Optimisation of decolourisation and degradation of Reactive Black 5 dye under electro-Fenton process using Fe alginate gel beads

The aim of this work was to improve the ability of the electro-Fenton process using Fe alginate gel beads for the remediation of wastewater contaminated with synthetic dyes and using a model diazo dye such as Reactive Black 5 (RB5). Batch experiments were conducted to study the effects of main parameters, such as voltage, pH and iron concentration. Dye decolourisation, reduction of chemical oxygen demand (COD) and energy consumption were studied. Central composite face-centred experimental design matrix and response surface methodology were applied to design the experiments and to evaluate the interactive effects of the three studied parameters. A total of 20 experimental runs were set, and the kinetic data were analysed using first-order and second-order models. In all cases, the experimental data were fitted to the empirical second-order model with a suitable degree for the maximum decolourisation of RB5, COD reduction and energy consumption by electro-Fenton–Fe alginate gel beads treatment. Working with the obtained empirical model, the optimisation of the process was carried out. The second-order polynomial regression model suggests that the optimum conditions for attaining maximum decolourisation, COD reduction and energy consumption are voltage, 5.69 V; pH 2.24 and iron concentration, 2.68 mM. Moreover, the fixation of iron on alginate beads suggests that the degradation process can be developed under this electro-Fenton process in repeated batches and in a continuous mode.     

The use of respirometric measurements to determine the toxicity of textile dyes in aqueous solution and after oxidative decolourisation processes

Selected results from the degradation of reactive-dye hydrolysates after UV irradiation, ozonation and sodium peroxodisulphate (NaPS) treatment are presented. Reactive dyes with representative chromophores and anchor groups were chosen for the research project. Different stages of oxidative decolourisation were examined and determined by water parameters for biological degradation (BOD). The paper focuses on toxicity tests with Pseudomonas putida to consider whether the oxidative treatments result in products with a risk for the environment. Tests were performed with the AQUALYTIC^® Sensomat System, which measures biological oxygen demand (BOD). It was determined that the chosen oxidative treatments had as a rule no bearing on respiration of P. putida. Experiments with hydrolysates after short-term UV irradiation resulted in a slightly increased but not long-lasting toxicity in comparison with treatments with ozone or NaPS. Toxic effects were found in tests with hydrolysates of metalliferous dyes. During oxidative treatment, metals were liberated from the chromophores. This did cause complete inhibition of respiration of P. putida. Dye Blue E, a member of a dye class with chlorotriazine anchor groups, was itself found to be toxic, caused by the reactivity of the anchor group. The hydrolysate is only of minor toxicity.     

Selection of an appropriate model to predict plume dispersion in coastal areas

In order to suggest a new methodology for selecting an appropriate dispersion model, various statistical measures having respective characteristics and recommended value ranges were integrated to produce a new single index by using fuzzy inference where eight statistical measures for various model results, including fractional bias (FB), normalized mean square error (NMSE), geometric bias mean (MG), geometric bias variance (VG), within a factor of two (FAC2), index of agreement (IOA), unpaired accuracy of the peak concentration (UAPC), and mean relative error (MRE), were taken as premise part variables. The new methodology using a single index was applied to the prediction of ground-level SO₂ concentration of 1-h average in coastal areas, where eight modeling combinations were organized with fumigation models, σ_y schemes for pre-fumigation, and modification schemes for σ_y during fumigation. As a result, the fumigation model of Lyons and Cole was found to have better predictability than the modified Gaussian model assuming that whole plume is immerged into the Thermal Internal Boundary Layer (TIBL). Again, a better scheme of σ_y (fumigation) was discerned. This approach, which employed the new integrated index, appears to be applicable to model evaluation or selection in various areas including complex coastal areas.     

