Environmental Appraisal-Particulate Matter,Oxides of Sulfur,and Sulfuric Acid

The role of particulate matter and oxides of sulfur in degradation of the atmospheric environment is discussed. The Federal Air Quality Criteria for these pollutants are analyzed for their conformance with the requirement of the Clean Air Act of 1967 that they reflect the latest scientific knowledge pertinent to the indication of their effects on health and welfare. Visibility reduction by suspended particulate matter is treated and the bases for the criteria issued in the documents “Air Quality Criteria for Particulate Matter” and “Air Quality Criteria for Sulfur Oxides” are examined. The reactions between particulate matter and gaseous pollutants are discussed, along with the Impact of particulate matter on modifications of weather processes. Local effects, such as precipitation, are considered. The relationship between pollution by particulate matter and cloud formation is discussed, as are persistence of fog and the observation that certain sources of particulate pollution are also sources of ice nuclei.     

改良型湿法制备活性白土清洁生产及末端治理实验研究

传统湿法制备活性白土工艺中存在水耗、酸耗大等清洁水平较低的问题,本研究提出了在生产工艺流程中循环使用硫酸酸性废液、并从循环3次的硫酸废液中回收铝盐制备无铁硫酸铝的一种改良型湿法制备活性白土工艺,对末端治理采用电石渣替代石灰作为中和剂进行了探索性实验研究。实验结果表明,改良型湿法制备活性白土工艺对活性白土产品的理化性质无明显影响,产品质量符合行业标准,且酸的利用率从20%提高到约90%,水耗减少量为原工艺的1/3,无铁硫酸铝主要参数符合相关产品技术标准(HG/T2225-2001)。用电石渣作为中和剂处理酸性废液能够实现出水水质稳定达标,处理成本从255万元降低至210万元。本研究的实施使得活性白土的生产工艺清洁生产水平有较大提高。     

Lidar-assisted measurement of PM10 emissions from agricultural tilling in California's San Joaquin Valley – Part I: lidar

Vertical profiling with point samplers is an accepted method for quantifying the fluxes of PM₁₀ from non-point fugitive dust sources, but is limited by uncertainty in estimates of the actual height of the dust plume, especially for plumes that exceed the highest sampling height. Agricultural land preparation operations in the San Joaquin Valley were monitored using upwind–downwind vertical PM₁₀ profiles and data collected during the first successful experiment to include light detection and ranging (lidar), in 1998, were analyzed to provide modeling criteria for the 1996 and 1997 data. A series of six comprehensive PM₁₀ tests with concurrent lidar data was examined to: (a) develop a framework for analyzing upwind–downwind point PM₁₀ concentration profiles of land preparation operations (disking, listing, root cutting, and ripping) and (b) identify conditions under which the field sampling strategies affect the reproducibility of PM₁₀ concentration measurements. Lidar data were used to verify that the plume heights and shapes extrapolated from the point sampler vertical profiles adequately described the plumes. The shortcomings of the vertical profiling technique and lidar methods are discussed in the light of developing efficient robust methods for accurate PM₁₀ emissions quantification from complex non-point sources.     

Reduction of nitrogen excretion and emission in poultry: A review for organic poultry

Organic poultry is an alternative to conventional poultry which is rapidly developing as a response to customers' demand for better food and a cleaner environment. Although organic poultry manure can partially be utilized by organic horticultural producers, litter accumulation as well as excessive nitrogen still remains a challenge to maintain environment pureness, animal, and human health. Compared to conventional poultry, diet formulation without nitrogen overloading in organic poultry is even more complicated due to specific standards and regulations which limit the application of some supplements and imposes specific criteria to the ingredients in use. This is especially valid for methionine provision which supplementation as a crystalline form is only temporarily allowed. This review is focused on the utilization of various protein sources in the preparation of a diet composed of 100% organic ingredients which meet the avian physiology need for methionine, while avoiding protein overload. The potential to use unconventional protein sources such as invertebrates and microbial proteins to achieve optimal amino acid provision is also discussed.     

Air Pollution Research Needs: Herbaceous and Ornamental Plants and Agriculturally Generated Pollutants

Effects of various air pollutants on economically important crops and ornamentals have been studied since before the turn of the century.

