Global warming potential of food waste through the life cycle assessment: An analytical review

Food loss and waste represent an increasing concern under social, economic and environmental perspective, either in developed or developing realities. It is estimated that more than 1.3 billion tons of food waste are generated along the whole food supply chain, from agricultural to final consumption stages, with associated environmental impacts estimated in approximately 3.3 Gigatons of CO₂ equivalent per year (6% of total anthropogenic greenhouse gases emissions). Indeed, food waste issue has been accounted among the 17 Sustainable Development Goals in terms of responsible production and consumption, with the aim of halving per capita global food waste and reduce food losses by 2030. The present paper, through a systematic, analytical and configurative review on food waste global warming potential, focuses on the role of Life Cycle Assessment and its related opportunities and challenges along upstream, core and downstream stages, considering at the same time the challenges embedded within alternative disposal technologies. Through the choice of 16 different research string and the selection of 33 papers out of more than 2000 articles between 2011 and 2021, the authors highlight the environmental impacts associated to food waste with regards to: (a) entire food baskets; (b) specific food commodities; (c) food service and households' experiences; (d) diverse disposal alternatives (e.g., anaerobic digestion, incineration, landfill), addressing future research and suitable opportunities to reach national and international sustainable goals.     

Energy-related carbon emissions mitigation potential for the construction sector in China

China is undertaking a huge number of building and infrastructure projects. As a large consumer of energy-intensive building material, the construction activities provoke large direct carbon emissions in upstream industrial sectors (i.e. embodied carbon emissions). This paper aims to explore how construction-related climate policies could contribute to future national carbon emission mitigation efforts by employing a demand-side input-output model and scenario analysis. First, a hypothetical extraction approach is used to estimate the overall carbon emissions induced by the construction sector in the base year. Then scenario analysis is conducted to quantify the sector's technical potential for carbon mitigation in 2030 and 2050. We find that implementing construction-related climate measures in China could mitigate 2.5 Gt construction-induced CO2 in 2030, and 6.4 Gt in 2050 — more than Europe's annual total carbon emissions in 2015. More efficient electricity use could make a substantial contribution in the short-term. However, material-related initiatives, especially those focused on metal recycling, could yield significant carbon mitigation from 2030 onwards. Our findings suggest China to optimize the relationship between urbanization and construction to comply with the country's climate commitments better. Mechanisms to reform supply-side incentives, such as mandatory carbon labelling for construction material throughout the supply chain, could offer immediate benefits.     

The potential of biogas production from municipal solid waste in a tropical climate

The objective of this study was to estimate the potential of organic municipal solid waste generated in an urban setting in a tropical climate to produce biogas. Five different categories of wastes were considered: fruit waste, food waste, yard waste, paper waste, and mixed waste. These fractions were assessed for their efficiency for biogas production in a laboratory-scale batch digester for a total period of 8 weeks at a temperature of 15–30 °C. During this period, fruit waste, food waste, yard waste, paper waste, and mixed waste were observed to produce 0.15, 0.17, 0.10, 0.08, and 0.15 m³ of biogas per kilogram of volatile solids, respectively. The biogas produced and caloric value of each feedstock was in the range of 1.25?×?10^?3 m³ (17 kWh)/cap/day (paper waste) to 15?×?10^?3 m³ (170 kWh)/cap/day (mixed waste). Paper waste produced the least (<1×10^?3(<17.8 kWh)/cap/day), and mixed waste produced the highest methane yield (10?×?10^?3 m³ (178 kWh)/cap/day). Thus, mixed waste was found to be more efficient than other feedstocks for biogas and methane production; this was mainly related to the better C/N ratio in mixed waste. Taking the total waste production in Jimma into account, the total mixed organic solid waste could produce 865?×?10³ m³ (5.4 m³/capita) of biogas or 537?×?10³ m³ (3.4 m³/capita) of methane per year. The total caloric value of methane production potential from mixed organic municipal solid waste was many times higher than the total energy requirement of the area.     

