Nationwide Air Pollution Control Training Efforts: Status Quo vs. Needs

This paper briefly reviews the historical development of air pollution training activities in the U. S. It describes the various types of training programs currently available, such as short courses, specialized programs, and university training at the graduate level. The level of financial support and the number of individuals enrolled in these programs are discussed. The paper concludes with an outline of future needs in terms of changes in existing training programs, extension into new areas, and the critical problem of recruitment of qualified candidates for training.     

A Cost-Benefit Approach to Air Pollution Control

Air pollution has plagued the urban areas of our Nation for many years, both as a serious health hazard and as a costly economic burden. Users of the air as a waste disposal medium have treated it as a free resource with no regard for the damages incurred by receptors of the dirty air. Unfortunately, no self-regulating market forces exist that will bring this diseconomy into an acceptable equilibrium. An outside regulating force, which can affect abatement of air pollution, is needed to achieve control of air pollution to a level acceptable to a community. A prerequisite of any proposed regulatory action to be applied by an outside force, however, is the need to define an acceptable level of pollution. One means of accomplishing the task is to apply an economic evaluation, in the form of a cost-benefit analysis, to the problem. Previous analyses of the economic aspects of air pollution have stressed only one side of the problem. That is, they have dealt only with the cost of control or the damages caused by air pollution. No analysis has combined both aspects into a meaningful analysis of the overall economic impact. The objective of this paper is to present a technique that can be used to find the level of pollution abatement in an area that balances the cost of controlling pollution with the benefits received from its control. To present a clearer picture of this technique and its results, it has been applied to the Washington, D. C. area to find the optimum level of particulate abatement. This method is generally applicable to any area, in which an air pollution problem exists.     

Careers in Air Pollution Control

Abstract

The destruction of parts per million (ppm) levels of volatile organic compounds in a dry air stream by high–energy electron–beam irradiation has been investigated in a pilot plant at the University of Tennessee Space Institute, Tullahoma, Tennessee. In a series of experiments, dry air contaminated with various VOCs in the concentration range of 50–1000 ppm were treated in the UTSI pilot plant to determine the extent of destruction at various electronbeam dose levels.

The destruction removal efficiency was determined as a function of the electron beam irradiation dose. The results suggest a charge transfer reaction as the major decomposition mechanism. A theoretical foundation of the process, along with a simple first–generation reaction kinetics model, a summary of the results from the pilot plant flow reactor, and a preliminary cost analysis for a fullscale detoxification plant using currently available electronbeam gun technology are presented in this paper.     

Air Pollution Control Philosophies

Most air pollution control programs rest on one or more of the following four basic philosophies: emission standards, air quality standards, emission taxes, and cost benefit analysis. Frequently they rest on mixtures or combinations of these four. This paper examines each of the four separately, tries to show why each is different from the others, and compares their advantages and disadvantages.     

Certification Programs in Air Pollution Control

When the questionnaire form for Consultant Guide/1972 was published in the APCA Journal early this year, it included space for an indication of any certifications granted to a consultant by the three Boards which have established standards for professional activity in the field of air pollution control. The editorial staff, well aware of these Boards, was surprised at the number of requests received by phone and mail for information concerning the certification programs. In response to these requests we are publishing on the following three pages invited statements from principals of the three Boards outlining the procedures involved in applying for professional certification.     

Air Monitoring Reflects Air Pollution Control Activity

Air monitoring by the A.I.S.I. filter sampling device which both preceded and was concurrent with source control of particulates demonstrated air quality improvement over a ten-year period. A difference in improvement from that estimated by the pollution control agency resulted from difference in the measurement parameters.     

Careers in Air Pollution Control Monitoring-Surveillance

ABSTRACT

The temporal and longitudinal characteristics of volatile organic compound (VOC) emissions from the aeration units of a publicly owned treatment works (POTWs) have been investigated by systematic monitoring and mathematical modeling. Field tests have been conducted at a 120-mgd wastewater treatment plant to investigate the hourly, weekly, and seasonal changes of VOC emissions. Variations of VOC emissions along the length of the aeration units have been tested and modeled. Most VOCs have decreasing concentration profiles. Henry's law coefficients and biodegradation constants for the detected compounds have been validated with the improved models and the field test data. More than one-half of the emissions were found to have been generated from the first one-third of the aeration unit length.     

Engineeringand MaintainingIn-Plant Air Pollution Control

Informative Report No. 7 on the inedible rendering industry is one of a series of survey reports prepared by APCA’ TI-2 Committee on air pollution problems and control methods encountered in the chemical industry today.     

室内空气污染与控制

论述了造成室内空气污染的主要原因，分析了室内空气污染的特点及其危害，并结合房屋建筑过程以及人们日常生活的各个方面，提出了预防及控制室内空气污染的具体方法。     

Designing for Air Pollution Control

This paper was one of several presented at the Workshop on Air Pollution Control in Portland, Oregon, on May 6, 1968. The Workshop was sponsored by the Manufacturing Chemists Association and the Chemical Industry Council of the Pacific Northwest in cooperation with the Association of Oregon Industries, Association of Washington Industries, and the Environmental Committee of the Portland Chamber of Commerce. While many of the papers were of localized interest, this paper speaks to anyone designing air pollution control systems.     

Careers in Air Pollution Control Plant Pathology

ABSTRACT

Profiles of the sources of nonmethane organic compounds (NMOCs) were developed for emissions from vehicles, petroleum fuels (gasoline, liquefied petroleum gas [LPG], and natural gas), a petroleum refinery, a smelter, and a cast iron factory in Cairo, Egypt. More than 100 hydrocarbons and oxygenated hydrocarbons were tentatively identified and quantified. Gasoline-vapor and whole-gasoline profiles could be distinguished from the other profiles by high concentrations of the C₅ and C₆ saturated hydrocarbons. The vehicle emission profile was similar to the whole-gasoline profile, with the exception of the unsaturated and aromatic hydrocarbons, which were present at higher concentrations in the vehicle emission profile. High levels of the C₂-C₄ saturated hydrocarbons, particularly n-butane, were characteristic features of the petroleum refinery emissions. The smelter and cast iron factory emissions were similar to the refinery emissions; however, the levels of benzene and toluene were greater in the former two sources. The LPG and natural gas emissions contained high concentrations of n-butane and ethane, respectively. The NMOC source profiles for Cairo were distinctly different from profiles for U.S. sources, indicating that NMOC source profiles are sensitive to the particular composition of petroleum fuels that are used in a location.