Summaries of this research on the effects of air pollutants, that have appeared in criteria documents developed by the Environmental Protection Agency, should be reviewed with respect to differences in plant susceptibility found in various regions of the country. These susceptibility differences are associated with variations in both environmental conditions and distribution of pollutants. Research efforts on air pollution injury to vegetation have often been poorly coordinated leaving many gaps in our knowledge. A better assessment of the impact of air pollution on vegetation is required to attain realistic controls for pollutants affecting agriculture. Research areas of major concern include: baseline information on effects of pollutants on agricultural productivity; dose-response information to support predictive mathematical models for acute and chronic studies of growth, yield, and quality effects; effects of pollutants interacting with other pollutants and with insects and plant diseases; mechanisms of pollutant action; genetic changes related to pollutant effects; effects of environmental stresses on plant response to pollutants; evaluation of plants including soil microbes as pollutant sinks; development of techniques to minimize pollutant effects; and, the effects of agricultural chemicals as air pollutants. There is a need for studies that consider the whole plant in its natural environment. Conceptual models interrelating pollutant effects and their interactions and ultimately mathematical models will be needed to develop an intelligent approach to land management. The effects of agriculturally produced pollutants on plants and other receptors must be identified and quantified.     

Thermal Encapsulation of Metals in Superfund Soils

Abstract

Superfund sites frequently contain both heavy metals and organic hazardous waste. If not properly controlled, the metals may be changed to a more leachable form and may also be emitted to the atmosphere via the exhaust stack. This paper documents a batch kiln R&D test program to solve these metal-related problems. It was performed under the U.S. EPA’s SITE (Superfund Innovative Technology Evaluation) Emerging Technology Program. Allis Mineral Systems has developed the Thermal Encapsulation Process. Metals with limits set by EPA’s TCLP (Toxicity Characteristic Leaching Procedure) test and BIF (boiler and industrial furnace) stack emission regulations, such as cadmium, chromium, and lead, are the initial target of this process. This process, while unproven in these areas, may also apply to mixed waste (EPA hazardous waste/low-level radioactive wastes) and may also benefit commercial hazardous waste or Superfund thermal treatment systems. The results of the SITE tests were positive: strong, durable nodules were produced with excellent crush strength and improved resistance to leaching. Feed preparation, particularly control of moisture content, was found to be a key element in initiation of agglomeration. A good correlation was found between decreasing TCLP metals leachate levels and increasing crush strength.     

Bilateral environmental cooperation in 1991?V2001 and its role in the improvement of the ecological situation in Estonia

Estonia has made relatively fast progress in developing its environmental policy and drafting legislation during the last decade. Strategic environmental documents and programmes have been elaborated, and Estonia has successfully started to implement the goals set in these documents. Implementation of agreed environmental policy goals requires significant financial resources as well as know-how, and international cooperation is one of the most important sources of them. Bilateral environmental cooperation with Northern and Central European countries, which is based on international regime-like arrangements and is well institutionalised, has been and still is an important source of know-how as well as financial assistance for the improvement of the state of the environment in Estonia. Experience acquired in this cooperation process has also helped Estonia to pave the way towards successful accession negotiations with the European Union.     

Derivation of site-specific surface water quality criteria for the protection of aquatic ecosystems near a Korean military training facility

This study suggested the first Korean site-specific ecological surface water quality criteria for the protection of ecosystems near an artillery range at a Korean military training facility. Surface water quality (SWQ) criteria in Korea address human health protection but do not encompass ecological criteria such as limits for metals and explosives. The first objective of this study was to derive site-specific SWQ criteria for the protection of aquatic ecosystems in Hantan River, Korea. The second objective was to establish discharge criteria for the artillery range to protect the aquatic ecosystems of Hantan River. In this study, we first identified aquatic organisms living in the Hantan River, including fishes, reptiles, invertebrates, phytoplankton, zooplankton, and amphibians. Second, we collected ecotoxicity data for these aquatic organisms and constructed an ecotoxicity database for Cd, Cu, Zn, TNT, and RDX. This study determined the ecological maximum permissible concentrations for metals and explosives based on the ecotoxicity database and suggested ecological surface water quality criteria for the Hantan River by considering analytical detection limits. Discharge limit criteria for the shooting range were determined based on the ecological surface water quality criteria suggested for Hantan River with further consideration of the dilution of the contaminants discharged into the river.     

