Organic–Inorganic Hybrid Coatings for the Modification of Barrier Properties of Poly(lactic acid) Films for Food Packaging Applications

Organic–inorganic hybrid coatings based on poly(ε-caprolactone), poly(ethylene oxide) or poly(lactic acid) as organic phase and silica from tetraethoxysilane as inorganic phase were prepared by the sol–gel approach. Coatings were applied onto poly(lactic acid) films for food packaging in order to improve its barrier properties towards oxygen and water vapour. All the prepared coatings were dense, homogeneous layers characterized by a good adhesion to the substrate. The permeance of the coating layers resulted one order of magnitude lower than that of the uncoated poly(lactic acid) (PLA) film. The hydrophilic character of the coating did not permit to gain a significant decrease in the water vapour permeance. The perfect visual transparency of the coatings allows their application without worsening of the esthetical properties of the substrate PLA film.     

Selection of palm oil mill effluent treatment for biogas generation or compost production using an analytic hierarchy process

Palm oil mill effluent (POME) is the liquid waste from palm oil mills, and is generally treated using open lagoon technology. However, open lagoons can also be combined with more environmentally friendly technologies. In this study, the analytic hierarchy process (AHP) was used to determine the best combination open lagoon of technology (COLT) for POME treatment. The selected criteria were benefit, opportunity, risk, and cost, with sub-criteria further determined based on these criteria. The sub-criteria were revenue, greenhouse gas reduction, employment absorption, corporate social responsibility, co-processing, environmental risk, marketing risk, technology reliability, investment cost, operation and maintenance cost, and opportunity cost. The alternatives were COLT-composting for fertilizer purpose and COLT-biogas for energy generation purpose. Calculation and analysis was performed on questionnaire data using Expert Choice^®. COLT-composting proved to be the superior COLT using tentative performance of alternative in this research, with advantages in benefit, opportunity, and risk. The priority weight for COLT-composting was 0.636. Sensitivity analysis was performed by changing criteria priorities. For COLT-biogas to be considered better than COLT-composting, the cost would need to be weighted more than 0.954.     

Inulin–Niacin Conjugates: Preparation,Characterization, Kinetic and In Vitro Release Studies

Journal of Polymers and the Environment - Niacin, an essential B-complex vitamin, used in the treatment of nonalcoholic fatty liver disease is the first perceived lipid regulating medication,...     

Degradation of Starch–Calcium Carbonate Disposable Packaging in a Solid Waste Composting Facility

The compostability of starch–CaCO₃ disposable packaging was examined in a source-separated municipal solid waste (MSW) composting facility located in East Hampton, NY. Source-separated MSW:starch–CaCO₃ container mixtures of 0 (control), 5, and 20% (by volume) were prepared as feedstock for composting. Compost samples were collected weekly or biweekly during the composting process and examined for fragments of the starch–CaCO₃ containers. Changes in compost quality due to the presence of starch–CaCO₃ containers were assessed by measuring the nutrient and metal content of the three resultant MSW:starch–CaCO₃ composts. Finally, plant growth studies were conducted to examine the composts for possible plant growth inhibition due to the deterioration of the starch–CaCO₃ containers. Results showed that portions of the starch–CaCO₃ containers were not identified in any of the 5 and 20% sieved and characterized compost fractions > 1.3 cm following 1–3 weeks of composting. Mechanical agitation of the waste along with optimum composting conditions were sufficient to initiate the rapid degradation of the starch–CaCO₃ composites. Degradation of starch–CaCO₃ containers did not affect compost nutrient and trace element content. Grass biomass measurements were performed once weekly over 28 days for grass grown in control (0%), 5%, and 20% starch–CaCO₃-containing compost:soil mixtures. Significant differences in grass biomass for these compost:soil mixtures were measured only for the 0 and 20% starch–CaCO₃-containing compost:soil mixtures at 28 days (9.07 vs 11.05 g, respectively; P = 0.046).     

