Fluorine in the soils of the White Sea Basin and bioindication of pollution

Assessment of the pollution level of soils and vegetation by fluorine and heavy metals and also of the state of the soil microflora in the impact zone of Kandalaksha aluminium factory is discussed. The significant pollution of natural media by fluorine in the basin of the White Sea is established. Concentration of the total fluorine in the organogenic horizon of the Al-Fe-humus podzol soil at a distance of 20 km in the northern direction from the source of emission exceeds the background level by a factor of 3. In the epicentre of emission the amount of total fluorine in the soil exceeds the background level by a factor of 7-8 (Tolerable Amount: 4-5-fold). It is noted that the soil becomes more alkaline under the influence of fluorine and the increased content of chromium along the soil profile exceeds PC by a factor of 3 in the vicinity of the factory. The differences in the dimensions of bacterial and fungi biomass along the gradient of pollution were not revealed in the impact zone. But the changes in the taxonomic structure of fungi and in the level of their domination along the gradient of pollution were estimated. Floristic composition of the soil algae is represented mainly by unicellular green algae with Chlamydomonas elliptica and Bracteacoccus minor predominating.     

Bioclimate and city planning – open space planning

The planning and using of open spaces in urban areas very much depend on the shading of the surrounding building structures. This article presents a method for the investigation of the sunlight and the bioclimatic conditions in dependence on the surrounding buildings. It is illustrated for typical courtyards in Berlin, Germany, as one type of open spaces. The programme HelioDat determines the shading of any spot of an open space. It gives the possible duration of direct sunlight for the selected spot for each day of the year. The sunlight conditions in the courtyards differ from one another a lot in dependence on their size the tallness of the surrounding buildings. The calculation of the PMV on the basis of the results of the programme HelioDat determine the bioclimatic situation in the discussed courtyards. Although the results of HelioDat are only one input among the weather conditions and the personal characteristics of the test-person, the bioclimatic conditions correlate very much with the sunlight conditions. In a projected building structure, the sunlight conditions vary a lot between the present situation and the two architectural alternatives. Since the bioclimatic situation is correlated to the sunlight conditions, this example demonstrates the importance for the investigation of the sunlight conditions and the bioclimate already during the planning process of buildings.     

Investigation of the effects of using single-wall carbon nanotubes (SWCNTs) in ozone measurement with passive samplers

Passive samplers are used in air quality monitoring for many years to compete in terms of being economical with continuous measurement systems. In this study, different amounts of single-wall carbon nanotubes (SWCNTs) were added in the impregnation solution of the filters of passive samplers and the effect on the absorption of ozone studied. The results of the measurement of ozone with varying amounts of SWCNTs added to the impregnation solution of the filters of the passive samplers were compared with the results of the continuous ozone measurement system (CS). Measurements were performed for 7 days and 14 days at two different exposure times. The increase of the amount of SWCNTs on the filters of the passive samplers, however, did not have an effect on the measurement of ozone. The measurement results of the passive samplers of the 14-day exposure periods, alternating with the 7-day exposure periods, were lower considerably than the results of the 7-day exposure.

Implications: The accuracy and the use of passive samplers in SWCNTs are expected to provide high measurement results. Observing the effect of the change in the amount of diffusion of pollutants held in the SWCNT is also one of the expected implications.     

