A dynamic optimization model for solid waste recycling

Recycling is an important part of waste management (that includes different kinds of issues: environmental, technological, economic, legislative, social, etc.). Differently from many works in literature, this paper is focused on recycling management and on the dynamic optimization of materials collection. The developed dynamic decision model is characterized by state variables, corresponding to the quantity of waste in each bin per each day, and control variables determining the quantity of material that is collected in the area each day and the routes for collecting vehicles. The objective function minimizes the sum of costs minus benefits. The developed decision model is integrated in a GIS-based Decision Support System (DSS). A case study related to the Cogoleto municipality is presented to show the effectiveness of the proposed model. From optimal results, it has been found that the net benefits of the optimized collection are about 2.5 times greater than the estimated current policy.     

Sustainable recycling of municipal solid waste in developing countries

This research focuses on recycling in developing countries as one form of sustainable municipal solid waste management (MSWM). Twenty-three case studies provided municipal solid waste (MSW) generation and recovery rates and composition for compilation and assessment. The average MSW generation rate was 0.77 kg/person/day, with recovery rates from 5-40%. The waste streams of 19 of these case studies consisted of 0-70% recyclables and 17-80% organics. Qualitative analysis of all 23 case studies identified barriers or incentives to recycling, which resulted in the development of factors influencing recycling of MSW in developing countries. The factors are government policy, government finances, waste characterization, waste collection and segregation, household education, household economics, MSWM (municipal solid waste management) administration, MSWM personnel education, MSWM plan, local recycled-material market, technological and human resources, and land availability. Necessary and beneficial relationships drawn among these factors revealed the collaborative nature of sustainable MSWM. The functionality of the factor relationships greatly influenced the success of sustainable MSWM. A correlation existed between stakeholder involvement and the three dimensions of sustainability: environment, society, and economy. The only factors driven by all three dimensions (waste collection and segregation, MSWM plan, and local recycled-material market) were those requiring the greatest collaboration with other factors.     

建筑废弃物循环利用的GD-AHP模型研究

通过分析国内外建筑废弃物循环利用的现状,找出制约我国建筑废弃物循环利用的因素,并借鉴国外的成功经验,提出促进我国建筑废弃物循环利用的可行方案;运用群组层次分析法（GD-AHP）分析获取的专家问卷数据,得出了可行方案的重要性排序.     

Long-term leaching scenarios for cement-based waste forms

Cement-based waste forms (solidified wastes) are used for the long-term land disposal of industrial hazardous wastes. A cement-based waste form can be prepared by mixing a hydraulic cement and, if needed, a bulking agent with an aqueous waste to cause it to solidify.This article presents eight long-term leaching scenarios based on various properties of waste forms and contaminants as well as different hydraulic regimes and characteristics of groundwater. Each scenario takes the form of a simplified mathematical model used to predict leaching rates for periods of up to 100 years.The analysis demonstrates the importance of chemically fixing the contaminants in the matrix and illustrates the advantages of avoiding situations where ground-water flows through the waste. In situations where advective transport is negligible, leaching rates are limited by pore diffusion and tend to decrease with time.     

Triboelectrostatic separation for granular plastic waste recycling: A review

The world’s plastic consumption has increased incredibly in recent decades, generating more and more plastic waste, which makes it a great public concern. Recycling is the best treatment for plastic waste since it cannot only reduce the waste but also reduce the consumption of oil for producing new virgin plastic. Mechanical recycling is recommended for plastic waste to avoid the loss of its virgin value. As a mechanical separation technology, triboelectrostatic separation utilizes the difference between surface properties of different materials to get them oppositely charged, deflected in the electric field and separately collected. It has advantages such as high efficiency, low cost, no concern of water disposal or secondary pollution and a relatively wide processing range of particle size especially suitable for the granular plastic waste. The process of triboelectrostatic separation for plastic waste is reviewed in this paper. Different devices have been developed and proven to be effective for separation of plastic waste. The influence factors are also discussed. It can be concluded that the triboelectrostatic separation of plastic waste is a promising technology. However, more research is required before it can be widely applied in industry.     

One-pot wet ball-milling for waste wire-harness recycling

Journal of Material Cycles and Waste Management - In this study, we developed a one-pot wet ball-milling method for the recovery of highly pure copper wire, poly(vinyl chloride) (PVC) coating, and...     

Trends in waste plastics and recycling

Zero emission is an ambitious project aimed at the conversion of the conventional top-down or one-directional flow type production systems of modern society to those of a recycling type. The basic idea underlying this project is to understand in detail the material flow mechanism in a particular segment of society and to evaluate the transformability of the hitherto one-directional types of process into recycling types. The authors, members of the Zero-Emission Research Group of Japan, are investigating the material flow of plastics in Japan. The present work describes the features of this project, as well as the results obtained so far. Received: May 28, 1998 / Accepted: October 16, 1998     

Benchmarking in municipal solid waste recycling

The paper presents an analysis of the factors influencing the recycling potential of municipalities in Israel, including population size and density, geographic location, current waste levels, and current waste management system. We employ a standard regression analysis in order to develop an econometric model to predict where potential for economically efficient recycling is highest. By applying this model to readily available data, it is possible to predict with close to 90% accuracy whether or not recycling will be economically efficient in any given municipality. Government agencies working to promote advanced waste management solutions have at their disposal only limited resources and budget, and so must concentrate their efforts where they will be most effective. The paper thus provides policy-makers with a powerful tool to help direct their efforts to promote recycling at those municipalities where it is indeed optimal.     

