PCDD/Fs, dioxin-like PCBs and marker PCBs in eggs of peregrine falcons from Germany

Thirty one egg samples of peregrine falcons were collected in different regions of Germany (South-West, North and East) and analysed for PCDD/Fs, PCBs and marker PCBs. Altogether, 37 PCB congeners were determined, allowing a more detailed discussion of different aspects of the relative importance of these individual congeners. For comparison with dioxin data from other studies, differences between toxic equivalency factors (TEF) have to be taken into consideration. The results of this study are discussed on the basis of WHO-TEFs for birds published in 1998. All samples showed high levels of PCDD/Fs (median of all samples: 368 pg WHO-PCDD/F-TEQ/g fat; range 137-1453) and even higher levels of PCBs (median 967 pg WHO-PCB-TEQ/g fat; range 243-7482). The upper range of these levels reach concentrations found at the beginning of the Belgian dioxin crisis when a significant reduction in hens' egg hatchability was observed. The relative contribution of PCBs to the total TEQ is on average 71% (range 55-92%) with a tendency to higher values in South-West Germany compared to different sites in East Germany or one site in northern Germany. Within a region, a wide range of contamination can be found. Even in the same cities (Stuttgart and Ludwigshafen), results derived from eggs collected in the same year (2003) varied by factors 5-10. These findings show the high degree of variation occurring even within the same kind of biological matrix. Therefore, to allow for comparison of regions or time trends, a considerable number of samples has to be analysed.     

Nationwide monitoring of atmospheric PCDD/Fs and dioxin-like PCBs in South Korea

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) were measured in ambient air samples collected from different parts of South Korea in 2008, and the measured levels were used for assessing the spatial and temporal distribution of atmospheric PCDDFs and DL-PCBs in South Korea. The average concentrations of atmospheric PCDD/Fs and DL-PCBs among the 37 sites were 28 fg I-TEQ m⁻³ (ND ∼ 617) and 1 fg WHO-TEQ m⁻³ (ND ∼ 0.016). Elevated atmospheric levels of PCDD/Fs and DL-PCBs observed at residential/industrial sites and in the north-west of Korea, indicated a potential contribution and impacts of anthropogenic sources of PCDD/Fs and DL-PCBs. These levels were similar or lower than those previously reported in other ambient air surveys. Average concentrations of PCDD/Fs showed small seasonal variations (ANOVA analysis, p = 0.144). The highest concentrations of PCDD/Fs were observed during winter, followed by spring, autumn and summer. Atmospheric PCDD/Fs and DL-PCBs in South Korea rapidly decreased during the last 10 years (1998-2008), demonstrating the efficiency of stricter regulations and the application of best available technologies/best environmental practices at emission sources. Comparison of the congener profiles and principal component analysis showed that current atmospheric PCDD/Fs are mostly influenced by industrial sources and PCBs from old commercial PCB uses. Nationwide POPs monitoring will continue and allows an effective evaluation of the implementation of the Stockholm Convention on POPs.     

Historical trends of PCDD/Fs and dioxin-like PCBs in sediments buried in a reservoir in Northern Taiwan

Polychlorinated dibenzo-p-dioxin (PCDD), polychlorinated dibenzofuran (PCDF) and polychlorinated biphenyl (PCB) concentrations were analyzed at 1-2cm intervals in a sediment core collected from a reservoir in Northern Taiwan to evaluate the organic pollution history. The highest PCDD/F (14.4ng TEQ/kg d.w.) and PCB (0.261ng TEQ(WHO)/kg d.w.) concentrations were determined at 13-15cm (estimated year: 1992). The ages of the levels of sediment core were estimated from the sedimentation rate. Analysis results demonstrate that the PCDD/F concentration of the sediment core measured in the reservoir reached their peak when the municipal waste incinerators (MWIs) in the area started to operate. Furthermore, the decrease in sediment core PCDD/F concentration is related to the time of enforcement of the PCDD/F emission limit set by the Environmental Protection Administration (EPA) in Taiwan. Significant distribution of OCDD in homologue profiles was noted in archived soil samples in Taiwan in which the major input of PCDD/Fs was thought to be atmospheric. Major PCB congeners found in the sediment core were the major components of the commercial PCB products. Input fluxes of PCDD/Fs (5.75-158ng-I-TEQ/m(2)-yr) and PCBs (0.248-3.71ng TEQ(WHO)/m(2)yr) into the reservoir of interest are also calculated from the concentration and sedimentation rate of the sediment. The results reveal that considerable amounts of PCDD/Fs and PCBs were carried into the reservoir of interest in the flood stage but not during normal stage.     

