Selected chloro and bromo derivatives of triclosan—syntheses and their occurrence in Canadian sewage and biosolid samples

The occurrence of triclosan (TCS), a general purpose antibacterial agent contained in numerous consumer and personal-care products, in the aquatic environment is well known. To a lesser degree, the formation of chlorinated and brominated derivatives of TCS during the chlorination of the antibacterial has also been reported. Presumably due to the lack of authentic standards, very few reports have been published on the levels of these halogenated TCSs in the environment. For this purpose, we have synthesized six selected halogenated derivatives of TCS, namely, 3-Cl-, 5-Cl-, 3,5-Cl₂-, 3-Br-, 5-Br-, and 3,5-Br₂- TCSs, with supporting ¹H-NMR (nuclear magnetic resonance) and GC–MS (gas chromatography–mass spectrometry) data for their structural assignments. Using these model compounds together with sensitive analytical methods, we were able to identify and quantify the above compounds together with their precursor compound TCS in Canadian municipal wastewater and biosolid samples for the first time. While detected in all influent (range from 1.4 to 24.1 ng L^?1) and biosolid (range from 7.7 to 274 ng g^?1) samples, the concentrations of these chlorinated TCS were generally from 100- to 1,000-fold lower than TCS in the same sample. Even lower levels (<20 ng/g in 85 % of the results) of brominated TCS were found in biosolids, and they were mostly undetected in sewage.     

Screening of organic halogens and identification of chlorinated benzoic acids in carbonaceous meteorites

The occurrence of halogenated organic compounds measured as a sum parameter and the evidence of chlorinated benzoic acids in four carbonaceous meteorites (Cold Bokkeveld, Murray, Murchison and Orgueil) from four independent fall events is reported. After AOX (Adsorbable organic halogen) and EOX (Extractable organic halogen) screening to quantify organically bound halogens, chlorinated organic compounds were analyzed by gas chromatography. AOX concentrations varying from 124 to 209 microg Cl/g d.w. were observed in carbonaceous meteorites. Ion chromatographic analysis of the distribution of organically bound halogens performed on the Cold Bokkeveld meteorite revealed that chlorinated and brominated organic compounds were extractable, up to 70%, whereas only trace amounts of organofluorines could be extracted. Chlorinated benzoic acids have been identified in carbonaceous meteorite extracts. Their presence and concentrations raise the question concerning the origin of halogenated, especially chlorinated, organic compounds in primitive planetary matter.     

Monobromo and higher brominated congeners of the marine halogenated natural product 2,3,3',4,4',5,5'-heptachloro-1'-methyl-1,2'-bipyrrole (Q1)

The marine halogenated natural product 2,3,3',4,4',5,5'-heptachloro-1'-methyl-1,2'-bipyrrole (Q1) is widely distributed in the environment. In this study, we screened samples which have previously been found to contain remarkably high residues of Q1 (blubber of marine mammals from Australia, samples from Antarctica, human milk from the Faroe Island) for the additional presence of mixed chlorinated and brominated congeners. Using GC/ECNI-MS, all samples tested were positive and many contained four out of five possible bromohexachloro congeners (BrCl6-MBPs), five out of 14 possible dibromopentachloro congeners (Br2Cl5-MBPs), five of 21 possible tribromotetrachloro-congeners (Br3Cl4-MBPs), as well as several higher brominated congeners. About 20 heptahalo congeners of Q1 are described for the first time in the scientific literature. Isomers eluted within about one minute, respectively. Hence it is possible, that the peak clusters identified may be composed of more, co-eluting congeners. Similarities in the GC/ECNI-MS mass spectra with polychlorinated biphenyls (PCBs) were addressed. We also suggest an acronym system similar to that in use for polychlorinated biphenyls that may simplify the use of this substance class in scientific papers. In the samples from Australia, BrCl6-MBPs and Br2Cl5-MBPs amounted for 7-27.5% and 0.4-4.2% of Q1, respectively whereas Br3Cl4-MBPs and higher brominated MBPs were found in the range of <1% of Q1 or less.     

