ANALYSIS OF RESIDENTIAL SOLID WASTE AT GENERATION SITES

An essential preliminary step in municipal solid waste (MSW) management is the accurate determination of the quantities and composition of the wastes. The purpose of this study was to test a procedure for the determination of these parameters at the source of generation (houses), rather than getting such data at transfer stations or disposal sites, as usually done in most previous studies. The average generation rate in kg per capita day⁻¹and percentages of various components of residential solid waste in Abu Dhabi City were determined by carrying out a statistically designed sampling survey. This survey covered 40 houses with different socio-economic levels and totalled 840 samples. The study showed an average generation rate of 1.76 kg per capita day⁻¹. Linear regression analysis revealed that this rate was dependent on the income level with an increase of about 35% for the high income residents over the average rate. The waste contained approximately 50% food waste. Frequency distribution analysis of waste composition data indicated that the food waste component is normally distributed, whereas the other components do not show a normal distribution pattern.     

Survey of composition and generation rate of household wastes in Beijing, China

It is recognized that information on both quantity and composition of residential waste is important for the effective planning of household waste handling infrastructure. In this paper, we present the results of a survey on household waste generation and composition in Beijing, China. Sample communities were selected by the integration of five indices including family population, income, age, and education. Wastes were sampled on a daily basis from 113 households in six different districts of Beijing City for ten days. The results showed that the generation rate of household wastes was 0.23 kg/pers/day. The bulk density was approximately 221 kg/m³, and the moisture content was approximately 50%. Household waste consisted of kitchen waste, paper/cardboard, plastics, textiles, metals, glass and other wastes, the proportion of each waste was approximately 69.3%, 10.3%, 9.8%, 1.3%, 0.8%, 0.6% and 2.7%, respectively. An evaluation of the relationship between daily per capita generation of household waste and socio-economic factors indicated that household size and income both showed a negative relationship with household waste generation (kg/pers/day). As for the effect of education, families with a secondary educational level produced fewer household wastes (kg/pers/day) than those with a primary or advanced educational level.     

A survey on municipal solid waste and residents’ awareness in Da Nang city, Vietnam

A survey on solid waste generation and residents’ awareness was conducted in Da Nang city, Vietnam in 2010. We took samples from residents, hotels, restaurants, and city markets. Data reveals that each resident generates on average 0.71 kg/capita/day (3 kg/household/day). Regarding the composition, organic waste (food, flowers, leaves, grass) accounts for about 70 % of residents’ waste followed by plastics. Likewise, about 14 % of residents’ waste can be recycled. Furthermore, we find that middle income households in the suburbs have the largest waste generation with 4.9 kg/household/day. We consider that this finding is explained by their dedication to agricultural activities, such as planting fruit trees and vegetables, and gardening. Finally, we find that only about 60 % of interviewees have knowledge of how to segregate waste, however more than 90 % of them are willing to cooperate with the introduction of a waste segregation program in the city.     

Survey of solid waste generation and composition in a rapidly growing urban area in Central Nigeria

The objective of this study was to carry out a field survey of the solid waste generation profile in parts of Makurdi, a rapidly growing urban city in north central Nigeria. The areas surveyed covered low, medium and high-density residential quarters, representing high/medium/low income groups in the area. Results of the survey show that the bulk ( approximately 82%) of the solid waste generated in the area originates from households, rather than from commercial, institutional or industrial premises. Of the waste from households, a substantial proportion consists of various putrescible materials (36-57%), with ash, dust and sand (combined) forming another significant proportion (21-41%). From the non-household sources, putrescible matter is also significant (23-45%), as is the combined ash/dust/sand fraction (32-36%). The quantity of plastics/cellophane materials from household and non-household sources was, however, comparable (6-10%). There was more paper from commercial and institutional premises (9-12%) than from household or small/medium scale industrial premises (2-4%). Glass (0.1-6.9%), metals (mostly cans and bottle corks, 0.7-3.4%) and textiles (0.3-6%) form only a minor proportion of the waste across generators. Waste generation rates were for households, 0.54kg/cap/day; for commercial, 0.018kg/m(2)/day; institutional, 0.015kg/m(2)/day while for small and medium scale industries, the rate was 0.47kg/m(2)/day. As there is no previous study of this kind in the Makurdi urban area, what is reported here may be taken as baseline for the entire area. The implications of the findings for solid waste management planning are discussed.     

