The Inhibition of Photochemical Smog I. Inhibition by Phenol,Benzaldehyde, and Aniline

In urban atmospheres hydrocarbons promote the conversion of NO to NO₂ under the influence of sunlight, ultimately giving rise to photochemical smog. The conversion results from a long chain process with HO radicals as the chain carrier. If this chain could be interrupted by suitable radical traps, the formation of photochemical smog would be inhibited. In this paper we report the results of studies using phenol, benzaldehyde, and aniline as inhibitors. Mixtures containing 16 mTorr C₃H₆, 8 mTorr NO, ～85 Torr 0₂, and the addi tives were irradiated at 25°C. The NO₂ pressure was monitored photometrically. In the absence of additive, the NO2 pressure first increases with irradiation time reaching a maximum conversion corresponding to 70% of the NO at 1 2 minutes. As the radiation time is lengthened, the NO₂ pressure drops. With the additive present, the formation of NO₂ is delayed. The time to reach the maximum percent conversion of NO to N0₂ becomes 20, 22, 31, and 40 minutes respectively, for 13 mTorr C₆H₅OH, 2 mTorr C₆H₅CHO, 8 mTorr C₆H₅CHO, and 4.1 mTorr C₆H₅NH₂ added. The problems and possibilities of adding inhibitors to the atmosphere to control air pollution are discussed.     

Benzene and toluene influence with or without nitrogen dioxide on inorganic pigments of works of art—Part II

Air pollution has a great impact on the social and economic aspects all over the world. In order to account the human interaction with the atmospheric environment, a suitable scientific basis is needed.That is why six physicochemical quantities have been determined in a previous work for each one heterogeneous system between organic volatile pollutants and oxide-pigments of works of art. This investigation is extended in order to determine experimentally five new ones. Thus, a more precise contribution to the elucidation of the mechanism of the deterioration of various works of art in museums is achieved. These physicochemical quantities are: (1) local adsorption energies, (2) local monolayer capacities, (3) local adsorption isotherms, (4) density probability function, and (5) pollutant concentration on the oxide-pigment at equilibrium. All these adsorption parameters mentioned above have been calculated as a function of experimental time for the systems: C₆H₆/TiO_2, C₆H₆/NO₂/TiO_2, C₆H₆/Cr₂O_3, C₆H₆/NO₂/Cr₂O_3, C₆H₅CH₃/TiO_2, C₆H₅CH₃/NO₂/TiO_2, C₆H₅CH₃/Cr₂O_3, C₆H₅CH₃/NO₂/Cr₂O_3, C₆H₆/PbO, C₆H₆/NO₂/PbO, C₆H₅CH₃/PbO, and C₆H₅CH₃/NO₂/PbO for the first time. Thus, in this work we shall stress the recent new aspect of Reversed Flow-(Inverse) Gas Chromatography (RF-GC or RF-IGC), i.e. the time-resolved chromatography related to the evaluation of some important adsorption parameters. Gas Chromatography is a promising meeting place of surface science and atmospheric chemistry.     

Potential interferences in photolytic nitrogen dioxide converters for ambient air monitoring: Evaluation of a prototype

ABSTRACT

Mixing ratios of the criteria air contaminant nitrogen dioxide (NO₂) are commonly quantified by reduction to nitric oxide (NO) using a photolytic converter followed by NO-O₃ chemiluminescence (CL). In this work, the performance of a photolytic NO₂ converter prototype originally designed for continuous emission monitoring and emitting light at 395 nm was evaluated. Mixing ratios of NO₂ and NO_x (= NO + NO₂) entering and exiting the converter were monitored by blue diode laser cavity ring-down spectroscopy (CRDS). The NO₂ photolysis frequency was determined by measuring the rate of conversion to NO as a function of converter residence time and found to be 4.2 s^?1. A maximum 96% conversion of NO₂ to NO over a large dynamic range was achieved at a residence time of (1.5 ± 0.3) s, independent of relative humidity. Interferences from odd nitrogen (NO_y) species such as peroxyacyl nitrates (PAN; RC(O)O₂NO₂), alkyl nitrates (AN; RONO₂), nitrous acid (HONO), and nitric acid (HNO₃) were evaluated by operating the prototype converter outside its optimum operating range (i.e., at higher pressure and longer residence time) for easier quantification of interferences. Four mechanisms that generate artifacts and interferences were identified as follows: direct photolysis, foremost of HONO at a rate constant of 6% that of NO₂; thermal decomposition, primarily of PAN; surface promoted photochemistry; and secondary chemistry in the connecting tubing. These interferences are likely present to a certain degree in all photolytic converters currently in use but are rarely evaluated or reported. Recommendations for improved performance of photolytic converters include operating at lower cell pressure and higher flow rates, thermal management that ideally results in a match of photolysis cell temperature with ambient conditions, and minimization of connecting tubing length. When properly implemented, these interferences can be made negligibly small when measuring NO₂ in ambient air.