Wastewater treatment to enhance the economic viability of microalgae culture

Microalgae culture is still not economically viable and it presents some negative environmental impacts, concerning water, nutrient and energy requirements. In this context, this study aims to review the recent advances on microalgal cultures in wastewaters to enhance their economic viability. We focused on three different culture concepts: (1) suspended cell systems, (2) cell immobilization, and (3) microalgae consortia. Cultures with suspended cells are the most studied. The nutrient removal efficiencies are usually high for wastewaters of different sources. However, biomass harvesting is difficult and a costly process due to the small cell size and lower culture density. On the other hand, the cell immobilization systems showed to be the solution for this problem, having as main limitation the nutrient diffusion from bulk to cells, which results in a reduced nutrient removal efficiency. The consortium between microalgae and bacteria enhances the growth of both microorganisms. This culture concept showed to be a promising technology to improve wastewater treatment, regarding not only nutrient removal but also biomass harvesting by bioflocculation. The aggregation mechanism must be studied in depth to find the process parameters that would lead to an effective and cheap harvesting process.     

回用生活污水的电化学消毒试验研究

对北京某中水站回用于杂用水的生活污水进行电化学消毒试验。试验结果表明 ,生活污水经生物接触氧化、活性炭吸附后 ,流经电化学消毒器停留 2 0s、耗电 0 .30kWh/m3 、消毒器出水放置 1h后 ,总大肠菌群数 <3个 /L ,满足生活杂用水的卫生学指标。当余氯浓度及接触时间相等的条件下 ,电化学消毒法的杀菌效果好于加氯消毒。E .coli细胞经电化学消毒和加氯消毒处理后 ,扫描电镜观察的结果表明 :2种方法作用后的细胞在形态上的变化是不相同的 ,说明电化学消毒的消毒机制不仅仅取决于电解产氯的作用 ,还有其他的杀菌作用     

In situ modification of an aquifer material by a cationic surfactant to enhance retardation of organic contaminants

Sorption of hexadecyltrimethylammonium chloride (HDTMA), a cationic surfactant, on aquifer material from Columbus AFB, Mississippi, U.S.A., was examined. Transport studies using flow-through columns and a box model aquifer showed that an almost stationary zone of HDTMA-modified aquifer material could be produced in situ without a significant decrease in hydraulic conductivity.Perchloroethylene (PCE) and naphthalene sorption isotherms on the HDTMA-modified aquifer material were linear, and sorption coefficients were increased by over two orders of magnitude relative to the unmodified material. The retardation of PCE by insitu emplaced HDTMA zones within a column was examined. Agreement between batch- and column-derived sorption coefficients and breakthrough curve symmetry indicates that local equilibrium was attained. Significant retardation of a naphthalene plume by an in situ emplaced surfactant zone was demonstrated in the box model aquifer system.The experimental results indicate that it is feasible to create in situ a sorbent zone within an aquifer using cationic surfactants. In most situations, the sorbent zone concept needs to be coupled with contaminant degradation processes for sorbent emplacement to be a practical tool in the remediation of groundwater contamination sites. Sorbent zones may be of benefit in the engineering of suitable environments for microbial or abiotic degradation reactions and by providing time slow reactions to occur.     

Managing climate change impacts to enhance the resilience and sustainability of Fennoscandian forests

Projected warming in Sweden and other Fennoscandian countries will probably increase growth rates of forest trees near their northern limits, increase the probability of new pest outbreaks, and foster northerly migration of both native and exotic species. The greatest challenges for sustainable forestry are to restore and enhance the ecological and socioeconomic diversity of intensively managed forested landscapes. With appropriate management, climate warming may facilitate the regeneration of this diversity. Experimental transplant gardens along latitudinal or altitudinal gradients and high-resolution maps of expected future climate could provide a scientific basis for predicting the climate response of potential migrant species. Management of corridors and assisted migration could speed the movement of appropriate species.     

Use of electrochemical technology to increase the quality of the effluents of bio-oxidation processes. A case studied

In this work, it has been studied the use of conductive-diamond electrochemical oxidation (CDEO) as a refining technology to assure the quality of the effluents of door manufacturing processes (DMP). To do this, the raw effluents of these factories have been treated by a combination of physicochemical, biological and CDEO treatments. CDEO was found to be a feasible alternative to the refinement of a wooden DMP waste. It can successfully decrease the organic load of the effluents of the biological oxidation with low energy requirements. In addition, in case of incidents in the biological process, CDEO can treat successfully the effluents of the coagulation process. The effluents of the biological treatment have also been treated by CDEO in order to check the possible use of electrochemical technology to increase the biodegradability of the effluents and their possible recycle to the biological treatment. Unfortunately, electrochemical technology was found to be not adequate to increase the biodegradability of the effluents of a biological treatment. The hard oxidation conditions generated during CDEO do not lead to the accumulation of intermediates but to the almost direct formation of carbon dioxide. Lowering the current density or changing the electrodes can not enhance the biodegradability of the effluents of an electrochemical cell.     

