微型舱模拟室内环境中活性炭净化甲醛的能力

利用微型实验舱(0.04 m3)模拟室内甲醛环境进行活性炭吸附实验,研究吸附后甲醛浓度随时间的变化趋势,计算活性炭对甲醛的净化效率、吸附速率和饱和吸附量,探索活性炭对室内甲醛的吸附规律.研究发现,当甲醛含量为0 ～0.40 mg,活性炭用量为0.5g时,舱内甲醛浓度随时间延长呈指数递减变化趋势,吸附后0～0.5 h甲醛浓度递减得最快,0.5～2h递减速度变缓,2～4h甲醛浓度基本上保持不变;研究E0A1、E1A4曲线斜率K及活性炭甲醛净化效率发现,每次吸附过程活性炭吸附2h可达到吸附平衡,活性炭进行3次吸附平衡即可达到吸附饱和,每次实验第一次吸附过程、每次吸附过程前半小时活性炭对甲醛的吸附能力最强;活性炭的吸附速率在吸附初期迅速降低,最后趋近于0;等量椰壳活性炭在一定浓度的污染物环境中饱和吸附量是个定值.说明使用活性炭净化室内甲醛有一定的规律可循.     

活性炭纤维对水中微囊藻毒素的吸附性能

利用活性炭纤维对水中微囊藻毒素MC—LR的吸附,研究了吸附过程的热力学与动力学特性。结果表明,活性炭纤维对MC—LR的平衡吸附量在相同温度下随MC-LR初始浓度的增加而显著增大,并随着温度升高而增加,最大吸附量达246μg／g。不同温度条件下,活性炭纤维对MC-LR的吸附均较好地符合Langmuir等温吸附模型。通过热力学分析发现,△H=15．7kJ／mol、△G〈0、△S〉0,表明该吸附是自发的、吸热的过程,温度升高有利于吸附反应。动力学研究表明,该过程符合一级动力学方程。吸附反应速率受颗粒内扩散和液膜扩散共同影响。活性炭纤维经再生后,平衡吸附量变化较小,具有良好的重复使用性能。     

Adsorption of mercury by activated carbon prepared from dried sewage sludge in simulated flue gas

Conversion of sewage sludge to activated carbon is attractive as an alternative method to ocean dumping for the disposal of sewage sludge. Injection of activated carbon upstream of particulate matter control devices has been suggested as a method to remove elemental mercury from flue gas. Activated carbon was prepared using various activation temperatures and times and was tested for their mercury adsorption efficiency using lab-scale systems. To understand the effect of the physical property of the activated carbon, its mercury adsorption efficiency was investigated as a function of its Brunauer–Emmett–Teller (BET) surface area. Two simulated flue gas conditions, (1) without hydrogen chloride (HCl) and (2) with 20 ppm HCl, were used to investigate the effect of flue gas composition on the mercury adsorption capacity of activated carbon. Despite very low BET surface area of the prepared sewage sludge activated carbons, their mercury adsorption efficiencies were comparable under both simulated flue gas conditions to those of pinewood and coal activated carbons. After injecting HCl into the simulated flue gas, all sewage sludge activated carbons demonstrated high adsorption efficiencies, that is, more than 87%, regardless of their BET surface area.

Implications: We tested activated carbons prepared from dried sewage sludge to investigate the effect of their physical properties on their mercury adsorption efficiency. Using two simulated flue gas conditions, we conducted mercury speciation for the outlet gas. We found that the sewage sludge activated carbon had mercury adsorption efficiency comparable to pinewood and coal activated carbons, and the presence of HCl minimized the effect of physical property of the activated carbon on its mercury adsorption efficiency.     

Adsorption characteristics of 2,4-dichlorophenoxyacetic acid (2,4-D) from aqueous solution on powdered activated carbon

