“Cold Side” Precipitators

The apparent present effect of regional pollutant loads on crops and forests in the central midwest states was evaluated as part of the Ohio River Basin Energy Study (ORBES). The consequences of the local and regional loadings of SO₂ and O₃ for agricultural yields are summarized as “crop-loss coefficients,” based on the published experimental effects data, and applied to agricultural lands in the Ohio Valley region through regional monitoring of the two pollutant gases. The results are shown as upper and lower bounds containing the most probable crop loss values. The results also are reported as total potential increases in crop yields for the ORBES region, expressed as bushels, appropriate, within the limits of uncertainty, for economic and related energy policy evaluations.     

Ammonia emission factors for N fertilizers applied to two contrasting grassland soils

Ammonia volatilization from nitrogen (N) fertilizer applied throughout the year to two soil types was measured using a system of small wind tunnels. Losses from urea ranged from 12 to 46% of the applied N. Small losses, averaging <1%, were measured from ammonium nitrate (AN) and calcium nitrate applications. Factors influencing these losses are discussed. Using these results and those from other workers, emission factors for urea and AN applications to grassland in the UK were determined as 23.0 and 1.6% of the applied N, respectively. Emission factors for these fertilizers when applied to arable land were estimated as 11.8 and 0.8%, respectively. The emission factor for all other applied N (as straight and compound fertilizers) was assumed to be similar to that for AN. Calculations showed that fertilizer applications to agricultural land in the UK contributes 34 kt NH3-N per year, equivalent to 17% of the total annual NH3 emission.     

Performance/Cost Estimates for Retrofitting Control Technologies

The U.S. EPA’s Air and Energy Engineering Research Laboratory is responsible for assessing control technology performance and costs under the National Acid Precipitation Assessment Program. A major part of this assessment involves developing site-specific estimates of the performance and costs of retrofitting SO₂ and NO_x control technologies for the top 200 SO₂- emitting (1980) coal-fired power plants in the 31-state eastern region. This effort includes detailed evaluation of a small number of plants (30 or less) representing a cross-section of the top 200 population. In cooperation with the states of Ohio and Kentucky (in conjunction with the U.S. EPA’s State Acid Rain Grant Program), efforts were undertaken to visit and conduct detailed evaluation of 12 coal-fired plants—five in Ohio, seven in Kentucky and the Tennessee Valley Authority System. A variety of commercial and advanced SO₂ and NO_x control technologies—including precombustion, combustion (in-furnace), and postcombustion (flue gas cleanup) technologies—were applied to each plant through conceptual designs. Retrofit factors (applied to the capital cost of a new pollution control system), cost “adders” (e.g., movement of existing equipment), and costs were developed for applying the control technologies to the boilers of each plant. Results of these and subsequent efforts will be valuable in evaluations of acid deposition control strategies by federal and state agencies and by electric utilities.     

Modeling particle loss in ventilation ducts

Empirical equations were developed and applied to predict losses of 0.01–100 μm airborne particles making a single pass through 120 different ventilation duct runs typical of those found in mid-sized office buildings. For all duct runs, losses were negligible for submicron particles and nearly complete for particles larger than 50 μm. The 50th percentile cut-point diameters were 15 μm in supply runs and 25 μm in return runs. Losses in supply duct runs were higher than in return duct runs, mostly because internal insulation was present in portions of supply duct runs, but absent from return duct runs. Single-pass equations for particle loss in duct runs were combined with models for predicting ventilation system filtration efficiency and particle deposition to indoor surfaces to evaluate the fates of particles of indoor and outdoor origin in an archetypal mechanically ventilated building. Results suggest that duct losses are a minor influence for determining indoor concentrations for most particle sizes. Losses in ducts were of a comparable magnitude to indoor surface losses for most particle sizes. For outdoor air drawn into an unfiltered ventilation system, most particles smaller than 1 μm are exhausted from the building. Large particles deposit within the building, mostly in supply ducts or on indoor surfaces. When filters are present, most particles are either filtered or exhausted. The fates of particles generated indoors follow similar trends as outdoor particles drawn into the building.     

