Estimation of Pollutant Transport and Concentration Distributions over Complex Terrain of Southern California Using Airborne Lidar

Airborne lidar data collected during the South Coast Air Basin/Southeast Desert Oxidant Transport Study in summer 1981 were used to provide estimates of concentration distributions of particles and oxidants, and of pollutant transport in mountain passes and over mountain slopes. The results support the idea that for certain situations, given a few representative in situ measurements for use in calibration, airborne lidar might be used to develop detailed concentration fields. When combined with appropriate measurements of wind speed profiles with height, useful estimates of pollutant transport flux might also be provided.     

Neural Network Model for Predicting Peak Photochemical Pollutant Levels

ABSTRACT

In this paper, an attempt is made for the 24-hr prediction of photochemical pollutant levels using a neural network model. For this purpose, a model is developed that relates peak pollutant concentrations to meteorological and emission variables and indexes. The analysis is based on measurements of O₃ and NO₂ from the city of Athens. The meteorological variables are selected to cover atmospheric processes that determine the fate of the airborne pollutants while special care is taken to ensure the availability of the required input data from routine observations or forecasts. The comparison between model predictions and actual observations shows a good agreement. In addition, a series of sensitivity tests is performed in order to evaluate the sensitivity of the model to the uncertainty in meteorological variables. Model forecasts are generally rather insensitive to small perturbations in most of the input meteorological data, while they are relatively more sensitive in changes in wind speed and direction.     

Surface Air Pollutant Concentration Frequency Distributions: Implications for Urban Modeling

With the development of ambient air quality standards (AAQS), the need arises to describe the characteristics of regional surface air-pollutant concentration frequency distributions. In the evaluation of land use plans, numerous agencies will be concerned with evaluating the effectiveness of emission zoning and/or control actions. On a regional basis, one means of performing this assessment lies in determining the changes in the pollutant frequency distributions resulting from control actions.

This study presents new data concerning the surface air-pollutant concentration frequency distributions observed for area sources and continuous point sources, and compares these distributions with those of the pertinent meteorological variables describing the transport and diffusion of the pollutant. The observed surface air pollutant frequency distributions are compared to those corresponding to simple modeling concepts from either an urban area source or a continuous point source. For an urban source and a relatively inert pollutant like CO, we found that the observed frequency distribution for CO surface air concentration parallels the approximately log-normal frequency distribution of the reciprocal of the wind speed. We show that the constant relating these two well-correlated frequency distributions can be determined either experimentally or with a numerical simulation model of air pollution. The usefulness of numerical models in air pollution is discussed.     

A Simple Technique for Measuring Mean H2S Concentration

Lead acetate impregnated ceramic tiles are useful devices for determining H₂S levels in the outdoor air. The exposure of tiles in simple shelters and for an overnight period is effective in an areawide sampling program to determine: (1) whether a significant H₂S source exists, (2) the source location, (3) the area affected, and (4) the relative intensity pattern.

On the basis of an overnight exposure, tiles can “see” a mean H₂S concentration range of 0.003 to 0.3 ppm. The lower level of sensitivity is near 0.03 ppm X hr. Hence, tiles offer a way to verify whether hourly air quality standards are being exceeded.

Tiles can be qualitatively evaluated against: experience, known effects, or by ranking against each other. Tiles can be semi-quantitatively evaluated by visual grading against painted standards developed by exposing tiles of particular manufacture to known H₂S dosages.     

循环流化床锅炉污染物排放量的环评计算

在常用燃煤锅炉污染物排放量计算经验公式的基础上，结合循环流化床锅炉中石灰石与二氧化硫反应的原理，推算出其污染物排放量及排放浓度的计算公式，并对锅炉污染物排放量的环评计算提出了原则性的建议。     

燃煤倒焰窑烟尘污染的治理

燃煤倒焰窑烟尘治理，因其本身结构特点，若单纯采用末端治理，则投资大，治理效果不稳定，在治理上存在一定难度。通过实践，采用炉头增氧，尾部喷淋的治理工艺可以达到好的治理效果，而且投资少，工期短，运行费用低，易于操作。     