The removal of 2,4-dichlorophenoxyacetic acid (2,4-D), one of the most commonly used phenoxy acid herbicides, from aqueous solution was studied by using acid-washed powdered activated carbon (PAC) as an adsorbent in a batch system. Adsorption equilibrium, kinetics, and thermodynamics were investigated as a function of initial pH, temperature, and initial 2,4-D concentration. Powdered activated carbon exhibited the highest 2,4-D uptake capacity of 333.3 mg g(-1) at 25 degrees C and an initial pH value of 2.0. Freundlich, Langmuir, and Redlich-Peterson isotherm models were used to express the equilibrium data of 2,4-D depending on temperature. Equilibrium data fitted very well to the Freundlich equilibrium model in the studied concentration range of 2,4-D at all the temperatures studied. Three simplified models including pseudo-first-order, pseudo-second-order, and saturation-type kinetic models were used to test the adsorption kinetics. It was shown that the adsorption of 2,4-D on PAC at 25, 35, and 45 degrees C could be best fitted by the saturation-type kinetic model with film and intraparticle diffusions being the essential rate-controlling steps. The activation energy of adsorption (EA) was determined as--1.69 kJ mole(-1). Using the thermodynamic equilibrium coefficients obtained at different temperatures, the thermodynamic constants of adsorption (deltaG degrees, deltaH degrees, and deltaS degrees) were also evaluated.     

Adsorption kinetics and modeling of H2S by treated waste oil fly ash

Waste oil fly ash (OFA) collected from disposal of power generation plants was treated by physicochemical activation technique to improve the surface properties of OFA. This synthesized material was further used for potential hydrogen sulfide (H₂S) adsorption from synthetic natural gas. The raw OFA was basically modified with a mixture of acids (20% nitric acid [HNO₃] and 80% phosphoric acid [H₃PO₄]), and it was further treated with 2 M potassium hydroxide (KOH) to enhance the surface affinity as well as surface area of synthesized activated carbon. Correspondingly, it enhanced the adsorption of H₂S. Crystallinity, surface morphology, and pore volume distribution of prepared activated carbon were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) analyses. Fourier transform infrared (FTIR) study was also performed to identify the functional groups during different synthesis stages of modified activated carbon. The Langmuir, Freundlich, Sips, and dual-site Langmuir (DSL) models were used to study the kinetic and breakthrough behavior of H₂S adsorption over alkali-modified activated carbon. Modeling results of isotherms indicated that OFA has dual sites with high and low affinity for H₂S adsorption. The Clark model, Thomas model, and Yoon-Nelson model were used to examine the effects of flow rate and inlet concentration on the adsorption of H₂S. Maximum uptake capacity of 8.5 mg/g was achieved at 100 ppm inlet concentration and flow rate of 0.2 L/min.

Implications: Utilization of worthless oil fly ash from power plant is important not only for cleaning the environment but also for solid waste minimization. This research scope is to eradicate one pollutant by using another pollutant (waste ash) as a raw material. Chemical functionalization of synthesized activated carbon from oil fly ash would lead to attachment of functional groups of basic nature to attract the acidic H₂S. Such type of treatment can enhance the uptake capacity of sorbent several times.     

黑曲霉死菌与活性炭对直接耐晒翠蓝FBL的吸附性能

采用批式实验,系统考察了黑曲霉死菌和活性炭的粉剂投加量,染料初始浓度,pH和反应时间对酞菁染料FBL脱色效果的影响;并采用扫描电镜图像,分析吸附剂的结构变化。结果表明,对于FBL染料的吸附处理,黑曲霉死菌粉剂与活性炭粉剂适宜的吸附条件为:酸性至弱碱性pH下,投加量为8 g/L;黑曲霉死菌粉剂比活性炭粉剂的吸附速度快、脱色性能高、抗染料浓度负荷冲击能力强。扫描电镜图像分析显示,黑曲霉死菌粉剂所具有的多层纤维结构为吸附染料分子提供较大的比表面。     

Adsorption Characteristics of Activated Carbon and XAD4 Resin for the Removal of Hazardous Organic Solvents

A comparative study has been conducted on adsorption/desorption of six hazardous organic vapors on synthetic resin (XAD4) and activated carbon, using a differential reactor involving the expansion of a quartz spring. While both sorbents can effectively remove the organic vapors, it was observed that at low concentrations activated carbon adsorbed more organic vapor than synthetic resin. At higher, industrial concentrations, the resins adsorbed more vapor as demonstrated by the slopes of the equilibrium isotherms. The resin also showed much higher desorptlon.

The effective Intraparticle diffusion coefficients (D_e) were observed to be strongly dependent on solute concentration. Pore diffusion dominated the adsorption/desorption of the six organic vapors on XAD4 resin. For the carbon system, pore diffusion dominated the adsorption but surface diffusion contributed to the desorptlon process. This is believed to be due to higher Interaction of the adsorbates with activated carbon.     