The effect of improved nowcasting of precipitation on air quality modeling

The predictive potential of air quality models and thus their value in emergency management and public health support are critically dependent on the quality of their meteorological inputs. The atmospheric flow is the primary cause of the dispersion of airborne substances. The scavenging of pollutants by cloud particles and precipitation is an important sink of atmospheric pollution and subsequently determines the spatial distribution of the deposition of pollutants. The long-standing problem of the spin-up of clouds and precipitation in numerical weather prediction models limits the accuracy of the prediction of short-range dispersion and deposition from local sources. The resulting errors in the atmospheric concentration of pollutants also affect the initial conditions for the calculation of the long-range transport of these pollutants. Customary the spin-up problem is avoided by only using NWP (Numerical Weather Prediction) forecasts with a lead time greater than the spin-up time of the model. Due to the increase of uncertainty with forecast range this reduces the quality of the associated forecasts of the atmospheric flow.In this article recent improvements through diabatic initialization in the spin-up of large-scale precipitation in the Hirlam NWP model are discussed. In a synthetic example using a puff dispersion model the effect is demonstrated of these improvements on the deposition and dispersion of pollutants with a high scavenging coefficient, such as sulphur, and a low scavenging coefficient, such as cesium-137. The analysis presented in this article leads to the conclusion that, at least for situations where large-scale precipitation dominates, the improved model has a limited spin-up so that its full forecast range can be used. The implication for dispersion modeling is that the improved model is particularly useful for short-range forecasts and the calculation of local deposition. The sensitivity of the hydrological processes to proper initialization implies that the spin-up problem may reoccur with changes in the model and increased model resolution. Spin-up should be an ongoing concern for atmospheric modelers.     

An application of the theory of kinematics of mixing to the study of tropospheric dispersion

The most common technique used for numerical simulations of tracer mixing is that of the numerical solution of the advection–diffusion equation with the unresolved fluxes parameterized using the similarity theory. Despite correct predictions of the overall directions of transport, models based on a numerical solution of the advection–diffusion equation lack sufficient accuracy to correctly reproduce the coupling of mixing with small scale processes which are sensitive to the microstructure of the tracer distribution. The objective of this paper is to revisit the basic formalism employed in numerical models used to investigate atmospheric tracers. The main mathematical method proposed here is the theory of kinematics of mixing which could be applied effectively for simulations of atmospheric transport processes. At the beginning of the paper, we introduce simple mathematical transformations in order to demonstrate how complex topological structures are created by mixing processes. These idealistic flow systems are essential to explain transport properties of much more complex three-dimensional geophysical flows. An example of the application of the kinematics of mixing to the analysis of tracer transport on a planetary scale is presented in the following sections. The complex filamentary structures simulated in the numerical experiment are evaluated using some commonly applied statistical measures in order to compare the results with the data published in the literature. The results of the experiment are also analysed with the help of simple conceptual models of fluid filaments. The microstructure of the tracer distribution introduced in the paper is essential to increase our understanding of atmospheric transport and to develop more realistic parameterizations of small-scale mixing. The presented results could also be used to improve calculations of the coupling between microphysical processes and tracer mixing.     

Chlorinated dibenzo-<Emphasis Type="Italic">p</Emphasis>-dioxins and dibenzofurans in the baltic herrinj and sprat of estonian coastal waters

BACKGROUND, AIMS AND SCOPE: The concentration of chlorinated dibenzo-p-dioxins and dibenzofurans in many fish from the Baltic requires monitoring, since it approaches or exceeds the European Union threshold limit value of 4 pg TEQ/g wet weight of fish for human consumption. The concentrations, expressed in TEQs, are important for toxicology and regulations, but hide the concentrations of the individual congeners, which are important for other environmental sciences, source allocation, and for the detection of measurement errors. This report evaluates the results of a survey reported earlier only in the terms of the TEQ concentrations. METHODS: Principal Component Analysis (PCA) was used to reduce the dimensions of the data (17 = 7 chlorinated dibenzo-p-dioxin and 10 chlorinated dibenzofuran congeners) to three principal components. This facilitated the interpretation of the congener profiles. Slopes of the congener concentrations as a function of age of the fish were estimated by least squares regression. The results were compared with a large set of data for lake trout from Lake Ontario. RESULTS AND DISCUSSION: The congener profiles of Baltic herring are less scattered than those of sprat. The profiles of herring from the central Baltic differ from those of herring from the Gulf of Riga and both appear to be affected relatively minimally by the age of the fish. The congener profiles of herring from the western Gulf of Finland are similar to those from the central Baltic, those from middle Gulf of Finland are similar to those from the Gulf of Riga. Both seem to be more affected by age of the fish than the profiles of the first two groups. The concentrations of several pentachloro- and hexachloro-dibenzo-p-dioxins and dibenzofurans increase with the age of the fish CONCLUSION: PCA is a good technique for the evaluation of the congener profiles. The resulting loading and score plots provide a good graphic summary of the multidimensional data. Additional analyses are needed to confirm the observed profile patterns. A comparison with the results of a long-term monitoring from another area shows that the age of the fish is a more important factor than the year of capture. RECOMMENDATION AND OUTLOOK: The surveys should continue for a number of years and the results should be presented and evaluated both in terms of the TEQs as well as in terms of weight concentrations. Since the concentrations do not appear to change very much from year to year, it would be better to carry out surveys only every 3-4 years and, instead, stratify the sampling according to age and gender of the fish, and to analyze replicate extracts by replicate measurements. The inclusion of unmarked replicate samples would be a good quality assurance measure. It would be desirable to analyze additional parts of the food chain in order to understand the fate of the compounds in the ecosystem.     