Nutrient losses by surface run-off following the application of organic manures to arable land. 2. Phosphorus

Phosphorus (P) surface run-off losses were studied following organic manure applications to land, utilising a purpose-built facility on a sloping site in Herefordshire under arable tillage. Different rates and timing of cattle slurry, farm yard manure (FYM) and inorganic nitrogen (N) and P fertiliser were compared, over a 4-year period (1993-97). N losses from the same studies are reported in a separate paper. The application of cattle FYM and, especially slurry, to the silty clay loam soil increased both particulate and soluble P loss in surface water flow. Losses via subsurface flow (30 cm interflow) were consistently much lower than via surface water movement and were generally unaffected by treatment. Increased application of slurry solids increased all forms of P loss via surface run-off; the results suggested that a threshold for greatly increased risk of P losses via this route, as for N, occurred at ca. 2.5-3.0 t/ha solids loading. This approximates to the 50 m3/ha application rate limit suggested for slurry within UK 'good agricultural practice'. The studies also provided circumstantial evidence of the sealing of the soil surface by slurry solids as the major mechanism by which polluting surface run-off may occur following slurry application on susceptible soils. Losses of total and soluble P, recorded for each of the 4 years of experiments, reached a maximum of only up to 2 kg/ha total P (TP), even after slurry applications initiating run-off. Whilst these losses are insignificant in agronomic terms, peak concentrations of P (up to 30,000 micrograms/l TP) in surface water during a run-off event, could be of considerable concern in sensitive catchments. Losses of slurry P via surface run-off could make a significant contribution to accelerated eutrophication on entry to enclosed waters, particularly when combined with high concentrations of NO3(-)-N. Restricting slurry application rates to those consistent with good agronomic practice, and within the limits specified in existing guidelines on good agricultural practice, offers the simplest and most effective control measure against this potentially important source of diffuse pollution.     

Impact of drying and composting procedures on the concentrations of 4-nonylphenols, di-(2-ethylhexyl)phthalate and polychlorinated biphenyls in anaerobically digested sewage sludge

Enhanced treatments of sewage sludge produce a more manageable product for agricultural use by stabilizing the material, removing water, and reducing the possibility of pathogen transfer. We investigated the impact of pilot-scale composting and drying of sludge on physicochemical characteristics and on the concentrations of some organic contaminants. During the 143 day composting procedure, organic matter fell 22% and moisture by half. Concentrations of 4-nonylphenols (4-NPs) fell by 88% and di-(2-ethylhexyl) phthalate (DEHP) by 60%; losses continued throughout the procedure. Losses of total polychlorinated biphenyls (PCBs) were 11%, mostly from the lower molecular weight congeners, suggesting volatilization as the most likely loss mechanism. The drying process was much shorter, 40 days, yet organic matter content decreased by 27% and moisture by 85%. Losses of 4-NPs (39%) and DEHP (22%) were less than in composting and stopped when moisture content became constant. There were no losses of PCBs. Both treatments are simple, practical procedures that reduce the volume of waste and are applicable in situ on farms. Composting would be the method of choice for reducing organic contaminants but requires much longer times than drying.     

Economic damages of ozone air pollution to crops using combined air quality and GIS modelling

This study aims at presenting a combined air quality and GIS modelling methodological approach in order to estimate crop damages from photochemical air pollution, depict their spatial resolution and assess the order of magnitude regarding the corresponding economic damages. The analysis is conducted within the Greater Thessaloniki Area, Greece, a Mediterranean territory which is characterised by high levels of photochemical air pollution and considerable agricultural activity. Ozone concentration fields for 2002 and for specific emission reduction scenarios for the year 2010 were estimated with the Ozone Fine Structure model in the area under consideration. Total economic damage to crops turns out to be significant and estimated to be approximately 43 M€ for the reference year. Production of cotton presents the highest economic loss, which is over 16 M€, followed by table tomato (9 M€), rice (4.2 M€), wheat (4 M€) and oilseed rape (2.8 M€) cultivations. Losses are not spread uniformly among farmers and the major losses occur in areas with valuable ozone-sensitive crops. The results are very useful for highlighting the magnitude of the total economic impacts of photochemical air pollution to the area’s agricultural sector and can potentially be used for comparison with studies worldwide. Furthermore, spatial analysis of the economic damage could be of importance for governmental authorities and decision makers since it provides an indicative insight, especially if the economic instruments such as financial incentives or state subsidies to farmers are considered.     