Effect of Glycerol on the Properties of 100 % Biodegradable Thermoplastic Based on Wheat Flour

This paper reports the effect of glycerol on thermal, mechanical and morphology of the wheat-flour based thermoplastic sheets (<3 mm) fabricated using single screw extrusion followed by compression molding. The amount of glycerol (plasticizer) added during the formulation varies from 20 to 35 % w/w (20, 23, 25, 30 and 35 % w/w). Results indicate that increase in the amount of glycerol in the starch based thermoplastic sheets, lowers its hardness and tensile properties while an increase in the melt flow index. Variation in the glycerol content from 20 to 25 % w/w increases the impact strength of the thermoplastic sheets beyond this limit it decreases. The contact angle analysis shows that glycerol has effect on the surface energy and work of adhesion of the thermoplastic sheets. However, the presence of glycerol has no significant influence on the thermal stability of thermoplastic sheets above 200 °C.     

Recycling of the hyperaccumulator Brassica juncea L.: synthesis of carbon nanotube-Cu/ZnO nanocomposites

The methods of synthesizing carbon nanotube (CNTs)-Cu/ZnO nanocomposites using a Cu hyperaccumulator (Brassica juncea L.) constitute a new insight into the recycling of hyperaccumulators and provide a new route for the further development of green nanostructure syntheses. In this paper, CNTs-Cu/ZnO nanocomposites have been synthesized using B. juncea plants as the sources of C, Cu, and Zn. The synthesized CNTs-Cu/ZnO nanocomposites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectra (EDS). The synthesized CNTs were characterized further by selected area diffraction (SAD) patterns and Raman spectroscopy. The results demonstrated that the structure of individual CNTs was middle-hollow, with an outer diameter of about 80 nm. The synthesized CNTs were not at all crystalline and there were a few defects in the walls. The outer diameter of CNTs-Cu/ZnO nanocomposites was 110 nm. The diameters of Cu/ZnO nanoparticles were 29.5/32.7 nm, respectively. Cu/ZnO nanoparticles that had grown onto the CNT surface were nonuniform and agglomerated. The Cu/ZnO nanoparticles were pure.     

Screening tests for hazard classification of complex waste materials – Selection of methods

In this study we describe the development of an alternative methodology for hazard characterization of waste materials. Such an alternative methodology for hazard assessment of complex waste materials is urgently needed, because the lack of a validated instrument leads to arbitrary hazard classification of such complex waste materials. False classification can lead to human and environmental health risks and also has important financial consequences for the waste owner. The Hazardous Waste Directive (HWD) describes the methodology for hazard classification of waste materials. For mirror entries the HWD classification is based upon the hazardous properties (H1–15) of the waste which can be assessed from the hazardous properties of individual identified waste compounds or – if not all compounds are identified – from test results of hazard assessment tests performed on the waste material itself. For the latter the HWD recommends toxicity tests that were initially designed for risk assessment of chemicals in consumer products (pharmaceuticals, cosmetics, biocides, food, etc.). These tests (often using mammals) are not designed nor suitable for the hazard characterization of waste materials. With the present study we want to contribute to the development of an alternative and transparent test strategy for hazard assessment of complex wastes that is in line with the HWD principles for waste classification. It is necessary to cope with this important shortcoming in hazardous waste classification and to demonstrate that alternative methods are available that can be used for hazard assessment of waste materials. Next, by describing the pros and cons of the available methods, and by identifying the needs for additional or further development of test methods, we hope to stimulate research efforts and development in this direction. In this paper we describe promising techniques and argument on the test selection for the pilot study that we have performed on different types of waste materials. Test results are presented in a second paper.As the application of many of the proposed test methods is new in the field of waste management, the principles of the tests are described. The selected tests tackle important hazardous properties but refinement of the test battery is needed to fulfil the a priori conditions.     

