Polychlorodibenzo-p-dioxins and dibenzofurans in technical pentachlorophenol - results of a collaborative analytical exercise

Results of analyses of eight samples of technical pentachlorophenol conducted by three different analytical methods are presented and discussed.     

痕量壬基酚及相关化合物的样品预处理和测定

对近年来环境样品中痕量内分泌干扰物壬基酚及相关化合物的分离富集方法和测定技术的研究进展进行了综合评述。重点讨论了索氏提取、液液萃取、液膜分离、回流萃取、固相萃取、固相微萃取、超临界流体萃取、超声提取八种样品预处理方法和气相色谱质谱联用、高效液相色谱两种测定方法,而且针对以上方面提出了尚需进一步研究的问题。     

用于地表水反硝化的纤维素碳源选择研究

为了选取合适的天然有机物作为反硝化细菌碳源用于解决地表水中NO3--N污染问题,以江南大学校内湖水为接种物,选取8种天然纤维素碳源在缺氧状态不同的处理方式下对60 mg/L NO3--N的降解特性进行研究。结果表明,以碱处理作为预处理可明显提高反硝化速率,碳源脱氮率均在96%以上（树皮除外）。2种处理方式中均有NO2--N累积,部分碳源释放NH4＋-N并发生DNRA反应,树叶在2种处理中脱氮效果均较好。结合各碳源脱氮率、耗碳源量以及处理成本,选取基本处理的香樟叶作为最佳纤维素碳源。     

Determination of mono-, di- and trinitronaphthalenes in soil samples contaminated by explosives

We investigated the extraction of eight mono-, di- and trinitronaphthalenes from soil samples by ultrasonic, respectively, soxhlet extraction. Sonication was the more convenient procedure with a usually higher repeatability than the soxhlet method. All extracts were analysed by high-performance liquid chromatography with diode array detection. These methods were used to determine the concentration of nitronaphthalenes in five soil samples polluted by explosives. The most abundant contaminants were 1,5- and 1,8-dinitronaphthalene as well as 1,3,5-, 1,3,8- and 1,4,5-trinitronaphthalene. In all samples the sum of trinitronaphthalenes exceeded the sum of mono- and dinitronaphthalenes. It is recommendable to include these eight compounds in the analytical exploration of sites contaminated by explosives.     

A Rapid In Situ Respiration Test for Measuring Aerobic Biodegradation Rates of Hydrocarbons in Soil

An in situ test method to measure the aerobic biodegradation rates of hydrocarbons in contaminated soil is presented. The test method provides an initial assessment of bioventing as a remediation technology for hydrocarbon-contaminated soil. The in situ respiration test consists of ventilating the contaminated soil of the unsatiirated zone with air and periodically monitoring the depletion of oxygen (O2) and production of carbon dioxide (CO2) over time after the air is turned off. The test is simple to implement and generally takes about four to five days to complete. The test was applied at eight hydrocarbon-contaminated sites of different geological and climatic conditions. These sites were contaminated with petroleum products or petroleum fuels, except for two sites where the contaminants were primarily polycyclic aromatic hydrocarbons. Oxygen utilization rates for the eight sites ranged from 0.02 to 0.99 percent O2/hour. Estimated biodegradation rates ranged from 0.4 to 19 mg/kg of soil/day. These rates were similar to the biodegradation rates obtained from field and pilot studies using mass balance methods. Estimated biodegradation rates based on O2 utilization were generally more reliable (especially for alkaline soils) than rates based on CO2 production. CO2 produced from microbial respiration was probably converted to carbonate under alkaline conditions.     

Chemometrics methods for the investigation of methylmercury and total mercury contamination in mollusks samples collected from coastal sites along the Chinese Bohai Sea

The development and application of chemometrics methods, principal component analysis (PCA), cluster analysis and correlation analysis for the determination of methylmercury (MeHg) and total mecury (HgT) in gastropod and bivalve species collected from eight coastal sites along the Chinese Bohai Sea are described. HgT is directly determined by atomic fluorescence spectrometry (AFS), while MeHg is measured by a laboratory established high performance liquid chromatography-atomic fluorescence spectrometry system (HPLC-AFS). One-way ANOVA and cluster analysis indicated that the bioaccumulation of Rap to accumulate Hg was significantly (P<0.05) different from other mollusks. Correlation analysis shows that there is linear relationship between MeHg and HgT in mollusks samples collected from coastal sites along the Chinese Bohai Sea, while in mollusks samples collected from Hongqiao market in Beijing City, there is not any linear relationship.     