Global warming implications of facade parameters: A life cycle assessment of residential buildings in Bahrain

On a global scale, the Gulf Corporation Council Countries (GCCC), including Bahrain, are amongst the top countries in terms of carbon dioxide emissions per capita. Building authority in Bahrain has set a target of 40% reduction of electricity consumption and associated CO₂ emissions to be achieved by using facade parameters. This work evaluates how the life cycle CO₂ emissions of buildings are affected by facade parameters. The main focus is placed on direct and indirect CO₂ emissions from three contributors, namely, chemical reactions during production processes (Pco₂), embodied energy (Eco₂) and operational energy (OPco₂). By means of the life cycle assessment (LCA) methodology, it has been possible to show that the greatest environmental impact occurs during the operational phase (80–90%). However, embodied CO₂ emissions are an important factor that needs to be brought into the systems used for appraisal of projects, and hence into the design decisions made in developing projects. The assessment shows that masonry blocks are responsible for 70–90% of the total CO₂ emissions of facade construction, mainly due to their physical characteristics. The highest Pco₂ emissions factors are those of window elements, particularly aluminium frames. However, their contribution of CO₂ emissions depends largely on the number and size of windows. Each square metre of glazing is able to increase the total CO₂ emissions by almost 30% when compared with the same areas of opaque walls. The use of autoclaved aerated concrete (AAC) walls reduces the total life cycle CO₂ emissions by almost 5.2% when compared with ordinary walls, while the use of thermal insulation with concrete wall reduces CO₂ emissions by 1.2%. The outcome of this work offers to the building industry a reliable indicator of the environmental impact of residential facade parameters.     

Estimating the mitigation potential of the Chinese service sector using embodied carbon emissions accounting

It is universally recognized that direct carbon emissions based on energy consumption and industrial production lead to carbon leakage and inequality. This paper employs input–output analysis (IOA) and the hypothetical extraction method (HEM) to establish an embodied carbon analysis framework to resolve the above externalities. As a typical downstream consumption industry, the service sector has had very little work examining its embodied carbon transfer structure and related climate policies. In this paper, carbon flows of China's service sector between 1997 and 2015 are mapped and a scenario analysis is conducted that accounts for the service sector development plan and carbon emissions reduction targets. The results demonstrate that 13–19% of carbon flows in the Chinese economy are caused by the service sector's demand of other sectors. Controlling the industry scale and carbon intensity of its upstream industries effectively mitigates the dramatic growth of embodied carbon emissions in the service sector. The embodied carbon emissions accounting framework might provide new insights for the definition of emissions reduction responsibility on both a regional and sectoral scale. The further exploration of the service industry from this novel perspective will be helpful in realizing China's overall carbon emissions reduction goals.     

Efficiency evaluation of sewage treatment plants with different technologies in Delhi (India)

Physical, chemical and microbiological efficiencies of Sewage Treatment Plants (STPs) located in Delhi's watershed in context of different treatment technologies employed in these plants have been determined. There were in all seventeen STPs treating domestic wastewater which were studied over a period of 12 months. These STPs were based on Conventional Activated sludge process (ASP), Extended aeration (Ex. Aeration), physical, chemical and biological removal treatment (BIOFORE) and oxidation pond treatment process. Results suggests that except "Mehrauli" STP which was based on Extended aeration process and "Oxidation pond", effluents from all other STPs exceeded FC standard of 10(3) MPN/100 ml for unrestricted irrigation criteria set by National river conservation directorate (NRCD). Actual integrated efficiency (IE(a)) of each STP was evaluated and compared with the standard integrated efficiency (IE(s)) based upon physical, biological and microbiological removal efficiencies depending upon influent sewage characteristics. The best results were obtained for STPs employing extended aeration, BIOFORE and oxidation pond treatment process thus can be safely used for irrigation purposes.     