PAHs, PCDD/Fs, PCBs and HCB in leaves from Brisbane, Australia

The concentrations of SOCs in leaves of an evergreen Australian native tree (Melaleuca leucadendra) and grass collected in Brisbane, Australia were determined. The concentrations of PCDD/Fs and PAHs in the leaf tissue were comparable to those reported for urbanised areas in other industrialised countries. A distinct difference in the compound profiles between the leaves of the two species was observed, with higher concentrations of the lower molecular mass PAHs and PCDD/Fs and lower concentrations of the higher molecular mass PAHs and PCDD/Fs in the Melaleuca leaves relative to the grass leaves. The interspecies differences are explained on the basis of the larger size of the lipophilic compartment (for compounds with low K(OA)) and the lower ratio of surface area to volume in the Melaleuca leaves.     

Survey of PCDD/Fs and non-ortho PCBs in UK sewage sludges

A survey of PCDD/F and non-ortho PCB concentrations in the mesophilic, anaerobically digested sludge of 14 UK wastewater treatment works was carried out. The range of total Cl1-Cl8DD/F concentrations in the sludges was 8880-428000 pg/g dw with a median of 23300 pg/g dw. The concentrations of the three non-ortho PCBs were in the range 272-63000 pg/g dw with a median of 695 pg/g dw. The PCDD/F I-TEQs of the sludges studied were comparable to those published in the literature with a range of 20-225 pg I-TEQ/g dw and a median of 40.4 pg/g dw. The non-ortho PCBs usually added 2-7 pg/g to the total TEQ with one notable exception which increased the TEQ value 20-fold. With three exceptions, the PCDD/F content of the sludges fell well below the draft EU limit values proposed on 27 April 2000. The homologue group pattern of the PCDD/Fs is dominated by the HpCDDs and OCDD and is consistent with that found in most sewage sludges. There appears to be no correlation between the degree of industrial input and the PCDD/F concentration. This suggests that trade effluent is not always the most significant source of PCDD/Fs to wastewater in the UK.     

Phytoremediation to increase the degradation of PCBs and PCDD/Fs

Phytoremediation is already regarded as an efficient technique to remove or degrade various pollutants in soils, water and sediments. However, hydrophobic organic molecules such as PAHs, PCBs and PCDD/Fs are much less responsive to bioremediation strategies than, for example, BTEX or LAS. PCDD/Fs and PCBs represent 3 prominent groups of persistent organic pollutants that share common chemical, toxicological and environmental properties. Their widespread presence in the environment may be explained by their chemical and biological stability. This review considers their fate and dissipation mechanisms. It is then possible to identify major sinks and to understand biological activities useful for remediation. Public health and economic priorities lead to the conclusion that alternative techniques to physical treatments are required. This review focuses on particular problems encountered in biodegradation and bioavailability of PCDD/Fs and PCBs. It highlights the potential and limitations of plants and micro-organisms as bioremediation agents and summarises how plants can be used to augment bacterial activity. Phytoremediation is shown to provide some new possibilities in reducing risks associated with dioxins and PCBs.     

Structure-related distribution of PCDD/Fs, PCBs and HCB in a river-sea system

Water concentrations of PCDD/Fs, HCB, and non-ortho, mono-ortho, and non-dioxin-like PCBs were measured four times during 1 year in a coastal area of the Baltic Sea, to investigate background levels and distribution behaviour. Sampling sites included two rivers, an estuary, and the sea. Particulate and apparently dissolved concentrations were determined using active sampling (filters + PUFs), while freely dissolved concentrations were determined using passive sampling (POM-samplers). The distribution between particulate + colloidal and freely dissolved phases, in the form of TOC-normalized distribution ratios (K_TOC), was found to be near or at equilibrium. The observed K_TOC were not significantly different between sampling sites or seasons. For PCDD/Fs, the concentrations were significantly correlated to suspended particulate matter (SPM), while no correlation to organic carbon (TOC) was observed. In the estuary and the sea, PCB concentrations were correlated to TOC. The sorption of various congeners to SPM and TOC appeared to be related to both hydrophobicity and 3D-structure. The PCDD/F concentration in the sea decreased to one third in May, likely connected to the increased vertical flux of particles during the spring bloom.     