Study on the photocatalytic reduction of dichromate and photocatalytic oxidation of dichlorvos

In this paper, dichromate and dichlorvos are selected as the deputies of inorganic and organic pollutants, respectively, and TiO2/beads is used as a photocatalyst. The effects of various parameters, such as the amount of the photocatalyst, H2O2 concentration, metal ions, anions, pH value, and organic compounds on the photocatalytic reduction of dichromate and photocatalytic oxidation of dichlorvos are studied. From the studies, the differences of the parameters effect on the photocatalytic degradation of organic and inorganic pollutants are obtained. The results show that the optimum amount of the photocatalyst used is 6.0 g cm(-3) for the photocatalytic reactions. With the addition of a small amount of H2O2, the photocatalytic reduction of dichromate is inhibited while the photocatalytic oxidation of dichlorvos is accelerated. With the addition of trace amounts of Fe3+ or Cu2+, both the reactions are accelerated, and with the addition of Zn2+ and Na+, no obvious effects on the reactions are observed. Acidic solution is favorable for the photocatalytic reduction of dichromate; and acidic and alkaline solutions are favorable for the photocatalytic oxidation of dichlorvos. Adding SO4(2-), the photocatalytic oxidation is accelerated and adding Cl- the reaction is inhibited; and with the addition of trace amounts of SO4(2-), Cl- and NO3-, no obvious effects on the photocatalytic reduction of dichromate are observed. With the addition of methanol and toluene, the photocatalytic reduction of dichromate is accelerated, and the photocatalytic oxidation of dichlorvos is inhibited. The possible roles of the additives on the reactions are also discussed.     

Weathering patinas on the medieval (S. XIV) stained glass windows of the Pedralbes Monastery (Barcelona, Spain)