Implications: A new near-UV photolytic converter for measurement of the criteria pollutant nitrogen dioxide (NO₂) in ambient air by CL was characterized. Four mechanisms that generate interferences were identified and investigated experimentally: direct photolysis of HONO which occurred at a rate constant 6% that of NO₂, thermal decomposition of PAN and N₂O₅, surface promoted chemistry involving HNO₃, and secondary chemistry involving NO in the tubing connecting the converter and CL analyzer. These interferences are predicted to occur in all NO₂ P-CL systems but can be avoided by appropriate thermal management and operating at high flow rates.     

Absorption of NO and NO2 in Caprolactam Tetrabutyl Ammonium Halide Ionic Liquids

ABSTRACT

To explore environmentally benign solvents for the absorption of NO and NO₂, a series of caprolactam tetrabutyl ammonium halide ionic liquids were synthesized. The solubility of NO and NO₂ was measured at temperatures ranging from 298.2 to 363.2 K and atmospheric pressure, and the following trend in the solubility of NO and NO₂ in ionic liquids with various halide anions was observed, respectively: F > Br > Cl and Br > Cl > F. Moreover, as the temperature increased from 308.15 to 363.15 K and the mole ratio of caprolactam increased from 2:1 to 6:1, the solubility of NO increased. Alternatively, the solubility of NO₂ decreased as the temperature increased from 298.15 to 363.15 K, and the mole ratio of caprolactam increased from 2:1 to 6:1. The absorption and desorption of NO and NO₂ was practically reversible in the ionic liquids, which was characterized by nuclear magnetic resonance. The method, which is at least partially reversible, offers interesting possibilities for the removal of NO and NO₂.

IMPLICATIONS Basic ionic liquids with amino groups were synthesized and used to capture CO₂, SO₂, and H₂S, and to promote hydrogenation of CO₂. In this paper, the authors used caprolactam tetrabutyl ammonium halide ionic liquid (IL) as absorbing medium in which NO_x could be absorbed. NO_x desorbed from the absorbent could be efficiently reduced by right catalysts at high temperature. The absorbed NO and NO₂ gas could be desorbed at higher temperature, allowing the ionic liquids to be reused several times without loss of capability. It was believed that caprolactam tetrabutyl ammonium bromide (CPL-TBAB) ILs may be useful for NO_x removal reagent for pollution control.     

Conversion of nitrogen oxides on commercial photocatalytic dispersion paints

In the present study, photocatalytic reactions of nitrogen oxides (NO_x = NO + NO₂) were studied on commercial TiO₂ doped facade paints in a flow tube photoreactor under simulated atmospheric conditions. Fast photocatalytic conversion of NO and NO₂ was observed only for the photocatalytic paints and not for non-catalytic reference paints. Nitrous acid (HONO) was formed in the dark on all paints studied, however, it efficiently decomposes under irradiation only on the photocatalytic samples. Thus, it is concluded that photocatalytic paint surfaces do not represent a daytime source of HONO, in contrast to other recent studies on pure TiO₂ surfaces. As main final product, the formation of adsorbed nitric acid/nitrate anion (HNO₃/NO₃^?) was observed with near to unity yield. In addition, traces of H₂O₂ were observed in the gas phase only in the presence of O₂. Formation of the greenhouse gas nitrous oxide (N₂O) could be excluded. The uptake kinetics of NO, NO₂ and HONO was very fast under atmospheric conditions (e.g. γ(NO + TiO₂) > 10^?5). Thus, the uptake on urban surfaces (painted houses, etc.) will be limited by transport. For a hypothetically painted street canyon, an average reduction of nitrogen oxide levels of ca. 5% is estimated. Since the harmful HNO₃/NO₃^? is formed on the surface of the photoactive paints, whereas it is formed in the gas phase in the atmosphere, the use of photocatalytic paints may also help to reduce acid deposition, e.g. on plants, or nitric acid related health issues.     

