Effects of development time, biomass and ferromanganese oxides on nickel sorption by stream periphyton

Procedurally defined periphyton frequently includes substantial quantities of hydrous iron (Fe) and manganese (Mn) oxides. As these oxides are strong sorbers of heavy metals, their presence may complicate estimation of metal bioaccumulation by periphyton. We examined the relationship between nickel (Ni) sorption and the development time, biomass, and Fe and Mn oxide content of stream periphyton. Development time, the time during which periphyton accrued on submerged tile substrata, was used to provide variation in biomass, Fe and Mn levels. Stream periphyton from four development times was exposed to Ni for 2 h in the laboratory, and then ashed. Development time was significantly associated with ash-free dry mass (AFDM), Fe and Mn levels (ANOVA, P < or = 0.003). Ni extracted by a mild reductant (hydroxylamine hydrochloride) was significantly associated with development time, and with AFDM, Fe and Mn levels (linear models, P < or = 0.0002). A subsequent acid digestion yielded similar associations with the same variables (linear models, P < or = 0.0001). For both extractions, AFDM was significantly and positively correlated with Fe (r = 0.68 and 0.89) and with Mn (r = 0.77 and 0.93) (Spearman rank, P < or = 0.005). These data demonstrate the importance of periphyton development time in influencing both metal sorption and levels of biomass and ferromanganese oxides. The data also suggest that metal contaminant levels in periphyton should not be attributed automatically to biotic sorption. Periphyton metal-accumulation studies conducted where ferromanganese oxide concentrations are elevated should address the potential metal-sorbing roles of Fe and Mn oxides within the periphyton matrix.     

Sorption of pentachlorophenol on surficial sediments: the roles of metal oxides and organic materials with co-existed copper present

The sorption characteristics of pentachlorophenol (PCP) in the surficial sediments were investigated using a selective extraction procedure. The results show that the Gamma(max) of PCP sorption decreased from 1.60mumolg(-1) to 0.69mumolg(-1) by approximately 60% after selective removal of organic materials from the sediments. The sorption of PCP in the sediments after selective removal of Mn oxides increased nearly up to 600% (from 1.60mumolg(-1) to 11.11mumolg(-1)) and, to a less degree, the PCP sorption in the sediments after simultaneous removal of Fe/Mn oxides (Gamma(max)=3.53mumolg(-1)). The analysis of the data using an additional model indicates that the contribution of Mn oxides to PCP sorption was negative, and Fe oxides and organic materials both have greater potential for sorption of PCP with less contribution from residues including Mn and Fe oxides in the residual fractions determined by a sequential extraction procedure and clay and silicate minerals. The differences in the decreased degrees of PCP sorption with increasing of Cu suggest that competition between Cu and PCP for sorption sites mainly takes place on Fe oxides.     

Comparison of two reference black carbons using a planar PCB as a model sorbate

In studies assessing sorption of hydrophobic organic compounds (HOCs) in natural systems, the choice of an appropriate reference black carbon, which can represent environmental black carbon (BC), is essential. This study compared isotherms of two commonly available and distinct reference BCs (n-hexane soot (BCRM) and diesel particulate matter (SRM 2975)) and a natural sediment from a source with little black carbon (Lake Hartwell, SC) using 3,3',4-trichlorobiphenyl (IUPAC #35) as a model sorbate. There was greater sorptivity for PCB-35 by BCRM than by SRM 2975. The observed differences in sorption between the two reference black carbons for PCB-35 may be ascribed to the different chemical characteristics of the black carbons. Differences in pore volume distribution at <16A pore width are less likely to be responsible for the observed differences in sorption. The elemental analysis confirmed that BCRM was a pure n-hexane soot because only C, H and O were measured. In contrast, SRM 2975 also contained N and S and a higher O% than BCRM. Compared to the low BC sediment, the two reference BCs had greater pore volume distributions, surface areas, total pore volumes and sorption. The observed nF (i.e., Freundlich exponent) values for PCB indicated greater linearity of the isotherms for the natural sediment than for the reference black carbons. For designing studies of sorption of HOCs in natural systems, in particular, when PCBs are contaminants of concern, results of this study can aid selection of the appropriate reference BCs.     