Background, aim, and scope  The first step in the restoration of a medieval stained glass window is the evaluation of its degree of degradation. This implies the study of the chemical composition of the stained glass as well as the new mineral phases developed on its surface (patinas). Patinas are clearly related to glass composition, time, environmental conditions, microenvironments developed in local zones, bioactivity, physical and chemical factors, etc. This study was carried out on patinas developed in selected Na-rich stained glass of the Santa Maria de Pedralbes Monastery (Barcelona, Spain). The location of this monument in the city (about 5 km from the shoreline and close to the Collserola hill flank) helped to determine the environmental conditions in which patinas developed. The aim of our study was to characterize the patinas formed on the surface of the selected glass of this monastery in order to understand the role of the chemical composition of the original glass (Na-rich) as well as the environmental conditions in which they developed. Materials and methods  Powdered samples of two different color-type patinas (ochre-orange and brownish) were collected in the external and internal parts of the stained glass windows of the Prebystery and Chapter House of the Pedralbes Monastery by using a precision (odontological) drill. These patinas were subsequently analyzed by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Results  XRD analyses evidenced the presence of sulfates (gypsum and thenardite), calcite, Ca-oxalates (whewellite and weddellite), and quartz forming part of the patinas. Although these mineral phases can be found in both color-type patinas, whewellite and thenardite are more common in the ochre-orange patinas. The results obtained were validated by the FTIR measurements. It has been observed, when thenardite is present, that gypsum occurs as traces. Thenardite is in most of the cases associated with whewellite and mainly occurs in the internal parts of the glass. In contrast, weddellite is limited to the absence of thenardite and whewellite and to the external parts of the stained glass. Quartz is present in all the patinas independent of their location and color. Calcite also occurs in many samples. It appears in both color-type patinas and, in some cases, is associated to the presence of weddellite but not to whewellite and/or thenardite. Discussion  Glass composition together with environmental conditions and location of the patinas (internal or external parts of the stained glass window), as well as the provenance of the glass within the monastery, are the main factors that define the development of the new mineral phases. Moreover, the action of microorganisms, when present, can also strongly influence the development of some mineral phases. For example, the formation of calcite in the external parts of the stained glass (associated with the presence of oxalates) is related to the action of microorganisms. When calcite is formed in the internal parts of the glass and it is not associated with the presence of Ca-oxalates, an inorganic origin can be invoked. The presence of weddellite requires a very humid microenvironment with very little exposure to sunlight. In fact, this mineral phase has only been observed in the external parts of some glass located in the humid and shady side of the monastery. Whewellite (which only appears in the internal parts) needs a low degree of relative humidity. It has been observed that sulfur precipitating in basically one mineral phase (thenardite or gypsum) depends on the microenvironmental conditions of the moment and the glass composition. When thenardite occurs, it can be maintained that the original glass is of Na composition. The occurrence of quartz in all samples is interpreted as being due to the deposition of atmospheric particulate matter. The color of the patinas can be originated by different processes (presence of carotenes, organic pigmentation, atmospheric contamination, etc.). Conclusions  In the case of moderately weathered stained glass windows, the combination of XRD and FTIR techniques is very useful to obtain a fast preliminary evaluation of the degree of weathering of a stained glass window. The presence of specific mineral phases in the patina (e.g., thenardite) confirms the Na composition of the original stained glass. This is important since Na-rich glass underwent a lesser degree of weathering than K- or K-Ca-rich glass. However, their absence cannot preclude other possibilities. It has been extensively evidenced through time that environmental conditions play an important role on the formation of the different mineral phases which form part of the patinas. Recommendations and perspectives  The first step in the restoration of a stained glass window is the evaluation of the degree of deterioration of the glass. This evaluation includes a chemical analysis of the glass as well as a characterization of the patinas developed on their surfaces. The obtained results will be essential in order to define the best restoration practices to be followed.     

Effects of a major municipal effluent on the St. Lawrence River: A case study

The St. Lawrence River (SLR) is the second largest waterway in North America. The discharge of the City of Montreal wastewater treatment plant (WWTP) represents the largest volume of treated wastewaters being released into the river. It also ranks as the largest sewage treatment plant of its kind in North America. Over the last decade, intensive multidisciplinary research has focused on assessing the impacts of Montreal wastewater effluents on the SLR. We describe the major findings of these investigations, including the determination of the fate of contaminants, bioaccumulation in fish and invertebrates, ecotoxicological measurements of aquatic animal health, evaluation of endocrine disruption, parasitism in fish, and combined effects of multiple stressors on the SLR. Impacts of the effluents from the WWTP on aquatic organisms from the SLR are both toxicological and ecological, demonstrating the need for an integrated view of the impacts of municipal effluents on aquatic ecosystems.     

Enhancement of ozone oxidation and its associated processes in the presence of surfactant: degradation of atrazine

In this study, the degradation of atrazine (ATZ) by ozone (O3) oxidation and its associated processes (i.e. UV, UV/O3) in the presence and absence of surfactant was investigated and compared. A non-ionic surfactant, Brij 35, was selected. It was found that the presence of a low concentration of surfactant could improve the removal of ATZ by increasing the dissolution of ozone and the indirect generation of hydroxyl radicals. The saturated ozone level and the reaction rate constants were increased with increasing the concentration of surfactant and then decreased at higher surfactant doses at pH level of 2.5. A similar trend was observed at pH level of 7.0 in the presence of bicarbonate ion, because it is capable of deactivating the hydroxyl radicals generating at higher pH level. However, when the radical reactions become dominant in the ozonation (at pH 7.0 without bicarbonate), the saturated ozone level was higher than that with bicarbonate and the kinetic rate constants were increased first and levelled off with increasing of the dose of surfactant. Through the examining of a proposed unit performance index, the low concentration of surfactant is surely beneficial to the ozonation process. Besides, the direct photolysis and photo-assisted ozonation were compared to the ozonation. A significant enhancement on the decay rate of ATZ was resulted exclusively by adding the surfactant. An enhancement index for quantifying the improvement of the various processes was developed.     