Household solid waste characteristics and management in Chittagong, Bangladesh

Solid waste management (SWM) is a multidimensional challenge faced by urban authorities, especially in developing countries like Bangladesh. We investigated per capita waste generation by residents, its composition, and the households' attitudes towards waste management at Rahman Nagar Residential Area, Chittagong, Bangladesh. The study involved a structured questionnaire and encompassed 75 households from five different socioeconomic groups (SEGs): low (LSEG), lower middle (LMSEG), middle (MSEG), upper middle (UMSEG) and high (HSEG). Wastes, collected from all of the groups of households, were segregated and weighed. Waste generation was 1.3kg/household/day and 0.25kg/person/day. Household solid waste (HSW) was comprised of nine categories of wastes with vegetable/food waste being the largest component (62%). Vegetable/food waste generation increased from the HSEG (47%) to the LSEG (88%). By weight, 66% of the waste was compostable in nature. The generation of HSW was positively correlated with family size (r(xy)=0.236, p<0.05), education level (r(xy)=0.244, p<0.05) and monthly income (r(xy)=0.671, p<0.01) of the households. Municipal authorities are usually the responsible agencies for solid waste collection and disposal, but the magnitude of the problem is well beyond the ability of any municipal government to tackle. Hence dwellers were found to take the service from the local waste management initiative. Of the respondents, an impressive 44% were willing to pay US$0.3 to US$0.4 per month to waste collectors and it is recommended that service charge be based on the volume of waste generated by households. Almost a quarter (22.7%) of the respondents preferred 12-1pm as the time period for their waste to be collected. This study adequately shows that household solid waste can be converted from burden to resource through segregation at the source, since people are aware of their role in this direction provided a mechanism to assist them in this pursuit exists and the burden is distributed according to the amount of waste generated.     

Estimating the quantity of solid waste generation in Oyo, Nigeria.

The study established waste multipliers that could be used in conjunction with the population figure of a city to estimate the quantity of solid waste generation in the developing world. Oyo, a traditional city in Nigeria was the focus of the study. Two sets of data were collected. The first was the information on the socio-economic attributes of residents obtained from 648 households through questionnaires administered using a systematic random sampling technique. The second was the measurement of waste generated in 25% of the households for a week in each of the 12 months of the year. The study established that 23.3% of the residents surveyed have educational qualifications beyond secondary school, with 51.2% engaged in occupations requiring very little or no formal education and 50.9% were in the low-income group. The daily per capita solid waste generation was 0.129 kg. The highest (9.8%) and lowest (6.5%) of the annual quantities of waste were produced in October and February, respectively. Similarly, 20.2% of the weekly generation was produced on Saturday and the 10.2% produced on Thursday was the lowest. Animal dung, which accounted for 18.0%, constituted the highest component of the total solid waste generated. The study further established that the organic component of the waste generation was 75.4%. The results of the regression analysis R2 significant at 0.001 showed that income, household size, social status, occupation, education and season of the year explained 88.8% of waste generation in Oyo. It was established that 50.90 tonnes of solid waste was generated per day in the city in 2005, and the daily generation in the year 2008 is estimated to be 55.20 tonnes. The study concluded that with an average annual population growth of 13 000 people for the town, an additional 1.3 acres of land will need to be legally acquired annually, implying that 10.92-19.68 hectares ill be required as dump site(s) over the next 20-30 years.     

Consumption patterns and household hazardous solid waste generation in an urban settlement in México

Mexico is currently facing a crisis in the waste management field. Some efforts have just commenced in urban and in rural settlements, e.g., conversion of open dumps into landfills, a relatively small composting culture, and implementation of source separation and plastic recycling strategies. Nonetheless, the high heterogeneity of components in the waste, many of these with hazardous properties, present the municipal collection services with serious problems, due to the risks to the health of the workers and to the impacts to the environment as a result of the inadequate disposition of these wastes. A generation study in the domestic sector was undertaken with the aim of finding out the composition and the generation rate of household hazardous waste (HHW) produced at residences. Simultaneously to the generation study, a socioeconomic survey was applied to determine the influence of income level on the production of HHW. Results from the solid waste generation analysis indicated that approximately 1.6% of the waste stream consists of HHW. Correspondingly, it was estimated that in Morelia, a total amount of 442ton/day of domestic waste are produced, including 7.1ton of HHW per day. Furthermore, the overall amount of HHW is not directly related to income level, although particular byproducts do correlate. However, an important difference was observed, as the brands and the presentation sizes of goods and products used in each socioeconomic stratum varied.     

