/liquid extraction of water samples, the SPMD method is more suitable for an assessment of the background concentrations of hydrophobic organic contaminants because of substantially lower method quantification limits. Moreover, contaminant residues sequestered by the SPMDs represent an estimation of the dissolved or readily bioavailable concentration of hydrophobic contaminants in water, which is not provided by most analytical approaches.     

A comparison of polycyclic aromatic hydrocarbon and petroleum hydrocarbon uptake by mussels (Perna viridis) and semi-permeable membrane devices (SPMDs) in Hong Kong coastal waters

The ability of mussels (Perna viridis) and semi-permeable membrane devices (SPMDs) to accumulate polycyclic aromatic hydrocarbons (PAHs) and petroleum hydrocarbons (PHCs) from five sites in Hong Kong's coastal waters was compared. Mussels consistently had higher levels of contaminants, but their utility was limited at one highly polluted site due to mortality. Mussels and SPMDs ranked sites differently in terms of individual contaminant levels. Although SPMDs overcome many of the disadvantages of using living organisms to measure contaminants in marine waters, they cannot be used as "mimics" due to different PAH and PHC accumulation patterns.     

Stigmastane and hopanes as conserved biomarkers for estimating oil biodegradation in a former refinery plant-contaminated soil

In the last decade, a refinery plant located in Lido Adriano, East Ravenna (Italy) has been subject to mineral oil contamination. The mineral crude oil, extracted from the offshore in Adriatic sea, consisted of 78% aliphatics, cyclic alkanes and saturated polycyclic hydrocarbons, 9% aromatics, polycyclic aromatic hydrocarbons (PAHs) and alkylated derivatives, and 13% of tars/asphaltenes. Analysis of soil after 10 years of natural attenuation revealed a complete depletion of linear (n-C(9)-C(24)), light aromatics (C1-C3/benzenes) and PAHs (C2/naphthalene, C1/phenanthrene); besides a substantial degradation of isoprenoids prystane and phytane, branched and cyclic alkanes. The remaining contaminants which withstood to natural degradation was saturated polycyclic hydrocarbons (perhydro-PAH derivatives), unsaturated polycyclic hydrocarbons (tetrahydro, dihydro-PAH derivatives), terpanes, steranes and unidentified compounds. Such residues resulted in 80% reduction of its concentration after two months of laboratory treatment. Samples were extracted by organic solvents, separated by silica/alumina gel column chromatography and analyzed by gas chromatography-mass selective detector (GC-MSD). Identification and quantification of aliphatic, cyclic alkanes, typical PAHs, terpanes and steranes were carried out to chromatograms of M/Z=85, 83, individual M/Zs, M/Z=191 and 217, respectively. The present work shows that, among numerous biomarkers present in the source oil, stigmastane and two isomers of hopane showed invariable concentrations after laboratory experiments that mimic natural biodegradation in the field, so they can be used as conserved internal biomarkers. These are very useful tools to assess alterations in less stable classes of saturated compounds contained in petroleum. Marked degradation of perhydro, tetrahydro, dihydro-PAH derivatives in the laboratory treatment has been evidenced.     

Removal of petroleum pollutants and monitoring of bacterial community structure in a membrane bioreactor

The long-term operational stability (159 d) in removal of organics and ammonia from synthetic wastewater was investigated. The experiment was carried out in two identical plug flow membrane bioreactors (MBR) (each with a submerged A4 Kubota membrane) operated under aerobic conditions. The vacuum distillate of a crude oil fraction in the emulsified state, which was used to model the petroleum pollutants, was added into the feed medium. The performance of biological treatment was evaluated by physicochemical analyses such as nitrogen forms, COD, and BOD. Additionally, monitoring of PAHs in the wastewaters was performed using HPLC-diode array detector. Moreover, the community structure of bacteria was analyzed by polymerase chain reaction-denaturing gradient gel electrophoresis. The MBR treatment was very effective with reduction by more than 90% of COD and Total Organic Carbon. Nearly complete removal of petroleum originated non-polar micropollutants was observed. The influence of the highest dosage of petroleum pollutants (1000 μLL(-1)) on the bacterial community was noted.     