Reducing Interference Effects in the Chemiluminescent Measurement of Nitric Oxides from Combustion Systems

Experiments were carried out to determine the relative chemiluminescence quenching efficiencies as a function of third body concentration for each of the common combustion products, H₂O, CO₂, CO, H₂, O₂ and Ar. These results are compared with those of other investigators. The effect of reaction chamber pressure on analyzer response and the development of an analyzer design which incorporates an adjustable sample capillary inlet capable of maintaining a constant molar flow rate of sample gas to the reaction chamber are discussed. The effect of carbon monoxide interference on chemiluminescent NO_x measurement has been isolated and found to be significant. A means of correcting NO, measurements for these CO interference effects is described. Quantification of NO and NO₂ absorption in liquid water in NO_x sampling systems has been made. Recommendations for sample system designs to handle the presence of water in the sample gas are made.     

三效催化转化器催化剂硫中毒机理

在一种详细的表面反应机理中加入了包含贵金属催化剂与助催化剂的硫中毒基元反应,建立了新的三效催化转化器催化反应机理。利用该机理进行了稳态工况数值模拟,得到了各排气污染物起燃温度与转化效率随尾气中SO2浓度的变化情况。采用灰色关联分析了SO2浓度与各排气组分转化效率的关联度,结果表明,SO2浓度对C3H6与NOx转化效率影响最大。对三效催化转化器的催化剂活性设计具有重要的参考价值,并对其工况设计及优化提供了指导。     

Chemical Transformations of Nitrogen Oxides While Sampling Combustion Products

The present study reviews the sampling environments and chemical transformations of nitrogen oxides that may occur within probes and sample lines while sampling combustion products. Experimental data are presented for NO_x transformations in silica and 316 stainless steel tubing when sampling simulated combustion products in the presence of oxygen, carbon monoxide, and hydrogen. A temperature range of 25° to 400°C is explored. In the absence of CO and H₂, 316 stainless steel is observed to promote the reduction of nitrogen dioxide to nitric oxide at temperatures in excess of 300°C, and silica is found to be passive to chemical transformation. In the presence of CO, reduction of N0₂ to NO is observed in 316 stainless steel at temperatures in excess of 100°C, and reduction of NO₂ to NO in silica is observed at 400°C. In the presence of H₂, NO₂ is reduced to NO in 316 stainless steel at 200°C and NO_x is removed at temperatures exceeding 200°C. In silica, the presence of H₂ promotes the reduction of NO₂ to NO at 300°C and the removal of NO_x above 300°C.     

Do aerosols act as catalysts in the OH radical initiated atmospheric oxidation of volatile organic compounds?

Smog chamber/FTIR techniques were used to study the relative reactivity of OH radicals with methanol, ethanol, phenol, C₂H₄, C₂H₂, and p-xylene in 750 Torr of air diluent at 296±2 K. Experiments were performed with, and without, 500–8000 μg m⁻³ (4000–50 000 μm² cm⁻³ surface area per volume) of NaCl, (NH₄)₂SO₄ or NH₄NO₃ aerosol. In contrast to the recent findings of Oh and Andino (Atmospheric Environment 34 (2000) 2901, 36 (2002) 149; International Journal of Chemical Kinetics 33 (2001) 422) there was no discernable effect of aerosol on the rate of loss of the organic compounds via reaction with OH radicals. Gas kinetic theory arguments cast doubt upon the findings of Oh and Andino. The available data suggest that the answer to the title question is “No”. As part of this work the rate constants for reactions of OH radicals with methanol, ethanol, and phenol in 750 Torr of air at 296 K were determined to be: k_OH+CH3OH=(8.12±0.54)×10⁻¹³, k_OH+C2H5OH=(3.47±0.32)×10⁻¹² and k_OH+phenol=(3.27±0.31)×10⁻¹¹ cm³ molecule⁻¹ s⁻¹.     

The Effect of Water Vapor on Ozone Synthesis in the Photo-oxidation of Alpha-pinene

A study of the effect of water vapor on the photochemical system NO₂ + alphapinene + hv was conducted. A Hotpack Environmental Room was used as a constant temperature chamber, a bank of ultraviolet and fluorescent lamps as a source of simulated solar radiation, and a 150-liter FEP Teflon bag as a reaction vessel. Representative concentrations of 10 pphm NO₂ and 50 pphm alphapinene were used in a 3 × 2 × 2 factorial design where absolute humidities of 0.0000, 0.0090, 0.01 80 g H₂O/g dry air were varied.

Matheson zero air was passed through a clean air train and used as the diluent. Nitrogen dioxide was added to the reaction mixture by a permeation tube, and water and alpha-pinene by evaporation techniques.