PCDD/Fs and PCBs in Baltic herring during the 1990s

Baltic herring samples caught from the Baltic Sea during the spring periods of 1993-1994 and 1999 were analysed for polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF), and polychlorinated biphenyls (PCB). For analyses, 1570 individual herring were combined to 120 pools. Correlations between concentrations of congeners 1,2,3,7,8-PeCDD, 1,2,3,7,8-PeCDF, 2,3,4,7,8-PeCDF, and 2,3,4,6,7,8-HxCDF, and age of herring were the strongest (r>0.8) followed by correlations between PCB congeners PCB 105, 118, 126, 156, 169 and 180 (r>0.7), and age of herring. Due to higher fat percentage in herring in the Gulf of Bothnia the concentrations of PCDD/Fs and PCBs on fresh weight (fw) basis were higher than in herring in the Gulf of Finland. The concentrations of WHO(PCDD/F)-TEQs ranged from 1 to 27 pg/g fw, depending on the age and catchment area of herring, and concentrations of WHO(PCB)-TEQs reached 32 pg/g fw. Between the two studied time points no clear downward trend in concentrations was observed.     

Sources of PCDD/Fs, non-ortho PCBs and PAHs in sediments of high and low impacted transboundary rivers (Belgium-France)

PAHs, PCDD/Fs and non-ortho PCBs have been assessed in Yser and Upper-Scheldt river sediments. Higher contamination levels were observed in the Upper-Scheldt sediments: maximum concentrations for the 16 US-EPA PAHs, PCDD/Fs and non-ortho PCBs respectively amount to 8.9 mg kg⁻¹, 12 ng TEQ kg⁻¹ and 5.1 ng TEQ kg⁻¹. Diagnostic PAH ratios in sediments and atmospheric samples suggest that the PAH compounds are from pyrolytic origin, more specifically combustion processes. The huge consumption of coal in cokes-ovens and smelters and its use for house-heating in Northern France, although decreasing during the last decades, are in support of that suggestion. PCDD/F fingerprints in sediments and deposition material indicate that OCDD is the dominant congener. In addition use of pentachlorophenol (PCP) in the past led to a minor contribution of PCDD/Fs in our sediment samples. Non-ortho PCBs form a substantial fraction of the total TEQ concentrations observed in the sediments. Since the 1980s and 1990s a substantial reduction of the PCDD/F sediment concentrations is observed, but this is not the case for the PAHs.     

Levels and trends of PCDD/Fs and PCBs in human milk in Finland

Word Health Organization, WHO/EURO, has coordinated two rounds of follow-up studies on levels of PCDDs, PCDFs, and PCBs in human milk which were analyzed as two pooled samples from each participating country, one from urban and the other one from rural area. Finland has taken part to both of those studies and we are now reporting results of all the second round randomly sampled human milk samples (84 samples) from Southern (20) and Eastern (64) Finland. The levels of PCDD/Fs and PCBs in human milk in Southern Finland were considerably higher than in Eastern Finland. The level of PCDD/Fs in human milk in Southern Finland was the same as in the Central Europe but the level in Eastern Finland was similar to levels in Norway and eastern parts of Europe. The concentrations of PCDD/Fs and PCBs showed a significant decrease from 1987 to 1994. Declining of PCDD/Fs and PCBs was 36 and 49% in primiparae mothers' milk, respectively. This decrease in concentrations of PCDD/F and PCB was slightly greater in Eastern than in Southern Finland.     

Levels and congener profiles of PCDD/Fs, PCBs and PBDEs in seafood from China

A nationwide investigation into polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs), polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs) in market seafood was conducted for the first time in this study. Total PCDD/F concentrations in fatty fish ranged from 0.13 to 8.64 pg g⁻¹ wet weight (mean 2.05 pg g⁻¹ wet weight), total PCB concentrations ranged from 38.9 to 3514 pg g⁻¹ wet weight (mean 1133 pg g⁻¹ wet weight), and total PBDE concentrations ranged from 42.8 to 913 pg g⁻¹ wet weight (mean 322 pg g⁻¹ wet weight). Corresponding mean toxicity equivalent (TEQ) values for total PCDD/F and dioxin-like PCB were 0.25 pg g⁻¹ wet weight (WHO 98-TEQ) and 0.32 pg g⁻¹ wet weight (WHO 98-TEQ), respectively. OCDD, PCB-138 and PBDE-47 were the dominant compounds according to their respective congeners. WHO 98-TEQ _{PCDD/PCDF/PCB} for fatty fish and shell fish were 0.60 and 0.070 pg g⁻¹ wet weight, respectively, lower than the standard set by the European Commission. The contamination levels and profiles were compared with those documented in previous publications.     