A Probabilistic Production Costing Analysis of SO2 Emissions Reduction Strategies for Ohio: Emissions,Cost, and Employment Tradeoffs

A new approach for state- and utility-level analysis of the cost and regional economic impacts of strategies for reducing utility SO₂ emissions is summarized and applied to Ohio. The methodology is based upon probabilistic production costing and economic input-output analysis. It is an improvement over previous approaches because it: (1) accurately models random outages of generating units, “must-run” constraints on unit output, and the distribution of power demands; and (2) runs quickly on a microcomputer and yet considers the entire range of potential control strategies from a systems perspective. The input-output analysis considers not only the economic effects of utility fuel use and capital investment, but also those of increased electric rates. Two distinct strategies are found to be most attractive for Ohio. The first, more flexible one, consists of emissions dispatching (ED) alone to meet short run emissions reduction targets. A 75 percent reduction can then be achieved by the turn of the century by combining ED and fuel switching (FS) with flue gas desulfiirization, limestone Injection multistage burners, and physical coal cleaning at selected plants. The second is a scrubber-based strategy which includes ED. By the year 2000, energy conservation becomes a cost effective component of these strategies. In order to minimize compliance costs, acid rain legislation which facilitates emissions trading and places regional tonnage limits on emissions is desirable.     

Economic Assessment of the Effects of Air Pollution on Agricultural Crops in the San Joaquin Valley

Physical and economic impacts of 1978 ambient levels of ozone and sulfur dioxide on 33 crops In the San Joaquin Valley are estimated. The field data regression approach Is used and evaluated for estimating yield losses. The effects of alternative air pollution measures and regression functional forms are evaluated. An economic model is employed that accounts for both farm and market responses to yield improvements from reduced air pollution. Economic damages were estimated to exceed $100 million in 1978 with the biggest losers being the producers of cotton and producers and consumers of grapes, a crop that has heretofore been Ignored in agricultural assessments of pollution damage.     

Improved Ventilation of Open Top Greenhouses

Plant injury caused by air pollutants is a well recognized effect causing economic losses totalling millions of dollars. Farm crops, forest species, and ornamentals are all affected depending upon kind of plant and degree of exposure. Benedict¹ estimated the minimum annual agricultural losses in the U. S. to be $132 million in 1969-1971. Millecan² estimated California crop losses caused by air pollutants to be at least $25 million in 1972. Recent studies by Brewer³ in which conventional greenhouses were placed in the field over cotton gave results showing yields were reduced by 10-30% in the San Joaquin valley where significant levels of photochemical smog occur. However, these estimates of losses represent little more than educated guesses because the procedures available for obtaining the information are so imprecise.     

Occurrence of Eleven Metals in Airborne Participates and in Surficial Materials

The amounts of eleven metals in urban airborne particulate matter samples collected in the United States from 1965 to 1974 (urban and nonurban) are described in two frames of reference: 1) concentration per unit volume of air; and 2) relative abundance in the collected particulate matter compared with surficial materials (subsurface soils) of the continental U. S. If it may be assumed that airborne particulates of solely natural origin would contain these metals in proportions similar to those in uncontaminated subsurface soils, then instances of metals whose proportions in actual particulate samples exceed soil sample proportions may reasonably be ascribed to the influence of human activity. Lead and, tentatively, cadmium exhibit general and significant enrichment in airborne particulate matter above their natural abundances in U. S. soils. Vanadium exhibits enrichment primarily in the northeastern U. S. The enrichment of copper has been traced to contamination from the sampler's own motor. Beryllium, chromium, cobalt, iron, manganese, nickel, and titanium appear to occur in airborne particulates in proportions comparable with those to be expected in natural aeolian dusts.     