Variables measured as a function of time over a 2-hour irradiation period were total oxidants (Mast Ozone Meter), condensation nuclei (General Electric Small Particle Detector), ozone (Regener Chemiluminescent Ozone Meter), nitrogen dioxide and nitric oxide (Technicon Autoanalyzer), and alpha-pinene (Perkin- Elmer Model 800 gas chromatograph).

Upon irradiation, systems containing nitrogen dioxide and alpha-pinene formed oxidants, ozone, condensation nuclei, and nitric oxide. Based on the differences between simultaneous oxidant and ozone measurements, the formation of peroxide- like compounds may be inferred. During the course of the irradiation, nitrogen dioxide and alpha-pinene were consumed. The concentration-time profiles of all variables were characteristic of those exhibited by typical photochemical smog systems.

An effect of water vapor on the systems studied was demonstrated. Increasing humidity decreased net mean/time oxidant and ozone production and net maximum condensation nuclei production. These effects were significant at a 0.05 confidence level. Effects of water on average mean/time NO₂, NO, and alphapinene concentrations were insignificant at this level. The oxidant to ozone ratio was found to decrease with increasing humidity.

The significant decreases in net oxidant and ozone production and NO₂ consumption with increasing water vapor concentration in systems of nitrogen dioxide alone, suggests that water manifests an effect on pertinent inorganic reactions, and the data also suggest additional water participation in the organic reactions.     

SynGas Production from Organic Waste Using Non-Thermal-Pulsed Discharge

Abstract

The purpose of this study was to develop a technology that can convert biogas to synthesis gas (SynGas), a low-emission substituted energy, using a non-thermal-pulsed plasma method. To investigate the characteristics of Syn-Gas production from simulated biogas, the reforming characteristics in relation to variations in pulse frequency, biogas component ratio (C₃H₈/CO₂), vapor flow ratio (H₂O/total flow rate [TFR]), biogas velocity, and pulse power were studied. A maximum conversion rate of 49.1% was achieved for the biogas when the above parameters were 500 Hz, 1.5, 0.52, 0.32 m/sec, and 657 W, respectively. Under the above conditions, the dry basis mole fractions of the SynGas were as follows: H₂ = 0.645,CH₄ = 0.081, C₂H₂ = 0.067, C₃H₆ = 0.049, CO = 0.008 and C₂H₄ = 0.004. The ratio of hydrogen to the other intermediates in the SynGas (H₂/ITMs) was 3.1.     

The air pollution caused by the burning of fireworks during the lantern festival in Beijing

The effects of the burning of fireworks on air quality in Beijing was firstly assessed from the ambient concentrations of various air pollutants (SO₂, NO₂, PM_2.5, PM₁₀ and chemical components in the particles) during the lantern festival in 2006. Eighteen ions, 20 elements, and black carbon were measured in PM_2.5 and PM₁₀, and the levels of organic carbon could be well estimated from the concentrations of dicarboxylic acids. Primary components of Ba, K, Sr, Cl⁻, Pb, Mg and secondary components of C₅H₆O₄²⁻, C₃H₂O₄²⁻, C₂O₄²⁻, C₄H₄O₄²⁻, SO₄²⁻, NO₃⁻ were over five times higher in the lantern days than in the normal days. The firework particles were acidic and of inorganic matter mostly with less amounts of secondary components. Primary aerosols from the burning of fireworks were mainly in the fine mode, while secondary formation of acidic anions mainly took place on the coarse particles. Nitrate was mainly formed through homogeneous gas-phase reactions of NO₂, while sulfate was largely from heterogeneous catalytic transformations of SO₂. Fe could catalyze the formation of nitrate through the reaction of α-Fe₂O₃ with HNO₃, while in the formation of sulfate, Fe is not only the catalyst, but also the oxidant. A simple method using the concentration of potassium and a modified method using the ratio of Mg/Al have been developed to quantify the source contribution of fireworks. It was found that over 90% of the total mineral aerosol and 98% of Pb, 43% of total carbon, 28% of Zn, 8% of NO₃⁻, and 3% of SO₄²⁻ in PM_2.5 were from the emissions of fireworks on the lantern night.     