Emissions of PCDD/Fs, PCBs, and PAHs from legacy on-road heavy-duty diesel engines

Exhaust emissions of seventeen 2,3,7,8-substituted polychlorinated dibenzo-p-dioxin/furan (PCDD/F) congeners, tetra-octa PCDD/F homologues, 12 WHO 2005 polychlorinated biphenyl (PCB) congeners, mono-nona chlorinated biphenyl homologues, and 19 polycyclic aromatic hydrocarbons (PAHs) from three legacy diesel engines were investigated. The three engines tested were a 1985 model year GM 6.2 J-series engine, a 1987 model year Detroit Diesel Corporation 6V92 engine, and a 1993 model year Cummins L10 engine. Results were compared to United States’ mobile source inventory for on-road diesel engines, as well as historic and modern diesel engine emission values. The test fuel contained chlorine at 9.8 ppm which is 1.5 orders of magnitude above what is found in current diesel fuel and 3900 ppm sulfur to simulate fuels that would have been available when these engines were produced. Results indicate PCDD/F emissions of 13.1, 7.1, and 13.6 pg International Toxic Equivalency (I-TEQ) L⁻¹ fuel consumed for the three engines respectively, where non-detects are equal to zero. This compares with a United States’ mobile source on-road diesel engine inventory value of 946 pg I-TEQ L⁻¹ fuel consumed and 1.28 pg I-TEQ L⁻¹ fuel consumed for modern engines equipped with a catalyzed diesel particle filter and urea selective catalytic reduction. PCB emissions are 2 orders of magnitude greater than modern diesel engines. PAH results are representative of engines from this era based on historical values and are 3-4 orders of magnitude greater than modern diesel engines.     

Occurrence of PCBs, PCDD/Fs, PBDEs and DDTs in Spanish breast milk: enantiomeric fraction of chiral PCBs

Concentrations and congener specific profile of DDTs, PCBs and PCDD/Fs have been determined in a number of Spanish breast milk samples. The concentrations found indicate a decreasing tendency compared to previous data from the 1990s. Mean concentrations of 238 ng/g fat weight, 111 ng/g fat weight and 82.1 pg/g fat weight were found for DDTs, PCBs and 2,3,7,8-PCDD/Fs, respectively. When the WHO-TEQs were calculated, PCDD/Fs was the family contributing with the highest percentage to the total (62-84%), followed by the non-ortho PCBs (10-25%) and the mono-ortho PCBs (5-24%). The congener specific accumulation patterns found were comparable to those reported in other studies in industrialised countries. In addition, the levels of 9 PBDEs congeners have been also determined in the breast milk samples. The concentrations ranged from 0.04 to 1.38 ng/g fat weight. The enantiomeric enrichment of a number of chiral PCBs in the breast milk samples, including congeners 84, 91, 95, 132, 135, 149, 171, 174, 176 and 183, has also been studied, for some of them for the first time in this matrix.     

Emissions of PCDD/Fs,PCBs, and PAHs from legacy on-road heavy-duty diesel engines

Exhaust emissions of seventeen 2,3,7,8-substituted polychlorinated dibenzo-p-dioxin/furan (PCDD/F) congeners, tetra–octa PCDD/F homologues, 12 WHO 2005 polychlorinated biphenyl (PCB) congeners, mono–nona chlorinated biphenyl homologues, and 19 polycyclic aromatic hydrocarbons (PAHs) from three legacy diesel engines were investigated. The three engines tested were a 1985 model year GM 6.2 J-series engine, a 1987 model year Detroit Diesel Corporation 6V92 engine, and a 1993 model year Cummins L10 engine. Results were compared to United States’ mobile source inventory for on-road diesel engines, as well as historic and modern diesel engine emission values. The test fuel contained chlorine at 9.8 ppm which is 1.5 orders of magnitude above what is found in current diesel fuel and 3900 ppm sulfur to simulate fuels that would have been available when these engines were produced. Results indicate PCDD/F emissions of 13.1, 7.1, and 13.6 pg International Toxic Equivalency (I-TEQ) L⁻¹ fuel consumed for the three engines respectively, where non-detects are equal to zero. This compares with a United States’ mobile source on-road diesel engine inventory value of 946 pg I-TEQ L⁻¹ fuel consumed and 1.28 pg I-TEQ L⁻¹ fuel consumed for modern engines equipped with a catalyzed diesel particle filter and urea selective catalytic reduction. PCB emissions are 2 orders of magnitude greater than modern diesel engines. PAH results are representative of engines from this era based on historical values and are 3–4 orders of magnitude greater than modern diesel engines.     

