城市生活垃圾填埋场项目环境风险与防范措施初探

通过对城市生活垃圾填埋场项目的环境风险进行研究和分析，提出了垃圾填埋场的环境风险与防范措施。     

Monitoring leachate composition at a municipal landfill site in New Delhi, India

Most of the landfills in developing countries do not have any liner at the base, or a drainage layer or a proper top cover, which results in the potential problem of groundwater/surface water contamination due to the leachate. Hence, to decide whether the leachate is to be collected and treated, or may be allowed to discharge into the adjoining soil or public sewer or surface waterbody, it is essential to have an estimate of the amount of leachate and, more importantly, the composition and strength of the leachate and variation of leachate contaminants with time as the landfill site develops. In this paper, the experimental work carried out at one of the landfills in New Delhi, India, to ascertain the composition of leachate, and its effect on the groundwater in the existing situation is presented. The variation in the leachate composition with the age of deposition of solid waste has been studied. The study indicates that the leachate composition varies considerably with the age of deposition of the waste. It may be worthwhile to use different methods for the treatment of leachate from different parts of the landfill, if collected separately. It has also been concluded that since leachate contains high concentrations of organic and inorganic constituents, including heavy metals, liners must be used at the landfills. The presence of bore wells at landfill sites to draw groundwater threatens to contaminate the groundwater, and immediate remediation steps should be taken at all landfill sites that have groundwater bore wells.     

Heavy metal contamination in the vicinity of an industrial area near Bucharest

Background, aim, and scope  

Heavy metals such as lead are well known to cause harmful health effects. Especially children are particularly susceptible to increased levels of lead in their blood. It is also a fact that lead concentration is increasing in the environment due to increased anthropogenic activity. The risk of heavy metal contamination is pronounced in the environment adjacent to large industrial complexes. In a combined case study, the environmental pollution by heavy metals was related to children’s health in the vicinity of an industrial area located 4 km south-east from Bucharest about 2 km east from the nearest town—Pantelimon. This site includes companies processing different, nonferrous solid wastes for recovery of heavy metals and producing different nonferrous alloys and lead batteries. In this paper, mainly the results of environmental sampling and analyses are summarized.     

Evaluation of groundwater contamination in a coastal area of south-eastern Sicily

This investigation was under taken to evaluate the groundwater resources contamination due to intensive agricultural practices (particularly greenhouses). The study-area is located in the coastal area of the Ragusa province (South-East Sicily), where numerous existing greenhouses may cause the contamination of groundwater systems (unconfined and confined aquifers) beneath the cropped land. The pollution risk is mainly related with the seepage process of macro-elements nitrogen (N), phosphorus (P), potassium (K), held in the irrigation water and the massive use of fertilizers and pesticides, that may pass through the unsaturated zone of the soil profile. Moreover, the area is characterized by the presence of several wells (about 15 wells/km2) for agricultural use that cause the aquifer overexploitation and the consequent risk of seawater intrusion. The agriculture practices adopted in the study area (irrigation volumes, fertilizer concentrations, use of pesticides…) were monitored since February 2009; moreover, the pollution risk of the aquifers was evaluated through the analysis of groundwater water samples collected (monthly) in the monitoring wells; in particular, nitrogen compounds, soluble phosphorous (PO?2?), potassium, as well as the main pesticides commonly used in the study area, were measured.The results show that electrical conductivity and chloride concentration values can cause reduction of production and leaf damage problems, respectively, for most of the monitored farm systems. The high nitrogen compounds concentrations observed in the monitored wells can cause health and environmental problems. Moreover high pesticide contamination of groundwater was found in two of the five monitored wells.     