表面活性剂改性活性炭对阳离子染料的吸附

以阴离子表面活性剂十二烷基硫酸钠(SDS)为改性剂对粉末活性炭(AC)改性,研究了SDS在活性炭表面的吸附稳定性,用比表面积测定仪、Zeta电位测定仪对改性前后活性炭进行表征,并将其用于吸附模拟废水中的阳离子染料。结果表明,改性剂SDS浓度等于临界胶束浓度时,改性后活性炭(SDS-AC)对SDS吸附稳定,SDS在纯水和染料溶液中的解吸率分别为19.4%和1.6%。pH对活性炭吸附阳离子橙染料影响较小,SDS-AC和AC对染料的吸附平衡时间分别为4 h和12 h,SDS-AC和AC对阳离子橙染料的吸附动力学模型符合拟二级反应模型,吸附等温线更符合Langmuir吸附等温方程,SDS-AC对阳离子橙染料的最大吸附量较AC提高47.8%,SDS-AC对阳离子橙染料的吸附机制为物理吸附和化学吸附共同作用下的单分子层吸附,其中化学吸附是主要控速步骤。     

活化赤泥的除氟性能

以成本低的铝工业废矿渣（赤泥）为原材料,通过高温煅烧和酸化处理对赤泥进行活化,制备了除氟吸附剂。研究了反应时间、投加量、初始氟浓度、溶液温度、共存阴离子和pH值对活化赤泥除氟效果的影响。结果表明,接触反应时间为18 h时,吸附接近平衡。活化赤泥对氟离子的吸附符合Lagergren二级吸附动力学方程。另外,初始浓度越高,吸附容量越大。与Freundlich相比,Langmuir吸附等温模型可以更好地描述氟离子的吸附特性,最大吸附量可达2.71 mg/g。SO24-、Cl-和NO3-存在时（〈1 000 mg/L）,对氟离子的吸附几乎没有影响,然而,HCO3-、PO34-和氟离子共存时,会对氟吸附造成不利影响。活化赤泥在pH值3.5～11.0时,具有较好的吸附稳定性。活化赤泥是一种吸附容量高、性能稳定的环境友好型除氟材料,具有应用潜力。     

Adsorption isotherms of 17beta-estradiol on granular activated carbon (GAC).

The adsorption characteristics of three types of activated carbon for 17beta-estradiol were studied by long term experiments to assess the time which is necessary to reach equilibrium between the solid and the liquid phase. The adsorption kinetics were measured by liquid scintillation counting using radio-labelled 17beta-estradiol at various concentrations of 17beta-estradiol in the ppt range. 17beta-estradiol is quickly adsorbed and conditions close to equilibrium were reached after 50-180 min. The equilibrium concentrations were calculated to be at 49-81% of the initial concentration in the concentration range between I and 100 ng/l, with 0.51 ng/l for a 1 ng/l and between 5.9 and 14.6 ng/l for 100 ng/l initial concentration.     

黄麻纤维活性炭对亚甲基蓝和甲基橙吸附动力学

以黄麻纤维为原料,采用磷酸活化法制备活性炭。研究黄麻纤维活性炭对亚甲基蓝和甲基橙2种染料的吸附行为。结果表明,采用磷酸制备的活性炭,由于表面含有羧基和含磷官能团等酸性基团,能够促进活性炭对亚甲基蓝的吸附;黄麻纤维活性炭对2种染料的平衡吸附量、初始吸附速率均随着初始浓度的增加而升高;相同条件下,黄麻纤维活性炭对亚甲基蓝的平衡吸附量大于甲基橙;黄麻纤维活性炭对两种染料的吸附行为更符合准二级动力学模型。     

Adsorption of elemental mercury vapors from synthetic exhaust combustion gas onto HGR carbon