Occurrence of PCDD/Fs and dioxin-like PCBs in superficial sediment of Portuguese estuaries

Superficial sediments collected from seven estuarine systems located along the Portuguese coast were analyzed for 7 polychlorinated dibenzo-p-dioxins (PCDDs), 10 polychlorinated dibenzofurans (PCDFs), and 12 dioxin-like polychlorinated biphenyls (dl-PCBs). Total PCDD/F concentration ranged from 4.6 to 464 pg g^?1 dry weight (dw), while that of dl-PCBs varied from 26.6 to 8,693 pg g^?1 dw. In general, the highest PCDD/F and dl-PCB concentrations were associated with densely populated and industrially impacted areas. Additionally, PCDD/F revealed a predominance of octachlorodibenzodioxin (OCDD) to total PCDD/Fs, while PCB 118 was the major contributor to total dl-PCBs. This study provided a global perspective of the contamination status of Portuguese estuaries by dioxin-like compounds and allowed a comparison between the investigated systems and other systems worldwide. PCDD/F and dl-PCB levels found in the collected sediments were lower than those of highly impacted areas from different parts of the globe. Nevertheless, comparison with guidelines and quality standards from other countries indicated that some Portuguese estuarine areas with a high industrialization level present PCDD/F and dl-PCB concentrations in superficial sediment that may constitute a risk to aquatic organisms.     

Air concentrations of PCDD/Fs, PCBs and PCNs using active and passive air samplers

The concentrations of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polychlorinated naphthalenes (PCNs) were determined in air samples collected at four sampling sites located in two zones of Barcelona (Spain): near a municipal solid waste incinerator (MSWI) and a combined cycle power plant (3 sites), and at a background/control site. Samples were collected using high-volume active samplers. Moreover, 4 PUF passive samplers were deployed at the same sampling points during three months. For PCDD/Fs, total WHO-TEQ values were 27.3 and 10.9 fg WHO-TEQm(-3) at the urban/industrial and the background sites, respectively. The sum of 7 PCB congeners and the Sigma PCN levels were also higher at the industrial site than at the background site. In order to compare active and passive sampling, the accumulated amounts of PCDD/Fs, PCBs and PCNs in the four passive air samplers, as well as the total toxic equivalents in each sampling site were also determined. To assess the use of PUF passive samplers as a complementary tool for PCDD/F, PCB and PCN monitoring, sampling rates were calculated in accordance with the theory of passive air samplers. PUF disks allowed establishing differences among zones for the POP levels, showing that they can be a suitable method to determine POP concentrations in air in areas with various potential emission sources. Although both particle and gas phase were sorbed by the PUFs, data of gas phase congeners are more reproducible.     

Comparative distribution, sourcing, and chemical behavior of PCDD/Fs and PCBs in an estuary environment

PCDD/F and PCB field data (1041 samples) in five media (dissolved, suspended sediment, bed sediment, catfish, and blue crab) were studied to explore dual contaminant patterns in the Houston Ship Channel, Texas, USA. PCDD/Fs showed greater concentration than PCBs in suspended sediments while PCBs were higher in apparent dissolved (truly dissolved + DOC-associated), fish, and crab. PCDD/Fs at nearly all locations contributed more strongly to dioxin-like toxicity. The fraction of PCB TEQ was, however, enriched in biotic over abiotic media due in large part to the presence of PCB 126, which was mostly undetected in water and sediment and yet exhibited a BAF three times greater than 2,3,7,8-TCDD. Dissolved-suspended sediment and suspended-bed sediment relationships showed that (1) observed apparent dissolved concentration differences (as fraction of total water were mean 10% PCDD/Fs and 63% PCBs) can reasonably be explained by a four-phase partition model (truly dissolved, DOC-associated, suspended OC, and suspended BC) for PCBs but not for PCDD/Fs and (2) the contaminants behaved similarly in bed to suspended sediment concentration ratios (C_bed/C_susp) upstream of a major confluence but not downstream. PCA-cluster analysis pointed to the possibility that suspended sediment PCB contamination originates from resuspended bed sediment while PCDD/Fs in suspended sediment originates more probably from other sediment sources such as upstream wash load or air deposition. Finally, examinations of a congener marker ratio (PCB 209/206) seemed to indicate that a source of pure PCB 209 may exist in bed sediment near Patrick Bayou though the source was not completely localized.     