A physical-chemical screening model for anticipating widespread contamination of community water supply wells by gasoline constituents

Continuing modifications of fuels like gasoline should include evaluations of the proposed constituents for their potential to damage environmental resources such as subsurface water supplies. Consequently, we developed a screening model to estimate well water concentrations and transport times for gasoline components migrating from underground fuel tank (UFT) releases to typical at-risk community water supply wells. Representative fuel release volumes and hydrogeologic characteristics were used to parameterize the transport calculation. Subsurface degradation processes were neglected in the model in order to make risk-conservative assessments. The model was tailored to individual compounds based on their abundances in gasoline, gasoline-water partition coefficients (Kgw), and organic matter-water partition coefficients (Kom). Transport calculations were conducted for 20 polar and 4 nonpolar compounds found in gasoline, including methyl tert-butyl ether (MTBE) and other ether oxygenates, ethanol, methanol, and some aromatic hydrocarbons. With no calibration, the screening model successfully captured the reported magnitude of MTBE contamination of at-risk community supply wells. Such screening indicates that other oxygenates would cause similar widespread problems unless they were biodegradable. Stochastic analysis of field parameter variability concluded that community supply well contamination estimates had order-of-magnitude reliability. This indicated that such pre-manufacturing analyses may reasonably anticipate widespread environmental problems and/or inspire focused investigations into chemical properties (e.g., biodegradability) before industrial adoption of new fuel formulations.     

Environmental epidemiology forward

Environmental epidemiology is the specialized aspect of public health science that studies human health risk from environmental hazards. It is rises largely upon a foundation of public health surveillance, and relies heavily upon analyses of data for small areas and sparse population groups. To a degree, environmental epidemiology is assigned the role of discerning very subtle human health impacts, or discerning early evidence of a tragic sequence. In that context, environmental epidemiology has a substantial public education and risk communication role. Environmental epidemiology will be greatly advanced as effective biological markers of exposure and precursor health effects are developed. At this point in time, statistical methods are in place to monitor population-level disease rates in high-risk populations for early risk identification and sentinel event recognition. Advances in geographic methods have provided a boon to the discipline by advantaging spatial studies. These advances in the discipline still need further refinement and pilot experiences. The inclusion of environmental epidemiological considerations with instances of proposed industrial expansion, hazardous waste management, and contamination remediation is heartily recommended.     

Enhancing the quality of recycled coarse aggregates by different treatment techniques—a review

Environmental Science and Pollution Research - Generation of solid wastes due to industrialization and urbanization results in dumping of wastes in landfills causing contamination of soil, air, and...     

Effect of solid waste landfill organic pollutants on groundwater in three areas of Sicily (Italy) characterized by different vulnerability

The aim of this study was to obtain information on the presence and levels of hazardous organic pollutants in groundwater located close to solid waste landfills. Eighty-two environmental contaminants, including 16 polycyclic aromatic hydrocarbons (PAHs), 20 volatile organic compounds (VOCs), 29 polychlorinated biphenyls (PCBs), 7 dioxins (polychlorinated dibenzo-p-dioxins, PCDDs) and 10 furans (polychlorinated dibenzofurans, PCDFs) were monitored in areas characterised by different geological environments surrounding three municipal solid waste landfills (Palermo, Siculiana and Ragusa) in Sicily (Italy) in three sampling campaigns. The total concentrations of the 16 PAHs were always below the legal threshold. Overall, the Fl/Fl + Py diagnostic ratio revealed that PAHs had a petrogenic origin. VOC levels, except for two notable exceptions near Palermo landfill, were always below the legal limit. As concerns PCB levels, several samples were found positive with levels exceeding the legal limits. It is worth noting that the % PCB distribution differs from that of commercial compositions. In parallel, some samples of groundwater containing PCDDs and PCDFs exceeding the legal threshold were also found. Among the 17 congeners monitored, the most abundant were the highest molecular weight ones.

     

Heavy metal pollution disturbs immune response in wild ant populations

Concern about the effects of environmental contaminants on immune function in both humans and wildlife is growing and practically nothing is known about this impact on terrestrial invertebrates, even though they are known to easily accumulate pollutants. We studied the effect of industrial heavy metal contamination on immune defense of a free-living wood ant (Formica aquilonia). To find out whether ants show an adapted immune function in a polluted environment, we compared encapsulation responses between local and translocated colonies. Local colonies showed higher heavy metal levels than the translocated ones but the encapsulation response was similar between the two groups, indicating that the immune system of local ants has not adapted to high contamination level. The encapsulation response was elevated in moderate whereas suppressed in high heavy metal levels suggesting higher risk for infections in heavily polluted areas.     