Phototransformation of methabenthiazuron in the presence of nitrate and nitrite ions

The influence of nitrate and nitrite ions on the degradation of methabenzthiazuron upon irradiation using artificial solar light has been investigated. The rate of degradation of methabenzthiazuron (1 microM) was accelerated by NO3- (0.1 mM) by a factor of 10. The irradiation of methabenzthiazuron (0.1 mM) in the presence of NO3- (1 mM) or NO2- (0.1 mM) yielded numerous intermediary photoproducts. Mineralization was achieved after prolonged exposure. Some were identified with the help of LC-ESI-MS and flow injection APCI-MS techniques. Both oxidations of the aromatic ring and of the urea chain were observed. The former started by hydroxylation of the ring. Further oxidation of the ring led to cleavage of the benzenic ring with formation of dialdehydic, diacidic and anhydric compounds. Complete removal of the lateral urea chain took place subsequently to demethylation of the terminal methyl group and loss of the CO-NH2 group. Nitration was a minor process. This work shows that the photodegradation of methabenzthiazuron in the presence of nitrate or nitrite ions is highly non-specific.     

Study of fractionation and potential mobility of metal in sludge from pyrite mining and affected river sediments: changes in mobility over time and use of artificial ageing as a tool in environmental impact assessment

Sludge from mining exploitation can be a source of land and water contamination in the adjacent zone. Accidents such as the break of waste mining pools in the Aznalcollar Mine (Seville, Spain) in 1998 produce important ecological disasters. In this work is presented a study of the evolution of aqua regia leachable concentration and mobility of metals in sediment samples of Guadiamar River basin from the accident date up to 2001. The application of BCR standard extraction procedures provides valuable information about the mobility and toxicity of the spill and the metal mobility in Guadiamar River polluted sediments. As a rule, themobility of several metals in the initial sludge (sulphides) is low, except for copper. Otherwise, the results of aqua regia leachable concentration and mobility of metal obtained for sediments samples indicate that the cleaning and inertisation works carried out in the zone have been adequate but insufficient, being the metal levels observed in the zone are higher than natural levels. To establish the initial impact of the spill and the mobility changes with time, mineralogical composition of the pyritic sludge and its evolution after the natural weathering and after the induction, of accelerated ageing processes by light and temperature was studied in the laboratory. Oxidation of initial sulphides to sulphates was observed. Both environmental and laboratory oxidation of the metallic sulphides increase the mobility of all metals, especially of copper, zinc and lead. The proposed laboratory procedure allows to predict the changes in mobility and therefore in toxicity that can occur at short or long term after exposure of sludge at environ-mental conditions. The mobility results in sludge and sediment samples are interpreted in terms of the mineral composition of the samples.     

Evaluation of effluent toxicity and ambient toxicity in a polluted lowland river

The impact of an industrial effluent containing high loads of calcium, cadmium, lead chloride and sulphate, on a river ecosystem was assessed using a combination of an effluent toxicity test, an ambient toxicity test and an ecological survey. Only this combination of techniques made it possible to discriminate between the effects of the discharge and those of the background pollution. Each of the individual techniques detected essential effects which the other failed to reveal. With the physical and chemical measurements, important increases of several components were measured at all sampling sites downstream of the discharge. With the ecological survey, however, no large changes in water quality could be determined at the sampling sites, due to the high degree of pollution present upstream of the discharge. Reproduction of Daphnia magna, exposed to sublethal effluent dilutions, was followed over two generations. The offspring of the first generation were shown to have an increased sensitivity to the effluent, compared to the first generation that was born from previously unexposed mothers. Besides the toxicity of the effluent, the acute and chronic toxicity of its main component, CaCl(2), was also determined. The results of the CaCl(2)-tests and toxicity data from literature for the suspected toxicants were transformed to Toxic Units (TU). Using the sum of the TUs we investigated the possibility of predicting effluent toxicity to Daphnia magna. Effluent toxicity was under-estimated by calculating the sum of the TUs of the individual components. Dilution of the effluent to a level at which the measured toxicant concentrations comply with European regulations still showed significant effects on Daphnia reproduction.     

