Monitoring Sulfur Dioxide with Lead Peroxide Cylinders

The results of source tests to demonstrate the applicability of direct-flame incineration for the control of the effluent from a wire-enameling bake oven are presented. The tests were conducted with a portable direct-flame incinerator under actual plant conditions. The efficiency of direct-flame incineration was established at incineration temperatures of 1000F, 1200, and 1400°F. Evaluation of incineration efficiency was performed by both analysis and quantitative odor measurement using an odor panel.     

生活垃圾焚烧烟气排放中二噁英对人体健康的风险评价

随着垃圾焚烧的广泛应用,由此产生的二次污染问题也日益显现出来,特别是二嗯英污染已引起世界的关注。这也是垃圾焚烧设施在环评阶段遭到周围公众反对的原因之一。文中介绍了二嗯英的危害、垃圾焚烧烟气中的二嗯英来源以及二嗯英的相关标准。以某垃圾焚烧发电厂为例,对垃圾焚烧烟气中的二嗯英类物质对人体健康的风险进行了评价,并提出了如何最大限度地减少垃圾焚烧处理过程中的二唔英排放量。     

湿解焚烧综合处理垃圾技术的原理及应用

详细介绍了湿解焚烧处理生活垃圾技术的原理和其在武汉经济技术开发区的具体应用，并简述了其在一段时间的调试和运行后表现出的优点。为国内未来垃圾气化熔融焚烧技术的推广提供了参考。     

回转窑式纯氧熔融焚烧垃圾技术研究

生活垃圾安全无害化处理是目前迫切需要解决的问题,直接气化熔融焚烧垃圾技术以降低二恶英排放方面巨大优势得到广泛关注,在此基础上提出纯氧熔融焚烧垃圾技术,几乎可以实现所有二次污染物近零排放。以350 t/d回转窑垃圾焚烧炉为例,对纯氧代替空气应用在回转窑上熔融焚烧垃圾系统进行了详细热力计算及分析。结果表明,纯氧熔融焚烧垃圾系统的锅炉效率可达90.56%,回转窑熔融焚烧系统还可以在垃圾焚烧后灰渣达到熔融温度的条件下,保持该系统热量平衡,稳定燃烧。并参考回转窑设计标准对该纯氧熔融焚烧城市生活垃圾的回转窑参数进行确定。     

湿解焚烧综合处理垃圾技术的原理及应用

详细介绍了湿解焚烧处理生活垃圾技术的原理和其在武汉经济技术开发区的具体应用,并简述了其在一段时间的调试和运行后表现出的优点.为国内未来垃圾气化熔融焚烧技术的推广提供了参考.     

控制城市垃圾焚烧二噁（口英）产生与扩散方法

控制垃圾焚烧二产生与扩散分三部分首先,通过预处理除去原生垃圾中的聚氯乙烯塑料,从源头上控制垃圾焚烧二哄产生的物质基础;其次,垃圾焚烧炉采用组合式循环流化床锅炉,实行垃圾先低温热解气化,然后高温燃烧垃圾热解气体的方式,同时在炉内加入添加剂实现稳定燃烧和部分脱氯,以减少二哄在炉内生成和炉后形成量;最后,在烟气尾部采用吸附剂吸附二哄,并与布袋除尘器配套使用,控制二哄的尾部扩散.该工艺具有成本低、控污效率高等优点,特别适用于发展中国家的垃圾焚烧二哄控制.     

Proportional Sampling System for the Collection of an Integrated Auto Exhaust Gas Sample

Carbon baking process involves evolution of fumes containing hydrocarbons and soot particles which cannot be discharged directly into the atmosphere. An incinerator can be used to clean these fumes. However, length of the baking cycle, nature of the fumes and variations in fume volume and temperature may result in excessive auxiliary fuel usage and inefficient incineration, if the incinerator is not designed properly. This paper describes the application of fundamental knowledge of aerodynamics, reaction kinetics and combustion, together with clear understanding of the process, in design of a highly efficient, fully automated incinerator. The design incorporates a unique but simple control system which results in reduction of auxiliary fuel usage without endangering the safety and efficiency of the incineration process. Operations and economics of the incinerator are described by illustrating a typical baking cycle and comparing actual fuel usage with the thermal ratings of the incinerator. Operating experience from a number of installations in the U. S. and Canada is also noted.     

Application of fluidized bed combustion to industrial waste treatment

Landfill and sea-dumping appear to be on their way out as acceptable methods for the disposal of untreated industrial wastes in Taiwan. Recently, there has been interest in the application of fluidized bed technology to waste incineration for efficient energy utilization and environmental protection. A pilot fluidized bed combustion system was used to investigate the incineration performance and parametric test for the waste from an industrial park. According to the experimental results, the appropriate operating conditions, including temperatures of 800-840 degrees C, aeration rates of U(0)/Um(f)-2.0 or so, and on-bed feeding, were recommended to treat such waste. The emissions of SO(x), NO(x) and CO in flue gas meet the ROC-EPA regulation.     