Acute toxicity and genotoxicity of aquatic hydrophobic pollutants sampled with semipermeable membrane devices

Triolein-filled semipermeable membrane devices (SPMDs) were deployed for 4 weeks in polluted water sources in Lithuania. The mixtures of pollutants sampled by the SPMDs were fractionated by size-exclusion chromatography (SEC). The fraction containing average molecular weight compounds such as polycyclic aromatic hydrocarbons (PAHs) and organochlorine pesticides was screened by gas chromatography and mass spectrometry. The whole (non-fractionated) samples and their SEC fractions were tested in bioassays including Microtox, Mutatox, Daphnia pulex immobilization assay and the sister chromatid exchange (SCE) in human lymphocytes in vitro test. The Microtox test was most sensitive with the estimated EC(50) values in the range of milligrams or even micrograms per milliliter based on the amount of the SPMD triolein. Part of the observed toxicity was caused by elemental sulfur co-sampled by the SPMDs from sediments. The sum of toxicity equivalents of the SEC fractions was smaller than the relative toxicity of the whole samples indicating the presence of synergistic interactions in the complex mixtures of chemical pollutants. The toxic or genotoxic response induced by the chemical mixtures and their fractions was smaller in the D. pulex, Mutatox and SCE tests. In Mutatox, a positive response was only detected without the S9 metabolic activation which indicates the presence of mainly direct-acting mutagens in the samples. Interpretation of the Mutatox data was difficult due to the complexity of dose-response and time-response relationships. The study has demonstrated the potential as well as some limitations of SPMDs in the monitoring of biological effects of bioavailable organic pollutants in the aquatic environment.     

Accumulation of organochlorine pesticides by semipermeable membrane devices using composite complex

Semipermeable membrane devices (SPMDs) were developed for passive in situ monitoring of organochlorine pesticides (OCPs) in aqueous solution in both laboratory and field (Pearl River Delta, China) studies. The device consisted of a thin film of neutral lipid triolein, enclosed in thin-walled tubing made of composite cellulose acetate membrane (CA) supported by linear low density polyethylene (LLDPE) (CAPE). Results from the laboratory and field application indicated that triolein-CAPE (TCAPE) could quickly and efficiently accumulate hydrophobic OCPs in water and uptake equilibrium could reached within 20h in the laboratory. Some mathematical relationships of TCAPE-water partition coefficient (logK(sw)), triolein-water partition coefficient (logK(tw)) and octanol-water partition coefficient (logK(ow)) were developed under the laboratory conditions. A good correlation of accumulation in TCAPE with r(2) values ranging from 0.55 to 0.86 for individual OCPs (n=8) and an excellent correlation of logK(sw) and logK(ow) was also obtained under the field conditions. The average OCPs concentration in the surface water could be estimated by measuring OCPs concentration in the device under the field conditions.     

Semipermeable membrane device (SPMD) for monitoring PCDD and PCDF levels from a paper mill effluent in the Androscoggin River, Maine, USA

Paper mill effluents may contain polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) that are normally generated due to chlorinated bleaching of pulp and paper. We used the semipermeable membrane device (SPMD) to monitor PCDD/F levels upstream and downstream of a paper mill on the Androscoggin River, in Jay (ME). Following the 36 day deployment, SPMD dialysis and cleanup, the samples were analyzed by HRGC/HRMS. Total concentrations of PCDD/Fs in SPMDs (sum of all tetra-through octachlorinated congeners) ranged from 4.71 pg g(-1) to 26.26 pg g(-1). Five out of the targeted 17 toxic congeners were detected, including: 2,3,7,8-TCDF; 1,2,3,7,8-PeCDF; 2,3,4,7,8-PeCDF; 1,2,3,4,6,7,8-HpCDD and OCDD. Permeability reference compounds (PRCs) were used for in situ calibration of the SPMD sampling rate (Rs). In all sites, water concentrations were the highest for OCDD (0.081-0.103 pg l(-1)), and the lowest for 1,2,3,7,8-PeCDF (0.005-0.009 pg l(-1)). There was not a consistent pattern of upstream-downstream gradient in the PCDD/F levels. This suggested that processes other than the mill in Jay (multiple sources, river dynamics) governed the flux of PCDD/Fs in the sampling locations. The SPMD results were validated by comparison to other studies on the Androscoggin River and elsewhere, confirming the potential of the device as a useful monitoring technique for PCDD/Fs in large river systems.     

