共查询到20条相似文献,搜索用时 281 毫秒
1.
有机废气治理技术的研究进展 总被引:4,自引:0,他引:4
有机废气治理问题是当前废气处理的难点问题之一。本文首先介绍了几类传统有机废气处理技术的发展现状,包括吸附法、吸收法、催化氧化法、生物处理法等。对这几类有机废气治理技术的应用机理、适用范围以及现存问题进行了综合地比较与分析。最后,对于近年来出现的几类新型有机废气处理技术,如膜分离法、光催化氧化法、综合处理法的发展前景进行了一定的展望并列举了几类新技术的工程应用实例。 相似文献
2.
《中国环境管理干部学院学报》2017,(1)
本研究对当前氯霉素废水处理技术的应用和研究状况进行了综述,目前处理氯霉素废水的方法主要包括吸附法、萃取法、电化学法、氧化法、还原法等物理化学方法和生物方法,这些方法降解效率较高,但具有能源消耗高以及二次污染等缺点。生物法与电化学法的联用是一种处理效率高且成本低的新技术,成为研究降解氯霉素废水的热点。 相似文献
3.
黑臭水体治理的技术路线目前有多种选择,生物接触氧化法是其中一种较为成熟的对氨氮有明显去除效果的工艺。以合肥某河道的水质提升项目为例应用这一方法,并且通过项目实施前后工艺的合理搭配,稳定满足水环境治理需求。 相似文献
4.
原位修复是一种可靠、卓有成效的河道水体净化修复技术,具有治理费用低和最大程度降解污染的特点,适合于污染严重、流量较小的河流水体。本文概述了河道曝气法、生物接触氧化、河流湿地处理和生态浮床等河道原位处理技术的原理、发展及应用情况,其中河道曝气和生物接触氧化起步早,技术较为成熟,为早期污染水体治理贡献很大,相对河流湿地处理和人工浮床起步晚,但成本低,耗资少,处理效率又高,具有很大的发展空间。这些工艺都是经济、有效以及符合可持续发展要求的生物生态技术,在国内外发展比较迅速,但在进一步改进的前提下,其应用前景将十分广阔。 相似文献
5.
针对页岩气压裂返排废液治理的难题,文章根据浙江油田公司现状,介绍了微电解法、生物法、固化法、混凝法、催化氧化法、过滤吸附法等国内常规压裂返排液处理的主要方法,根据实际情况,确定pH值调节、混凝沉淀、Fenton氧化、二次混凝、反渗透等处理工艺。同时进行了处理方法的改进探索,自建污水撬装装置,可以就地集中处理,并对下一步处理工艺的优化改进进行探讨,提出基于超微滤膜和反渗透工艺的改进方案。 相似文献
6.
本文着重介绍制革废水处理中,经分隔治理,再采用生物接触氧化和气浮工艺的实际应用,运行效果良好。其中生化级采用生物接触氧化单元是新的尝试,为同类废水的处理积累了一定的经验。 相似文献
7.
8.
氧化法预处理垃圾渗滤液技术研究及应用 总被引:3,自引:0,他引:3
由于垃圾渗滤液含有多种有毒有害的难降解的有机物,影响了生物处理效果。采用Fenton氧化法、湿式催化氧化法和电解氧化法预处理,可减少渗滤液的污染负荷,提高可生化性,在实际应用中取得良好的效果。 相似文献
9.
催化过氧化氢氧化法(CWPO)是一种有效处理难降解废水的新技术。本文介绍了均相催化、非均相催化及酶催化过氧化氢氧化法在难降解有机废水处理中的应用,探讨了各种因素对CWPO法处理效果的影响,对CWPO技术的研究方向和发展前景作了展望。 相似文献
10.
11.