Eco-Labelling of Shampoos,Shower Gels and Foam Baths (6 pp)

GOAL, SCOPE AND BACKGROUND: Environmental issues of personal care products have been met with little attention in the past. Monitoring data as well as preliminary environmental risk assessments indicate that some ingredients in personal care products might be relevant pollutants in the environment. Following the precautionary principle, eco-labelling is proposed as an effective tool for source control of one major group of personal care products, shampoos, shower gels and foam baths (SSBs). Eco-labelling is a soft, but effective market driven and product specific approach to lower discharge of environmentally detrimental substances. Products that fulfil the criteria proposed help to minimise the impact of SSBs on the environment. METHODS: Available assessment tools for dangerous substances (e.g. current legislation on environmental risk assessments and classification, and labelling, eco-labelling criteria for similar products, the calculation of the critical dilution volume) were adapted and integrated into the criteria for the eco-labelling of SSBs. RESULTS AND DISCUSSION: A short outline of the eco-labelling criteria developed for SSBs is provided. The basic criteria concern the effects of the substances discharged into the waste water during and after use. Products with an eco-label award may exclusively contain substances for which basic information about their effects on the environment is available. They may not contain persistent, bioaccumulating, toxic or ecotoxicological substances. In addition, the basic criteria include requirements for the container and consumer information. CONCLUSION: The basic criteria for eco-labelling SSBs are based on the actual state of science and are at the same time as simple and transparent as possible to ensure the best applicability. SSBs that comply with the described basic criteria can contribute to a lower chemical burden of waste water treatment plants and surface water. RECOMMENDATION AND OUTLOOK: The proposal for basic criteria described should stimulate discussion on eco-labelling of SSBs. It should help to pass valid criteria supported by authorities, producers and consumer groups for a national or international eco-label, e.g. for the European Flower or the German Blue Angel. In future, the successful introduction of labelled SSBs into the market will raise the awareness of the general public about the environmental effects of personal care products and it will help to promote environmentally compatible products.     

Steps towards a European dioxin emission inventory

The results of a project aiming at collection and evaluation of information regarding the industrial and non-industrial emission sources for dioxins and furans (PCDD/PCDF) in 17 European Countries (EU 15, CH, N) are presented. An overview about national documents covering dioxin emission inventories for the period 1990-1995 is given. Some data on emissions associated with residual materials, waste and waste water are presented additionally. Based on the air emission data contained in these documents the most important emission sources were determined which are assumed to cover about 90% of the overall emissions. For the selected sources and for all 17 countries new estimates of the atmospheric PCDD/PCDF emissions were derived from average emission factors and statistical activity rates for the year 1994. As a result, on the European scale the largest annual PCDD/PCDF emission is assessed to be released from municipal waste incineration, quite closely followed by emissions from iron ore sintering. Considerable releases of dioxins and furans--based, however, on highly uncertain data--are further assessed for domestic burning, accidental fires and (former) use of contaminated wood preservatives (pentachlorophenol). A lower but still significant emission is further assigned to the sector of non-ferrous metal production; particular processes used in this branch proved to generate very high PCDD/PCDF flue gas concentrations.     

Determining ecoregional numeric nutrient criteria by stressor-response models in Yungui ecoregion lakes,China

The importance of developing numeric nutrient criteria has been recognized to protect the designated uses of water bodies from nutrient enrichment that is associated with broadly occurring levels of nitrogen/phosphorus pollution. The identification and estimation of stressor-response models in aquatic ecosystems has been shown to be useful in the determination of nutrient criteria. In this study, three methods based on stressor-response relationships were applied to determine nutrient criteria for Yungui ecoregion lakes with respect to total phosphorus (TP), total nitrogen (TN), and planktonic chlorophyll a (Chl a). Simple linear regression (SLR) models were established to provide an estimate of the relationship between a response variable and a stressor. Multiple linear regressions were used to simultaneously estimate the effect of TP and TN on Chl a. A morphoedaphic index (MEI) was applied to derive nutrient criteria using data from Yungui ecoregion lakes, which were considered as areas with less anthropogenic influences. Nutrient criteria, as determined by these three methods, showed broad agreement for all parameters. The ranges of numeric nutrient criteria for Yungui ecoregion lakes were determined as follows: TP 0.008–0.010 mg/L and TN 0.140–0.178 mg/L. The stressor-response analysis described will be of benefit to support countries in their numeric criteria development programs and to further the goal of reducing nitrogen/phosphorus pollution in China.     