Cold War and the environment: the role of Finland in international environmental politics in the Baltic Sea region

The Convention on the Protection of the Marine Environment of the Baltic Sea Area signed in 1974 in Helsinki is probably the most important environmental agreement consummated in the Baltic Sea region. This article is the first study that explores the history of this agreement, also known as the Helsinki Convention, by using primary archival sources. The principal sources are the archives of the Ministry for Foreign Affairs of Finland. We examine the role of Finland in the process that led to the signing of the Helsinki Convention from the perspective of international politics. The study focuses primarily on Finnish, Swedish, and Soviet state-level parties from the end of the 1960s to 1974. We show that Cold War politics affected in several ways negotiations and contents of the Helsinki Convention. We also argue that the Soviet Union used the emerging international environmental issues as a new tool of power politics.     

Experimental research on recolonisation with <Emphasis Type="Italic">Anemone nemorosa</Emphasis> of the beech forests of the Ruhr district (Germany) floristically impoverished by air pollution

BACKGROUND, AIM, AND SCOPE: High SO(2) concentrations as have been observed over decades in the Ruhr district lead to a remarkable reduction of leaf area in the majority of the characteristic broad-leafed herbs of the Central European beech forests even after only a few months of experimental fumigation. Thus, it is no wonder in the time of high SO(2) pollution, e.g., in the town of Herne (centre of the Ruhr district), that there was not a single beech forest hosting, for instance, Viola reichenbachiana or Anemone nemorosa. As air quality has improved very much over some decades in the Ruhr district, one can expect a recolonisation of the beech forests by the species of former time characteristic for the herb layer. However, one has to consider that only the air pollution was reduced, while soil acidification and contamination with heavy metals and PAH are, on the short run, irreversible. That is why experiments were carried out, considering the question as to whether recolonisation of the forests of the Ruhr district by the aforementioned species is possible and why such a recolonisation up to now has not occurred. MATERIALS AND METHODS: The experiments were carried out in a beech forest situated in the centre of the Ruhr district in the City of Herne. The wood anemone (A. nemorosa) was chosen as test plant because of its high frequency in beech forests on loess soils outside the Ruhr district, and its absence in beech forests in the Ruhr district. The experiments with A. nemorosa were carried out in three variants with different soils: (a): soil of the local forests (R); (b): soil of the local forests whose soot layer was removed (r); (c): imported soil from a clean air region far away from the Ruhr district (Odenwald). RESULTS: Survival of rhizomes of A. nemorosa is possible for some years in the soils of the Ruhr district; however, the establishment of a population could not be achieved. The results obtained by the imported soil show that it is no longer air pollution, but the soil which prevents the establishment of a population. Sexual reproduction is rather impossible because of the thick litter layer with which all of the Ruhr district's beech forests are covered. DISCUSSION: With respect to the unfavourable chemistry of the soil of the Ruhr district and in consideration of the unfavourable attributes of the soot layer, the author expected the following order of the development of shoot numbers: O > r > R. However, the result is: O > R > r. In contrast to the expected result, the soot layer has no negative but slightly positive effects on the implanted rhizomes. A possible explanation is that the soot layer, which is situated immediately below the top soil, prevents the top soil from drying up and thus even protects the rhizomes from desiccation. Also, the possibility has to be considered that the soot layer functions as a nutrient storage area. CONCLUSIONS: At present, a survival of the rhizomes of A. nemorosa in the soils of the Ruhr district is temporarily possible but does not lead to the establishment of a permanent population. This only can be achieved by additional sexual reproduction. However, the thick litter layer present in all beech forests of the Ruhr district prevents the establishment of seedlings, i.e., it does not allow sexual reproduction to contribute to the population. The soot layer situated below the litter layer represents a second hindrance for germination. Other than seedlings, rhizomes are not negatively affected by the soot layer but even a slight stabilisation has to be stated. As a reason for this slightly positive effect, a protection of the upper mineral soil from desiccation by the hydrophob soot layer has to be considered. Secondly, the soot layer may serve as a nutrient storage which is of particular importance in acid soils, because acidification generally leads to a leeching of nutrients. To answer these questions, detailed further research is necessary. RECOMMENDATIONS AND PERSPECTIVES: In order to restore the formerly rich herbaceous layer of the forests of the Ruhr district, experiments (removal of the litter layer; liming; ploughing) should be carried out at broad-scale to solve the question of how the strong negative effects of the established thick raw humus layer can be reduced or even be avoided. When the problem of the humus layer is solved, the beech forests of the Ruhr district today highly impoverished in species will become a vivid ecosystem, rich in flowering herbaceous species and thus much more attractive for the people of the Ruhr district than at present.     