Assessment of factors affecting household solid waste generation and its composition in Gulberg Town,Lahore, Pakistan

This paper analyzes and compares the findings of the characterization study of collected solid waste from households of three different socioeconomic groups in Lahore, Pakistan, over the four seasons, i.e. Spring (March–April, 2008), Summer (May–June, 2008), Monsoon (August–September, 2008) and Winter (December 2008 and January 2009). The generation rate of waste was 0.96 kg/cap/day for high-income, 0.73 kg/cap/day for middle and 0.67 kg/cap/day for low-income group. The average of total household solid waste (HSW) generation is 0.79 kg/cap/day (including 0.75 kg/cap/day for spring, 0.77 kg/cap/day for summer, 0.86 kg/cap/day for monsoon and 0.76 kg/cap/day. The breakdown for the major physical components of the waste shows that organic waste accounts for the largest proportion (67.46 %). The relations between waste generation rates by physical category and subcategory, in addition to factors such as socioeconomic groups (population density levels, household income and household size), seasonal variation, and daily variation (difference of HSW generation among days of a week) were also analyzed. Statistical analysis shows that there was no significant difference in overall waste generation among days of a week. A significant difference between the seasons for food waste, cardboard, PET, HDPE, other hazardous waste, battery cells, and dust and stone (p < 0.001) was found. The generation rates were found to be higher when compared to other developing countries.     

Solid waste management practices and review of recovery and recycling operations in Turkey

This paper provides a general overview of solid waste data and management practices employed in Turkey during the last decade. Municipal solid waste statistics and management practices including waste recovery and recycling initiatives have been evaluated. Detailed data on solid waste management practices including collection, recovery and disposal, together with the results of cost analyses, have been presented. Based on these evaluations basic cost estimations on collection and sorting of recyclable solid waste in Turkey have been provided. The results indicate that the household solid waste generation in Turkey, per capita, is around 0.6 kg/year, whereas municipal solid waste generation is close to 1 kg/year. The major constituents of municipal solid waste are organic in nature and approximately 1/4 of municipal solid waste is recyclable. Separate collection programmes for recyclable household waste by more than 60 municipalities, continuing in excess of 3 years, demonstrate solid evidence for public acceptance and continuing support from the citizens. Opinion polls indicate that more than 80% of the population in the project regions is ready and willing to participate in separate collection programmes. The analysis of output data of the Material Recovery Facilities shows that, although paper, including cardboard, is the main constituent, the composition of recyclable waste varies strongly by the source or the type of collection point.     

Municipal solid waste characteristics and management in Allahabad, India

Increasing population levels, rapid economic growth and rise in community living standard accelerates the generation rate of municipal solid waste (MSW) in Indian cities. Improper management of MSW causes hazards to inhabitants. The objectives of the study are to determine the quantitative and qualitative characteristics of MSW along with basic information and to create GIS maps for Allahabad city. The samples have been randomly collected from various locations and analyzed to determine the characteristics of MSW. A questionnaire survey has been carried out to collect data from inhabitants including MSW quantity, collection frequency, satisfaction level, etc. The Geographic Information System (GIS) has been used to analyze existing maps and data, to digitize the existing sanitary ward boundaries and to enter the data about the wards and disposal sites. The total quantity of MSW has been reported as 500 ton/day, and the average generation rate of MSW has been estimated at 0.39 kg/capita/day. The generated ArcGis maps give efficient information concerning static and dynamic parameters of the municipal solid waste management (MSWM) problem such as the generation rate of MSW in different wards, collection point locations, MSW transport means and their routes, and the number of disposal sites and their attributes.     