Distribution of heavy metals in plants and fish of the Yamuna river (India)

The distribution of cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), iron (Fe), manganese (Mn), nickel (Ni), lead (Pb) and zinc (Zn) in the plants and fish of Yamuna river from Delhi to Allahabad, a distance of about 840 km, at five sampling stations was determined in the year 1981. The results have shown wide variations in the heavy metal levels from one sampling station to the other. The concentrations of Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn in the plants (Eicchornia crassipes) were found to be 0.02–0.12, 2.7–21.3, 4.6–64.8, 9.8–114.0, 193.0–1835.0, 380.0–1443.0, 4.4–83.0, 4.8–30.2, and 22.1–356.5 g g^-1 respectively whereas in the fish (Heteropnuestes fossilis) were found to be ND-0.40, 2.3–13.7, 3.7–26.9, 8.33–58.1, 278.3–1108.0, 81.3–213.8, 2.8–32.7, 1.4–12.8 and 101.8–364.8 gg^-1 respectively on dry weight basis.     

Arsenic accumulation in native plants of West Bengal, India: prospects for phytoremediation but concerns with the use of medicinal plants

Arsenic (As) is a widespread environmental and food chain contaminant and class I, non-threshold carcinogen. Plants accumulate As due to ionic mimicry that is of importance as a measure of phytoremediation but of concern due to the use of plants in alternative medicine. The present study investigated As accumulation in native plants including some medicinal plants, from three districts [Chinsurah (Hoogly), Porbosthali (Bardhman), and Birnagar (Nadia)] of West Bengal, India, having a history of As pollution. A site-specific response was observed for Specific Arsenic Uptake (SAU; mg kg(-1) dw) in total number of 13 (8 aquatic and 5 terrestrial) collected plants. SAU was higher in aquatic plants (5-60 mg kg(-1) dw) than in terrestrial species (4-19 mg kg(-1) dw). The level of As was lower in medicinal plants (MPs) than in non-medicinal plants, however it was still beyond the WHO permissible limit (1 mg kg(-1) dw). The concentration of other elements (Cu, Zn, Se, and Pb) was found to be within prescribed limits in medicinal plants (MP). Among the aquatic plants, Marsilea showed the highest SAU (avg. 45 mg kg(-1) dw), however, transfer factor (TF) of As was the maximum in Centella asiatica (MP, avg. 1). Among the terrestrial plants, the maximum SAU and TF were demonstrated by Alternanthera ficoidea (avg. 15) and Phyllanthus amarus (MP, avg. 1.27), respectively. In conclusion, the direct use of MP or their by products for humans should not be practiced without proper regulation. In other way, one fern species (Marsilea) and some aquatic plants (Eichhornia crassipes and Cyperus difformis) might be suitable candidates for As phytoremediation of paddy fields.     

Vegetation ecology and carbon sequestration potential of shrubs in tropics of Chhattisgarh,India

Tropical forests are well known to have great species diversity and contribute substantial share in terrestrial carbon (C) stocks worldwide. Shrubs are long-neglected life form in the forest ecosystem, playing many roles in the forest and human life. Shrub has great impact on vegetation attributes which in turn modify the C storage and capture. In the present investigation, an attempt has been made to explore the dynamics of shrub species in four fire regimes, viz. high, medium, low, and no fire zones of Bhoramdeo Wildlife Sanctuary of Kawardha forest division (Chhattisgarh), India. The variations in structure, diversity, biomass, productivity, and C sequestration potential in all the sites were quantified. The density and basal area of shrub varied from 1250 to 3750 individuals ha^?1 and 2.79 to 4.92 m² ha^?1, respectively. The diversity indices showed that the value of Shannon index was highest in medium fire zone (3.77) followed by high, low, and no fire zones as 3.25, 3.12, and 2.32, respectively. The value of Simpson’s index or concentration of dominance (Cd) ranged from 0.08 to 0.20, species richness from 0.56 to 1.58, equitability from 1.41 to 1.44, and beta diversity from 1.50 to 4.20, respectively. The total biomass and C storage ranged from 6.82 to 15.71 and from 2.93 to 6.76 t ha^?1, respectively. The shrub density, importance value index (IVI), and abundance to frequency ratio (A/F) significantly correlated between high fire and medium fire zone. The basal area was found to be significantly positively correlated between high fire and medium fire, and low and no fire zones, respectively. Two-way cluster analysis reflected various patterns of clustering due to influence of the forest fire which showed that some species have distant clustering while some have smaller cluster. Principal component analysis (PCA) reflects variable scenario with respect to shrub layer. Ventilago calyculata and Zizyphus rotundifolia showed higher correlation between themselves in terms of basal area (BA). The total shrub production was 1.59–3.53 t ha^?1 year^?1 while the C sequestration potential of 0.71–1.57 t ha^?1 year^?1 under different fire regimes. Shrub community in the medium fire zone reflected higher productivity and higher C sequestration in comparison to other fire zone. Among the different plant parts, the biomass accumulation ratio was highest in the root of shrub community among various fire regimes. Screening of species for restoration and different land-use pattern on the basis of biomass accumulation and carbon sequestering potential would be an effective strategy for decision-making in sustainable forest management.     