Interaction of phenanthrene and its primary metabolite (1-hydroxy-2-naphthoic acid) with estuarine sediments and humic fractions

Experiments were conducted to compare the sorption and desorption of phenanthrene and its primary degradation product, 1-hydroxy-2-naphthoic acid (HNA), in estuarine sediment, humic acid (HA) and humin. Ionic composition, ionic strength (0.4 M) and pH (7.6) were employed to mimic native estuarine pore water at the sediment-water interface. Sorption to whole sediment and organic matter (OM) fractions was significantly lower for HNA than for phenanthrene. Whereas HNA did not sorb to HA, uptake to sediment and humin was observed, suggesting that HNA does not bind directly to OM. Phenanthrene uptake was characterized by hysteretic behavior and exhibited slow desorption. In contrast, HNA initially was more readily desorbed from sediment and humic fractions, but a significant fraction was not recovered in repeated desorption runs. The lower sorption of HNA reflects its greater polarity and water solubility, but the consistent retention of a non-desorbing fraction suggests strong binding and/or chemical transformation reactions may be important. It was postulated that abiotic transformation of HNA may occur in estuarine sediments, in part due to the presence of redox active minerals (Fe(III) and Mn(IV) oxides). The presence of Fe and Mn solids in the estuarine sediment was verified by sequential extraction and studies were then conducted to investigate the transformation of HNA in the presence of synthetic goethite (alpha-FeOOH) and birnessite (delta-MnO2) as model solids. Reaction with birnessite led to transformation of all HNA in solution within 24 h and resulted in the formation of partial oxidation products (POPs). Following reaction with goethite, HNA was present in solution and POPs were observed in the weakly bound fraction. This study indicates that degradation products of polycyclic aromatic hydrocarbons (PAHs) may have distinctly different sorption affinities and reactivities toward environmental surfaces than their parent compounds.     

Influence of soil properties on heavy metal sequestration by biochar amendment: 2. Copper desorption isotherms

Contaminant desorption constrains the long-term effectiveness of remediation technologies, and is strongly influenced by dynamic non-equilibrium states of environmental and biological media. Information is currently lacking in the influence of biochar and activated carbon amendments on desorption of heavy metal contaminants from soil components. In this study, copper sorption-desorption isotherms were obtained for clay-rich, alkaline San Joaquin soil with significant heavy metal sorption capacity, and eroded, acidic Norfolk sandy loam soil having low capacity to retain copper. Acidic pecan shell-derived activated carbon and basic broiler litter biochar were employed in desorption experiments designed to address both leaching by rainfall and toxicity characteristics. For desorption in synthetic rain water, broiler litter biochar amendment diminished sorption-desorption hysteresis. In acetate buffer (pH 4.9), significant copper leaching was observed, unless acidic activated carbon (pH_pzc = 3.07) was present. Trends observed in soluble phosphorus and zinc concentrations for sorption and desorption equilibria suggested acid dissolution of particulate phases that can result in a concurrent release of copper and other sorbed elements. In contrast, sulfur and potassium became depleted as a result of supernatant replacements only when amended carbon (broiler litter biochar) or soil (San Joaquin) contained appreciable amounts. A positive correlation was observed between the equilibrium aluminum concentration and initial copper concentration in soils amended with acidic activated carbon but not basic biochar, suggesting the importance of cation exchange mechanism, while dissolution of aluminum oxides cannot be ruled out.     

The kinetic stability of colloid-associated plutonium: settling characteristics and species transformation

The colloid-associated plutonium-239, as the dominant species of Pu in natural environment, was formed through sorption of Pu onto in situ colloids. In case of chemical perturbations present in pore water, the fate and transport of Pu would be therefore impacted by changes in sorption affinity of Pu for the colloid surfaces. The present study reveals that colloidal ²³⁹Pu exhibited the kinetic stability in two respects. First, in situ colloids isolated from the vadose zone sediments at Lop Nor, when in contact with solutions of high ion concentrations or low pH, were significantly aggregated and then exhibited fast settling. Kinetics settling characteristics were described by the parameters, including settling index and characteristic time. Second, Pu dissociation from colloid surfaces occurred immediately after the introduction of Na⁺. However, the dissolved species was still unstable and had the potential for re-association with the fraction of colloids that had not settled out from the suspensions due to small size and then remained in suspension. This implies that Pu sorption sites on initial colloids were changed to the sites of suspended colloids.     