Medical waste production at hospitals and associated factors

This study was conducted to evaluate the quantities of medical waste generated and the factors associated with the generation rate at medical establishments in Taiwan. Data on medical waste generation at 150 health care establishments were collected for analysis in 2003. General medical waste and infectious waste production at these establishments were examined statistically with the potential associated factors. These factors included the types of hospital and clinic, reimbursement payment by National Health Insurance, total number of beds, bed occupancy, number of infectious disease beds and outpatients per day. The average waste generation rates ranged from 2.41 to 3.26kg/bed/day for general medical wastes, and 0.19-0.88kg/bed/day for infectious wastes. The total average quantity of infectious wastes generated was the highest from medical centers, or 3.8 times higher than that from regional hospitals (267.8 vs. 70.3Tons/yr). The multivariate regression analysis was able to explain 92% of infectious wastes and 64% of general medical wastes, with the amount of insurance reimbursement and number of beds as significant prediction factors. This study suggests that large hospitals are the major source of medical waste in Taiwan. The fractions of medical waste treated as infectious at all levels of healthcare establishments are much greater than that recommended by the USCDC guidelines.     

Door-to-door measurement of household waste arisings in selected towns in Malaysia

To establish the per capita household waste arisings, door-to-door measurement of discharged waste was carried out. Survey was done in four 2-week phases over a period of 13 months. A questionnaire survey was also carried out to obtain data on household size and other household characteristics as well as the extent of reduce and recycle activities. The results showed that there is a big variance among households on waste arisings, and that household size is an important socio-economic factor in determining per capita waste generation.     

Perspectives for integrated municipal solid waste management in Thessaloniki, Greece

Local authorities need updated and reliable data on the quantity and the quality of the waste generated in their area, in order to establish an integrated solid waste management system capable of fulfilling regional and national waste management targets. This paper presents information about the quantity and the characteristics of the municipal solid waste generated in Thessaloniki, which is the second largest city in Greece. It is based on the results of three research programs investigating the evolution of municipal solid waste. The investigations were carried out over the last 20 years at the landfill of Thessaloniki by the same research group using statistically acceptable practices for sampling and hand sorting. The results show a great increase in the incoming quantities during the last years and a significant increase of the per capita generation. There is also a significant change in the composition, demonstrated mainly by a decrease in the organic fraction followed by an increase of packaging materials (paper and plastic).     

Quality control of waste to incineration--waste composition analysis in Lidk?ping, Sweden.

In order to decrease environmental impacts in waste management the choice of treatment method must be based on the characteristics of the waste. Present sampling procedures do not provide statistically representative samples of solid waste and this provides difficulties in characterization. The objective of this study was to develop a procedure for waste component analysis and sampling of waste after collection and at plant level. A further objective was to characterize the waste delivered to an incineration plant for physical and chemical properties and to determine the amounts of delivered waste that could be classified as biofuels and fossil fuels. The proportions of recyclables and hazardous waste were also examined. Samples were taken randomly from waste trucks and divided by square implementation. Statistical analysis of the results showed that the number of sub-samples could be decreased with only a moderate increase in the confidence interval. This means that future waste composition analyses could be made more efficient and thereby less expensive. The analysis of the waste delivered to the Lidk?ping incineration plant (Central Sweden) showed that 66.4% of the household waste was composed of biofuels and 21.3% of non-renewable combustibles, of which 40.3% were recyclables. In addition, 11.6% of the household waste was non-combustible and 0.6% hazardous waste. The heat value for the biofuels was 18.0-19.7 MJ kg(-1) dry mass (DM) and for the fossil fuels 28.2-33.9 MJ kg(-1) DM. The industrial waste consisted of 35.9% biofuels, 62.0% fossil fuels, 1.6% non-combustible and 0.5% hazardous waste. The heat value was 19.5 MJ kg(-1) DM for the biofuels and 31.4 MJ kg(-1) DM for the fossil fuels.     

Mathematical modeling to predict residential solid waste generation

One of the challenges faced by waste management authorities is determining the amount of waste generated by households in order to establish waste management systems, as well as trying to charge rates compatible with the principle applied worldwide, and design a fair payment system for households according to the amount of residential solid waste (RSW) they generate. The goal of this research work was to establish mathematical models that correlate the generation of RSW per capita to the following variables: education, income per household, and number of residents. This work was based on data from a study on generation, quantification and composition of residential waste in a Mexican city in three stages. In order to define prediction models, five variables were identified and included in the model. For each waste sampling stage a different mathematical model was developed, in order to find the model that showed the best linear relation to predict residential solid waste generation. Later on, models to explore the combination of included variables and select those which showed a higher R(2) were established. The tests applied were normality, multicolinearity and heteroskedasticity. Another model, formulated with four variables, was generated and the Durban-Watson test was applied to it. Finally, a general mathematical model is proposed to predict residential waste generation, which accounts for 51% of the total.     