Important Considerations for Establishing a Secondary Ozone Standard to Protect Vegetation

Air quality standards are established to prevent or minimize the risk of adverse effects from air pollution to human health, vegetation, and materials. In order to develop standards which provide an adequate measure of protection to vegetation, it is necessary to define, in as precise terms as possible, the relationship between ambient air quality and the potential for adverse effects on vegetation. Based on recent evidence published in the literature, as well as retrospective studies using data from the National Crop Loss Assessment Network (NCLAN), cumulative indices can be used to describe exposures of ozone for predicting agricultural crop effects. However, the mathematical form of the standard that may be proposed to protect crops does not necessarily have to be of the same form as that used in the statistical or process oriented mathematical models that relate ambient ozone exposures with vegetation effects. This paper discusses the limitations associated with applying a simple statistic that may take the place of a more biologically meaningful exposure parameter. While the NCLAN data have been helpful in identifying indices that may be appropriate for establishing exposure-response relationships, the limitations associated with the NCLAN protocol need to be considered when attempting to apply these relationships in the establishment of a secondary national ambient air quality standard. The Weibull model derived from NCLAN experiments must demonstrate its generality and universal applicability. Furthermore, its predictive power must be tested using independent sets of field data.     

Consideration of Air Quality Standards for Vegetation With Respect to Ozone

Present evidence suggests that ozone is the most damaging of all air pollutants affecting vegetation. It is the principal oxidant in the photochemical smog complex. Concentrations of ozone have exceeded 0.5 part per million (ppm) in the Los Angeles area. One-tenth of this level for 8 hours is known to injure very sensitive tobacco varieties. Many plant species are visibly affected after a few hours exposure at concentrations much lower than 0.5 ppm. There is also some evidence that ozone reduces plant growth. Many factors must be taken into account when considering standards to protect vegetation from ozone damage. These include ozone concentration and methods of measurement, time of exposure, possible additive effects of other pollutants, sensitivity of plant species, their economic value, and the extent of injury which can be tolerated. The response of a species to the pollutant is conditioned by genetic factors and environmental conditions. Lack of specific routine methods for measuring ozone in ambient air is a handicap. California and Colorado established standards for oxidants at 0.15 and 0.10 ppm, respectively, for 1 hour. How these standards relate to the ozone dosage causing acute and chronic injury to various plant species is discussed.     

Terrain classification and derived meteorological parameters for interregional transport models

A procedure is outlined to incorporate surface characteristics in air pollution models. Deposition velocity, energy exchange and surface roughness are considered, because the knowledge of these parameters is essential in more advanced transport models, which no longer use the Pasquill stability scheme. An estimate of the terrain properties is obtained by inspection of land maps. For this purpose land maps with a scale 1: 250.000 are used. On areas of 10′ × 10′ (minutes of arc) the following terrain types are distinguished: water, open field, open field with scattered trees and hedges, wood, built-up areas and roads and railways. A procedure is outlined to derive from this classification the surface heat flux, deposition velocity and surface roughness. The method for the surface roughness is compared with a procedure of Smith and Carson (1977, Boundary-Layer Met. 12, 307–330) for the determination of the surface roughness in the United Kingdom.     

Pollutant Emission Factors for the Ceramic Floor and Wall Tile Industry

After a short review on production technology of ceramic floor and wall tile, the main feature of pollutant emissions from each production phase are outlined. On the basis of thousands of measurements carried out by the Centro Ceramico of Bologna on most of the Italian ceramic factories, the variation ranges of pollutant concentrations in stack emissions are shown, and the respective emission factors are calculated. The results obtained show that the ceramic industry is relatively clean, in comparison with other industries, although some environmental problems were found in areas with particularly high concentrations of ceramic factories.     

A Wind Tunnel Study to Design Large,Open-top Chambers for Whole-tree Pollutant Exposure Experiments

A wind tunnel study was conducted to determine the optimal design features of a large, open-top chamber, as needed for pollution exposure studies on mature trees. An optimally-designed, open-top chamber must minimize the incursion of ambient air through its opening and maintain a uniform treatment concentration throughout the chamber. The design features of interest are the diameter and height of the chamber and the deflection angle and opening size of any frustum that may be mounted on top of a model chamber.