Sink–float density separation of post-consumer plastics for feedstock recycling

The paper focuses on current mechanical waste processing technologies and out-of-the-box processes linked to the processing of coal and mineral resources, to ensure high-quality feedstock recycling of polyolefin-rich post-consumer plastic fractions. Moreover, the study aims to provide the basis for the technical and economic feasibility of the chemical recycling route of this plastic fraction. When evaluating common mechanical processes, either dry or wet ones, sink–float separation in a cylindrical centrifugal force separator achieves the best results. It combines the advantages of a simple, robust apparatus of low complexity and high capacity with selective separation through the accelerated settling of particles in the centrifugal field. Furthermore, the disconnection of the separation medium feed from the solid input increases residence times. Based on the above findings, a pilot-scale plant was constructed which consists of a centrifugal force separator and a hydro jig for the pre-separation of heavy waste components. Several test campaigns were conducted to separate polyolefins from various waste fractions. Two-stage processing in the centrifugal force separator rendered almost 90 wt% of polyolefin content in the produced lightweight fraction and of polyolefin recovery. One-stage processing, on the other hand, resulted in reduced polyolefin content in the lightweight fraction.

     

Design and Characterization of PVA–Methacrylic Acid Based Smart Polymeric System for Controlled Release of Metoprolol

In the present work covalently crosslinked smart polymeric system of hydrogel based on poly vinyl alcohol (PVA) and methacrylic acid (MA) was designed by free radical polymerization with different compositions using glyoxal (40 % water solution) as crosslinker. It was observed that swelling of hydrogel had a pronounced enhancing effect on increasing the concentration of MA due to availability of more ionized carboxylic groups of MA but produced an opposite effect on increasing the concentration of glyoxal owing to less porous structure. As far as PVA is concerned, swelling did not show significant effect on increasing the concentration of PVA. Hydrophilic polymer PVA rich in hydroxyl group pertained to be highly interactive with water. It was examined that the release of metoprolol tartrate decreased with increased concentration of glyoxal, but increased with increase in concentration of MA. PVA/MA hydrogel was characterized by Fourier transform infrared spectroscopy and X-ray diffraction to study the structure and crystallinity of hydrogel respectively. Morphology was studied through scanning electron microscopy. Furthermore differential scanning calorimetry and thermogravimetric analysis were also performed to characterize thermal stability. It may be concluded that the mechanism of drug release was mainly non-Fickian diffusion.     

DISCRISET: A battery of tests for fast waste classification – Application of tests on waste extracts

The Hazardous Waste Directive (HWD, Council Directive 91/689/EC, 1991) provides a framework for classification of hazardous waste, based on 15 Hazard (H)-criteria. For complex wastes the HWD foresees the application of toxicity tests on the waste material itself to assess its toxic properties. However, these proposed test methods often involve mammalian testing, which is not acceptable from an ethical point of view, nor is it feasible economically. The DISCRISET project was initiated to investigate the use of alternative chemical and biological fast screening tests for waste hazard classification. In the first part of the project, different methods were reviewed and a testing strategy was proposed to minimize time and cost of analysis by a tiered approach. This includes as a first tier chemical analysis followed by a general acute toxicity screen as a second tier and as a third tier mechanistic toxicity tests to assess chronic toxicity (genotoxicity, hormone disturbance, teratogenic effects, immunologic activity). In this phase of the project, selected methods were applied to 16 different waste samples from various sources and industries. The first tier chemical tests are recommended for the full characterization of the leachate fraction (inorganics) but not for the organic fraction of samples. Here the chemical characterization is only useful if toxic content is known or suspected. As second tier the fast bacterial test Microtox is validated as a general toxicity screen for the organic fraction (worst case organic extract). Samples that are not classified in tier 1 or 2 are then further investigated in the third tier by the mechanistic toxicity tests and tested for their potential chronic toxicity: immune activity (TNF-α upregulation) is indicative for corrosive, irritating or sensitising effects (H4/H8/H15), reproductive effects (H10) are indicated by hormone disturbance and early life stage abnormalities in fish larvae when exposed to the extracts and mutagenicity and carcinogenicity (H7, H11) are indicated by SOS response induction and increased mutation frequency in the Ames test when exposed to the extracts. Results indicate that the combination of chemical tests and bioassays allows important hazardous properties to be addressed and the tiered approach ensures that the tests are performed quickly and economically. The suggested strategy provides a solid and ethical alternative to the methods described in the HWD and is a vast improvement on the current, arbitrary classification.     