废旧冰箱无害化再生处理的关键技术

分析了废旧冰箱的结构特点和材料组成,介绍了其整体回收处理工艺及特殊部件再生处理的关键性技术。     

Optimum source segregation bin for household solid waste and waste plastic recycling

Journal of Material Cycles and Waste Management - This research aims to conceptualize a source segregation bin for household waste and demonstrate the recyclability of waste plastic. Various...     

废镀锡电线电缆的再生新技术

研究了可一步实现废镀锡电线电缆资源化的新方法。废镀锡电线电缆在真空条件下热解液化的同时,利用离心分离的方法将熔化的锡分离出来。实验后得到铜线、含锡碳渣、热解油、热解气。热解油可作为化工原料或进一步加工成燃料,少量不可凝的热解气体经碱液吸收后收集,以便循环利用。     

Application of system dynamics modeling for evaluation of different recycling scenarios in Singapore

The influence of socioeconomic factors, such as population and rapid economic growth, and the change of consumption and living patterns make waste management in Singapore, a complex issue. Due to limited land and resources, the solid waste management scheme requires a comprehensive approach. Therefore, system dynamics (SD) modeling was applied to assess alternative strategies for solid waste management by interconnecting landfill capacity and recycling efficiency with reference to the projection on waste generation. Nine different scenarios were investigated to identify the best approach to maintain environmental sustainability without inhibiting the economic growth. Four subsystems (i.e., population, economy, waste recycling, and waste disposal) have been incorporated into the SD model to broaden the effectiveness of the waste management system. Research findings revealed that a high economic pattern and a high recycling rate are recommended to satisfy the requirements for economic growth and environmental sustainability while extending landfill capacity for waste disposal. Even though the balance of expenditure could be increased by the high recycling rate, it meets the need for long-term incineration and landfill planning.     

Networking possibilities for waste recycling in Miyagi prefecture, Japan

Successful case studies for waste recycling in Japan have not been evaluated. The evaluation of economic efficiency and environmental effects were lacking at the time the actual network was established. A waste/resource input/output (I/O) coincidence retrieval system called ZENESYS was developed to examine the usefulness of a waste-exchange network in a nonmanufacturing district. We analyzed data from the Miyagi prefecture, a region without heavy industry. The data were collected from 77 companies using a questionnaire and interviews. A total of 33 possible waste exchange links arose after analysis using ZENESYS. However, these were frail networks that relied heavily on the construction industry. Two waste recycling technologies were selected from the ZENESYS database: reclaiming fuel from waste plastic and making construction materials from bottom ash. Evaluation of the environmental effects and economics of these two technologies showed they were both suitable for the environment, but no profit was made from reclaiming fuel from waste plastics. We concluded that in an area with no heavy industry, it may be difficult to adopt recycling technologies that have high environmental and economic performance. Materials are difficult to circulate among manufacturing industries even if a waste-exchange network exists, and resources are consumed during transportation and recycling.     

北京蟹岛集团发展循环经济调查

通过对民营企业北京蟹岛集团的实地调查,对其以“低消耗、低排放、低污染、高效益”为经营方针,以“生态、环保、可持续”为经营理念,成功实现“资源－消费－再利用”的循环经济增长模式进行详细介绍。并通过蟹岛集团自身的发展证明：循环经济不仅可以改变传统“资源－效益—废弃物”的线性增长模式,还可以促进企业的发展,为企业带来可观的经济效益。     

大连实施垃圾分类回收积极推进垃圾资源再生利用产业化

大连在全国率先创建新型垃圾分类回收体系,实现废旧物资回收与垃圾分类回收在同一个垃圾分类回收站内完成,有利于各类废物资源集中收集、分类回收、资源化利用或处理,彻底改革了我国传统落后的废旧物资回收与垃圾收集处理方式,为废旧物资与垃圾资源再生与循环利用提供了保障条件,也为垃圾处理产业化奠定了坚实的基础。     

Technical specifications for mechanical recycling of agricultural plastic waste

Technical specifications appropriate for the recycling of agricultural plastic wastes (APWs), widely accepted by the recycling industry were developed. The specifications establish quality standards to be met by the agricultural plastics producers, users and the agricultural plastic waste management chain. They constitute the base for the best economical and environmental valorisation of the APW.The analysis of the APW streams conducted across Europe in the framework of the European project “LabelAgriWaste” revealed the inherent characteristics of the APW streams and the inherent constraints (technical or economical) of the APW. The APW stream properties related to its recycling potential and measured during pilot trials are presented and a subsequent universally accepted simplified and expanded list of APW recycling technical specifications is proposed and justified. The list includes two sets of specifications, applied to two different quality categories of recyclable APW: one for pellet production process (“Quality I”) and another one for plastic profile production process (“Quality II”). Parameters that are taken into consideration in the specifications include the APW physical characteristics, contamination, composition and degradation. The proposed specifications are focused on polyethylene based APW that represents the vast majority of the APW stream. However, the specifications can be adjusted to cover also APW of different materials (e.g. PP or PVC) that are found in very small quantities in protected cultivations in Europe. The adoption of the proposed specifications could transform this waste stream into a labelled commodity traded freely in the market and will constitute the base for the best economical and environmental valorisation of the APW.     

发展中国家废塑料再生利用现状

介绍了发展中国家回收利用废塑料的现状,指出废塑料回收利用行业对其保护环境、节能减排、发展经济、增加就业等诸多方面的有利影响.并与我国的现状进行了对比,阐述了与我国相关行业的关系.