Siting a municipal solid waste disposal facility,Part II: The effects of external criteria on the final decision

The procedure of a multi-criteria decision analysis supported by the geographic information systems was applied to the site selection process of a planning municipal solid waste management practice based on twelve different scenarios. The scenarios included two different decision tree modes and two different weighting models for three different area requirements. The suitability rankings of the suitable sites obtained from the application of the decision procedure for the scenarios were assessed by a factorial experimental design concerning the effect of some external criteria on the final decision of the site selection process. The external criteria used in the factorial experimental design were defined as “Risk perception and approval of stakeholders” and “Visibility”. The effects of the presence of these criteria in the decision trees were evaluated in detail. For a quantitative expression of the differentiations observed in the suitability rankings, the ranking data were subjected to ANOVA test after a normalization process. Then the results of these tests were evaluated by Tukey test to measure the effects of external criteria on the final decision. The results of Tukey tests indicated that the involvement of the external criteria into the decision trees produced statistically meaningful differentiations in the suitability rankings. Since the external criteria could cause considerable external costs during the operation of the disposal facilities, the presence of these criteria in the decision tree in addition to the other criteria related to environmental and legislative requisites could prevent subsequent external costs in the first place.

Implications:

An experimental design was applied to a siting process based on different scenarios. The suitability rankings of suitable sites were obtained for each scenario. The external criteria used in the design were defined as perception and visibility. The presence of the external criteria produced meaningful differentiations. Two widespread persuasions about site selection were disproved using the results.     

Analysis method for PCBs in reclaimed oil using a fast-GC triple stage quadrupole mass spectrometer with the 13-component quantitation method

It is necessary for companies supplying reclaimed oil to analyze polychlorinated biphenyls (PCBs), because there is a possibility of the presence of contaminants due to trace-level PCBs in the reclaimed oil. However, common analysis methods of PCBs are time-consuming and complicated. Fast-GC triple stage quadrupole mass spectrometer with the 13-component quantitation method is an official method for analyzing PCBs in insulating oil in Japan. This method is extremely fast and simplified. The purpose of this study involves an investigation of the aforementioned fast and simple method for potential use in the analysis of reclaimed oil. Furthermore, it was attempted to combine the method with sample preparation involving only hexane dilution. The effect of sample dilutions corresponding to 100, 300, and 500 times was evaluated for reducing the matrix effect. The matrix effect was suppressed at a dilution ratio equal to or exceeding 300 times. Calibration curves of four points, namely 0.01, 0.05, 0.1, and 0.5 ng/mL, (ignored origin) by using an internal standard method were prepared for the 13 components. The square of regression coefficient (R²) values of all calibration curves exceeded 0.997. This method was adopted for the analysis of reclaimed oil containing 0.5 μg/mL PCBs, which corresponds to the judgment criteria, and accurate quantitation (accuracy value, 94.0–102%) and good repeatability (%RSD, 3.6%) were obtained. Furthermore, the required sensitivity was maintained even when 800 samples were analyzed without a cleaning ion source and an exchanging analysis column.     

嗅觉实验配气方法的改进及影响因素研究

配制气体样品是异味测试及相关研究的基础工作,配气稳定性直接影响测试结果准确度。三点比较式臭袋法使用微量进样针量取并转移液体标准物质到3L无臭气袋的传统配气方法。对于异味阈值较小物质或样品浓度处于较低范围时,为了降低取样体积波动对配气精度和稳定性的影响。提出先将标准注入100mL玻璃注射器,充分挥发混匀后再转移部分气体到无臭气袋的两步式配气方法。结果表明,2种配气方法的准确度不存在显著差异,但两步式配气法的配气稳定性明显优于传统方法。此外,研究还发现,常见异味物质在被注人气袋后3min内便能完全挥发并混合均匀。除一些挥发性和吸附性极强的物质外,气袋内的异味物质气体浓度能在配好后20min内基本保持不变。     

Whole effluent assessment of industrial wastewater for determination of BAT compliance. Part 2: metal surface treatment industry

Background, aim and scope  

Toxicity testing has become a suitable tool for wastewater evaluation included in several reference documents on best available techniques of the Integrated Pollution Prevention and Control (IPPC) Directive. The IPPC Directive requires that for direct dischargers as well as for indirect dischargers, the same best available techniques should be applied. Within the study, the whole effluent assessment approach of OSPAR has been applied for determining persistent toxicity of indirectly discharged wastewater from the metal surface treatment industry.     