Electrodegradation of landfill leachate in a flow electrochemical reactor

Sanitary landfills are the major method used today for the disposal and management of municipal solid waste. Decomposition of waste and rainfall generate leachate at the bottom of landfills, causing groundwater contamination. In this study, leachate from a municipal landfill site was treated by electrochemical oxidation in a pilot scale flow reactor, using oxide-coated titanium anode. The experiments were conducted under a constant flow rate of 2000 lh(-1) and the effect of current density on chemical oxygen demand, total organic carbon, color and ammonium removal was investigated. At a current density of 116.0 mA cm(-2) and 180 min of processing, the removal rates achieved were 73% for COD, 57% for TOC, 86% for color and 49% for ammonium. The process proved effective in degrading leachate, despite this effluent's usual refractoriness to treatment.     

Sulfate contamination in groundwater from a carbonate-hosted mine

Sulfide oxidation in a carbonate environment produces groundwater contamination with high sulfate making the water unsuitable for drinking supplies. The zinc-lead mines near Shullsburg, Wisconsin are located in the Galena-Platteville Formation, a carbonate aquifer that was dewatered during mining. Sulfate levels have reached as high as 40 nmol/l in some local wells and eleven wells were abandoned.Geochemical modeling of chemical reactions and isotope effects using the USGS computer program PHREEQE showed the importance of dolomite, calcite, CO₂, and siderite or iron hydroxide in controlling the water chemistry. The decrease in sulfate levels with time indicated that dilution by incoming recharge water was an ongoing process. The results of carbon isotope reaction modeling are consistent with dilution of contaminated water. The evidence for localization of contamination and dilution means that area farmers have seen the worst of the contamination. The mechanism of contamination was further examined by microbiological sampling and sulfur isotope determinations, which indicated that bacteria of the Thiobacillus species that thrive under neutral pH conditions may have catalyzed sulfide oxidation.Research into the chemical evolution of contamination in this environment not only explains how sulfide oxidation causes contamination despite buffering by carbonate rocks, but also suggests how oxidation is initiated in the case of acid mine drainage.     

Fingerprinting and Groundwater Model Application to Evaluate Hydraulic Barrier Efficiency (Italy)

Remediation actions at contaminated sites are based on multiple numerical model scenarios considering different parameter distributions, source positions and contaminant transport paths. In some cases the excess of scenarios is due to uncertainties in the conceptual model as a result of the spread of contamination through heterogeneities in the physical system. Reduction of project hypotheses and conceptual model uncertainty is therefore needed. This result can be achieved by coupling hydrogeological investigations with environmental forensic techniques, better localization of the source and understanding of contamination history. In this respect, in the present study, compositional fingerprinting and groundwater flow modeling were applied to a former oil storage facility where, even though a hydraulic barrier had been built to stop the hydrocarbon plume, the presence of some hydrocarbons was still found in downgradient monitoring wells. The final aim was to evaluate the efficacy of the hydraulic barrier and identify of the source of pollution. Fingerprinting results indicated pollution with a gasoline-diesel mixture much altered by water washing and/or biodegradation. Comparison of seven groundwater samples collected in wells and monitoring wells was performed by analyzing the volatile fraction (BTEX) and the total ion chromatogram (TIC), focusing attention on: n-alkanes (m/z 85), alkylcyclohexanes (m/z 83), isoprenoids (m/z 113), C4-alkylbenzenes (m/z 134), C3-C6 alkylbenzenes and polycyclic aromatic hydrocarbons (PAHs). The most probable scenario was then identified by combining the results of fingerprinting with different contaminant paths obtained using the numerical model.     

Levels of dioxins, dibenzofurans and selected other chlorinated organic compounds in food from Russia

Food is considered to be the main source of dioxins (PCDDs) and dibenzofurans (PCDFs) for human intake, but there are relatively few publications reporting the levels of dioxins and furans in food samples.^(1–4) Food samples from western to eastern Russia were collected during three recent trips by one of us (AS), and tested for dioxins and dibenzofurans to provide some indication of environmental contamination. The results show that in specific food samples there are more dioxins present than dibenzofurans, but in fish samples the opposite is true. We compare the levels found in Russian food with levels found in samples from other countries, on both wet weight and lipid basis. These Russian samples show ranges similar to but slightly lower than those seen in other industrial countries.     