The influence of organic matter on sorption and fate of glyphosate in soil - Comparing different soils and humic substances

Soil organic matter (SOM) is generally believed not to influence the sorption of glyphosate in soil. To get a closer look on the dynamics between glyphosate and SOM, we used three approaches: I. Sorption studies with seven purified soil humic fractions showed that these could sorb glyphosate and that the aromatic content, possibly phenolic groups, seems to aid the sorption. II. Sorption studies with six whole soils and with SOM removed showed that several soil parameters including SOM are responsible for the strong sorption of glyphosate in soils. III. After an 80 day fate experiment, ∼40% of the added glyphosate was associated with the humic and fulvic acid fractions in the sandy soils, while this was the case for only ∼10% of the added glyphosate in the clayey soils. Glyphosate sorbed to humic substances in the natural soils seemed to be easier desorbed than glyphosate sorbed to amorphous Fe/Al-oxides.     

Soil attenuation of As(III,V) and Se(IV,VI) seepage potential at ash disposal facilities

Leachate from ash landfills is frequently enriched with As and Se but their off-site movement is not well understood. The attenuation potential of As and Se by soils surrounding selected landfills during leachate seepage was investigated in laboratory column studies using simulated ash leachate. As(III, V) and Se(IV, VI) concentrations as well as pH, flow rate, and a tracer were monitored in influent and effluent for up to 800 pore volumes followed by sequential desorption, extraction, and digestion of column segments. Column breakthrough curves (BTCs) were compared to predictions based on previously measured sorption isotherms. Early As(V) breakthrough and retarded As(III) breakthrough relative to predicted BTCs are indicative of oxidative transformation during seepage. For Se(VI), which exhibits linear sorption and the lowest sorption propensity, measured BTCs were predicted fairly well by equilibrium sorption isotherms, except for the early arrival of Se(IV) in one site soil, which in part, may be due to higher column pH values compared to batch isotherms. Most of the As and Se retained by soils during leaching was found to be strongly sorbed (60–90%) or irreversibly bound (10–40%) with <5% readily desorbable. Redox potential favoring transformation to the more sorptive valence states of As(V) and Se(IV) will invoke additional attenuation beyond equilibrium sorption-based predictions. With the exception of Se(IV) on one site soil, results indicate that attenuation by down-gradient soils of As and Se in ash landfill seepage will often be no less than what is predicted by equilibrium sorption capacity with further attenuation expected due to favorable redox transformation processes, thus mitigating contaminant plumes and associated risks.     

Carbon and hydrogen isotope effects during sorption of organic contaminants on carbonaceous materials

Stable carbon and hydrogen isotopes can be an efficient means to validate biodegradation of organic contaminants in groundwater since it results in an isotopic fractionation. A prerequisite in applying this method in the field is the proof that other processes decreasing the contaminant concentration are conservative with respect to isotope effects. In this paper we show for carbon isotopes of halogenated hydrocarbon compounds [trichloroethene (TCE), cis-dichloroethene (c-DCE), vinylchloride (VC)] and carbon and hydrogen isotopes of BTEX compounds (benzene, toluene, p-xylene) that no significant fractionation occurs during equilibrium sorption onto activated carbon, lignite coke and lignite. In general, effects were in the range of the reproducibility limit of the analytical instrument (0.5 per thousand for delta13C, and 8 per thousand for delta2H). This observation was made for fractions sorbed of less than 5% to more than 95%. Also for rate-limited sorption of TCE onto activated carbon, no significant fractionation in carbon isotopes could be observed. These findings support the assumption that for these classes of compounds, sorption processes in aquifer systems are conservative with respect to isotope effects.     

Chromate transport through columns packed with surfactant-modified zeolite/zero valent iron pellets

Chromate transport through columns packed with zeolite/zero valent iron (Z/ZVI) pellets, either untreated or treated with the cationic surfactant hexadecyltrimethylammonium (HDTMA), was studied at different flow rates. In the presence of sorbed HDTMA, the chromate retardation factor increased by a factor of five and the pseudo first-order rate constant for chromate reduction increased by 1.5-5 times. The increase in rate constant from the column studies was comparable to a six-fold increase in the rate constant determined in a batch study. At a fast flow rate, the apparent delay in chromate breakthrough from the HDTMA modified Z/ZVI columns was primarily caused by the increase in chromate reduction rate constant. In contrast, at a slower flow rate, the retardation in chromate transport from the HDTMA modified Z/ZVI columns mainly originated from chromate sorption onto the HDTMA modified Z/ZVI pellets. Due to dual porosity, the presence of immobile water was responsible for the earlier breakthrough of chromate in columns packed with zeolite and Z/ZVI pellets. The results from this study further confirm the role of HDTMA in enhancing sorption and reduction efficiency of contaminants in groundwater remediation.     