An Air Pollution Incident Due to a Stationary Front

In January 1971, the New York City area experienced a period of high pollution in which concentrations exceeded the present criteria for Stage I of the New York City Alert-Warning System. The incident was unusual because the high concentrations were associated with a weak frontal system which moved back and forth over the area and not with a stagnating anticyclone. Concentrations of pollutants were found to be closely related to the movement of the frontal system as well as to changes in wind speed and stability. Climatological criteria for identifying-periods of potential high air pollution and the criteria for mixing heights, transport wind speed and ventilation factors necessary for the issuance of an official advisory from the National Meteorological Center were not met during this incident. Therefore, some re-evaluation and redefinition of these criteria are recommended.     

Simultaneous determination of pesticides,mycotoxins, tropane alkaloids,growth regulators,and pyrrolizidine alkaloids in oats and whole wheat grains after online clean-up via two-dimensional liquid chromatography tandem mass spectrometry

In this study, a two-dimensional liquid chromatography tandem mass spectrometry method was developed and validated for the determination of pesticide residues and contaminants in whole wheat grains and oats. The samples were extracted with a mixture of acetonitrile and water and were injected into the two-dimensional LC-MS/MS system without any further clean-up or sample preparation. Samples were analyzed with four different matrix matched calibrations. Matrix effects were evaluated by comparing analyte signals in the respective matrix matched standard with the neat solvent standards. The final method was validated according to the current Eurachem validation guide and SANTE document. The number of successfully validated analytes throughout all three validation levels in oats and wheat, respectively, were as follows: 330 and 316 out of 370 pesticides, 6 and 13 out of 18 pyrrolizidine alkaloids and 7 out of 9 regulated mycotoxins. Moreover, both plant growth regulators mepiquat and chlormequat as well as the tropane alkaloids atropine and scopolamine met the validation criteria. The majority of pesticides showed limits of detection below 1?µg kg^?1, pyrrolizidine alkaloids below 0.7?µg kg^?1, tropane alkaloids below 0.2?µg kg^?1, growth regulators below 0.7?µg kg^?1 and mycotoxins below 8?µg kg^?1 in both matrices.     

Design Variables Associated with Fiberglass/Fly Ash Fabric Filter Cleaning

This paper documents the variation in pressure drop and collection efficiency for fiberglass/fly ash fabric filter systems caused by variations in cleaning intensity (reverse air and reverse pulse), air to cloth ratio, and dust loading. Reverse air rates greater than 2 fpm were required to produce stable pressure characteristics. Pulse jet pressure greater than 50 psi reduced collection efficiency. Increased air to cloth ratios produced decreased collection efficiency.     

Investigation of preparation conditions and photocatalytic efficiency of nano ZnO using different polysaccharides

The development of a complete set of extensive studies combining both the preparation factors of catalysts and photocatalytic experimental factors for the photodegradation of methylene blue, crystal violet, and Congo red using effective nano zinc oxide (ZnO) obtained from polysaccharides (chitosans, corn starch, and sodium alginate) as chelating agents was the main objective of this study. The influence of nature of polysaccharides, ratio of reactants, calcination temperatures during preparation process, and effects of photocatalytic experimental conditions on photodegradation was investigated. Corn starch and sodium alginate were found to be effective chelating agents and optimum preparation parameters were set as 3:3 % ratio of reactants and 450 °C calcination temperature to prepare nano ZnO with good photocatalytic activity. The order of organic dyes based on their photodegradation rates was arranged as crystal violet > methylene blue > Congo red. Our findings shed light on the optimization of both preparation conditions of photocatalysts and photocatalytic experimental conditions.