Evolution of Organic Analytical Methods in Environmental Forensic Chemistry

Over the past few decades the development of environmental regulations, advances in analytical chemistry and other scientific disciplines, and increased rigor in quality control procedures have created a new discipline, environmental forensics. The need for analytical methods that determine qualitatively and quantitatively organic compounds in the environment, especially in drinking waters, was recognized in the early 1950s. These methods were developed gradually by the early 1960s. The important tools of gas chromatography and mass spectroscopy that evolved in the 1970s provided the early environmental forensic chemist for the first time with the ability to produce scientifically sound data that was admissible in court. By the 1990s, multivariate statistical techniques became available and accepted, including principal component analysis (PCA) and polytopic vector analysis (PVA). These techniques, coupled with the advancing analytical methods, have enabled forensic investigator tools to evaluate and demonstrate unique attributes of a set of data. Analyses of marker compounds, PCBs, PCDD/Fs and petroleum hydrocarbons are all shown to be potentially valuable in deciphering the source and fate of contamination. This paper shows how advancements in environmental analytical chemistry provide the forensic chemist with tools to assess the source(s) of site contamination.     

A spatial temporal assessment of pollution from PCBs in China

This research represents an assessment of the current state of pollution from polychlorinated biphenyls (PCBs) in China. Various environmental media including sediment, water, organism and soil were analyzed and the spatial character of PCB pollution in each environmental medium was determined. On a national basis, PCB levels in all environmental media were relatively low, with little evidence of major contamination in China's main regions and rivers. However, there were some locations with high PCB concentrations. Sediments in Pearl River (83.1 ng/g) and its estuary (58.9 ng/g), Dalian Bay (58.1 ng/g) and Songhua River (36.8 ng/g) had relatively high level of PCBs. There were also some areas, which were mainly the industrial pollution sites or PCB equipment storage locations, remained seriously polluted with the highest PCB residue level of 150,000 ng/g. In addition, Minjiang Estuary (985.2 ng/g) and Taihu Lake (631 ng/g) had high levels of water pollution, while Pearl Estuary (635.7 ng/g) and Jiaozhou Bay (273.3 ng/g) had relatively high PCB levels in organisms. PCB pollution in soil was limited to a few special pollution areas with the highest PCB level of 4.5448 x 10(6) ng/g. Point source pollution was the common pattern of contamination, influenced primarily by local geographic, economic and historical factors. Analysis of PCB concentrations from the 1980s to 1990s shows an increasing trend, possibly due to the improper disposal of and leakage from PCB containers, chemical transfers, and the general rise of industrial pollution.     

Evolution of Organic Analytical Methods in Environmental Forensic Chemistry

Over the past few decades the development of environmental regulations, advances in analytical chemistry and other scientific disciplines, and increased rigor in quality control procedures have created a new discipline, environmental forensics. The need for analytical methods that determine qualitatively and quantitatively organic compounds in the environment, especially in drinking waters, was recognized in the early 1950s. These methods were developed gradually by the early 1960s. The important tools of gas chromatography and mass spectroscopy that evolved in the 1970s provided the early environmental forensic chemist for the first time with the ability to produce scientifically sound data that was admissible in court. By the 1990s, multivariate statistical techniques became available and accepted, including principal component analysis (PCA) and polytopic vector analysis (PVA). These techniques, coupled with the advancing analytical methods, have enabled forensic investigator tools to evaluate and demonstrate unique attributes of a set of data. Analyses of marker compounds, PCBs, PCDD/Fs and petroleum hydrocarbons are all shown to be potentially valuable in deciphering the source and fate of contamination. This paper shows how advancements in environmental analytical chemistry provide the forensic chemist with tools to assess the source(s) of site contamination.     