Characteristics of PAHs, PCDD/Fs and PCBs in sediment following forest fires in northern Alberta

Extensive forest fires occurred in northern Alberta, Canada, in 1998. Polynuclear aromatic hydrocarbons (PAHs), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and polychlorinated biphenyls (PCBs) were studied following these forest fires in order to explore natural and anthropogenic influences on the affected forest fire area. Specifically, concentrations and profiles of these compounds were determined in sediment samples. A predominance of alkylated PAH derivatives over parent PAHs were observed at the burned and reference sites. Naturally dervied PAHs were abundant at all sites. A high proportion and concentration of retene was observed at the totally burned site and indicates some inputs from forest fires. Very low concentrations of PCDD/Fs and PCBs were observed at all sites, and the profiles were very similar. This likely reflects common atmospheric contributing sources to the study area.     

Formation of PCDD/Fs and PCBs in the process of production of 1,4-dichlorobenzene

The occurrence and distribution of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) in a typical process of production of 1,4-dichlorobenzene (p-DCB) were investigated systematically in this study. P5CDFs and H6CDFs were the main congeners of PCDD/Fs, while only low levels of other PCDD/Fs were detected in the samples. The concentrations of PCBs were up to 4614 ng/g in the semi-manufactured products, and 1797 ng/g in the product p-DCB. It was also found that high chlorinated PCB congeners increased with the further chlorination. The levels of PCDD/Fs decreased obviously in the purification process, while PCBs could not be removed effectively. Polychlorophenols and other important dioxin precursors (1,4-dichloro-2-phenoxybenzene and 2-phenyl-2',5,5'-trichlorophenol) were also analyzed. Polychlorophenols which ortho- and para-positions of the hydroxyl were substituted by chlorine were the main congeners. In addition, a possible pathway of the formation of PCDD/Fs and PCBs in the production of p-DCB was presented. The results of this article suggest that re-estimation on the risk of using p-DCB products, especially the products for daily use such as mothballs, is expected.     

Estimation and characterization of PCDD/Fs and dioxin-like PCBs from Chinese iron foundries

The iron foundry industry is considered to be a potential source of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). This study investigated the emission factors and total emission amounts of PCDD/Fs and dioxin-like polychlorinated biphenyls (DL-PCBs) from iron foundries in China. The concentrations and the World Health Organization toxicity equivalents (WHO-TEQs) are presented and the congener profiles are discussed in this paper.In the present work, 26 fly ash samples were collected and tested to quantify the PCDD/Fs and DL-PCBs generated by 14 plants of different scales, and five stack gas samples were collected from two (named as EFG and LFG) of those plants. The emission levels of PCDD/Fs and DL-PCBs indicated that hot-air cupolas had lower emissions than cold-air cupolas. When iron ore lump and sinter were used as raw material, the emission factors were about 250 ng TEQ t⁻¹ of product. However, if the raw material was scrap, the emission factors varied owing to the different contents of organic materials in the raw materials. It was found that the mean WHO-TEQ values of PCDD/Fs and DL-PCBs were 144 and 34.2 pg Nm⁻³ in stack gas and 20.0 and 1.58 pg g⁻¹ in fly ash. In multiple tests, it was estimated that the mean emission factors of PCDD/Fs and DL-PCBs were 365 and 10.9 ng WHO-TEQ t⁻¹ released to residue and 2719 and 555 ng TEQ t⁻¹ released to air. The total emission amounts of PCDD/Fs and DL-PCBs from Chinese iron foundries with cupola furnaces released to residue and air were 16.8 and 146 g WHO-TEQ in 2008, respectively.