The global impact of ozone on agricultural crop yields under current and future air quality legislation

In this paper we evaluate the global impact of surface ozone on four types of agricultural crop. The study is based on modelled global hourly ozone fields for the year 2000 and 2030, using the global 1°×1° 2-way nested atmospheric chemical transport model (TM5). Projections for the year 2030 are based on the relatively optimistic “current legislation (CLE) scenario”, i.e. assuming that currently approved air quality legislation will be fully implemented by the year 2030, without a further development of new abatement policies. For both runs, the relative yield loss due to ozone damage is evaluated based on two different indices (accumulated concentration above a 40 ppbV threshold and seasonal mean daytime ozone concentration respectively) on a global, regional and national scale. The cumulative metric appears to be far less robust than the seasonal mean, while the seasonal mean shows satisfactory agreement with measurements in Europe, the US, China and Southern India and South-East Asia.Present day global relative yield losses are estimated to range between 7% and 12% for wheat, between 6% and 16% for soybean, between 3% and 4% for rice, and between 3% and 5% for maize (range resulting from different metrics used). Taking into account possible biases in our assessment, introduced through the global application of “western” crop exposure–response functions, and through model performance in reproducing ozone-exposure metrics, our estimates may be considered as being conservative.Under the 2030 CLE scenario, the global situation is expected to deteriorate mainly for wheat (additional 2–6% loss globally) and rice (additional 1–2% loss globally). India, for which no mitigation measures have been assumed by 2030, accounts for 50% of these global increase in crop yield loss. On a regional-scale, significant reductions in crop losses by CLE-2030 are only predicted in Europe (soybean) and China (wheat).Translating these assumed yield losses into total global economic damage for the four crops considered, using world market prices for the year 2000, we estimate an economic loss in the range $14–$26 billion. About 40% of this damage is occurring in China and India. Considering the recent upward trends in food prices, the ozone-induced damage to crops is expected to offset a significant portion of the GDP growth rate, especially in countries with an economy based on agricultural production.     

Rural ozone in the southeastern United States

Ozone measurements are reported for five rural sites in the Tennessee Valley region of the southeastern U.S. for periods ranging from 18 to 83 months during the years 1977 through 1984. Rural ozone (O₃) levels were found to equal or exceed urban values for the same region. The daily maximum 1-h average concentration was found to peak during the summer months, while the 24-h average concentrations were greatest in the spring. The annual cycle of daily maximum concentrations is related to the seasonal photochemical cycle. The annual cycle in 24-h average concentrations is best explained by the combined effects of the annual cycles in solar intensity and noctural O₃ depletion. There was no indication that stratospheric intrusions exhibited a significant influence on the annual O₃ cycles. Evidence was found for elevated O₃ levels during touchdown of plumes from large power plants. No long-term trend in rural O₃ concentrations, either daily maxima or means, was discernible.     

Integrated analysis of the effects of agricultural management on nitrogen fluxes at landscape scale

The integrated modelling system INITIATOR was applied to a landscape in the northern part of the Netherlands to assess current nitrogen fluxes to air and water and the impact of various agricultural measures on these fluxes, using spatially explicit input data on animal numbers, land use, agricultural management, meteorology and soil. Average model results on NH₃ deposition and N concentrations in surface water appear to be comparable to observations, but the deviation can be large at local scale, despite the use of high resolution data. Evaluated measures include: air scrubbers reducing NH₃ emissions from poultry and pig housing systems, low protein feeding, reduced fertilizer amounts and low-emission stables for cattle. Low protein feeding and restrictive fertilizer application had the largest effect on both N inputs and N losses, resulting in N deposition reductions on Natura 2000 sites of 10% and 12%, respectively.     

Probabilistic assessment of the potential indoor air impacts of vent-free gas heating appliances in energy-efficient homes in the United States

Use of vent-free gas heating appliances for supplemental heating in U.S. homes is increasing. However, there is currently a lack of information on the potential impact of these appliances on indoor air quality for homes constructed according to energy-efficient and green building standards. A probabilistic analysis was conducted to estimate the impact of vent-free gas heating appliances on indoor air concentrations of carbon monoxide (CO), nitrogen dioxide (NO₂), carbon dioxide (CO₂), water vapor, and oxygen in “tight” energy-efficient homes in the United States. A total of 20,000 simulations were conducted for each Department of Energy (DOE) heating region to capture a wide range of home sizes, appliance features, and conditions, by varying a number of parameters, e.g., room volume, house volume, outdoor humidity, air exchange rates, appliance input rates (Btu/hr), and house heat loss factors. Predicted airborne levels of CO were below the U.S. Environmental Protection Agency (EPA) standard of 9 ppm for all modeled cases. The airborne concentrations of NO₂ were below the U.S. Consumer Product Safety Commission (CPSC) guideline of 0.3 ppm and the Health Canada benchmark of 0.25 ppm in all cases and were below the World Health Organization (WHO) standard of 0.11 ppm in 99–100% of all cases. Predicted levels of CO₂ were below the Health Canada standard of 3500 ppm for all simulated cases. Oxygen levels in the room of vent-free heating appliance use were not significantly reduced. The great majority of cases in all DOE regions were associated with relative humidity (RH) levels from all indoor water vapor sources that were less than the EPA-recommended 70% RH maximum to avoid active mold and mildew growth. The conclusion of this investigation is that when installed in accordance with the manufacturer’s instructions, vent-free gas heating appliances maintain acceptable indoor air quality in tight energy-efficient homes, as defined by the standards referenced in this report.