Lipid-Filled semipermeable membrane devices and mussels as samplers of organochlorine compounds in lake water

Semipermeable membrane sampling devices (SPMDs) and caged lake mussels (Anodonta piscinalis) were simultaneously deployed at four lake watercourse sites in Central Finland four weeks in August 1992. This study was part of the regular annual monitoring of the organochlorine compounds (OCC) in pulp-mill recipient watercourses of Finland with bivalves. Chlorohydrocarbons (CHCs), chlorophenol compounds (PCPs), chloroanisoles (PCAs) and chloroveratroles (PCVs) were analyzed from lipid extract of mussels and from the synthetic triolein lipid of the SPMDs. Hexane-diethyl ether (9:1, v/v) dialysis using polyethylene membrane was applied in dean up of the SPMD lipids and, for comparison, to six sets of the mussel fat. Dialysis recovered CHCs but not PCPs from the mussel fat. CHCs, PCPs, PCAs and PCVs were all recovered in dialysis of the SPMD lipid. Handling of SPMDs in the transport and deployment operations caused significant OCC contamination for the blank SPMDs. Similar trends were revealed in the OCC profiles for mussels ans SPMDs. An exception was the lack of PCPs appearing in SPMDs that did appear in mussels and in a complementary manner the appearance of the PCAs and PCVs in SPMDs.     

Purification of triolein for use in semipermeable membrane devices (SPMDs)

Analyses of triolein-containing semipermeable membrane devices (SPMDs) have sometimes been impeded by interferences caused by impurities endemic to triolein that codialyze with the analytes. Oleic acid and methyl oleate have been the most troublesome of these impurities because of their relatively high concentrations in triolein and because significant residues of both can persist even after size exclusion chromatographic (SEC) fractionation. These residues have also been blamed for false-positive signals during bioindicator testing of SPMD dialysates. To prevent these problems, a simple, cost-effective procedure was developed for purifying triolein destined for use in SPMDs: the bulk triolein is repeatedly (6x) partitioned against methanol. Tests of the procedure show that 14C-oleic acid is completely removed from the triolein. After SEC fractionation, dialysates of standard-size SPMDs made with the purified triolein contain less than 5 microg of methyl oleate as compared to sometimes more than 500 microg for dialysates (also after SEC) of SPMDs made with unpurified triolein. Gas chromatographic analyses with flame ionization and electron capture detection show that the purification treatment also greatly reduces the number and size of peaks caused by unidentified contaminants in the triolein. Microtox basic assay of dialysates of SPMDs shows that those made with the purified triolein have lower acute toxicities than dialysates of SPMDs made with unpurified triolein. Yeast estrogen screen (YES) testing of SPMDs fabricated with unpurified and purified triolein demonstrates that the purification process removes all background estrogenic activity.     

HPLC-PFD determination of priority pollutant PAHs in water,sediment, and semipermeable membrane devices

High performance liquid chromatography coupled with programmable fluorescence detection was employed for the determination of 15 priority pollutant polycyclic aromatic hydrocarbons (PPPAHs) in water, sediment, and semipermeable membrane devices (SPMDs). Chromatographic separation using this analytical method facilitates selectivity, sensitivity (ppt levels), and can serve as a non-destructive technique for subsequent analysis by other chromatographic and spectroscopic techniques. Extraction and sample cleanup procedures were also developed for water, sediment, and SPMDs using various chromatographic and wet chemical methods. The focus of this publication is to examine the enrichment techniques and the analytical methodologies used in the isolation, characterization, and quantitation of 15 PPPAHs in different sample matrices.     

Prediction of PCB content in sportfish using semipermeable membrane devices (SPMDs)

Triolein-filled semipermeable membrane devices (SPMDs) were immersed at three locations along the St. Joseph River in northern Indiana for 30 days to see if the PCB content of fish from the same location could be predicted with this model device. Triolein from the SPMD's was analyzed for PCB using enzyme-linked immunosorbent assay (ELISA) and compared to residues detected in fish collected from the same locations. There was a significant difference (p < 0.05) in total PCB concentrations between SPMD samples. However, due to variability in PCB residues between species and low PCB residues in SPMDs, a direct correlation between PCBs in sportfish and SPMDs could not be determined.     