Analysis of halogenated polycyclic aromatic hydrocarbons in urban air, snow and automobile exhaust

Urban air, snow and automobile exhaust samples were extensively cleaned up by open column liquid chromatography. The appropriate fractions were analysed for halogenated polycyclic aromatic hydrocarbons (XPAH) by gas chromatography/negative chemical ionization mass spectrometry (GC/NCIMS). XPAH were found in all three sample types. A urban air sample was found to contain chlorinated pyrenes, fluoranthenes and benzopyrene and brominated pyrenes and fluoranthenes. Furthermore, the concentration of 1-chloropyrene in that air sample was estimated to be 10 pg/m³. XPAH were also found in snow samples taken in the vicinity of a motor-way. Ethylene dibromide and ethylene dichloride, are probably the source of the halogen atoms in the XPAH detected in car exhaust.     

Surface catalyzed halogenation-dehalogenation reactions of aromatic bromine compounds adsorbed on fly ash

Brominated aromatic compounds like brominated benzenes, diphenylethers and dibenzodioxins adsorbed on the surface of fly ash from a municipal waste incininerator give mixed brominated/chlorinated und completely chlorinated aromatic compounds. These consecutive halogenation-dehalogenation reactions proceed by a nucleophilic mechanism, which is favoured by a high concentration of chloride on the fly ash. Results of kinetic and stereoselective behavior of these reactions will be discussed. The relevance of these results for PCDD/PCDF formation from bromine precursors in municipal waste incinerators will be discussed.     

Acute oral toxicity and liver oxidant/antioxidant stress of halogenated benzene, phenol, and diphenyl ether in mice: a comparative and mechanism exploration

The lethal doses (LD₅₀s) of fluorinated, chlorinated, brominated, and iodinated benzene, phenol, and diphenyl ether in mice were ascertained respectively under the consistent condition. The acute toxicity of four benzenes orders in fluorobenzene (FB)?<?iodobenzene?<?chlorobenzene≈bromobenzene, that of four phenols orders in 4-iodophenol≈4-bromophenol?<?4-chlorophenol (4-MCP)?<?4-fluorophenol (4-MFP), and that of four diphenyl ethers orders in 4,4′-iododiphenyl ether?<?4,4′-difluorodiphenyl ether?<?4,4′-dichlorodiphenyl ether≈4,4′-dibromodiphenyl ether. General behavior adverse effects were observed, and poisoned mouse were dissected to observe visceral lesions. FB, 4-MCP, and 4-MFP produced toxic faster than other halogenated benzenes and phenols, as they had lower octanol–water partition coefficients. Pathological changes in liver and liver/kidney weight changes were also observed. Hepatic superoxide dismutase, catalase activities, and malondialdehyde level were tested after a 28-day exposure, which reflects a toxicity order basically consistent with that reflected by the LD₅₀s. By theoretical calculation and building models, the toxicity of benzene, phenol, and diphenyl ether were influenced by different structural properties.     

Halogenated aromatics from steel production: results of a pilot-scale investigation

The potential environmental impact of emissions of halogenated aromatics from the steel industry is of growing concern. It has been suggested that electric arc furnaces are the only industrial source with constant or increasing emissions of dioxins to air. Here the results are reported from a pilot plant study on how scrap composition and various treatment alternatives affect the formation and release of chlorinated and brominated aromatics. The experiments were conducted with a statistical mixture design, and it is shown that scrap composition has a significant impact on the outcome. In contrast, the various treatment schemes examined--shredding, disassembly, and briquetting--did not affect the formation and release of halogenated aromatics. Parallel experiments with injection of adsorbents showed that it is possible to reduce emissions without substantial investments, and this option is recommended as a low-cost solution.     

Expanding the range of halogenated 1'-methyl-1,2'-bipyrroles (MBPs) using GC/ECNI-MS and GCxGC/TOF-MS

Halogenated 1'methyl-1,2'-bipyrroles (MBPs) have been identified worldwide in marine mammals. Here we present the tentative identification of previously undetected MBP congeners in Delpinus delphis blubber using gas chromatography/electron capture negative ion mass spectrometry (GC/ECNI-MS) and comprehensive two-dimensional gas chromatography/time of flight mass spectrometry (GCxGC/TOF-MS). This is the first report of 26 congeners. The presence of numerous partially halogenated congeners suggests that they are either biosynthesized concomitantly with their perhalogenated counterparts or that their dehalogenation products can also bioaccumulate. The newly found compounds fit the geographic trend that has been previously noted. That is, samples from the Atlantic Ocean are dominated by the more brominated congeners while those from the Pacific are dominated by the more chlorinated congeners.     