A study on the phytoaccumulation of waste elements in wetland plants of a Ramsar site in India

Some wetland plant species are adapted to growing in the areas of higher metal concentrations. Use of such vegetation in remediation of soil and water contaminated with heavy metals is a promising cost-effective alternative to the more established treatment methods. Throughout the year, composite industrial effluents bringing various kinds of heavy metals contaminate our study site, the East Calcutta Wetlands, a Ramsar site at the eastern fringe of Kolkata city (formerly Calcutta), India. In the present study, possible measures for remediation of contaminated soil and water (with elements namely, Ca, Cr, Cu, Pb, Zn, Mn, and Fe) of the ecosystem had been investigated. Ten common regional wetland plant species were selected to study their efficiency and diversity in metal uptake and accumulation. Results showed that Bermuda grass (Cynodon dactylon) had the highest total Cr concentration (6,601 ± 33 mg kg^???1 dw). The extent of accumulation of various elements in ten common wetland plants of the study sites was: Pb (4.4?C57 mg kg^???1 dw), Cu (6.2?C39 mg kg^???1 dw), Zn (59?C364 mg kg^???1 dw), Mn (87?C376 mg kg^???1 dw), Fe (188?C8,625 mg kg^???1 dw), Ca (969?C3,756 mg kg^???1 dw), and Cr (27?C660 mg kg^???1 dw) indicating an uptake gradient of elements by plants as Ca>Fe>Mn>Cr>Zn>Cu>Pb. The present study indicates the importance of identification and efficiency of metal uptake and accumulation capabilities by plants in relation to their applications in remediation of a contaminated East Calcutta Wetland ecosystem.     

Speciation of heavy metals in biosolids of wastewater treatment plants at Mysore,Karnataka, India

Urban wastewater treatment leads to the generation of large quantities of biosolids. Accumulation of biosolids is a problem of environmental relevance due to the existence of heavy metals in the biosolids. Determination of total metal in biosolid provides information relating pollution levels. Determination of their mobilization capacity and behaviour in the environment is an important task. An experimental approach commonly used for studying the mobility, transport and bioavailability of metal in biosolids is the use of selective sequential extraction procedure. In the present study an attempt has been made to study the heavy metal properties in biosolid samples collected from urban wastewater treatment plants located at Mysore, Karnataka. Few heavy metals selected for the present study are cadmium, chromium, copper, iron, nickel and zinc. The concentration of these metals in biosolids and their partition in different fractions are studied. The speciation of metals based on the sequential extraction scheme was carried out. The concentration of heavy metals is lower than that established by European legislation. The residual fraction has the maximum percentage of heavy metals whereas, only a small fraction of heavy metals (Fe, Zn and Cd) are extracted in the most soluble fractions, exchangeable and carbonate fractions.     

Groundwater potential zoning of a peri-urban wetland of south Bengal Basin, India