Application of ultrasonic assisted extraction of chemically diverse organic compounds from soils and sediments

The objective of this research was the development, optimization, and demonstration of an ultrasonic assisted extraction (UAE) based method for organic anthropogenic waste indicators (AWIs) with a range of physicochemical properties from soil and sediment samples. The optimized method was designed to be cost effective compared to existing extraction methods, which may require large quantities of consumables, produce substantial volumes of organic waste, or require costly instrumentation or equipment. Reagent grade sand, soil collected from the native grassland in proximity to Eastern Washington University (EWU), and sediment samples collected from the Spokane river were used as sample matrices during method development. These matrices were fortified with eight AWIs of varying chemical properties that are representative of a variety of household, industrial, and agricultural sources. The recoveries of the AWIs spiked onto these matrices were determined in the extracts using gas chromatography/mass spectrometry (GC/MS). These values reflect the efficiency of the method for extraction of these analytes from representative environmental matrices. Recoveries ranged from 46.1% to 110% in the fortified soil and from 49.2% to 118.6% in the fortified sediment samples, which is comparable with existing methods for the study analytes. The optimized method was then used to quantify AWIs in a biosolid-amended soil. Indole and p-cresol were detected in the biosolid-amended soil.     

Estimation of efficiency of processing soil samples for pesticide residues analysis

The efficiency of four sample processing methods was tested with eight different types of soils representing the major proportion of cultivated soils. The principle of sampling constant was applied for characterizing the efficiency of the procedures and testing the well-mixed status of the prepared soil. The test material was 14C-labeled atrazine that enabled keeping the random error of analyses 相似文献   

Estimation of Efficiency of Processing Soil Samples for Pesticide Residues Analysis

The efficiency of four sample processing methods was tested with eight different types of soils representing the major proportion of cultivated soils. The principle of sampling constant was applied for characterizing the efficiency of the procedures and testing the well-mixed status of the prepared soil. The test material was 14C-labeled atrazine that enabled keeping the random error of analyses ≤ about 1%. Adding water to the soil proved to be the most efficient and generally applicable procedure resulting in about 6% relative sample processing uncertainty for 20 g test portions. The expected error is inversely proportional to the mass of test portion. Smashing and manual mixing of soil resulted in about four times higher uncertainty than mixing with water. Grinding of soil is applicable for dry soils only, but the test procedure applied was not suitable for estimating a typical uncertainty of processing dry soil samples. Adding dry ice did not improve the efficiency of sample processing.     

Review of strobilurin fungicide chemicals

Strobilurins are natural products isolated and identified from specific fungi. Natural strobilurins were named in the order of their discovery as strobilurin-A followed by strobilurin-B, C, D etc. Their discovery opened the door for new chemistry of synthetic fungicides. Applying Quantitative Structural Activity Relationship (QSAR) on the structures of the natural strobilurins, many pesticide companies were able to discover many synthetic analogues that are more efficacious and more stable fungicides. At present there are about eight synthetic strobilurins in the fungicides worldwide market. Some of these products are worldwide registered for use as agrochemical and some are in the process of registration. This class of fungicides is relatively new, as crop protection products and information about them is still fairly scarce. In this review, syntheses and chemistry of natural and synthetic strobilurins are discussed. Also, the mode of action, efficacy, biotic/abiotic degradation, analytical methods, and agricultural uses are discussed.     

Review of strobilurin fungicide chemicals

Strobilurins are natural products isolated and identified from specific fungi. Natural strobilurins were named in the order of their discovery as strobilurin-A followed by strobilurin-B, C, D etc. Their discovery opened the door for new chemistry of synthetic fungicides. Applying Quantitative Structural Activity Relationship (QSAR) on the structures of the natural strobilurins, many pesticide companies were able to discover many synthetic analogues that are more efficacious and more stable fungicides. At present there are about eight synthetic strobilurins in the fungicides worldwide market. Some of these products are worldwide registered for use as agrochemical and some are in the process of registration. This class of fungicides is relatively new, as crop protection products and information about them is still fairly scarce. In this review, syntheses and chemistry of natural and synthetic strobilurins are discussed. Also, the mode of action, efficacy, biotic/abiotic degradation, analytical methods, and agricultural uses are discussed.     