Sequestration of priority pollutant PAHs from sediment pore water employing semipermeable membrane devices

Semipermeable membrane devices (SPMDs) were employed to sample sediment pore water in static exposure studies under controlled laboratory conditions using (control pond and formulated) sediments fortified with 15 priority pollutant polycyclic aromatic hydrocarbons (PPPAHs). The sediment fortification level of 750 ng/g was selected on the basis of what might be detected in a sediment sample from a contaminated area. The sampling interval consisted of 0, 4, 7, 14, and 28 days for each study. The analytical methodologies, as well as the extraction and sample cleanup procedures used in the isolation, characterization, and quantitation of 15 PPPAHs at different fortification levels in SPMDs, water, and sediment were reported previously (Williamson, M.S. Thesis, University of Missouri-Columbia, USA; Williamson et al., Chemosphere (This issue--PII: S0045-6535(02)00394-6)) and used for this project. Average (mean) extraction recoveries for each PPPAH congener in each matrix are reported and discussed. No procedural blank extracts (controls) were found to contain any PPPAH residues above the method quantitation limit, therefore, no matrix interferences were detected. The focus of this publication is to demonstrate the ability to sequester environmental contaminants, specifically PPPAHs, from sediment pore water using SPMDs and two different types of fortified sediment.     

Partitioning of fluorotelomer alcohols (FTOH) to semipermeable membrane devices (SPMD)

Background, aim, and scope  

Fluorotelomer alcohols (FTOH) are widely used substances that were detected even in remote regions of the world. For the determination of FTOH in the atmosphere, appropriate sampling techniques are needed. In this study, triolein-filled low-density polyethylene tubes were used as semipermeable membrane devices (SPMD) and tested for their suitability as passive air samplers for FTOH.     

Little effect of excessive biofouling on the uptake of organic contaminants by semipermeable membrane devices

The effects of water flow rate and antifouling agents on the extent of biofouling and on the uptake of non-polar organic contaminants by semipermeable membrane devices (SPMDs) were studied during four field experiments in the Western Wadden Sea. Biofouling densities on the sampler surface ranged from 0.3 to 16 g dry weight dm⁻². Water sampling rates were estimated from the dissipation rates of performance reference compounds (PRCs). The antifouling agents Irgarol and capsaicin (33 mg per ml triolein) had no noticeable effect on the extent of fouling, and caused only a 5–10% increase in the absorbed amounts. Enhanced flow rates had only a minimal effect on the amount of biofouling, but caused the water sampling rates to increase by a factor of 1.2–2. Increases in PRC-derived sampling rates were reflected by increases in the absorbed amounts for compounds that were in the linear uptake stage of the sampling process. The results imply (1) that extreme biofouling does not always result in reduced sampling rates, (2) that extreme biofouling does not preclude the existence of flow effects on the sampling rates, and (3) that differences in uptake rates are quantitatively reflected by the dissipation rates of PRCs.     

Monitoring of organic pollutants in marine environment by semipermeable membrane devices and mussels: accumulation and biochemical responses

This study involves the monitoring of organic pollutants using transplanted mussels (Mytilus galloprovincialis) as bioindicator organisms and semipermeable membrane devices (SPMDs) as passive samplers. Mussels and SPMDs were deployed to marinas, shipyards and shipbreaking yards on the coastal area of Turkey and retrieved after 60 days. Polycyclic aromatic hydrocarbons (PAH), polychlorinated biphenyls (PCB) and organochlorine pesticide (OCP) compounds were analysed with high-resolution GC-MS. Total PAH concentrations in SPMDs and mussels ranged from 200 to 4740 ng g sampler^?1 and from 7.0 to 1130 ng g^?1 in wet weight (ww). PCB and OCP concentrations in SPMDs changed between 0.04–200 and 4.0–26 ng g sampler^?1, respectively. The highest PCB (190 ng g^?1 ww) and OCP (200 ng g^?1 ww) concentrations in mussels were measured at shipyard stations. A strong correlation was observed between the PAH and PCB concentrations in SPMDs and mussels. Enzyme assays (acetylcholinesterase, ethoxyresorufin-O-deethylase, glutathione S-transferase, glutathion reductase and carboxylesterase activities) were performed as biomarkers to reveal the effects of pollution on the mussels. There was no clear relationship found between the enzyme levels and the pollutant concentrations in mussels. Integrated biomarker responses were calculated to interpret the overall effect of pollutants.