Dual Function of Cellulose Triacetate–Graft–Polymethacrylic Acid Films for Dyes Removal and for High-Dose Radiation Dosimetry

Graft copolymerization of methacrylic acid (MAc) onto cellulose triacetate (CTA) films was conducted by gamma rays. The grafting conditions were optimized. The structure of grafted CTA films was characterized by Fourier transform infra red–attenuated total reflection, scanning electron microscopy, thermal gravimetric analysis, CHNS/O microanalyzer and, surface area and porosity analyzer. The grafted CTA films were exploited in adsorption of ethyl violet (EV) and phenol red (PR) dyes. The adsorption capacity of the grafted CTA films was investigated at various variables. The adsorption isotherms and kinetic study were examined. Further, the dyed grafted CTA films were used in measurements of high dose radiation. The results indicate that the useful dose range extents up to 440 and 300 kGy for EV and PR, respectively. The effects of relative humidity during irradiation, shelf-life, pre- and post-irradiation storage in dark and indirect daylight conditions on dosimeters performance were investigated.     

Biodegradability and compostability of polymers—test methods and criteria for evaluation

The treatment of solid waste in controlled composting facilities is an important possibility for reducing garbage. Natural and synthetic polymeric materials can be used for many purposes, for example, as packaging materials, where compostability is required. A prerequisite for official regulations and the decision as to which materials may be composted is investigations on their biodegradability and the quality of the compost produced. Several standardization groups at the ISO, CEN, and DIN are developing definitions, test methods, and classification systems for differentiating compostable from noncompostable materials. The concept which will be standardized and used in Germany is described in detail. It includes characterization of the test material, determination of the biodegradability using laboratory tests such as simple aquatic batch tests and a controlled aerobic composting test, investigation of the disintegration of the test material in industrial or bench-scale composting facilities, and finally, chemical and ecotoxicological analysis of the compost produced.     

A Grey-Based Taguchi Approach for Characterization of Erosive Wear Phenomenon of Glass–Polyester Fly Ash Filled Composites

Fly ash is a solid waste generated in huge quantities from coal fired thermal power stations during the combustion of coal. In India, less than half of this is used as a raw material for concrete manufacturing and construction; the remaining is directly dumped on land side as land fill or simply piled up. Only a small fraction of it is used in development of high valued product. Due to environmental regulations, new ways of utilizing fly ash are being explored in order to safeguard the environment and provide useful ways for its utilization and disposal. With its richness in various metal oxides, it has tremendous potential to be utilized as a filler material in polymer composites. These days glass reinforced polyester composites find widespread application in erosive environment due to several advantages like high wear resistance, strength-to-weight ratio, and low cost. The cost of the composites can be further brought down using cheaper filler materials. To this end, this work uses fly ash in composite making and thereby suggests a new way of better utility of this industrial waste. It includes the processing, characterization and study of the erosion behavior of a class of such fly ash filled polyester-glass fiber composites. The engineering application of composites demands that it should have high wear resistance, low density and high tensile strength. In order to assess the behavior of composites satisfying multiple performance measures, a grey-based Taguchi approach has been adopted. After thorough analysis of factors, optimal factor settings have been suggested to improve multiple responses viz., erosive wear rate, density, flexural strength and tensile strength. This technique eliminates the need for repeated experiments; thus saves time and material. The systematic experimentation leads to determination of significant process parameters and material variables that predominantly influence the multiple responses.     

Status of waste tires’ recycling for material and energy resources in Taiwan

Journal of Material Cycles and Waste Management - Motor vehicles are indicative of transportation facilities in every country. In this regard, tires are important commodities of domestic and...     