Investigation of indole biodegradation by Cupriavidus sp. strain IDO with emphases on downstream biotransformation and indigo production

Environmental Science and Pollution Research - Indole, as a typical N-heterocyclic aromatic pollutant, poses risks to living things; however, indole-biotransformation mechanisms remain...     

High efficiencies in the electrochemical oxidation of an anthraquinonic dye with conductive-diamond anodes

Oxidation of anthraquinonic dye Acid Blue 62 by electrolysis with conductive-diamond electrodes is studied in this work. COD, TOC, and color have been selected to monitor the degradation of the molecule as a function of several operating inputs (current density, pH, temperature, and NaCl concentration). Results show that the electrochemical oxidation of this model of large molecules follows a first order kinetics in all the conditions assessed, and it does not depend on the pH and temperature. The occurrence of chloride ions in wastewaters increases the rate of color and COD removal as a consequence of the mediated oxidation promoted by the chlorinated oxidizing species. However, chloride occurrence does not have an influence on the mineralization rate. First-order kinetic-constants for color depletion (attack to chromophores groups), oxidation (COD removal), and mineralization (TOC removal) were found to depend on the current density and to increase significantly with its value. A single model was proposed to explain these changes in terms of the mediated oxidation processes. Rate of mineralization remained very close to that expected for a purely mass transfer-controlled process. This was explained assuming that mediated oxidation does not have a significant influence on the mineralization in spite it has some effect on intermediate oxidation stages. The efficiency of the oxidation was found to depend mainly on the concentration of COD being negligible the effect of the other inputs assessed except for the occurrence of chloride ions. Opposite, the efficiency of mineralization depends on concentration of TOC and current density and it did not depend on the chloride occurrence. This observation was found to have an important influence on the power required to remove a given percentage of the initial TOC or COD. To decrease COD efficiently, the occurrence of chloride in the solution is very important, while to remove TOC efficiently, it is more important to work at low current densities and chloride effect is negligible. Energy consumption could be decreased by folds using the proper conditions.     

The application of electrochemical technology to the remediation of oily wastewater

The successful application of electrochemical technology, employing a dimensionally stable anode (DSA((R))), for the remediation of wastewater from the oil extraction industry has been demonstrated. Samples from the oil-water separation box of an effluent treatment plant were submitted to voltammetry, chronoamperometry and electrolysis studies using a DSA anode of nominal composition Ti/Ru(0.34)Ti(0.66)O(2). Electrolysis of the oily wastewater lead to a time-dependent reduction in chemical oxygen demand (COD) in the sample that could be attributed to: (i) the direct oxidation of oil components at the electrode, by the metal oxide itself or by OH() radicals available at the electrode surface, (ii) the indirect oxidation of oil components by intermediate oxidising agents formed in parallel reactions (ex. ClO(-)), and (iii) the aggregation of suspended oil droplets by electroflotation. The largest reduction (57%) in COD was obtained following electrolysis of an oily sample for 70 h at 50 degrees C with a current density of 100 mA cm(-2). The stability of DSA electrodes for use in oily wastewater remediation has been assessed.     

Optimization and assessment of an electrochemical advanced oxidation system for synthetic stormwater treatment

Environmental Science and Pollution Research - Electrochemical advanced oxidation processes (eAOPs) such as the current advanced oxidation system (AOS) are a type of electrochemical wastewater...     

Review of cooling techniques used to enhance the efficiency of photovoltaic power systems

Environmental Science and Pollution Research - Photovoltaic (PV) panels are one of the most important solar energy sources used to convert the sun’s radiation falling on them into electrical...     