Design specifications depend on the turbulence regime about the chamber, which is influenced by the nature of the surrounding vegetation. Consequently, our investigation was performed on scale-model, open-top chambers in a wind tunnel populated with a model coniferous forest. Turbulence measurements demonstrated the similarity between the turbulence regime of the model and a natural forest. A hydrocarbon tracer was injected into the wind tunnel flow to characterize chamber performance.

The main design features of open-top chambers are the velocity of air exiting through the top and the relationship between the length scale of the turbulence and the diameter of the chamber opening. As exit velocities increase, the proportion of eddies with sufficient force to penetrate into the chamber decrease. Therefore, for equal volumetric air flows, smaller opening sizes increase the exit velocities and reduce the number and extent of ambient air incursions. Almost total exclusion of ambient air is achieved as the exit velocity of the air exceeds the magnitude of one standard deviation of the vertical wind velocity measured at the chamber top. The incursion of ambient air is also reduced when the diameter of the chamber opening is smaller than the characteristic length scale of the turbulence, a measure of mean eddy size.

Frusta deflect air flow over the chamber. Three prototypes, with 30?, 45? and 60-degree angles were tested. A 30-degree frustum slightly improves the performance of the chamber and is more effective in preventing ambient air from entraining into the chamber opening than frusta with either a 45? or 60-degree angle. A flatter frustum allows for a smoother transition in the wind velocity streamline and is less apt to cause wake turbulence, as is the case with steeper frusta.

Knowledge of the turbulence characteristics of plant canopies are readily available in the literature and can aid scientists and engineers in designing the optimal chamber and frusta dimensions for their particular application. Therefore, the empirical approach to chamber design can be avoided, and substantial savings can be realized.     

TiO2光催化氧化技术的研究及其在污染治理中的应用

探讨了TiO2光催化氧化技术的机理及其在空气净化、水处理、抗菌防污中的应用,指出了目前研究中存在的一些问题和解决办法.     

Nonmethane Organic Compound to Nitrogen Oxide Ratios and Organic Composition in Cities and Rural Areas

The observed ranges in nonmethane organic compound (NMOC) concentrations, NMOC composition and nitrogen oxides (NO_X) concentrations have been evaluated for urban and nonurban areas at ground level and aloft of the contiguous United States. The ranges in NMOC to NO_X ratios also are considered. The NMOC composition consistently shifts towards less reactive compounds, especially the alkanes, in air parcels over nonurban areas compared to the NMOC composition near ground level within urban areas. The values for the NMOC to NO_X ratios, 1.2 to 4.2, in air aloft over nonurban areas are lower than in air at ground level urban sites, ≥8, and much lower than in air at ground level nonurban sites, ≥20.

The layers of air aloft over a number of nonurban areas of the United States tend to accumulate NO_X emissions from the tall stacks of large fossil fuel power plants located at nonurban sites. During the night into the morning hours, the air aloft is isolated from any fresh NMOC emissions predominately coming from near surface sources. Conversely, during this extended period of restricted vertical mixing, air near the surface accumulates NMOC emissions while this air is isolated from the major NO_X sources emitting aloft. These differences in the distribution of NMOC and NO_X sources appear to account for the much larger NMOC to NO_X ratios reported near ground level compared to aloft over nonurban areas.

Two types of experimental results are consistent with these conclusions: (1) observed increases in surface rural NO_X concentrations during the morning hours during which the mixing depth increases to reach the altitude at which NO_X from the stacks of fossil fuel power plants is being transported downwind; (2) high correlations of total nitrate at rural locations with Se, which is a tracer for coal-fired power plant NO_X emissions.

