Analysis of atmospheric conditions during air pollution episodes in Ankara, Turkey

This paper presents a detailed analysis of the meteorological conditions that are associated with strong air pollution episodes in Ankara, Turkey. Based on climatological and air quality data [SO2 and TSP (total suspended particulates)] obtained for the winter months during 1989-1994, the analysis showed that the presence of weak atmospheric pressure gradients and warm air advection were the most important factors leading to high SO2 and TSP concentrations. In addition, the onset of the high air pollution episodes was generally associated with a trend toward negative vorticity at the 850-hPa level.     

A case study for wintertime observation of atmospheric particulates by an eye-safe laser radar

Atmospheric particulates were monitored on a typical high concentration day in early winter in Osaka, Japan, using a compact and portable eye-safe laser radar system. The height of mixing layer was about 0.4 km at 8:00 and gradually increased to 0.8 km at 14:00. The development of the layer was in inverse proportion to the decrease of particulates near the ground surface. Analysis of particulates collected with high-volume air samplers showed that concentrations of elemental carbon (EC), lead and ammonium ion near the surface decreased significantly from morning to midday, while concentrations of sulfate, nitrate, sodium and calcium ions were almost constant. The results obtained in the preliminary study suggest that anthropogenic particulates such as EC and lead are on the rise with development of mixing layer from morning to midday.     

Removal of volatile and semivolatile organic contamination from soil by air and steam flushing

A soil core, obtained from a contaminated field site, contaminated with a mixture of volatile and semivolatile organic compounds (VOC and SVOC) was subjected to air and steam flushing. Removal rates of volatile and semivolatile organic compounds were monitored during flushing. Air flushing removed a significant portion of the VOC present in the soil, but a significant decline in removal rate occurred due to decreasing VOC concentrations in the soil gas phase. Application of steam flushing after air flushing produced a significant increase in contaminant removal rate for the first 4 to 5 pore volumes of steam condensate. Subsequently, contaminant concentrations decreased slowly with additional pore volumes of steam flushing. The passage of a steam volume corresponding to 11 pore volumes of steam condensate reduced the total VOC concentration in the soil gas (at 20 degrees C) by a factor of 20 to 0.07 mg/l. The corresponding total SVOC concentration in the condensate declined from 11 to 3 mg/l. Declines in contaminant removal rates during both air and steam flushing indicated rate-limited removal consistent with the persistence of a residual organic phase, rate-limited desorption, or channeling. Pressure gradients were much higher for steam flushing than for air flushing. The magnitude of the pressure gradients encountered during steam flushing for this soil indicates that, in addition to rate-limited contaminant removal, the soil permeability (2.1 x 10(-9) cm2) would be a limiting factor in the effectiveness of steam flushing.     

Identification and Quantitative Analysis of Particulate Air Contaminants by X-Ray Diffraction Spectrometry

Because of the synergistic effects which take place from the mixing of gases and particulates in ambient air, it is important that the determination of air contaminants be carried out on the sample in its native state without imposing any further chemical recombination during the analysis. Since x-ray diffraction provides a chemically passive method of analysis and yields molecular rather than elemental information, we have undertaken the siudy of, and have successfully employed crystal diffraction lines as a qualitative and quantitative means for determining such materials as lime, calcium carbonate, road salt, coke dust, and aerosol from sinter emissions as well as several other less common industrial particulates in samples obtained from dustfall as dispersed in a matrix of powdered amorphous glass. Correlative to the above investigation this method was also extended to the study of such gases as sulfur dioxide which may be selectively fixed to an active surface.     