An activated carbon commercially available named HGR, produced by Calgon-Carbon Group, was used to adsorbe metallic mercury. The work is part of a wider research activity by the same group focused on the removal of metallic and divalent mercury from combustion flue gas. With respect to previously published papers, this one is aimed at studying in depth thermodynamic equilibria of metallic mercury adsorption onto a commercial activated carbon. The innovativeness lies in the wider operative conditions explored (temperature and mercury concentrations) and in the evaluation of kinetic and thermodynamic data for a commercially available adsorbing material. In detail, experimental runs were carried out on a laboratory-scale plant, in which Hg° vapors were supplied in a nitrogen gas stream at different temperature and mercury concentration. The gas phase was flowed through a fixed bed of adsorbent material. Adsorbate loading curves for different Hg° concentrations together with adsorption isotherms were achieved as a function of temperature (120, 150, 200°C) and Hg° concentrations (1.0?7.0 mg/m³). Experimental runs demonstrated satisfying results of the adsorption process, while Langmuir parameters were evaluated with gas–solid equilibrium data. Especially, they confirmed that adsorption capacity is a favored process in case of lower temperature and they showed that the adsorption heat was –20 kJ/mol. Furthermore, a numerical integration of differential equations that model the adsorption process was proposed. Scanning electron microscopy (SEM) investigation was an useful tool to investigate about fresh and saturated carbon areas. The comparison between them allowed identification of surface sites where mercury is adsorbed; these spots correspond to carbon areas where sulfur concentration is greater.

Implications: Mercury compounds can cause severe harm to human health and to the ecosystem. There are a lot of sources that emit mercury species to the atmosphere; the main ones are exhaust gases from coal combustion and municipal solid waste incineration. Furthermore, certain CO₂ capture processes, particularly oxyfuel combustion in a pulverized fuel coal-fired power station, produce a raw CO₂ product containing several contaminants, mainly water vapor, oxygen, and nitrogen but also mercury, that have to be almost completely removed; otherwise these would represent a strong drawback to the success of the process.     

Adsorption capacity of powdered activated carbon for 3,5-dichlorophenol in activated sludge

The objectives of this study were to evaluate the performance of powdered activated carbon treatment (PACT) process based on the adsorption capacity of powdered activated carbon (PAC) in activated sludge and the effect of dissolved organic substances in activated sludge on the adsorption capacity of PAC. The DCP adsorption capacity of three PACs originated from different raw materials (coal, soft coal and sawdust) in activated sludge were 29%, 34% and 17% of that of new PAC, respectively. The performance of PACT process for shock loading of 3,5-dichlorophenol (3,5-DCP) was different among PACs in spite of the same adsorption capacity in new PAC. The performance of PACT process for removal of DCP is dependent not on the adsorption capacity of new PAC but on the adsorption capacity of PAC in the aeration tank. Dissolved organic matter (DOM) with molecular weight smaller than 50kDa did not affect the adsorption capacity of PAC for 3,5-DCP in the activated sludge reactor. DOM with molecular weight larger than 50kDa and biofilm developed on the surface of PAC seemed to be responsible for the decreased adsorption capacity of PAC for the DCP.     

活性炭吸附有机蒸气过程中的初始浓度测定

以PTA生产尾气为实验体系，讨论了在活性炭对有机气体动态吸附过程中，有机气体初始浓度的三种测定方法，即气相色谱法、吸附称量法和气体方程计算法。结果得出，吸附称量法误差最小，其次是气体方程计算法，误差最大的是气相色谱法。     

活性炭吸附处理电镀废水中的EDTA

采用颗粒活性炭对模拟废水中EDTA进行批式吸附实验,在实验中考察了恒温振荡器的振荡速度、温度、pH值等因素对吸附的影响,同时探讨了吸附等温线模型和吸附动力学模型。实验结果表明,在25％时活性炭对EDTA的吸附平衡时间为40h。在pH值为5．0、温度为25℃、振荡器振荡速度为200r／min、活性炭粒径为1～2mm、活性炭加入量为10g／L的情况下,EDTA的浓度在48h内由368．8mg／L降低至76．34mg／L,对应的COD值从305．9mg／L降低为67．21mg／L,去除率达到了79．3％。活性炭对EDTA的吸附符合Langmuir吸附等温线模型,其吸附行为可以用准二级吸附动力学模型来描述。     

Adsorption and catalytic decomposition of methyl bromide and methyl iodide on activated carbons

Methyl bromide (MeBr) is commonly used for fumigating structures and commodities. Emission of MeBr during such treatments is environmentally detrimental because of the reaction of MeBr with stratospheric ozone. In this study we evaluated adsorption of MeBr and methyl iodide (MeI) – a potential MeBr replacement, on five commercial activated carbons, and studied water-initiated catalytic decomposition of adsorbed fumigants. All carbon samples showed great adsorption affinity to MeBr and MeI, with the adsorption capacity for MeI several times greater than that for MeBr on the same carbon. For the same fumigant, adsorption was affected by the type of carbon and the concentration of fumigant. Water initiated decomposition of both fumigants, liberating Br⁻ or I⁻ as a transformation product. The rate of decomposition increased with increasing temperature, and was also influenced by the carbon type. The half-life of MeBr or MeI on Centaur, a catalytically modified carbon, was <2 h at 80°C. The rapid decomposition of MeBr and MeI on wet carbons at elevated temperatures may be used to detoxify these fumigants after adsorption on activated carbons.     