Differential sorption behaviour of aromatic hydrocarbons on charcoals prepared at different temperatures from grass and wood

Naturally occurring charcoals are increasingly being recognized as effective sorbents for organic compounds. In this study we investigated the sorption of benzene and toluene in single-sorbate and bi-sorbate systems on different types of charcoals produced in laboratory, employing the batch sorption technique. Air dried plant materials from Phalaris grass (Phalaris tuberosa) and Red Gum wood (Eucalyptus camadulensis) were combusted under limited oxygen supply at 250 degrees C, 450 degrees C, and 850 degrees C. The resulting charcoals were characterized for their specific surface areas, total cation content, and pore size distributions (pore size distribution only for wood combusted at 450 degrees C and 850 degrees C). For the materials treated at 850 degrees C not only the surface area, microporosity, and total amount of sorbed sorbate increased markedly, but also the non-linearity of the sorption isotherm. The pore size distributions and surface areas as well as an indifferent sorption behaviour and competition effects for both sorbates indicated that pore filling mechanisms were the dominating processes governing the sorption on these microporous, high temperature treated materials. For the materials treated at lower temperatures the affinity of toluene was higher compared to that of benzene. In the bi-sorbate system the overall uptake of benzene increased. These phenomena might be due to the stronger hydrophobicity of toluene, and to a varying potential for swelling of the matrix and pore deformation by the two sorbates. The significantly lower sorption capacity of the Phalaris-derived material compared to the Red Gum charcoal correlated with its smaller surface area and higher cation content.     

Lead sorption by a Mexican,clinoptilolite-rich tuff

Goal, Scope and Background The retention of lead by a Mexican, clinoptilolite-rich tuff from Oaxaca (Mexico) at different pH values was evaluated and the lead sorption mechanisms on the zeolitic material in this work were discussed. Methods Isotherms were determined using lead nitrate solutions (initial pH values between 2 and 5) at 303 K. After the equilibrium was reached, the content of lead in the liquid phases was determined by atomic absorption spectrometry. The elemental composition of the clinoptilolite-rich tuff before and after the lead sorption process was evaluated by electron microscopy. Results The maximum ion exchange capacity of the Mexican, clinoptilolite-rich tuff for lead was 1.4 meq/g at pH 3, considering an ion exchange mechanism in the absence of any precipitated or hydrolyzed lead species in the sorption process or any change in the zeolite network. Langmuir and Freundlich isotherms were also considered in this work for comparison purposes. Discussion It is important to consider the nature of the sorption processes before choosing a model to describe the interaction between the metal ions and the sorbent. Conclusions The chemical lead speciation, the pH, as well as the characteristics of the clinoptilolite-rich tuff are important factors to be considered on the lead sorption process by natural zeolites. The chemical species involved in that process are Na⁺ from the zeolite and Pb²⁺ from the aqueous solution at pH 2 and 3, so that the ion exchange mechanism explains the lead sorption processes by the clinoptilolite-rich tuff through the ion exchange isotherms. The sodium, Mexican, clinoptilolite-rich tuff is a potential adsorbent for lead from aqueous solutions. Recommendations and Perspectives The natural zeolite-rich tuffs are very important as ion exchangers for the treatment of polluted water due to their sorption properties and low cost. The sorption behavior of each natural material depends on their composition. Mexican, clinoptilolite-rich tuff from Oaxaca (Mexico) could be used for the treatment of waste water contaminated with lead. It would be important to propose this material as an alternative as waste water treatment, because it shows good selectivity for the removal of heavy metals from water.     