The implications of these conclusions from the standpoint of air quality strategies are suggested by use of appropriate scenarios applied to both urban and regional scale photochemical air quality models. The predictions from urban model scenarios with NMOC to NO_X ratios up to 20 are that NO_X control will result in the need for the control of more NMOC emissions than necessary in the absence of NO_X control, in order to meet the O₃ standard. On a regional scale, control of NO_X emissions from fossil fuel power plants has little overall effect regionally but does result on a more local scale in both small decreases and increases in O₃ concentrations compared to the baseline scenario without NO_X control. The regional modeling results obtained to date suggest that NO_X control may be effective in reducing O₃ concentrations only for a very limited set of conditions in rural areas.     

The Use of Artificial Activable Trace Elements to Monitor Pollutant Source Strengths and Dispersal Patterns

A tracer technique using certain of the rare earth elements which are easily activated by neutrons has been developed for the analysis of air pollution problems. Studies employing these tracers were made to determine whether the available meteorological dispersion models can be used effectively to describe pollution emissions from selected industries in the vicinity of Albany, Oregon. The Gaussian plume model was found to be satisfactory for the moderately intense turbulence fields which characterize Stability Types B, C, and D, including cases in which the pollution was trapped by an inversion layer aloft. For sources near ground level, however, it was necessary to make allowance for urban influences on plume dispersion. A box model best described the observed dispersal pattern when the upward penetration of the very intense turbulence of Stability Type A was limited by an inversion layer aloft. These meteorological models were applied using a “blind” experimental procedure to predict the emission rates of the effluent from multiple sources of air pollution in the Albany area. It was found that these techniques can be used to predict the rate of emission within a factor of two for multiple sources consisting of three stacks.     

Facilities and Techniques for Maintaining a Controlled Fluoride Environment in Vegetation Studies

The principle of fabric filtration has only recently been accepted for fossil fuel fired boiler particulate emissions control. Information on design criteria is, therefore, limited. The paper provides data on the few installations where baghouses have been installed and successfully operated. The general conclusion is that a strong relationship exists between air to cloth ratio and bag life.     

Summer Ozone Concentrations in Southern Ontario in Relation to Photochemical Aspects and Vegetation Damage

In the summers of 1960 and 1961, groups from the Canada Department of Agriculture, the Meteorological Service of Canada, and the Canada Department of National Health and Welfare conducted a joint study in a tobacco-growing area along the north shore of Lake Erie. The purpose of the study was to determine the causal agent for weather fleck damage to tobacco crops. A number of air pollutants were monitored and the results correlated with extensive observations of meteorological phenomena and effects on rate of growth and fleck damage to leaves of tobacco plants in experimental plots. Ozone concentrations followed a diurnal cycle, rising a few hours after sunrise, peaking in early afternoon at about 5 pphm, and dropping to a minimum of less than 1 pphm during the night. Other measurements indicated the presence of NO₂ in the order of 1 pphm, aldehydes about 0.2 pphm or lower, and negligible concentrations of SO₂. Cracking of stretched rubber strips followed the ozone values although, in general, the cracking index was greater than could be attributed to ozone (by oxidized KI) alone. The maximum ozone value recorded during the two growing seasons was IS pphm. A dosage of 20 pphm-hr was found sufficient to cause weather fleck or ozone damage to susceptible tobacco leaves. In addition meteorological data could be used to predict weather fleck attacks one to four days in advance.     

Using Various Guidelines and Approaches for the Assessment of Marine Sediment Quality

The aim of the present study is to explore the implications of using different quality guidelines and approaches for marine sediment characterization. As a case study, the sediments of Souda Port, Crete, Greece, were examined in order to assess heavy metal contamination and to estimate anthropogenic contribution and potential adverse effects to aquatic environment, as well as to indicate feasible future management options. The concentration of six heavy metals (Co, Cr, Cu, Ni, Pb, and Zn) was determined and compared with different sediment quality guidelines (SQGs) and regional/national criteria established for dredged material characterization and management. In addition, the geo-accumulation index (I_geo) was calculated and the sediments toxicity and heavy metals bioavailability were determined. Based on the experimental data, it is deduced that Souda sediments are characterized as moderately polluted only in terms of Co, Ni, and Pb.