椰壳活性炭吸附消除VOCs

对一种椰壳活性炭对甲基丙烯酸甲酯的吸附消除行为进行了研究,重点考察了甲基丙烯酸甲酯的浓度、流速和吸附温度等条件以及水汽存在时对活性炭吸附行为的影响。结果表明,该颗粒活性炭对甲基丙烯酸甲酯有良好的吸附效果,甲基丙烯酸甲酯进口浓度和进气量的改变均会影响吸附饱和时间,导致其增加或减少。通过变温吸附实验确定降低环境温度对其吸附有促进作用。湿度为50%时吸附量相对干气饱和吸附量影响较小,说明该活性炭抗水汽能力较好。经多次重复再生实验,其饱和吸附量未见明显下降。     

3种污泥对磺胺二甲基嘧啶的吸附性能

研究了厌氧颗粒污泥、厌氧污泥及好氧污泥对磺胺二甲基嘧啶(SM2)的吸附性能。当SM2初始浓度为50μg/L时,采用活性污泥灭活吸附,考察了吸附平衡时间、吸附等温线及温度对污泥吸附的影响,并比较了失活污泥与活性污泥的吸附性能。结果表明,3种污泥对SM2的吸附均在1 h内达到吸附平衡;3种失活污泥对SM2的吸附都可用Freundl-ich和Langmuir吸附模型来描述,并且Freundlich吸附模型的拟合效果要好于Langmuir模型(R2F>R2L);温度对3种污泥吸附影响规律一致,并且吸附常数KF(15℃)>KF(25℃)>KF(35℃),这说明吸附为放热反应,低温有利于吸附反应的进行。活性污泥对SM2的吸附与失活污泥吸附规律一致,都符合Freundlich模型。3种活性污泥对SM2的去除是吸附和降解的共同作用,并且都是降解占主导地位,降解效率为厌氧污泥>好氧污泥>厌氧颗粒污泥。     

Selection and Substantiation of an Organic Solvent Removal Apparatus at a Print Shop by Comparative Experiments Using the Activated Carbon Adsorption and Catalytic Oxidation Methods

ABSTRACT

The investigation of an appropriate organic solvent removal apparatus for installation in a newly reconstructed print shop as a countermeasure for preventing the exhaust of organic solvents was conducted.

The selection of an organic solvent removal apparatus was made after bench-scale tests of the activated carbon adsorption method and the catalytic oxidation method, both of which are effective for the removal of organic solvents, were performed on the actual exhaust gas at the print shop. The results showed that both methods were efficient enough to be applied to the removal of organic solvents, but the activated carbon adsorption method had many drawbacks, such as the need for frequent replacement of activated carbon and complex maintenance. For the catalytic oxidation method, running costs are high, but there are many merits, such as that the catalysts do not have to be replaced as often and maintenance is simple. After considering these factors, a catalytic oxidation removal apparatus was installed at the new print shop. In the results of the substantiation test on the actual apparatus using mixed catalysts of platinum and manganese plus copper, the removal efficiency was 97.998.7% and the concentration of the outlet exhaust gas was about 10 ppm (the average concentration of the inlet exhaust gas was 528 ppm) at a space velocity of 30,000 hr^-1 and a reaction temperature of 200 °C. The results of this study were substantiated.     

Dynamic NO adsorption characteristics of iron-treated activated carbon fibers

The breakthrough curve for NO adsorption on the activated carbon fibers treated in iron salt solutions was determined. They can adsorb much more NO than granular activated carbon by a factor of more than 10 from a flowing 300 ppm NO-N₂ mixed gas at 100°C and 20 ml min⁻¹; the most effective one of the iron-treated carbon fibers of 0.2 g is able to reduce the NO concentration from 300 ppm to 30 ppm. These adsorbents can adsorb the same amount of NO from even a 300 ppm NO-500 ppm SO₂-10% CO₂-10% H₂O-1% O₂-N₂ mixed gas.