Implications: Probabilistic modeling of indoor air concentrations of carbon monoxide (CO), nitrogen dioxide (NO₂), carbon dioxide (CO₂), water vapor, and oxygen associated with use of vent-free gas heating appliances provides new data indicating that uses of these devices are consistent with acceptable indoor air quality in “tight” energy-efficient homes in the United States. This study will provide authoritative bodies such as the International Code Council with definitive information that will assist in the development of future versions of national building codes, and will provide evaluation of the performance of unvented gas heating products in energy conservation homes.     

Estimation of Organic Carbon Blank Values and Error Structures of the Speciation Trends Network Data for Source Apportionment

Abstract

Because the particulate organic carbon (OC) concentrations reported in U.S. Environment Protection Agency Speciation Trends Network (STN) data were not blank corrected, the OC blank concentrations were estimated using the intercept in particulate matter ≤2.5 µm in aerodynamic diameter (PM_2.5) regression against OC concentrations. The estimated OC blank concentrations ranged from 1 to 2.4 μg/m³ showing higher values in urban areas for the 13 monitoring sites in the northeastern United States. In the STN data, several different samplers and analyzers are used, and various instruments show different method detection limit (MDL) values, as well as errors. A comprehensive set of error structures that would be used for numerous source apportionment studies of STN data was estimated by comparing a limited set of measured concentrations and their associated uncertainties. To examine the estimated error structures and investigate the appropriate MDL values, PM_2.5 samples collected at a STN site in Burlington, VT, were analyzed through the application of the positive matrix factorization. A total of 323 samples that were collected between December 2000 and December 2003 and 49 species based on several variable selection criteria were used, and eight sources were successfully identi?ed in this study with the estimated error structures and min values among different MDL values from the ?ve instruments: secondary sulfate aerosol (41%), secondary nitrate aerosol (20%), airborne soil (15%), gasoline vehicle emissions (7%), diesel emissions (7%), aged sea salt (4%), copper smelting (3%), and ferrous smelting (2%). Time series plots of contributions from airborne soil indicate that the highly elevated impacts from this source were likely caused primarily by dust storms.     

Energy and emission benefits of chicken manure biogas production: a case study

Studies on the production of biogas of different organic materials in an anaerobic environment are being carried out all over the world. The most important parameters in these researches can be listed as raw material potential, production processes, economic analyses, and environmental effects. Chicken manure is one of the raw materials used in biogas production. In this study, in addition to the analysis of biogas and energy production potential from chicken manure, greenhouse gas emissions were analyzed to evaluate environmental effects. In Turkey, chicken manure is not adequately processed and causes environmental pollution. The model biogas plant and potential energy generation were researched in this field study. The pilot plant produces 8.58 million m³ of biogas per year by processing about 110 thousand tons of waste. It produces 17 GWh/year of electricity and 16 GWh/year of thermal energy, as well as reducing CO₂ greenhouse gas emissions by 13.86 thousand tons/year.