Informal e-waste recycling: environmental risk assessment of heavy metal contamination in Mandoli industrial area,Delhi, India

Nowadays, e-waste is a major source of environmental problems and opportunities due to presence of hazardous elements and precious metals. This study was aimed to evaluate the pollution risk of heavy metal contamination by informal recycling of e-waste. Environmental risk assessment was determined using multivariate statistical analysis, index of geoaccumulation, enrichment factor, contamination factor, degree of contamination and pollution load index by analysing heavy metals in surface soils, plants and groundwater samples collected from and around informal recycling workshops in Mandoli industrial area, Delhi, India. Concentrations of heavy metals like As (17.08 mg/kg), Cd (1.29 mg/kg), Cu (115.50 mg/kg), Pb (2,645.31 mg/kg), Se (12.67 mg/kg) and Zn (776.84 mg/kg) were higher in surface soils of e-waste recycling areas compared to those in reference site. Level exceeded the values suggested by the US Environmental Protection Agency (EPA). High accumulations of heavy metals were also observed in the native plant samples (Cynodon dactylon) of e-waste recycling areas. The groundwater samples collected form recycling area had high heavy metal concentrations as compared to permissible limit of Indian Standards and maximum allowable limit of WHO guidelines for drinking water. Multivariate analysis and risk assessment studies based on total metal content explains the clear-cut differences among sampling sites and a strong evidence of heavy metal pollution because of informal recycling of e-waste. This study put forward that prolonged informal recycling of e-waste may accumulate high concentration of heavy metals in surface soils, plants and groundwater, which will be a matter of concern for both environmental and occupational hazards. This warrants an immediate need of remedial measures to reduce the heavy metal contamination of e-waste recycling sites.     

Combined approaches to determine the impact of wood fire on PCDD/F and PCB contamination of the environment: a case study

Fires might be the source of persistent organic pollutants (POPs) such as dioxins, furans (PCDD/Fs) and/or polychlorobiphenyls (PCBs) in the environment. In the perspective of defining legal responsibilities a thorough characterization of the impact of such an event should be carried out. However, such characterization is not easy as the environment integrates both local and diffuse sources of such molecules. Thus, a combined approach, which includes gathering field surveys, modeling and laboratory experiments, should be conducted. The objective of this work is to illustrate different approaches to give sufficient insight to determine the actual impact of wood fire on the environment. The work was carried out at the vicinity of a burnt down parcel. The fired material was a mixture of wood and PCB-contaminated soils as the site was a former pyralene-disposal site. Modeling, soil and lichen sampling and experimental combustion were carried out to delineate the contamination for each chemical and to define the area within the fire that was responsible for the environmental contamination. Concentrations of PCDD/F and PCBs were very high on the burnt plot. The combined approach determined that the furans were the predominant compounds in the smoke emitted by the fire. Based on this tracer, it was possible to demonstrate that in terms of environmental contamination of PCDD/F, the impact of the fire was restricted to a 2 km radius from the burnt down plot. For PCBs, no specific tracer was identified. In this case, the delineation of the impact could only be empirical, based on the total concentration of the chemicals.     

Surveillance programme on dioxin levels in soils in the Campo de Gibraltar (southwest Spain)

The results of an epidemiologic study undertaken by the Spanish Council for Scientific Research (CSIC) after commission by the Spanish Parliament indicated that Huelva and Cádiz were the zones in Andalusia with elevated risk of cancer. A 6% (women) and 10% (men) cancer mortality excess was observed with respect to the other six Andalusian provinces. Huelva and Cádiz are located in the south-western region of Spain, and are characterized by a strong industrial activity concentrated in several industrial sites. This situation led to two environmental surveys in these areas, in which the presence of dioxins was studied among other parameters. A PCDD/F assessment in soils of the Campo de Gibraltar (Cádiz) was carried out from June 2003 to June 2004. A total of 20 samples were collected in this study divided in two sampling campaigns. The first 10 samples were taken in locations affected by high industrial activity zones as well as in landfills (hotspots). The rest of the samples were collected in areas that were not expected to be contaminated, such as agricultural zones and forests. I-TEQ values of the samples ranged from 0.26 to 15.08 ng/kg dm. In all, 85% of the samples were below the limit of 5 ng I-TEQ/kg I-TEQ concentrations of three samples only surpassed this limit. These zones corresponded to a landfill, a quarry used for dumping chemical product containers and a sample from the sewage system of the industrial site. These sites were used neither for agricultural nor for public purposes.