Predicting logarithmic values of the subcooled liquid vapor pressure of halogenated persistent organic pollutants with QSPR: How different are chlorinated and brominated congeners?

Logarithmic values of the subcooled liquid vapor pressure (log P_L) were estimated for 1436 polychlorinated and polybrominated congeners of benzenes, biphenyls, dibenzo-p-dioxins, dibenzofurans, diphenyl ethers and naphthalenes by employing the Quantitative Structure–Property Relationships (QSPR) approach. The QSPR model developed with GA–PLS technique was characterized by satisfactory goodness-of-fit, robustness and the external predictive performance (R²Y = 0.970, Q_CV² = 0.970, Q_Ext² = 0.966, RMSE_C = 0.21, RMSE_CV = 0.22 and RMSE_P = 0.22). The externally validated model has been applied to predict subcooled liquid vapor pressure of uninvestigated halogenated persistent organic pollutants. Moreover, a simple arithmetic relationship between logarithmic values of subcooled liquid vapor pressures in pairs of chloro- and bromo-analogues has been found. This relationship can be used for estimating log P_L of a brominated compound, whenever log P_L of its chlorinated counterpart is known, without necessity of performing any time-consuming computations.     

Effects of bromide and iodide ions on the formation of disinfection by-products during ozonation and subsequent chlorination of water containing biological source matters

This study aims to investigate the influence of the coexistence of halogen ions (bromide/iodide) and biological source matters on the speciation and yield of trihalomethanes (THMs), haloacetic acids (HAAs), and N-nitrosodimethylamine (NDMA) during the ozonation and subsequent chlorination of water. The results show that the concentrations of brominated THMs and iodinated THMs increased with increasing bromide and iodide concentration. These results may be attributed to the higher reactivity of hypobromous acid and hypoiodous acid generated from the ozonation and subsequent chlorination in the presence of bromide or iodide ions. The presence of bromide increased the species of brominated HAAs. There was a shift from chlorinated HAAs to brominated HAAs after increasing the concentration of bromide. The effect of iodide on HAA formation was more complex than bromide. For most samples, the concentration of total HAAs (T-HAAs) increased to the maximum and then decreased with increasing iodide concentration. The components of the organic precursors also significantly influenced the formation of brominated and iodinated disinfection by-products (Br-DBPs and I-DBPs). Humic acids produced more CHBr₃ (596.60 μg/L) than other organic materials. Microcystis aeruginosa cells produced the most tribromoacetic acid (TBAA, 84.16 μg/L). Furthermore, the yield of NDMA decreased with increasing bromide concentration, indicating that the formation of NDMA was inhibited by the high concentration of bromide.     

Non-polar halogenated natural products bioaccumulated in marine samples. II. Brominated and mixed halogenated compounds

Several identified and potential natural brominated bioaccumulative compounds were studied in this work. 4,6-dibromo-2-(2('),4(')-dibromo)phenoxyanisole (BC-2) previously detected in Australian marine mammals and isolated from sponges, was synthesized. Two byproducts (a tetrabromo isomer and a tribromo congener) were investigated as well. The byproducts of the synthesis were not identified in the environmental samples investigated. Previously described natural brominated compounds (BC-1, BC-2, BC-3, BC-10, BC-11, MHC-1) and anthropogenic brominated diphenyl ethers (BDE-47, BDE-99, BDE-100, BDE-154) were detected in a sample of human milk. The sample was from a woman from the Faeroe Islands who frequently consumed fish as well as whale blubber and meat. The most abundant compound originated from the natural tetrabromo phenoxyanisole BC-3 which may have a 3:1 distribution of bromine on the two phenyl units. This sample also accumulated a dibromochloroanisole, as well as a previously unknown mixed halogenated compound (MHC-X) and an unknown, most likely aromatic brominated compound. Co-elutions on a DB-5 column were found for BDE-99 and BC-11 as well as BDE-154 and the unknown brominated compound. This suggests that quantification of these two compounds has to be carried out carefully.Two samples of lower trophic level, namely Baltic cod liver and Mexican mussel tissue, were investigated as well. The cod liver samples contained BDE congeners but also abundant signals for the natural 2,3,3('),4,4('),5,5(')-heptachloro-1(')-methyl-1,2(')-bipyrrole Q1 and tribromoanisole (TBA). The mussel sample contained Q1, TBA, another halogenated anisole, BC-1, BC-2, and BC-3, as well as additional, potential natural brominated compounds in the elution range of tribromophenoxyanisoles.     