Optimization of Eisenia fetida stocking density for the bioconversion of rock phosphate enriched cow dung–waste paper mixtures

Vermitechnology is gaining recognition as an environmental friendly waste management strategy. Its successful implementation requires that the key operational parameters like earthworm stocking density be established for each target waste/waste mixture. One target waste mixture in South Africa is waste paper mixed with cow dung and rock phosphate (RP) for P enrichment. This study sought to establish optimal Eisenia fetida stocking density for maximum P release and rapid bioconversion of RP enriched cow dung–paper waste mixtures. E. fetida stocking densities of 0, 7.5, 12.5, 17.5 and 22.5 g-worms kg^?1 dry weight of cow dung–waste paper mixtures were evaluated. The stocking density of 12.5 g-worms kg^?1 resulted in the highest earthworm growth rate and humification of the RP enriched waste mixture as reflected by a C:N ratio of <12 and a humic acid/fulvic acid ratio of >1.9 in final vermicomposts. A germination test revealed that the resultant vermicompost had no inhibitory effect on the germination of tomato, carrot, and radish. Extractable P increased with stocking density up to 22.5 g-worm kg^?1 feedstock suggesting that for maximum P release from RP enriched wastes a high stocking density should be considered.     

Standardization of BOD₅/COD ratio as a biological stability index for MSW

The control of biodegradable substances is the key issue in evaluating the short and long-term emission potential and environmental impact of a landfill.Aerobic and anaerobic indices, such as respirometric index (RI) and biomethane potential production (GB21), can be used in the estimation of the stability of solid waste samples.Previous studies showed different degrees of relationship between BOD₅/COD ratio compared with RI4.Aim of this study is to standardize the parameter BOD₅/COD ratio and to test the methodology under different operating conditions (dynamic or static leaching and leaching duration, 6 and 24-h) keeping constant temperature and liquid/solid ratio (L/S = 10 l/kg_TS), with the introduction of a COD fractioning method. The COD fractioning is based on the differentiation between the soluble fraction (COD_sol) and the colloidal fraction (COD_coll) using a flocculation method.The BOD₅/COD and the BOD₅/COD_sol indices are both consistent and significant and can be used as stability indices.The BOD₅/COD ratio does not seem to be influenced, for the same test duration, by the type of test, static or dynamic. In the same way the longer test duration (24-h) does not influence significantly the values of BOD₅/COD ratio. As a consequence a leaching test duration of 6-h is preferable to avoid the beginning of the hydrolysis and oxidation processes.     

The 1993 oil spill of Tampa Bay,a scenario for burning?

This viewpoint paper considers the potential of offshore burning of oil in the recent Tampa Bay spill as a generic oil spill response option. While the oil spilled might not have been amenable to burning, the physical constraints of the spill and subsequent environmental conditions provide a scenario for future consideration of this option.     

Review of LCA studies of solid waste management systems – Part II: Methodological guidance for a better practice

Life cycle assessment (LCA) is increasingly used in waste management to identify strategies that prevent or minimise negative impacts on ecosystems, human health or natural resources. However, the quality of the provided support to decision- and policy-makers is strongly dependent on a proper conduct of the LCA. How has LCA been applied until now? Are there any inconsistencies in the past practice? To answer these questions, we draw on a critical review of 222 published LCA studies of solid waste management systems. We analyse the past practice against the ISO standard requirements and the ILCD Handbook guidelines for each major step within the goal definition, scope definition, inventory analysis, impact assessment, and interpretation phases of the methodology. Results show that malpractices exist in several aspects of the LCA with large differences across studies. Examples are a frequent neglect of the goal definition, a frequent lack of transparency and precision in the definition of the scope of the study, e.g. an unclear delimitation of the system boundaries, a truncated impact coverage, difficulties in capturing influential local specificities such as representative waste compositions into the inventory, and a frequent lack of essential sensitivity and uncertainty analyses. Many of these aspects are important for the reliability of the results. For each of them, we therefore provide detailed recommendations to practitioners of waste management LCAs.