     

Pragmatic estimation of a spatio-temporal air quality model with irregular monitoring data

Statistical analyses of health effects of air pollution have increasingly used GIS-based covariates for prediction of ambient air quality in “land use” regression models. More recently these spatial regression models have accounted for spatial correlation structure in combining monitoring data with land use covariates. We present a flexible spatio-temporal modeling framework and pragmatic, multi-step estimation procedure that accommodates essentially arbitrary patterns of missing data with respect to an ideally complete space by time matrix of observations on a network of monitoring sites. The methodology incorporates a model for smooth temporal trends with coefficients varying in space according to Partial Least Squares regressions on a large set of geographic covariates and nonstationary modeling of spatio-temporal residuals from these regressions. This work was developed to provide spatial point predictions of PM_2.5 concentrations for the Multi-Ethnic Study of Atherosclerosis and Air Pollution (MESA Air) using irregular monitoring data derived from the AQS regulatory monitoring network and supplemental short-time scale monitoring campaigns conducted to better predict intra-urban variation in air quality. We demonstrate the interpretation and accuracy of this methodology in modeling data from 2000 through 2006 in six U.S. metropolitan areas and establish a basis for likelihood-based estimation.     

Examination of the impact of photoexcited NO2 chemistry on regional air quality

Impact of the excited nitrogen dioxide (NO₂¹) chemistry on air quality in the U.S. is examined using the Community Multiscale Air Quality (CMAQ) model for a summer month. Model simulations were conducted with and without the NO₂¹ chemistry. The largest impact of the NO₂¹ chemistry in the eastern U.S. occurred in the northeast and in the western U.S. occurred in Los Angeles. While the single largest daily maximum 8-h ozone (O₃) increased by 9 ppbv in eastern U.S. and 6 ppbv in western U.S., increases on most days were much lower. No appreciable change in model performance statistics for surface-level O₃ predictions relative to measurements is noted between simulations with and without the NO₂¹ chemistry. Based on model calculations using current estimates of tropospheric emission burden, the NO₂¹ chemistry can increase the monthly mean daytime hydroxyl radicals (OH) and nitrous acid (HONO) by a maximum of 28% and 100 pptv, respectively.     

Use of amendments to reduce leaching loss of phosphorus and other nutrients from a sandy soil in Florida

Goal, Scope and Background Transport of P from agricultural land contributes to the eutrophication of surface waters. Soil amendment is considered one of the best management practices (BMPs) to reduce P loss from sandy soils. Laboratory column leaching experiments were conducted to evaluate the effectiveness of different soil amendments in reducing P leaching from a typical sandy soil in Florida. Methods The tested amendments were CaCl₂, CaCO₃, Al(OH)₃, cellulose, and mill mud, and applied at the rate of 15 g/kg for a single amendment and each 7.5 g/kg if two amendments were combined. Leaching was conducted every four days for 32 days, 250 mL of deionized water being leached for each column per leaching event. Leachates were collected from each leaching event and analyzed for reactive P, PO₄-P, and macro and micro-elements. Results and Discussion Except for the soils amended with CaCl₂, or CaCl₂+CaCO₃, reactive P and PO₄-P leaching losses mainly occurred in the first three leaching events. Phosphorus leaching from the soils amended with CaCl₂ or CaCl₂+CaCO₃ was less but more persistent than that of other amendments. Reactive Pleaching loss was reduced by 36.0% and 40.4% for the amendments of CaCl₂, and CaCl₂+CaCO₃, respectively, as compared with chemical fertilizer alone, and the corresponding values for PO₄-P were 70.8% and 71.9%. The concentrations of K, Mg, Cu, and Fe in leachate were also decreased by CaCl₂ or CaCl₂+CaCO₃ amendment. Among the seven amendments, CaCl₂, CaCO₃, or their combination were most effective in reducing P leaching from the sandy soil, followed by cellulose and Al(OH)₃, the effects of mill mud and mill mud + Al(OH)₃ were marginal. Conclusions These results indicate that the use of CaCl₂, CaCO₃, or their combination can significantly reduce P leaching from sandy soil, and should be considered in the development of BMPs for the sandy soil regions. Recommendations and Outlook Most agricultural soils in south Florida are very sandy with minimal holding capacities for moisture and nutrients. Repeated application of fertilizer is necessary to sustain desired yield of crops on these soils. However, eutrophication of fresh water systems in this area has been increasingly concerned by the public. Losses of P from agricultural fields by means of leaching and surface runoff are suspected as one of the important non-point contamination sources. The benefits and effectiveness of soil amendment in reducing P losses from cropping production systems while sustaining desired crop yield need to be demonstrated. Calcium chloride, CaCO₃, or their combination significantly reduce Pleaching from sandy soil, and should be considered in the development of BMPs for the sandy soil regions.