A field intercomparison and fundamental characterization of various dust samplers with a reference sampler

The European Economic Community Council Directive 80/779/EEC describes air quality limit values and guide values for sulfur dioxide and suspended particulates. However, article 10, paragraph 1 does not define well enough the reference method required, amongst others, for the gravimetric measurement of suspended particulates. It is explicity stated in article 10, paragraph 5 of the directive, that "the commission shall, in selected locations in the member states and in cooperation with the latter, carry out studies on the sampling...of suspended particulates. These studies shall be designed in particular to promote the harmonization of methods of sampling and analysis of these pollutants." Therefore, in a joint research program the Umweltbundesamt (grant #104 02263), the commission of European Communities (grant #84-B-6642-11-017-11-N) and the U.S. EPA (grant #2-432U-3580) funded the development of a reference dust sampler by the Fraunhofer-Institute of Toxicology and Aerosol Research (FhlTA, in Hannover, Federal Republic of Germany) in order: to study the particle size distribution of ambient air aerosol at a number of selected sites; to compare the results obtained with the reference dust sampler with those of particle samplers operated in Europe and the United States; to verify the applicability of wind tunnel results to sampling behaviour in the free atmosphere.     

Determination of atmospheric nitrate particulate size distribution and dry deposition velocity for three distinct areas

In this study, both atmospheric particulates and dry deposited particulates were collected at a highway intersection, coastal location and suburban area in Taichung, Taiwan for the characterization of nitrate containing particulates (NCPs) in size distribution and dynamic properties. Collected particulates were placed in contact with nitron (C20H16N4) to form distinctive products of NCPs, which were examined by a SEM. For total atmospheric particulates, the sum of NCP and non-nitrate containing particulate (NNCP), the average shape factor values are 1.69, 1.49, and 1.36 for the highway intersection, coastal area and suburban area, respectively. The calculated shape factors show no significant differences with sizes. Dry deposition fluxes and atmospheric concentrations at various size ranges were estimated. The mass distributed in fine particle range (相似文献   

Temporal trends of persistent organochlorine residues in human adipose tissue from Japan, 1928-1985

The presence of pesticide residues in rain, throughfall, stemflow and in ambient air in two Italian forests affected by the forest damage phenomenon were investigated. Pesticides measured were: alachlor, atrazine, carbaryl, 2,4-D, diazinon, dichlobenil, fluazifop-butyl, MCPA, parathion, phorate and trifluralin. Rainwater samples were collected from May to October 1988 at Vallombrosa and Renon, air and atmospheric particulates were sampled during April-June 1989, only at Vallombrosa. A total of 146 samples of rainfall and 20 samples of ambient air were analysed and 49 out of 166 samples contained at least one active ingredient. Herbicides were more frequent than insecticides, and their concentrations were also higher (max 3.44 microg litre(-1)).     

Utilization of selected area electron diffraction patterns for characterization of air submicron particulate matter collected by a thermophoretic precipitator

A thermophoretic precipitator (TP) that uses a novelty of direct sampling of ambient air particulate matter (PM) onto transmission electron microscopy (TEM) grids was designed and utilized to determine its potential applicability for the collection and consequent qualitative analyses of representative PM in the air, especially those with aerodynamic diameter less than 1 microm (PM1.0). After a calibration process, preliminary field tests were performed under different weather conditions, locations, and time frames. TEM, selected area electron diffraction (SAED), and electron energy-dispersive X-ray spectrometry (EDS) analyses were performed on individual samples, and chemical species were analyzed. During this investigation, individual air PM with different sizes ranging from 10 microm to 10 nm for TEM analysis was collected. Two observations were made: (1) a large fraction of collected particulates were aggregates of very small particles of both organic and inorganic origin, and (2) a large fraction of the collected particulates were crystalline or polycrystalline. This study has demonstrated, by utilization of SAED patterns from TEM on air particles collected by a TP, the potential to analyze and identify individual air PM in a nanometer regime qualitatively by combining SAED and EDS data.     