作物秸秆对铜绿微囊藻的抑制作用

通过室内模拟实验研究了大麦、水稻和小麦3种作物秸秆对铜绿微囊藻(Microcystis aeruginosa)的抑制作用,并计算了不同秸秆的抑制率和抑制中浓度（EC₅₀）。研究结果表明,大麦秸秆、水稻秸秆和小麦秸秆对铜绿微囊藻的生长有显著的抑制作用,而且随着培养时间和秸秆投加量的增加,抑制作用提高。处理96 h后大麦和水稻秸秆处理下的铜绿微囊藻几乎全部死亡,表明本研究所用不同作物秸秆对铜绿微囊藻的生长有显著的抑制效果。研究结果还表明,大麦、水稻和小麦秸秆对铜绿微囊藻的72 h-EC₅₀由大到小依次是大麦>水稻>小麦,分别为248、334和1 943 mg/L,表明不同植物的秸秆对藻类的影响作用不同。分析3种秸秆抑制铜绿微囊藻生长的原因可能是3种植物秸秆在好氧的条件下可以分解产生多种具有抑藻作用化学物质,如有机酸、含甲基的酚类物质、醇类和酮类物质等,这些物质通过化感作用抑制铜绿微囊藻的生长,尤以大麦秸秆作用最为明显。     

光磁耦合污水处理装置的设计及运行效果分析

基于光催化技术和磁场能够改善污水处理效果的性质,开发了一种光磁耦合污水处理装置。紫外线强度分布的设计计算采用多点源叠加近似辐射模型;磁感应强度的产生选用亥姆霍兹线圈,并采用MATLAB对反应器的磁场进行了磁场强度分布的可视化模拟;采用流体力学软件CFD对装置内流场进行了数值模拟。结果表明,灯管之间的反应器壁附近区域的紫外线强度最小,而在3根紫外灯管间的区域紫外线强度较强且相对均匀;亥姆霍兹线圈内部磁场可近似作为匀强磁场;在该装置反应区存在循环流,有利于提高光磁耦合反应速率。对反应器效果进行验证表明,该反应器对污水的脱色率和COD去除率均较高,磁性光催化剂回收率达到97%以上;光磁耦合法废水处理效果明显高于磁场和光催化作用单独处理效果。     

Energy consumption and energy-saving potential analysis of pollutant abatement systems in a 1000-MW coal-fired power plant

Pollutant abatement systems are widely applied in the coal-fired power sector, and the energy consumption is considered an important part of the auxiliary power. An energy consumption analysis and assessment model of pollutant abatement systems in a power unit was developed based on the dynamic parameters and technology. The energy consumption of pollutant abatement systems in a 1000-MW coal-fired power unit that meets the ultra-low emission limits and the factors of operating parameters, including unit load and inlet concentration of pollutants, on the operating power were analyzed. The results show that the total power consumption of the pollutant abatement systems accounted for 1.27% of the gross power generation during the monitoring period. The wet flue gas desulfurization (WFGD) system consumed 67% of the rate, whereas the selective catalytic reduction (SCR) and electrostatic precipitator (ESP) systems consumed 8.9% and 24.1%, respectively. The power consumption rate of pollutant abatement systems decreased with the increase of unit load and increased with the increase of the inlet concentration of pollutants. The operation adjustment was also an effective method to increase the energy efficiency. For example, the operation adjustment of slurry circulation pumps could promote the energy-saving operation of the WFGD system.