Aerobic treatment of swine manure to enhance anaerobic digestion and microalgal cultivation

Aerobic treatment of swine manure was coupled with anaerobic digestion and microalgal cultivation. A 14-day aerobic treatment reduced the total solid content of swine manure by >15%. Ammonia and carbon dioxide were stripped by the air supplied, and this off-gas was further used to aerate the culture of Chlorella vulgaris. The microalgal growth rates in Bristol medium and the wastewater with the off-gas increased from 0.08 to 0.22 g/L/d and from 0.15 to 0.24 g/L/d, respectively. Meanwhile, the aerobically treated swine manure showed a higher methane yield during anaerobic digestion. The experimental results were used to establish a demonstration unit consisting of a 100 L composter, a 200 L anaerobic digester, a 60 L tubular photobioreactor, and a 300 L micro-open raceway pond.     

Genetic engineering of cyanobacteria to enhance biohydrogen production from sunlight and water

To mitigate global warming caused by burning fossil fuels, a renewable energy source available in large quantity is urgently required. We are proposing large-scale photobiological H(2) production by mariculture-raised cyanobacteria where the microbes capture part of the huge amount of solar energy received on earth's surface and use water as the source of electrons to reduce protons. The H(2) production system is based on photosynthetic and nitrogenase activities of cyanobacteria, using uptake hydrogenase mutants that can accumulate H(2) for extended periods even in the presence of evolved O(2). This review summarizes our efforts to improve the rate of photobiological H(2) production through genetic engineering. The challenges yet to be overcome to further increase the conversion efficiency of solar energy to H(2) also are discussed.     

Treatment of landfill leachate by electrochemical oxidation and anaerobic process.

The removal performance of typical refractory organic compounds in landfill leachate was investigated during the electrochemical (EC) oxidation and anaerobic process combined treatment system in this paper. The results indicated that the treatment of landfill leachate by the combined system was highly effective. The toxicity of leachate was notably decreased after the electrochemical oxidation process and the biodegradability was improved. The concentration of the organic acid with low molecular weight in the leachate increased from 28% to 90% based on the biodegradability assays after the EC oxidation process. The anaerobic digestion could further remove the residual organic compounds. At a hydraulic retention time (HRT) of 16 hours and an organic loading rate (OLR) of 8 kg COD/m3 d, the concentration of COD, SS, ALK, VA, N-TKN, N-NH4+ and P-PO4(3)- [corrected] in UASB effluent were 532, 12, 6744, 400, 540, 455 and 11.6 mg/L, respectively, with approximately 90% removal efficiency of COD. The organic compounds in the landfill leachate revealed different degradation characteristics in the combined system. p-chloroaniline, bisphenol A, 6-methyl-2-phenyl-quinoline, dimethylnaphthaline and N'-(2-methyl-4-chlorophenyl)-N-cyclohexyformamidine, classified into the first group in this paper, were completely removed by the EC oxidation and did not reappear in the effluent of the UASB reactor. Phenylacetic acid, 3-methyl-indole and N-cyclohexyl-acetamide, called the second group, were completely removed, but reappeared in the UASB reactor. 4-methyl-phenol, 3,4-dihydroisoquinoline, 2(3H)-benzothiazolone, exo-2-hydroxycineole and benzothiazole, the third group, were degraded little in the EC oxidation process, but extensively removed by the anaerobic process. Benzoic acid, benzenepropanoic acid and 2-cyano-3,5-dimethyl-1-hydroxypyrrole, the fourth group, concentration obviously increased in the EC process, but was completely removed in the UASB reactor. The content of volatile fatty acids (VFAs) markedly increased from 0.68% in the leachate to 16.18% in the effluent from the electrochemical oxidation process (EC(effl)). In addition, the degradation rate of organic compounds from the landfill leachate was different in the EC oxidation and anaerobic process.     