宁波市大气可吸入颗粒物PM1o和PM2.5的源解析研究

在宁波市布设4个代表性点位,于2010年春季、夏季和冬季进行大气PM10和PM2.s的采样,同时采集了多种颗粒物源样品,建立了PM10、PM2.5和源样品的化学成分谱.采用化学质量平衡模型(CMB)对宁波市PM10、PM2.5进行源解析.结果表明,城市扬尘、煤烟尘、机动车尾气尘是宁波市PM10、PM2.5的3大污染源,...     

Co-injection of air and steam for the prevention of the downward migration of DNAPLs during steam enhanced extraction: an experimental evaluation of optimum injection ratio predictions

When steam is injected into soil containing a dense volatile non-aqueous phase liquid contaminant, the DNAPL vaporized within the heated soil region condenses and accumulates ahead of the steam condensation front. If enough DNAPL accumulates, gravitational forces can overcome trapping forces allowing the liquid contaminant to flow downward. By injecting air with steam, a portion of the DNAPL vapor remains suspended in equilibrium with the air, decreasing liquid contaminant accumulation ahead of the steam condensation front, and thus reducing the possibility of downward migration. In a previous work, a theoretical model was developed to predict the optimum injection ratio of air to steam that would eliminate accumulation of DNAPL ahead of the temperature front and thus minimize the potential for downward migration. In this work, the theoretical model is summarized, and an experiment is presented in order to evaluate the optimum injection ratio prediction. In the experiment, a two-dimensional water saturated sand pack is contaminated with a known mass of TCE (DNAPL). The system is then remediated by co-injecting air and steam at the predicted optimum injection ratio, calculated based on the average contaminant soil concentration in the sand pack. Results for the co-injection of air and steam are compared to results for the injection of pure steam or pure air. Injection at the predicted optimum injection ratio for a volumetric average NAPL saturation, reduced accumulation of the contaminant ahead of the condensation front by over 90%, as compared to steam injection alone. This indicates that the optimum injection ratio prediction is a valuable tool for limiting the spreading of DNAPL during steam-enhanced extraction. Injection at the optimum injection ratio resulted in earlier recovery of contaminant than for steam injection alone. Co-injection of steam and air is also shown to result in much higher recovery rates than air injection alone.     

灰霾天气与大气颗粒物的相关性研究综述

随着城市化进程的迅速发展,城市大气污染加剧,灰霾天气也随之增多。综述了灰霾天气期间大气颗粒物在时空分布和污染水平2方面的污染特征,分析了大气颗粒物与能见度相关性,介绍了国内外对灰霾天气期间大气污染物的组成及源解析方面的研究进展,并提出了今后灰霾天气的研究方向。     

Sources and fate of PCDD and PCDF

PCDD and PCDF were found in urban air particulates from St. Louis and Washington, D.C., and in sediments from the Great Lakes and Siskiwit Lake, Isle Royale. The similarity between the PCDD and PCDF found in air particulates and sediment samples and the presence of PCDD and PCDF in sediment from Siskiwit Lake (a location which can receive only atmospheric inputs) suggest that these compounds are emitted to the atmosphere from combustion sources. The historical input of PCDD and PCDF to dated sediment cores shows a strong increase since 1940, and this suggests that the incineration of chlorinated organic compounds is an important source of PCDD and PCDF to the environment.     

Ambient Air Particulates Bound Mercury Hg(p) Study Among Four Crops (Rice,White Cabbage,Arden Lettuce,and Gynura) at a Characteristic Sampling Site

The main purpose of this study was to monitor ambient air particulates and particulate-bound Hg (Hg[p]) compositions in different crops in the coastal zone in the Taichung, Taiwan, area at a sampling site during 2013 October to 2013 December. In addition, a direct mercury analyzer (DMA-80) was used to directly detect the concentration with measured results by the regression equation of Hg in the ambient air. The results indicated that: 1) the mean values of ambient air Hg(p) compositions in rice displayed no significant differences for weeks one, two, and three versus those of the other crops (white cabbage, Arden lettuce, and Gynura procumbens); 2) for white cabbage, the higher the humidity, the lower the average ambient air Hg(p) compositions that were obtained, a phenomenon that was also reflected on the crops of white cabbage and G. procumbens; 3) Arden lettuce displayed no significant differences in the leaf Hg(p) compositions during weeks one, two, and three; however, the stem portions displayed significant differences in Hg(p) compositions during weeks two and three; and 4) the Spearman statistical method showed the mean differences for ambient air Hg(p) at the Long-jing sampling site (coastal regions) with four different crops (rice, white cabbage, Arden lettuce, and Gynura) in central Taiwan. The results further revealed no significant differences in mean values.     