Modeling and monitoring of CO,NO and NO2 in a modern townhouse

Mass-balance models for indoor concentrations of CO, NO and NO₂ were applied to an energy-efficient townhouse. Model parameters included source emission rates, infiltrating airflows, and, for NO₂, loss rate coefficients. Emission factors for CO, NO and NO₂ were estimated for each of the gas-fired appliances in the house. Airflows were estimated using sulfur hexafluoride (SF₆) decay techniques. Loss rates for NO₂ were calculated as the difference between NO₂ removal rates and estimated air exchange rates; CO and NO concentrations decayed at a rate not significantly different than that for SF₆. Comparing model predictions with measured concentrations yielded differences averaging 17% for CO and NO, and 28% for NO₂.     

Formation of hydrogen peroxide in the ozonolysis of isoprene and simple alkenes under humid conditions

The ozonolysis of isobutene and isoprene was performed in a 570 ℓ static reactor at 295 K and 730 Torr synthetic air in the presence and absence of water vapour, with the reactant concentration ranges of 1–6 ppmv. Products were analysed by a combination of FTIR spectroscopy, GC-FID, and HPLC. For both alkenes, the yields of H₂O₂ and the primary carbonyl products (acetone for isobutene, methacrolein and methylvinyl ketone for isoprene) increased under humid conditions. In the isoprene ozonolysis, the H₂O₂ yields relative to the O₃ conversion were, as determined from the initial rate of the formation, 1 and 9% for dry and humid conditions, respectively. The increase in its yield under the humid conditions was correlated with the sum of the increase in the yields of methacrolein and methylvinyl ketone (∼13%). This was explained by rapid decomposition of the transient α-hydroxy hydroperoxides formed in the reaction of H₂O with the two stabilised C₄ Criegee intermediates. Atmospheric relevance of the results is discussed.     

Development of a Method for the Analysis of NO2 and NH3 by NO-Measuring Instruments

Adaptation of available instruments to the analysis of NO₂ and NH₃ became important with the introduction of the Federal Constant Volume Sampling procedure for exhaust analysis in 1970. Two instruments, the NO optical detector (NOOD) and the non-dispersive infrared analyzer (ND1R), are both fast and accurate. The use of a system of two converters in conjunction with either of these instruments permits the analysis of a gas stream for NO, NO₂, and NH₃. NO is measured on the gas stream before conversion; NO₂ is determined after the gas stream has passed over a C-Mo converter at 475°C; and NH₃ is determined after the gas has been conducted over a C-Cu converter.     

Simultaneous Sulfur Dioxide and Nitrogen Dioxide Removal by Calcium Hydroxide and Calcium Silicate Solids

ABSTRACT

At conditions typical of a bag filter exposed to a coal-fired flue gas that has been adiabatically cooled with water, calcium hydroxide and calcium silicate solids were exposed to a dilute, humidified gas stream of nitrogen dioxide (NO₂) and sulfur dioxide (SO₂) in a packed-bed reactor. A prior study found that NO₂ reacted readily with surface water of alkaline and non-alkaline solids to produce nitrate, nitrite, and nitric oxide (NO). With SO₂ present in the gas stream, NO₂ also reacted with S(IV), a product of SO₂ removal, on the exterior of an alkaline solid. The oxidation of S(IV) to S(VI) by oxygen reduced the availability of S(IV) and lowered removal of NO₂. Subsequent acidification of the sorbent by the removal of NO₂ and SO₂ facilitated the production of NO. However, the conversion of nitrous acid to sulfur-nitrogen compounds reduced NO production and enhanced SO₂ removal. A reactor model based on empirical and semi-empirical rate expressions predicted rates of SO₂ removal, NO₂ removal, and NO production by calcium silicate solids. Rate expressions from the reactor model were inserted into a second program, which predicted the removal of SO₂ and NO_x by a continuous process, such as the collection of alkaline solids in a baghouse. The continuous process model, depending upon inlet conditions, predicted 30-40% removal for NO and 50-90% removal for SO₂. These x 2 results are relevant to dry scrubbing technology for combined SO₂ and NO_x removal that first oxidizes NO to NO₂ by the addition of methanol into the flue duct.     

Ambient and Source SO2 Detector Based on a Fluorescence Method

The principle of this detector is based on the measurement of the intensity of the ultraviolet fluorescence of SO₂ produced by absorption of the Zn 2138 Å or Cd 2288 Å line. The fluorescence intensity was found to be linear from 0.1 to 500 ppm of SO₂ in air with the Zn lamp and from 0.1 to 1600 ppm with the Cd lamp. The detection limit at present is about 20 ppb. There is no detectable interference from O₃, H₂S, NO₂, CO₂, CO, or H₂, although the presence of a large concentration of CS₂ (500 times as much as SO₂) NO (500 times) or C₂H₄ (4000 times) interferes with the measurement. The presence of 2% H₂0 reduces the signal by 25%, while up to 1 % CH₄ has almost no effect.     