Immunoassay of red dyes based on the monoclonal antibody of β-naphthol

The objective of the present study was to develop a multi-analyte immunoassay for the determination of eight red dyes in food samples. Two dye intermediates (2-hydroxy-1-naphthoic acid and 1-amino-2-naphthol) were used as the haptens to produce the monoclonal antibodies. The obtained monoclonal antibodies recognized Sudan 1–4, Para red, Sudan red G, Sudan red B and Acid orange II simultaneously. After evaluation of different antibody/coating antigen combinations, a heterologous indirect competitive enzyme linked immunosorbent assay was developed to determine the eight red dyes in food samples (chili oil, chili powder, tomato sauce, hotpot seasoning). The crossreactivities to the eight analytes were in the range of 61%–79% (with β-naphthol as 100%), and the limits of detection were in the range of 1.3–1.9 ng/mL. The recoveries of the eight analytes from the fortified blank samples were in the range of 84.2%–115% with coefficients of variation lower than 18.3%. Therefore, this method could be used as a rapid and simple tool to detect the residues of the eight red dyes in foods.     

Octanol/water partition coefficients for environmentally important organic compounds

Partition coefficients P_O,w ⁽ⁱ⁾ describing the distribution of a solute i onto coexisting phases of 1-octanol and water are needed in a large variety of applications. They can be measured directly by HPLC as long as log P_O,w ⁽ⁱ⁾≧ 3.5. For more hydrophobic substances, several experimental procedures have been proposed in the literature. The reliability of those methods is questionable. Therefore, in the present work, P_O,w ⁽ⁱ⁾ is determined experimentally by three HPLC methods using reversed-phase HPLC [1]. Results from different procedures are compared critically. The method of Braumann [2] proved to be superior over the OECD-guidelines [3]. It was therefore applied to determine octanol/water partition coefficients for 23 substances at 25 °C. For eight of those substances (4-methylindole; 9-(hydroxymethyl)anthracene; N-ethylcarbazol; ethylcyclohexane; trans-2-octene; l,l-dimethyl-(ethy])cyclohexane; heptylbenzene; 4-dodecyl-l,3-benzenediol) no experimentally determined number for P_O,w ⁽ⁱ⁾ has been published before.     

污染土壤电动修复增强方法研究进展

污染土壤电动修复是一项新兴绿色原位修复技术。其原理是在土壤上施加直流电场 ,利用电迁移和电渗去除污染物 ,土壤pH、Zeta电位以及土壤化学性质等因素影响电动修复效果。为了提高修复效率和扩大电动修复应用范围 ,现在已经发展了针对不同类型土壤和污染物的增强修复技术。本文归纳总结了 1995年以来土壤电动修复中常用增强处理效果的 8种方法 ,即酸碱中和法、阳离子选择膜法、电渗析法、络合剂法、表面活性剂法、氧化 还原法、EK 生物联用和LasagnaTM法 ,且对每种方法的典型实验装置、增强原理、方法特点和适用范围等进行了分析和讨论 ,为以后的实验设计提供了有益的参考     

A cross-taxa survey of organochlorine pesticide contamination in a Costa Rican wildland

Amphibians, turtles, birds (mostly passerines) and mice collected from a conservation area in northwestern Costa Rica were analyzed for organochlorine (OC) pesticide contamination. Six of 39 amphibians (three of eight species), three of six turtles (two species), one of eight mice (one species) and 19 of 55 birds (five of seven species) contained OCs at levels up to 580 ng/g. The most frequently detected compound in 23 of 108 organisms was p,p'DDE. Dieldrin, delta-BHC, heptachlor, p,p'DDD, and endosulfan II were each found in at least four organisms, while eight other OCs were found in at least one organism. The presence of OCs in taxa from the conservation area indicates the likelihood of long-distance transport of such compounds through the atmosphere.     

Comparison between solid-phase extraction methods for the chromatographic determination of organophosphorus pesticides in water

A solid-phase microextraction (SPME) procedure has been developed to extract eight organophosphorus pesticides (OPs) in water and the method was compared with a conventional solid phase extraction (SPE) technique. The extracted OPs were analyzed by gas chromatography using thermionic specific detection. Both extraction methods presented linear calibration at least over the concentration range investigated (100 to 1000 ng x mL(-1) for SPE and 1 to 100 ng x mL(-1) for SPME). SPME method presented higher sensitivity than SPE. The quantitation limits were between 0.1 to 1.0 ng x mL(-1) for SPME depending upon the analyte, and 100 ng x mL(-1) for SPE. The precision, as measured by the standard deviations (RSD), were in the range 3.6% to 5.8% for SPME and 2.4% to 9.2% for SPE. Along with the feature of being a solvent - free sampling technique, SPME offers additional benefits due to its high sensitivity, simplicity, and small size sample required (typically: SPE - 500 mL, SPME - 5 mL).     