Cell absorption induced desorption of hydrophobic organic contaminants from digested soil residue

Oral ingestion of contaminated soil is an important pathway of human exposure to hydrophobic organic contaminants (HOCs), particularly for children in developing countries. The mobilization potential of various contaminants from ingested soil is often characterized using an in vitro gastrointestinal model, based on the quantities of contaminants remaining in digestive fluid after digestion and separation. Recently, it was experimentally demonstrated that a large fraction of mobilized contaminants sorbed on the digested residue could be released if the dissolved fraction was removed by intestinal absorption. This hypothesis was further tested in this study. Soil spiked with dichlorodiphenyltrichloroethane and its metabolites (DDXs) and polycyclic aromatic hydrocarbons (PAHs) was digested using an in vitro gastrointestinal model. A human colon carcinoma cell line (Caco-2) was cultured in digestive fluid with or without soil residue (pre-equilibrated with the soil) for 2 h. A large proportion of the contaminants (37-68%) was sorbed on the digested residue. Without this residue, 66 ± 13% of DDXs and 73 ± 14% of PAHs dissolved in the fluid, as means and standard deviations, were absorbed by the cell monolayer after exposure. With both digestive fluid and residue, the sorbed fraction of PAHs and DDXs decreased by 38-92%, while the ratios of the cellular to the dissolved concentrations were 2.7-2.8 times higher than those without the residue. This supported the hypothesis that the cell absorption of dissolved HOCs induces desorption of the sorbed fraction from digestive residue, and the desorbed HOCs can be absorbed as well.     

Sorption of hydrophobic organic compounds onto organoclays

The behavior and fate of nonionic hydrophobic organic compounds (HOCs) in the environment are mainly controlled by their interactions with various components of soils and sediments. Due to their large surface area and abundance in many soils, smectites may greatly influence the fate and transport of the contaminants in the environment. In our experiments, HOC sorption by hexadecyltrimethylammonium (HDTMA)-modified smectite linearly increased with the amount of HDTMA added to the clay. However, tetramethylammonium (TMA)- and dodecyltrimethylammonium (DTMA)-modified smectites showed not only inferiority in their sorption of HOC compared with the HDTMA-smectite, but also a partially decreased HOC sorption at specific surfactant loading levels. This means that the sorption of organoclays for organic contaminants was significantly influenced by the amount and size of the surfactants added on the clay. In addition, it seems that the interlayer structure (e.g., pore size) formed at each surfactant loading level plays an important role to adsorb HOC in different amount.     

Sorption of organic pollutants by marine sediments: implication for the role of particulate organic matter

The objective of this study was to quantify sorption properties for kerogen/black carbon (BC)-bearing sediments. Single-solute sorption isotherms were measured for five pristine marine sediments using phenanthrene, naphthalene, 1,3,5-trichlorobenzene, and 1,4-dichlorobenzene as the sorbates. The results showed that the sorption isotherms were nonlinear and that the organic carbon normalized single point K_OC values were comparable to those reported in the literature for the purified keorgen and BC, but are much higher than the data reported for HA and kerogen/BC-containing terrestrial soils and sediments. It is likely that koergen and BC associated with these pristine marine sediments may not be encapsulated with humic acids or Fe and Mn oxides and hydroxides as often do in terrestrial soils and sediments. As a result, they may be fully accessible to sorbing molecules, exhibiting higher sorption capacities. The study suggests that competition from background HOCs and reduced accessibility when kerogen and BC are associated with terrestrial sediments may dramatically increase variability of sorption reactivities of geosorbents. Such variability may lead to large uncertainties in the prediction of sorption from the contents of kerogen and/or BC along with TOC.     

Competitive sorption of organic contaminants in chalk

In the Negev desert, Israel, a chemical industrial complex is located over fractured Eocene chalk formations where transfer of water and solutes between fracture voids and matrix pores affects migration of contaminants in the fractures due to diffusion into the chalk matrix. This study tests sorption and sorption competition between contaminants in the chalk matrix to make it possible to evaluate the potential for contaminant attenuation during transport in fractures. Single solute sorption isotherms on chalk matrix material for five common contaminants (m-xylene, ametryn, 1,2-dichloroethane, phenanthrene, and 2,4,6-tribromophenol) were found to be nonlinear, as confirmed in plots of Kd versus initial solution concentration. Over the studied concentration ranges, m-xylene Kd varied by more than a factor of 100, ametryn Kd by a factor of 4, 1,2-dichloroethane Kd by more than a factor of 3, phenanthrene Kd by about a factor of 2, and 2,4,6-tribromophenol Kd by a factor of 10. It was earlier found that sorption is to the organic matter component of the chalk matrix and not to the mineral phases (Chemosphere 44 (2001) 1121). Nonlinear sorption isotherms indicate that there is at least some finite sorption domain. Bi-solute competition experiments with 2,4,6-tribromophenol as the competitor were designed to explore the nature of the finite sorption domain. All of the isotherms in the bi-solute experiments are more linear than in the single solute experiments, as confirmed by smaller variations in Kd as a function of initial solution concentration. For both m-xylene and ametryn, there is a small nonlinear component or domain that was apparently not susceptible to competition by 2,4,6-tribromophenol. The nonlinear sorption domain(s) is best expressed at low solution concentrations. Inert-solvent-normalized single and bi-solute sorption isotherms demonstrate that ametryn undergoes specific force interactions with the chalk sorbent. The volume percent of phenanthrene sorbed at the liquid solubility limit is calculated to be 13% v:v in both the single and bi-solute experiments. This value exceeds what may be reasonably interpreted as partitioning of phenanthrene into organic matter, despite the relative linearity of the phenanthrene sorption isotherm (compared with other compounds) in both single and bi-solute systems.     