Fate of PBDEs during food processing: Assessment of formation of mixed chlorinated/brominated diphenyl ethers and brominated dioxins/furans

The aim of this study was to evaluate effects of food processing on PBDE levels, in particular influence of heat treatment on degradation of PBDEs, including possible formation of chlorinated diphenyl ethers or brominated dioxins/furans as degradation products. It was shown that PBDEs heated in the presence of chlorine (from either organic or inorganic sources) formed mixed chlorinated/brominated diphenyl ethers. However, no PCDEs were formed in the presence of lipids. Lipid medium increased stability of PBDEs exposed to UV irradiation. Profile of congeners formed in result of the debromination reaction was significantly different than profiles observed by some other authors in aliphatic organic solvents. Grilling processes increased concentrations (calculated on the fresh product basis) of the studied compounds by 4–8/22–34% for electric/coal grill, respectively. Depending on the congener and on the applied heat treatment, PBDE mass in pork meat after grilling dropped by 26–53%. No detectable quantities of either brominated dioxins or furans were formed during thermal processing of food containing typical levels of PBDEs.     

Assessment of PCDD/F and PBDD/F emissions from coal-fired power plants during injection of brominated activated carbon for mercury control

The effect of the injection of brominated powdered activated carbon (Br-PAC) on the emission of brominated and chlorinated dioxins and furans in coal combustion flue gas has been evaluated. The sampling campaigns were performed at two U.S. Department of Energy (DOE) demonstration sites where brominated PAC was being injected for control of mercury emissions. The results of the sampling campaigns showed that injection of the brominated PAC upstream of the electrostatic precipitator (ESP) did not increase the emissions of total and Toxic EQuivalent (TEQ) chlorinated and brominated dioxin compounds. Rather, the data suggested the sorbent may capture these compounds and reduce their concentration in the flue gas stream. This effect, when seen, was small, and independent of the type of plant emission controls, temperature at the point of injection, or fuel-chlorine content. The addition of the brominated PAC sorbent resulted in slight increases the total content of chlorinated dioxins and furan in the particulate matter (ash) collected in the ESP, but did not increase its overall toxicity.     

Dual mechanochemical immobilization of heavy metals and decomposition of halogenated compounds in automobile shredder residue using a nano-sized metallic calcium reagent

Simultaneous immobilization of heavy metals and decomposition of halogenated organic compounds in different fractions of automobile shredder residue (ASR) were achieved with a nano-sized metallic calcium through a 60-min ball milling treatment. Heavy metal (HM) immobilization and chlorinated/brominated compound (CBC) decomposition efficiencies both reached 90–100 %, after ball milling with nanometallic calcium/calcium oxide (Ca/CaO) dispersion, regardless of ASR particle size (1.0, 0.45–1.0, and 0.250 mm). Concentrations of leachable HMs substantially decreased to a level lower than the regulatory standard limits (Co and Cd 0.3 mg L⁻¹; Cr 1.5 mg L⁻¹; Fe, Pb, and Zn 3.0 mg L⁻¹; Mn and Ni 1 mg L⁻¹) proposed by the Korean hazardous waste elution standard regulatory threshold. Scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS) element maps/spectra showed that while the amounts of HMs and CBCs detectable in ASR significantly decreased, the calcium mass percentage increased. X-ray powder diffraction (XRD) patterns indicate that the main fraction of enclosed/bound materials on ASR includes Ca-associated crystalline complexes that remarkably inhibit HM desorption and simultaneously transform dangerous CBCs into harmless compounds. The use of a nanometallic Ca/CaO mixture in a mechanochemical process to treat hazardous ASR (dry conditions) is an innovative approach to remediate cross-contaminated residues with heavy metals and halogenated compounds.