海上溢油回收技术研究及发展 总被引:3,自引:0,他引:3
论述了厌氧-好氧(A/O)工艺的基本原理及工艺参数。该工艺在冀东油田两座废水处理站的应用结果表明,对废水中石油类物质、COD、硫化物去除效果明显。高一联合站及柳一联合站污水经处理后,石油类物质去除率分别为90.6%和96.0%;COD去除率分别为86.0%和91.6%;硫化物去除率分别为94.8%和98.2%,处理后的污水均达到一级排放标准。另外,采用厌氧-好氧工艺的成本相对较低,处理费用低于0.5元/m3。处理后的污水若回注地下,平均费用为4.7元/m3。 相似文献
12.
城市垃圾渗滤液处理技术发展现状 总被引:3,自引:0,他引:3
介绍了城市垃圾渗滤液的来源和特点,根据近些年的工程实际和实验研究结果,主要论述了垃圾渗滤液的处理方案和处理技术,包括回灌法、土地处理法、物理化学法、生物法等。对这些处理方法进行了比较,在此基础上提出了相应的建议。 相似文献
13.
海上溢油回收技术研究 总被引:4,自引:0,他引:4
论述了厌氧-好氧(A/O)工艺的基本原理及工艺参数。该工艺在冀东油田两座废水处理站的应用结果表明,对废水中石油类物质、COD、硫化物去除效果明显。高一联合站及柳一联合站污水经处理后,石油类物质去除率分别为90.6%和96.0%;COD去除率分别为86.0%和91.6%;硫化物去除率分别为94.8%和98.2%,处理后的污水均达到一级排放标准。另外,采用厌氧-好氧工艺的成本相对较低,处理费用低于0.5元/m3。处理后的污水若回注地下,平均费用为4.7元/m3。 相似文献
14.
15.
16.
John A. Robertson Alex W. Thomas Julien Modolo Jodi Miller Nicole Juen Alexandre Legros Frank S. Prato 《The Environmentalist》2011,31(2):134-139
The field of bioelectromagnetics, consisting of the study of the interaction between electromagnetic fields and biological
systems, has been rapidly expanding in the recent years. One important factor that contributes importantly to the development
of this field is the continuing advances in technology allowing researchers to investigate different endpoints, or to more
precisely measure changes, if any. Hybrid functional imaging is a rapidly maturing field that opens new, important horizons
for bioelectromagnetics research. Indeed, unraveling the interaction mechanisms of electromagnetic fields on biological systems
(with an emphasis on the brain) requires a monitoring of electrical, functional, and metabolic activity of living tissue at
different temporal and spatial scales. Individual tools (e.g., electroencephalography, EEG; functional magnetic resonance
imaging, fMRI) are limited in their ability to detect the effects of electromagnetic interaction at specific temporal and
spatial scales, so combining these imaging methods offers a unique opportunity to provide a more comprehensive view of effects
in living tissue. In this paper, we will present the different imaging techniques that are available to bioelectromagnetics
researchers, including their capabilities and how they are complemented by simultaneous hybrid imaging. Future possibilities
of hybrid imaging technologies are discussed. 相似文献
17.
18.
19.
20.
The useful life of consumer electronic devices is relatively short, and decreasing as a result of rapid changes in equipment features and capabilities. This creates a large waste stream of obsolete electronic equipment, electronic waste (e-waste).Even though there are conventional disposal methods for e-waste, these methods have disadvantages from both the economic and environmental viewpoints. As a result, new e-waste management options need to be considered, for example, recycling. But electronic recycling has a short history, so there is not yet a solid infrastructure in place.In this paper, the first half describes trends in the amount of e-waste, existing recycling programs, and collection methods. The second half describes various methods available to recover materials from e-waste. In particular, various recycling technologies for the glass, plastics, and metals found in e-waste are discussed. For glass, glass-to-glass recycling and glass-to-lead recycling technologies are presented. For plastics, chemical (feedstock) recycling, mechanical recycling, and thermal recycling methods are analyzed. Recovery processes for copper, lead, and precious metals such as silver, gold, platinum, and palladium are reviewed. These processes are described and compared on the basis of available technologies, resources, and material input–output systems. 相似文献