Temporal variations of source impacts at the receptor,as derived from air particulate monitoring data in Ho Chi Minh City,Vietnam

Varimax rotation factor analysis was applied to monthly concentrations of elements in total suspended air particulate (TSP) matter in Ho Chi Minh City collected from December 1992 to November 1996, covering four dry/rainy seasons. Six pollution source types were revealed. Resuspended soil/road dust accounts for 74% of the TSP mass loading. Motor vehicles and a source which emits particulates containing arsenic account for 10% and 9%, respectively. There are three minor sources, namely, cement dust from the nearby construction site, road dust of local traffic origin and burning emissions. The contributions from these source were estimated with high uncertainties. The interpretation of sources was corroborated by studying source profiles and temporal variations of source contributions. The monthly variations of source contributions at the receptor were modelled by using source apportionment techniques. From the variation patterns, emission scenarios for burning, construction and motor vehicle sources were reproduced. Source contributions also exhibit seasonal variability induced by changes of meteorological conditions. No seasonal change was found for the As-containing particulates, suggesting a speculation on their origin as coal fly ash emitting from any local coal burning source.     

A Field Intercomparison and Fundamental Characterization of Various Dust Samplers with a Reference Sampler

The European Economic Community Council Directive 80/779/EEC¹ describes air quality limit values and guide values for sulfur dioxide and suspended particulates. However, article 10, paragraph 1 does not define well enough the reference method required, amongst others, for the gravimetric measurement of suspended particulates. It is explicity stated in article 10, paragraph 5 of the directive, that “the commission shall, in selected locations in the member states and in cooperation with the latter, carry out studies on the sampling…of suspended particulates. These studies shall be designed in particular to promote the harmonization of methods of sampling and analysis of these pollutants.” Therefore, in a joint research program the Umweltbundesamt (grant #104 02263), the commission of European Communities (grant #84-B-6642-11-017-11-N) and the U.S. EPA (grant #2-43211-3580) funded the development of a reference dust sampler by the Fraunhofer-lnstitute of Toxicology and Aerosol Research (FhITA, in Hannover, Federal Republic of Germany) in order: ? to study the particle size distribution of ambient air aerosol at a number of selected sites;

? to compare the results obtained with the reference dust sampler with those of particle samplers operated in Europe and the United States;

? to verify the applicability of wind tunnel results to sampling behaviour in the free atmosphere.

     

Sizing of atmospheric particulates with a high volume cascade impactor

This article describes the development of a high volume cascade impactor with a sampling rate of 20 ft³/min that can be powered by high volume blowers in common use for air sampling. With this impactor it is now possible to collect enough sample of atmospheric particulates in a 24 hour period to conveniently determine an aerodynamic size distribution of suspended particulates by gravimetric analysis. The impactor has four stages and an after-filter and separates particles from the air stream by inertial impaction. The effective cutoff diameters for the stages are 7.0, 3.3, 2.0, and 1.1 microns. The after-filter traps the submicron material.     