     

Analysis of mixed halogenated dibenzo-p-dioxins and dibenzofurans (PXDD/PXDFs) in soil by gas chromatography tandem mass spectrometry (GC-MS/MS)

Mixed halogenated dibenzo-p-dioxins and dibenzofurans (PXDD/PXDFs, X = Br, Cl) are formed through combustion processes, and may be more toxic than their corresponding chlorinated and brominated analogues. With 4600 potential congeners, limited analytical standards, and complex environmental matrices, PXDD/PXDFs present a significant analytical challenge. Gas chromatography tandem mass spectrometry (GC-MS/MS) offers both selectivity and sensitivity through multiple reaction monitoring of unique transitions in a novel approach to PXDD/PXDF congener identification. Method validation was performed through analysis of soil samples obtained from a recycling plant fire. Of the PXDD/PXDFs examined, monobromo-dichlorodibenzofuran was the most prevalent, ranging in concentration from 8.6 ng g⁻¹ to 180 ng g⁻¹. Dibromo-dichlorodibenzo-p-dioxin, a compound of toxicological concern, ranged from 0.41 ng g⁻¹ to 10 ng g⁻¹. Concentrations of PXDD/PXDFs were between 6% and 10% that of the corresponding polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDFs), with the exception of dibromo-dichlorodibenzo-p-dioxin concentrations, which were 36% that of tetrachlorodibenzo-p-dioxins. Higher levels of polybrominated PXDD/PXDFs may indicate a significant bromine source was present during combustion.     

Halogenated diphenyl ethers identified in avian tissues and eggs by GC/MS

Chlorinated and brominated diphenyl ether compounds (DPEs) have been detected by gas Chromatography/ mass spectrometry (GC/MS) in eggs and carcasses of fish-eating birds from Louisiana, Michigan, Ohio, Rhode Island, Texas, Virginia, and Ontario, Canada. Three of these compounds were quantified; the highest concentration of 0.90 ppm tetrachloro DPE was found in a common tern carcass ( ) from Rhode Island. This is the first time that the halogenated DPEs have been reported in avian tissues. The significance of these residues is unknown.     

A standardized method for assessment of oxidative transformations of brominated phenols in water

The term persistence has been used to confusion since it is used as a conceptual parameter without a uniform definition. Work is therefore being done in order to unite ideas and describe persistence based on the chemical reactivity and chemico-physical properties of compounds via investigation of the main degradation pathways in the environment; photolysis, hydrolysis-substitution-elimination (hse), oxidation, reduction and radical reactions. The present work is focused on developing a method to determine oxidative degradation rates of chemicals and thereby measurement of their susceptibility to undergo oxidation reactions. The method based on potassium permanganate works well for water soluble compounds and is easy, robust, inexpensive and reproducible. By using the method and varying the analysed substances, the degradation rates for brominated phenols, two chlorinated phenols and high volume production compounds such as tetrabromobisphenol A (TBBPA), tetrachlorobisphenol A (TCBPA) and bisphenol A (BPA) have been determined at pH 7.6+/-0.2. The reaction rates of the two halogenated BPA's are particularly fast, giving half-lives in seconds. The other test compounds have slower reaction rates but easily measured under the reaction conditions applied. The reactions are temperature dependent. There is evidence that pK(a) and the substitution pattern of the halogens affects the rate of the reactions. The method is robust and applicable for reaction rate constant measurements of present and potential future environmental contaminants.     

Formation of halogenated acetaldehydes, and occurrence in Canadian drinking water

Controlled laboratory chlorination of acetaldehyde (ACD) under typical drinking water conditions (pH 6.7, 7.6 and 8.8, and temperature 4 degrees C and 21 degrees C) revealed that the formation of chloral hydrate (CH), the most common halogenated acetaldehyde (HAs), increased with contact time (0-10 days). However, at increased pH and temperature, CH reached maximum levels and subsequently broke down partially to chloroform and other unidentified compounds. After 10 days contact time, a maximum of 63% (molar) of the initial ACD consumed were converted into CH or chloroform (TCM). Various surveys of drinking water systems indicated that ACD is not the only precursor of CH. A suite of aldehydes (including ACD), and chlorinated disinfection by-products (including TCM and CH) were found in most distribution systems. The levels of bromide in source water impacted speciation of HAs. In addition to CH, brominated and other mixed (Cl/Br) acetaldehydes were detected in most samples; the speciation of HAs and THMs followed comparable trends. Similar to chloroform for trihalomethanes, CH contributed from as low as 5% to up to 60% of the total HAs. The bromine incorporation factors (BIF) in THMs and HAs were shown to increase with increasing bromide ion concentrations in the source water. Brominated THMs are more readily formed than their HA analogues; in fact, BIF values for THMs were 2-3 times higher than for the HAs. It was found that HAs may be as high as THMs in some drinking waters. As a result, the determination of the other target HAs, in addition to CH, is necessary for a better assessment of the pool of disinfection by-products in drinking water.