Demand for groundwater for drinking, agricultural, and industrial purposes has increased due to rapid increase in population. Therefore, it is imperative to assess the groundwater potential of different areas, especially in a fragile wetland ecosystem to select appropriate sites for developing well fields to minimize adverse environmental impacts of groundwater development. This study considers East Calcutta Wetlands (ECW)??a freshwater peri-urban inland wetland ecosystem located at the lower part of the deltaic alluvial plain of South Bengal Basin and east of Kolkata city. This wetland is well known over the world for its resource recovery systems developed by local people through ages, using wastewater of the city. The subsurface geology is completely blanketed by the Quaternary sediments comprising a succession of silty clay, sand of various grades, and sand mixed with occasional gravels and thin intercalations of silty clay. Groundwater occurs mostly under confined condition except in those places where the top aquitard has been obliterated due to scouring action of past channels. The groundwater in the study area is being over-extracted at the rate of 65 × 10³ m³/day. Overlay analysis in Geographic Information System platform using multiple criteria such as water quality index, hydraulic conductivity, groundwater velocity, and depth to piezometric surface reveals that in and around ECW, there are five groundwater potential zones. About 74% of the aquifer of this area shows very poor to medium groundwater potential. Management options such as minimization of groundwater abstraction by introducing the treated surface water supply system and the implementation of rainwater harvesting and artificial recharge in high-rise buildings and industries are suggested for different potential zones.     

Metal biomonitoring in water resources of Eastern Ghats,Koraput (Orissa), India by aquatic plants

Biomonitoring of toxic metals in the water resources used by indigenous tribal communities in Koraput district, Orissa, India was carried out under the National Technology Mission Project. Most of the water bodies catering for the day-to-day needs of the local inhabitants were found to contain high concentrations of Fe and Mn in addition to Cr, Cd, Pb and Cu. The water bodies supported by a great number of phytodiversity and the plants growing therein accumulated significantly high amounts of these toxic metals, submerged plants being more efficient than floating ones. The species like Chara corallina and Spirogyra spp. showed significant potential to magnify Cd and Pb in their tissue several times more than the concentrations in surrounding water. The levels of metals in the plants occurring at places where the metal content is very high could be used for indicating the status of water.NBRI Research Publication No. (437) NS.     

Heavy metals in water, sediments and wetland plants in an aquatic ecosystem of tropical industrial region, India

Concentrations of heavy metals (Cu, Cr, Fe, Pb, Zn, Hg, Ni, and Cd) and macronutrients (Mn) were measured in industrial effluents, water, bottom sediments, and wetland plants from a reservoir, Govind Ballabh (G.B.) Pant Sagar, in Singrauli Industrial region, India. The discharge point of a thermal power plant, a coal mine, and chlor-alkali effluent into the G.B. Pant Sagar were selected as sampling sites with one reference site in order to compare the findings. The concentrations of heavy metals in filtered water, sieved sediment samples (0.4-63 microm), and wetland plants were determined with particle-induced X-ray emission. The collected plants were Aponogeton natans, L. Engl. & Krause, Cyperus rotundus, L., Hydrilla verticillata, (L.f.) Royle, Ipomoea aquatica, Forssk., Marsilea quadrifolia, L., Potamogeton pectinatus, L., Eichhornia crassipes, (Mart.) Solms Monogr., Lemna minor, L., Spirodela polyrhiza (L.) Schleid. Linnaea, Azolla pinnata, R.Br., Vallisneria spiralis, L., and Polygonum amphibium, L. In general, metal concentration showed a significant positive correlation between industrial effluent, lake water, and lake sediment (p < 0.01). Likewise, significant positive correlation was recorded with metals concentration in plants and lake ambient, which further indicated the potential of aforesaid set of wetland macrophytes for pollution monitoring.     

Distribution and potential sources of polycyclic aromatic hydrocarbons in soils around coal-fired power plants in South Africa

The distribution and potential sources of 15 polycyclic aromatic hydrocarbons (PAHs) in soils in the vicinity of three South African coal-fired power plants were determined by gas chromatography–mass spectrometry. PAH compound ratios such as phenanthrene/phenanthrene + anthracene (Phen/Phen + Anth) were used to provide reliable estimation of emission sources. The total PAH concentration in the soils around three power plants ranged from 9.73 to 61.24 μg g^?1, a range above the Agency for Toxic Substances and Disease Registry levels of 1.0 μg g^?1 for significantly contaminated site. Calculated values of Phen/Phen + Anth ratio were 0.48?±?0.08, 0.44?±?0.05, and 0.38?+?0.04 for Matla, Lethabo, and Rooiwal, respectively. Flouranthene/fluoranthene + pyrene (Flan/Flan + Pyr) were found to be 0.49?±?0.03 for Matla, 0.44?±?0.05 for Lethabo, and 0.53?±?0.08 for Rooiwal. Such values indicate a pyrolytic source of PAHs. Higher molecular weight PAHs (five to six rings) were predominant, suggesting coal combustion sources. A good correlation existed between most of the PAHs implying that these compounds were emitted from similar sources. The carcinogenic potency B[a]P equivalent concentration (B[a] Peq) at the three power plants ranged from 3.61 to 25.25 indicating a high carcinogenic burden. The highest (B[a] Peq) was found in samples collected around Matla power station. It can therefore be concluded that the soils were contaminated with PAHs originating from coal-fired power stations.     