A multi-residue method for the analysis of organophosphorus residues in cooked and polished rice using accelerated solvent extraction and dispersive-solid phase extraction (D-SPE) technique and uncertainty measurement

Quick, simple and efficient multi-residue analytical methods were developed and validated for the determination of organophosphorous insecticides from polished and cooked rice. Polished rice was extracted using a simple, automated technique namely accelerated solvent extraction (ASE) using dichloromethane as the extraction solvent. Cooked rice was extracted with acetone and cleaned up using dispersive-solid phase extraction (D-SPE) technique. The single step extraction method adopted for polished rice using accelerated solvent extractor provided satisfactory recovery for eight organophosphorus pesticides (OPPs) which ranged from 85.5–116.7%; 90.0–110.3% and 93.5–118.8% at 1, 5 and 10 limit of quantification (LOQ) levels, respectively. The recovery of cooked rice was in the range of 74–124%; from 75–100% and from 73–87% for 1, 5 and 10 level of fortification, respectively. The total uncertainty was evaluated, taking four main independent sources viz., weighing, purity of the standard, GC calibration curve and repeatability under consideration. The expanded uncertainty was found to be in the range of 5–20%.     

Photomirex: A teratogenicity and tissue distribution study in the rabbit

Abstract

Adult New Zealand white does were intubated orally with single daily doses of 0, 5, or 10 mg of photomirex (8‐monohydromirex) per kg body weight from the 6th through to the 18th day of gestation. Pregnancies were interrupted at term by cesarian section and fetuses removed and evaluated by following routine teratologic methods. Both maternal and fetal tissues were analyzed for residues of photomirex. None of the treated does showed any sign of toxicity. Except for a significant reduction in the mean fetal weight of the 10 mg/kg group all other parameters which evaluated fetal survival and fetal development were within the control range. Photomirex was found in all tissues examined. In the doe, the highest levels were found in fat followed by liver, kidney, spleen, heart, brain and blood. Photomirex was readily transferred across the placenta and accumulated in the fetus. However, in the fetus the highest levels were found in the heart, followed by liver, brain and blood. There were no teratogenic effects at the doses used in this study.     

运河（杭州段）底质有机质与重金属元素相关性的探讨

通过对京杭大运河 (杭州段 )底质的监测 ,探讨了底质有机质与 8种重金属元素的相关性 ,并对其成因作出了解释 ,得出了 8种重金属在运河 (杭州段 )底质中易积累的顺序。     

Temporal ecological assessment of oil contaminated soils before and after bioremediation

Ecotoxicity methods were used to assess different soil and oil combinations before, during and after laboratory bioremediation with associated hydrocarbon analysis. Heavy, medium and light crude oil (API gravity 14, 30, and 55) was spiked (ca. 5% w/w) into two sandy soils in the laboratory having organic carbon concentrations of 0.3 (Norwood) and 4.7% (Norwood/Baccto). The earthworm (Eisenia fetida) 14-d lethality assay, the modified Microbics Microtox Solid-Phase assay, and the 14-d plant seed germination and growth assays using corn, wheat and oats, were spiked and tested during a 360-d laboratory remediation. Eisenia was the most sensitive of the three methods utilized with survival increasing throughout bioremediation with fastest toxicity reduction in the high carbon Norwood/Baccto soils where LC50's were 100% or greater at the end of 90-d whereas, > 150-d were required to achieve a similar result in the low carbon soil. Analysis of the undiluted treatments with oily soil alone showed that earthworm survival was high after 90-d in all high organic carbon soils, and after eight months in the low carbon soils, except for the Norwood soil-light oil treatment, which required 360-d to achieve 100% survival. The Microtox assay was less sensitive with EC50's 100% or greater observed after 90-d in high carbon soils and after 240-d for all low carbon soils. After bioremediation, no effects on seed germination were observed, although some plant growth inhibition effects remained. There was no direct correlation between total petroleum hydrocarbon concentrations and toxicity.