The role of activated carbon on the removal of p-nitrophenol in an integrated three-phase electrochemical reactor

Three-phase electrochemical reactor is still far from concerned in wastewater treatment in order to improve electrochemical treatment efficiency especially when the concentrations of organic pollutants are relatively low. This paper presents a novel process integrated electrocatalysis and activated carbon (AC) adsorption in a fluidization mode for p-nitrophenol (PNP) abatement, with special attention on probing the role of AC. Sparged by external gas (e.g., O(2)), the electrochemical reactor is actually a three-phase (gas, liquid, solid) reactor. By this one-step integrated process, the treatment efficiency was significantly promoted where PNP of initial concentration 150 mg l(-1) could be completely removed in no more than 30 min and it kept good performance for five consecutive runs, showing potential application for environmental remediation. In the integrated process, AC is in a dynamic state of adsorption and in situ electrochemical regeneration by the attack of electrogenerated hydroxyl radical on organic pollutants. When oxygen is sparged into the process, hydrogen peroxide can be formed by cathodic reduction and then decomposed by catalytic reaction on AC, which further promotes organic pollutants degradation.     

Using polymer solutions to enhance recovery of mobile coal tar and creosote DNAPLs

Direct pumping and enhanced recovery of coal tar and creosote dense, non-aqueous phase liquids (DNAPLs) from the subsurface have had mixed results because these DNAPLs are viscous fluids that can potentially alter aquifer wettability. To improve the inefficiencies associated with waterflooding, the research presented here considered the use of a polymer solution that can be added to the injected flood solution to increase the viscosity and decrease the velocity of the flooding solution. Results from one-dimensional, vertically oriented laboratory column experiments that evaluate the recovery of coal-derived DNAPL with both water and polymer flooding solutions are presented. The final DNAPL saturation remaining in the column was assessed in water and oil-wet systems for three viscous DNAPLs. Adding polymer to increase the aqueous solution viscosity did not have a significant impact in water-wet systems. A final DNAPL saturation of approximately 19% was achieved for both water and polymer floods. In contrast, the addition of polymer significantly improved recovery in oil-wet systems. The final saturation was over 40% in oil-wet systems after waterflooding, but approximately 19% with a polymer flushing solution. Although the final saturation produced with polymer flooding was similar between the oil- and water-wet systems, differences in the relative permeability and distribution of DNAPL in the porous matrix caused the DNAPL recovery to be much slower in the oil-wet system.     

A combination of ion exchange and electrochemical reduction for nitrate removal from drinking water. Part II: electrochemical treatment of a spent regenerant solution.

The process of electrochemical treatment of a solution after strong basic anion exchanger regeneration was studied. The goal of the study was to reduce the nitrate content in the solution to allow its use in a closed loop. Diaphragmless, flow-through cells in a recirculation mode with and without a fluidizing bed of inert particles in the interelectrode space equipped with copper (Cu) cathodes and activated titanium anodes were used. The temperature was maintained at 20 degrees C. To assess the influence of recirculation of the regenerant solution on the quality of the treated water, the effect of the addition of copper ions to the solution, postelectrolysis cathode treatment, and enhanced mass transfer on the electrolysis results with respect to current efficiency and residual nitrate and nitrite concentration were investigated using an artificial solution. On the basis of the experimental results, a laboratory-scale unit for selective nitrate removal was designed and constructed that integrated ion exchange and electrochemical cell to one assembly. The process of recirculation of regenerant solution was tested using groundwater.     

超声强化Fe0去除阳离子红GTL的研究

采用US/Fe⁰系统去除阳离子红GTL,考察了pH值、Fe⁰用量、超声功率及活性炭、H₂O₂、盐分添加对阳离子红GTL去除率的影响,利用紫外-可见吸收光谱变化查明阳离子红GTL在不同条件下的去除差异性,利用SEM解析铁的形态与染料去除的相关性。结果表明： pH≥5.0时超声和Fe⁰具有协同效应,Fe⁰用量2 g/L,pH=7.0,超声功率135 W,阳离子红GTL去除率达到96.07%;一定量的活性炭、H₂O₂、盐分添加会加速染料去除,US加速Fe⁰反应速度,但不改变染料降解机理,添加活性炭能够彻底降解阳离子红GTL,添加H₂O₂提供的氧化环境抑制苯胺类化合物生成;铁的形态及与染料的接触是影响染料去除效果的重要原因。