Nutrient mitigation in a temporary river basin

We estimate the nutrient budget in a temporary Mediterranean river basin. We use field monitoring and modelling tools to estimate nutrient sources and transfer in both high and low flow conditions. Inverse modelling by the help of PHREEQC model validated the hypothesis of a losing stream during the dry period. Soil and Water Assessment Tool model captured the water quality of the basin. The ‘total daily maximum load’ approach is used to estimate the nutrient flux status by flow class, indicating that almost 60 % of the river network fails to meet nitrogen criteria and 50 % phosphate criteria. We recommend that existing well-documented remediation measures such as reforestation of the riparian area or composting of food process biosolids should be implemented to achieve load reduction in close conjunction with social needs.     

Shoreline change and potential sea level rise impacts in a climate hazardous location in southeast coast of India

Climate change impact on the environment makes the coastal areas vulnerable and demands the evaluation of such susceptibility. Historical changes in the shoreline positions and inundation based on projected sea-level scenarios of 0.5 and 1 m were assessed for Nagapattinam District, a low-lying coastal area in the southeast coast of India, using high-resolution Shuttle Radar Topography Mission data; multi-dated Landsat satellite images of 1978, 1991, 2003, and 2015; and census data of 2011. Image processing, geographical information system, and digital shoreline analysis system methods were used in the study. The shoreline variation indicated that erosion rate varied at different time scales. The end point rate indicated the highest mean erosion of ??3.12 m/year, occurred in 73% of coast between 1978 and 1991. Weighted linear regression analysis revealed that the coast length of 83% was under erosion at a mean rate of ??2.11 m/year from 1978 to 2015. Sea level rise (SLR) impact indicated that the coastal area of about 14,122 ha from 225 villages and 31,318 ha from 272 villages would be permanently inundated for the SLR of 0.5 and 1 m, respectively, which includes agriculture, mangroves, wetlands, aquaculture, and forest lands. The loss of coastal wetlands and its associated productivity will severely threaten more than half the coastal population. Adaptation measures in people participatory mode, integrated into coastal zone management with a focus on sub-regional coastal activities, are needed to respond to the consequences of climate change.     

Delineation of groundwater development potential zones in parts of marginal Ganga Alluvial Plain in South Bihar, Eastern India

A part of the Gangetic Alluvial Plain covering 2,228 km², in the state of Bihar, is studied for demarcating groundwater development potential zones. The area is mainly agrarian and experiencing intensive groundwater draft to the tune of 0.12 million cubic metre per square kilometres per year from the Quaternary marginal alluvial deposits, unconformably overlain northerly sloping Precambrian bedrock. Multiparametric data on groundwater comprising water level, hydraulic gradient (pre- and post-monsoon), aquifer thickness, permeability, suitability of groundwater for drinking and irrigation and groundwater resources vs. draft are spatially analysed and integrated on a Geographical Information System platform to generate thematic layers. By integrating these layers, three zones have been delineated based on groundwater development potential. It is inferred that about 48% of the area covering northern part has high development potential, while medium and low development potential category covers 41% of the area. Further increase in groundwater extraction is not recommended for an area of 173 km², affected by over-exploitation. The replenishable groundwater resource available for further extraction has been estimated. The development potential enhances towards north with increase in thickness of sediments. Local deviations are due to variation of—(1) cummulative thickness of aquifers, (2) deeper water level resulting from localised heavy groundwater extraction and (3) aquifer permeability.