Characteristics of oxytetracycline sorption and potential bioavailability in soils with various physical-chemical properties

Veterinary antibiotics are widely used for disease treatment, prevention and animal growth promoting. Frequent detection of veterinary antibiotics in environments, caused by land application of untreated or even treated antibiotics-containing animal wastes, has posed the growing concern of their adverse effect on natural ecosystems. Oxytetracycline (OTC) is one of the most widely-used veterinary antibiotics in livestock industry. OTC present as a cation, zwitterions, or net negatively charged ion in soils complicates predicting its sorption characteristics and potential bioavailability and toxicity. This study was to identify soil properties influencing OTC sorption and its subsequent bioavailability in five soils with various physical-chemical properties. A solution used to determine bioavailable analytes in soils and sediments, 1 M MgCl₂ (pH 8.5), was chosen to desorb the potentially bioavailable fraction of OTC sorbed onto soils. Our results demonstrated that soils with higher illite content and permanent cation exchange capacity have higher OTC sorption capacity, but increase the availability of sorbed OTC indicated by higher release of sorbed OTC from soils into aqueous phase in 1 M MgCl₂ (pH 8.5). Reversely, soil organic matter (SOM), clay, kaolinite, variable cation exchange capacity, DCB-Fe and -Al have lower OTC sorption capacity, but decrease the release of sorbed OTC from soils into 1 M MgCl₂. These findings indicate that SOM and clay greatly influence OTC adsorption and potential availability. This study contributes significantly to our understanding of the potential bioavailability of sorbed OTC and the effects of soil properties on OTC sorption behaviors in soils.     

Grinding and sieving soil affects the availability of organic contaminants: a kinetic analysis

Field contaminated soils are often homogenized before application in bioassays and chemical assays that estimate the (bio)availability of their contaminants. The homogenization of the soil might affect the availability, and thereby the outcome of a bioassay might not reflect field situations. In this study, uptake kinetics of polycyclic aromatic hydrocarbons (PAH) by a negligible depletive passive sampler exposed to a ground and non-ground field contaminated soil were tested. The measurements illustrate how freely dissolved pore water concentrations of contaminants can be affected by soil treatment. It took more than a month, and over a year to reach steady state in the passive sampler exposed to the ground and non-ground soil, respectively. The uptake rate seemed to be limited by desorption from the soil, even though the fiber only extracted 0.2% of the soil-sorbed PAH at maximum. If these observations are translated to the field situation, where contaminants are not homogeneously distributed and disappear by (bio)degradation or physical transport processes, it is unlikely that pore water concentrations are solely determined by a thermodynamic equilibrium. Hence, exposure of organisms in these soils cannot always be estimated by sorption studies and an equilibrium partitioning approach.     

Impact of vegetated filter strips on sorbed herbicide concentrations and sorption equilibrium in agricultural plots

The objective was to investigate the impact of vegetated filter strips on exported atrazine and deethylatrazine concentrations [dissolved and sorbed to eroded sediments (>1.5?μm)], the deethylatrazine to atrazine ratio in water and sediments, the ratio of sorbed to dissolved herbicides in runoff and subsurface infiltration as well as field equilibrium state under natural climate during two seasons. We hypothesize that sorption equilibrium was not achieved in 2004 because of the short delay (<24?h) between herbicide application and the first rain event. In 2005, observations suggest that possible changing sorption equilibrium conditions were reached (20?days after atrazine application), especially for eroded sediments submitted to changing environmental conditions in subsurface. If confirmed by other experiments, this will raise the question of the representativeness of laboratory-determined soil sorption coefficients to predict the fate of pesticides.