Physicochemical and compositional analyses of household solid wastes: opportunities for bioenergy production and sustainable waste management in Ethiopia

Journal of Material Cycles and Waste Management - This study aimed to determine the quantity and quality of source separated organic household solid waste (SSOHSW) generation in Addis Ababa,...     

Characterization of urban solid waste in Chihuahua, Mexico

The characterization of urban solid waste generation is fundamental for adequate decision making in the management strategy of urban solid waste in a city. The objective of this study is to characterize the waste generated in the households of Chihuahua city, and to compare the results obtained in areas of the city with three different socioeconomic levels. In order to identify the different socioeconomic trends in waste generation and characterization, 560 samples of solid waste were collected during 1 week from 80 households in Chihuahua and were hand sorted and classified into 15 weighted fractions. The average waste generation in Chihuahua calculated in this study was 0.676 kg per capita per day in April 2006. The main fractions were: organic (48%), paper (16%) and plastic (12%). Results show an increased waste generation associated with the socioeconomic level. The characterization in amount and composition of urban waste is the first step needed for the successful implementation of an integral waste management system.     

Sustainable recycling of municipal solid waste in developing countries

This research focuses on recycling in developing countries as one form of sustainable municipal solid waste management (MSWM). Twenty-three case studies provided municipal solid waste (MSW) generation and recovery rates and composition for compilation and assessment. The average MSW generation rate was 0.77 kg/person/day, with recovery rates from 5-40%. The waste streams of 19 of these case studies consisted of 0-70% recyclables and 17-80% organics. Qualitative analysis of all 23 case studies identified barriers or incentives to recycling, which resulted in the development of factors influencing recycling of MSW in developing countries. The factors are government policy, government finances, waste characterization, waste collection and segregation, household education, household economics, MSWM (municipal solid waste management) administration, MSWM personnel education, MSWM plan, local recycled-material market, technological and human resources, and land availability. Necessary and beneficial relationships drawn among these factors revealed the collaborative nature of sustainable MSWM. The functionality of the factor relationships greatly influenced the success of sustainable MSWM. A correlation existed between stakeholder involvement and the three dimensions of sustainability: environment, society, and economy. The only factors driven by all three dimensions (waste collection and segregation, MSWM plan, and local recycled-material market) were those requiring the greatest collaboration with other factors.     

Municipal solid waste management in Malaysia: Practices and challenges

Rapid economic development and population growth, inadequate infrastructure and expertise, and land scarcity make the management of municipal solid waste become one of Malaysia’s most critical environmental issues. The study is aimed at evaluating the generation, characteristics, and management of solid waste in Malaysia based on published information. In general, the per capita generation rate is about 0.5–0.8 kg/person/day in which domestic waste is the primary source. Currently, solid waste is managed by the Ministry of Housing and Local Government, with the participation of the private sector. A new institutional and legislation framework has been structured with the objectives to establish a holistic, integrated, and cost-effective solid waste management system, with an emphasis on environmental protection and public health. Therefore, the hierarchy of solid waste management has given the highest priority to source reduction through 3R, intermediate treatment and final disposal.     

Household hazardous waste quantification,characterization and management in China’s cities: A case study of Suzhou

A four-stage systematic tracking survey of 240 households was conducted from the summer of 2011 to the spring of 2012 in a Chinese city of Suzhou to determine the characteristics of household hazardous waste (HHW) generated by the city. Factor analysis and a regression model were used to study the major driving forces of HHW generation. The results indicate that the rate of HHW generation was 6.16 (0.16–31.74, 95% CI) g/person/day, which accounted for 2.23% of the household solid waste stream. The major waste categories contributing to total HHW were home cleaning products (21.33%), medicines (17.67%) and personal care products (15.19%). Packaging and containers (one-way) and products (single-use) accounted for over 80% of total HHW generation, implying a considerable potential to mitigate HHW generation by changing the packaging design and materials used by manufacturing enterprises. Strong correlations were observed between HHW generation (g/person/day) and the driving forces group of “household structure” and “consumer preferences” (among which the educational level of the household financial manager has the greatest impact). Furthermore, the HHW generation stream in Suzhou suggested the influence of another set of variables, such as local customs and culture, consumption patterns, and urban residential life-style. This study emphasizes that HHW should be categorized at its source (residential households) as an important step toward controlling the HHW hazards of Chinese cities.