     

An approach for assessment of water quality using semipermeable membrane devices (SPMDs) and bioindicator tests

As an integral part of our continued development of water quality assessment approaches, we combined integrative sampling, instrumental analysis of widely occurring anthropogenic contaminants, and the application of a suite of bioindicator tests as a specific part of a broader survey of ecological conditions, species diversity, and habitat quality in the Santa Cruz River in Arizona, USA. Lipid-containing semipermeable membrane devices (SPMDs) were employed to sequester waterborne hydrophobic chemicals. Instrumental analysis and a suite of bioindicator tests were used to determine the presence and potential toxicological relevance of mixtures of bioavailable chemicals in two major water sources of the Santa Cruz River. The SPMDs were deployed at two sites; the effluent weir of the International Wastewater Treatment Plant (IWWTP) and the Nogales Wash. Both of these systems empty into the Santa Cruz River and the IWWTP effluent is a potential source of water for a constructed wetland complex. Analysis of the SPMD sample extracts revealed the presence of organochlorine pesticides (OCs), polychlorinated biphenyls (PCBs), and polycyclic aromatic hydrocarbons (PAHs). The bioindicator tests demonstrated increased liver enzyme activity, perturbation of neurotransmitter systems and potential endocrine disrupting effects (vitellogenin induction) in fish exposed to the extracts. With increasing global demands on limited water resources, the approach described herein provides an assessment paradigm applicable to determining the quality of water in a broad range of aquatic systems.     

Bioavailable DDT residues in sediments: laboratory assessment of ageing effects using semi-permeable membrane devices

We describe the reduction in bioavailability of DDT in contaminated soil after it was incubated as sediment for 365 d. Bioavailability was assessed using semi-permeable membranes. Contaminated soils from three cattle dip sites, one spiked paired uncontaminated site, and one spiked OECD standard soil were studied. Sandy soil with residues of 1880 mg/kg summation operator DDT incurred since 1962, initially had 4.6% of summation operator DDT available, reducing to 0.6% following 365 d. Clay soil (1108 mg summation operator DDT/kg) had 4.1% initially available, reducing to 0.3% after 365 d. Freshly spiked soils had a greater amount of DDT initially available (10.9%), but this reduced to 1.5% by the end of the incubation. Of the DDT congeners, both o,p'-DDD and p,p'-DDD were most bioavailable in the soils, but also had the most significant decrease following incubation.     

Evaluation and in situ assessment of photodegradation of polyaromatic hydrocarbons in semipermeable membrane devices deployed in ocean water

Semipermeable membrane devices (SPMDs) were deployed in water using four different methods: a typical SPMD cage with and without a mesh cover, a bowl chamber and without any protection. In addition to routinely used performance reference compounds (PRCs), perdeuterated dibenz[a,h]anthracene was added. Due to its high sampler to water partition coefficient no measurable clearance due to diffusion was expected during the deployment period, hence any observed loss could be attributed to photodegradation. The loss of PRCs was measured and SPMD-based water concentrations determined. Results showed that a typical SPMD deployment cage covered with mesh provided the best protection from photodegradation. Samplers which had undergone the highest photodegradation underestimated PAH water concentrations by up to a factor of 5 compared to the most protected SPMDs. This study demonstrates that the potential for photodegradation needs to be addressed when samplers are deployed in water of low turbidity.     

Simultaneous monitoring of profiles of polycyclic aromatic hydrocarbons in contaminated air with semipermeable membrane devices and spruce needles

Gaseous emissions of combusted electronic scrap, PVC, carpet and wood were monitored for polycyclic aromatic hydrocarbons (PAHs) by simultaneous use of semipermeable membrane devices (SPMDs) and shoots of spruce needles (Picea abies). It was found that phenanthrene, acenaphthylene and fluorene were the dominating PAHs in all samples. SPMDs and needles mainly sequestered PAH associated with the vapor phase. Particle-bound PAHs were only detected in small amounts, at which the needles tended to uptake more of these compounds in comparison to the SPMDs. Nevertheless, the logarithm of the concentrations of PAHs analyzed in both passive samplers after the same sampling period exhibited a significant linear correlation with correlation coefficients larger than 0.8073. SPMDs and spruce needles can complement each other in passive air sampling for compounds with a preference to the gas phase rather than aerosols.