Removal of NAPLs from the unsaturated zone using steam: prevention of downward migration by injecting mixtures of steam and air

Steam injection for remediation of porous media contaminated by nonaqueous phase liquids has been shown to be a potentially efficient technology. There is, however, concern that the technique may lead to downward migration of separate phase contaminant. In this work, a modification of the steam injection technology is presented, where a mixture of steam and air was injected. In two-dimensional experiments with unsaturated porous medium contaminated with nonaqueous phase liquids, it was demonstrated how injection of pure steam lead to severe downward migration. Similar experiments, where steam and air were injected simultaneously, resulted in practically no downward migration and still rapid cleanup was achieved. The processes responsible for the prevention of downward migration when injecting steam-air mixtures were analyzed using a nonisothermal multiphase flow and transport model. Hereby, three mechanisms were identified and it was demonstrated how the effectiveness of these mechanisms depended on the air-to-steam mixing ratio.     

Significant Relationships Concerning Exponential Transmission or Penetration

This paper reviews the statistical evidence linking human mortality with air pollution due to sulfur oxides and particulates. Three types of analyses are discussed: episodic increases in mortality coincident with high pollution, perturbations in mortality in a given city as a time-series in relation to perturbations in air quality, and comparisons of geographic differentials in both pollution and mortality rates. The paper concludes that there are no reliable statistical associations between SO _x and mortality, but that particulates are in some cases associated with excess mortality. Establishing whether the association is in fact causal would require elimination of potential confounding effects such as occupational exposures.     

A method of assessing air toxics concentrations in urban areas using mobile platform measurements

The objective of this paper is to demonstrate an approach to characterize the spatial variability in ambient air concentrations using mobile platform measurements. This approach may be useful for air toxics assessments in Environmental Justice applications, epidemiological studies, and environmental health risk assessments. In this study, we developed and applied a method to characterize air toxics concentrations in urban areas using results of the recently conducted field study in Wilmington, DE. Mobile measurements were collected over a 4- x 4-km area of downtown Wilmington for three components: formaldehyde (representative of volatile organic compounds and also photochemically reactive pollutants), aerosol size distribution (representing fine particulate matter), and water-soluble hexavalent chromium (representative of toxic metals). These measurements were,used to construct spatial and temporal distributions of air toxics in the area that show a very strong temporal variability, both diurnally and seasonally. An analysis of spatial variability indicates that all pollutants varied significantly by location, which suggests potential impact of local sources. From the comparison with measurements at the central monitoring site, we conclude that formaldehyde and fine particulates show a positive correlation with temperature, which could also be the reason that photochemically generated formaldehyde and fine particulates over the study area correlate well with the fine particulate matter measured at the central site.     

A theoretical model of air and steam co-injection to prevent the downward migration of DNAPLs during steam-enhanced extraction

When steam is injected into soil containing a dense volatile non-aqueous phase liquid contaminant the DNAPL vaporized within the heated soil region condenses and accumulates ahead of the steam condensation front. If enough DNAPL accumulates, gravitational forces can overcome trapping forces allowing the liquid contaminant to flow downward. By injecting air with steam, a portion of the DNAPL vapor remains suspended in equilibrium with the air, decreasing liquid contaminant accumulation ahead of the steam condensation front, and thus reducing the possibility of downward migration. In this work, a one-dimensional theoretical model is developed to predict the injection ratio of air to steam that will prevent the accumulation of volatile DNAPLs. The contaminated region is modeled as a one-dimensional homogeneous porous medium with an initially uniform distribution of a single component contaminant. Mass and energy balances are combined to determine the injection ratio of air to steam that eliminates accumulation of the contaminant ahead of the steam condensation front, and hence reduces the possibility of downward migration. The minimum injection ratio that eliminates accumulation is defined as the optimum injection ratio. Example calculations are presented for three DNAPLs, carbon tetrachloride (CCl4), trichloroethylene (TCE), and perchloroethylene (PCE). The optimum injection ratio of air to steam is shown to depend on the initial saturation and the volatility of the liquid contaminant. Numerical simulation results are presented to validate the model, and to illustrate downward migration for ratios less than optimum. Optimum injection ratios determined from numerical simulations are shown to be in good agreement with the theoretical model.