Analysis of NO,NO2, O3 and NOx concentrations measured at a green area of Buenos Aires City during wintertime

We analyse the air quality data measured at a green area of Buenos Aires City (Argentina) during 38 days in winter. We study the relationships between ambient concentrations of nitric oxide (NO), nitrogen dioxide (NO₂), ozone (O₃) and nitrogen oxides (NO_x=NO+NO₂). The variation of the level of oxidant (OX=O₃+NO₂) with the NO_x is obtained. It can be seen that the level of OX at a given location is made up of two contributions: one independent and another dependent on the NO_x concentration. The first one can be considered as a regional contribution, equivalent to the background O₃ concentration and the second one as a local contribution that depends on the level of primary pollution. Local oxidant sources may include direct NO₂ emissions, the reaction of NO with O₂ at high-NO_x levels, and the emission of species that promote the conversion of NO to NO₂. The final category of emissions may include the nitrous acid (HONO) that is emitted directly in vehicle exhaust. Finally, we present a diurnal variation of the local as well as regional contributions and the dependence of the last one on wind direction.     

Humidity effects on photochemical aerosol formation in the SO2-NO-C3H6-air system

In order to investigate the effects of humidity on the gas-phase oxidation of SO₂ in polluted air and on the subsequent aerosol formation process, photoirradiation experiments were carried out by means of a 4-m³ chamber, in which mixtures containing SO₂, NO and C₃H₆ with concentrations in the ppm range were exposed to simulated solar radiation in different relative humidity (r.h.) conditions. The total amount of oxidized SO₂ was quantified from the SO₄²⁻ yield determined by the chemical analysis of the aerosol product, and a part due to the oxidation by the OH radical was evaluated by estimating the OH concentration from the decay rate of C₃H₆. The remaining part was assigned to the oxidation by the Criegee intermediate, as it had a good correlation with the progress of the O₃ + C₃H₆ reaction. The contributions of the two oxidizing species to the total conversion and the oxidation rate of SO₂ were measured as functions of r.h. As a result, experimental evidence was obtained for the prediction of Calvert and Stockwell's (1983, Envir. Sci. Technol. 17, 428A–443A) simulation that the oxidation due to the Criegee intermediate was retarded by the increase in humidity. The OH contribution, on the other hand, was almost independent of r.h. It was observed consequently that the total oxidized amount of SO₂ considerably decreased as r.h. was higher.The humidity effect on the aerosol formation process was found to be more complicated than the effect on the gas-phase chemistry. The maximum rate of increase in the particle number concentration rose linearly with increasing r.h., but the number concentration itself measured at its maximum or at the end of the irradiation reached a ceiling value around r.h. = 30% and went down for higher r.h. The average panicle size in the final stage of the reaction showed a minimum around the same r.h. at which the number concentration was maximum. The H₂SO₄ concentration in the mist particles, however, decreased monotonically as r.h. got higher. It was suggested that these different responses against the increase in humidity resulted from the cooperation of several processes such as the H₂SO₄ monomer formation, the H₂O condensation, the particle coagulation, etc., which had different dependences on r.h.     

Uptake of nitrous acid and nitrogen oxides by nylon surfaces: Implications for nitric acid measurement

The interference in HNO₃ determination due to HNO₂ and NO_x retention on nylon filters has been evaluated in laboratory and field conditions. Nitrous acid is retained on nylon filters with efficiencies varying from 25% at 12ℓ min⁻¹ to 80% at 2ℓ min⁻¹, yielding NO₂⁻ ion. In ambient sampling performed during photochemical smog episodes, NO₂⁻ is oxidized to NO₃⁻ with conversion factors up to 100%, resulting in a positive bias in HNO₃ determination.NO₂ reacts heterogeneously with H₂O on nylon surfaces according to the reaction 2NO₂ + H₂O → HNO₂ + HNO₃ with a removal constant of about 1 × 10⁻⁴ ms⁻¹ at a H₂O concentration of 20,000 ppm. The resulting nitrite and nitrate are independent of the sampling flow rate, while NO₂ concentration, sampling time and exposed nylon surface area play a directly proportional role. Accordingly, the relative interference of NO₂ with respect to HNO₃ determination is almost negligible for nylon filters, usually run at relatively high flow rates, while it may be significant for nylon denuders, which are characterized by larger exposed surfaces and lower operating flow rates.