Implications: The application of pollutant abatement technologies increases the internal energy consumption of the power plant, which will lead to an increase of power generation costs. The real-time energy consumption of the different pollutant abatement systems in a typical power unit is analyzed based on the dynamic operating data. Further, the influence of different operating parameters on the operating power of the system and the possible energy-saving potential are analyzed.     

The Dismantling of End-of-Life Vehicles in Estonia Before Putting into Effect the Directive 2000/53/EC (3 pp)

Background, Aims and Scope When joining the European Union on 1st May 2004, Estonia had to conform its legislation to the European Union legislation. In relation with that, also the treatment requirements on end-of-life vehicles proceeding from Directive 2000/53/EC of the European Parliament and of the Council of 18 September 2000 were established in Estonia for the first time. Since this area was not regulated with law beforehand, there was not any information available about it. The aim of the current survey was to ascertain the condition of scrap yards in mid 2004. In addition to that, also to identify the number of scrap yards operating in Estonia, to classify these by the number of dismantled vehicles and the potential environmental hazard, and to map the locations of car dismantling companies and evaluate their compliance with the valid requirements. Methods The companies that have been registered in the Commercial Registry under the activity code 503090-end-of-life vehicle dismantling were visited and visually reviewed. During the visits, the compliance of scrap yards with the existing requirements was evaluated and it was also attempted to identify how environmentally sound the dismantling technology of every scrap yard owner is. Results and Discussion Altogether, 63 scrap yards operated in Estonia by mid 2004. Twelve of them dismantled more than 100 vehicles, 13 of them 51-99 vehicles and 38 up to 50 vehicles a year. The total annual market capacity on dismantling of vehicles in Estonia is considered to be approx. 10,000 units. There are very few companies dealing only with car dismantling as the main business. Most scrap-yard owners also offer side services, e.g. haulage, car repair and maintenance. The dismantlers are interested in the selling of second-hand spare parts and scrap metal. Only one company out of 63 complied with all the requirements enacted by the relevant decision of the Estonian Minister of Environment. The rest of the scrap yards did not meet the requirements on the site on storage and treatment nor did they have the hazardous waste handling licence or the waste permit. Of the requirements established for the site for storage of end-of-life vehicles, 97% of the scrap yards were surrounded with a fence, 67% had a 24-hour guard, 45% had covered the areas with waterproof cover, but only 3% had an oil trap. Sites for treatment were in a somewhat better condition, these were mostly situated inside the buildings, where floors were covered with waterproof covers. Most of the dismantlers collected the waste oil and waste fluids into separate vessels, but there were a number of dismantlers who did not know of existence of polychlorinated biphenyls (PCB) in car air conditioning systems and the availability of mercury in sensors belonging in passenger safety systems. Proceeding from the general condition of the scrap yard, the rest of 62 scarp yards were distributed between two empirical parameters - 'rather environmentally hazardous' or 'rather not environmentally hazardous'. As a matter of fact, 17% of scrap yards turned out 'rather environmentally hazardous'. Conclusion Out of the scrap yards operating in Estonia, only one is compliant with the requirements set up by Directive 2000/53/EC. Another 62 appeared during the review to be sites of potential environmental pollution. In order to comply with environmental requirements and get the hazardous waste treatment license, the scrap yard owners have to invest into state-of-the-art dismantling and environment protection equipment. The main obstacle to reach the environmentally sound scrap-yard is the high investment cost and the black market for spare parts. Recommendation and Outlook As the correction of the market in end-of-life vehicle treatment started after the adoption of Directive 2000/53/EC, the environmental authorities have to look after the ongoing correction. It is because there is still a demand for cheap spare parts and it makes it attractive to dismantle the vehicles out of scrap-yards by licensees.