Development of an Odor Panel for Evaluation of Odor Control Equipment

The odor panel using the syringe dilution technique has been successfully used to judge the effectiveness of control equipment in eliminating industrial odor problems by monitoring stack emissions. Data is presented using this odor panel method for efficiency tests of direct-flame fume incinerators performed in a large variety of industrial process applications, including pulp and paper mills, rubber processing plants, food processing plants, wire enameling plants, glass fiber manufacturing plants, paint bake ovens, brake manufacturing plants, caster manufacturing plants, rendering plants, and chemical plants. Test data shows that this method of measuring odor using the syringe dilution technique is a useful and practical tool in analyzing odor problems and determining the effectiveness of control equipment by monitoring stack emissions.     

苏州市生活垃圾两种处置方法的生命周期影响评价

采用生命周期评价的方法,比较了苏州市垃圾填埋和垃圾焚烧2种处置方法对环境的影响。研究的系统范围主要包括垃圾收集、垃圾运输、垃圾填埋或焚烧以及发电等几个部分。采用收集的垃圾组分数据,利用IPCC推荐的模型等,计算了垃圾填埋和垃圾焚烧时CO₂等气体污染物的排放量。根据对垃圾渗滤液的实测数据,计算了水污染物的排放量。环境影响评价采用日本开发的AIST-LCA Ver4计算机软件进行。计算结果表明：垃圾填埋的生态币值要大得多,可见垃圾焚烧对环境的影响比垃圾填埋的影响要小。所获得的结论较为客观地反映了对环境的影响,可以作为中国城市垃圾处置决策的参考依据。     

Systematic Evaluation and Uncertainty Analysis of the Refuse-Derived Fuel Process in Taiwan

ABSTRACT

In the last few years, Taiwan has set a bold agenda in solid waste recycling and incineration programs. Not only were the recycling activities and incineration projects promoted by government agencies, but the related laws and regulations were continuously promulgated by the Legislative Yen. The solid waste presorting process that is to be considered prior to the existing incineration facilities has received wide attention. This paper illustrates a thorough evaluation for the first refuse-derived fuel pilot process from both quantitative and qualitative aspects. The process is to be installed and integrated with a large-scale municipal incinerator. This pilot process, developed by an engineering firm in Tainan County, consists of standard unit operations of shredding, magnetic separation, trommel screening, and air classification. A series of sampling and analyses were initialized in order to characterize its potentials in the solid waste management system. The probabilistic modeling for various types o f waste pro perties derived in this analysis may provide a basic understanding of system reliability.     

城市垃圾预处理改善焚烧特性的探讨

针对目前我国城市垃圾的高水分、低热值的特性,提出了2种改善城市垃圾焚烧特性的有效措施:生物质垃圾源分类和生物干燥.在我国建立生物质垃圾源分类体系,将生物质垃圾源头分类后,剩余垃圾的热值可以提高约50%～120%,已适合直接入炉焚烧,同时分离出来的生物质垃圾也更易于好氧堆肥或厌氧消化.另外一项技术措施是在焚烧前利用生物干燥技术,降低城市垃圾的水分含量,提高入炉垃圾的热值,这种方法主要是利用生物反应热来干燥城市生活垃圾,只需要在垃圾投入焚烧炉前增加一个预处理步骤,不必改变目前的垃圾收运体系,而且进行生物干燥后的垃圾更易于分选其中的可回收物质.     

回转炉床式焚烧炉计算机实时监测系统的研究

将计算机实时监测和控制技术引入到城市垃圾焚烧设备中，对回转炉床式焚烧炉的整个流程中各环节的生产数据，进行实时监测及控制，以提高焚烧炉的焚烧量和焚烧质量，使焚烧效率最佳，并且保证系统的安全可靠运行。     

我国垃圾焚烧处理现状及其发展

本文对我国垃圾焚烧处理的现状和发展趋势进行了综述。垃圾焚烧处理符合资源化、减量化和无害化的原则,由于经济技术水平的限制,我国城市垃圾的处理主要是以填埋和堆肥为主,焚烧法处理占的比例较少,随着经济技术水平的提高,焚烧处理垃圾将得到迅速的发展。我国垃圾焚烧处理的发展应积极的引进、吸收、消化国外的先进技术,开发生产适合我国国情的垃圾焚烧设备;加强法规建设,实现垃圾焚烧处理的规范化管理;开发废气净化设备及其二次污染控制设备;确保焚烧废气达标排放;有效的对垃圾焚烧排放污染物的监控,保证垃圾焚烧处理设施安全、高效的运行。     

Incinerating volatile organic compounds with ferrospinel catalyst MnFe2O4: an example with isopropyl alcohol

This paper concerns the incineration of isopropyl alcohol (IPA) using the ferrospinel catalyst MnFe2O4. It covers the preparation of the ferrospinel catalyst, the screening of catalytic activity, catalytic incineration testing, and 72-hr decay testing of the catalyst. The experimental results of catalyst screening reveal that the Mn/Fe catalyst is the best of five prepared catalysts (chromium/iron [Cr/Fe], manganese/iron [Mn/Fe], zinc/iron [Zn/Fe], nickel/iron [Ni/Fe], and pure magnetite [Fe3O4]). In tests of the catalytic incineration system used to convert IPA, 98% conversion was obtained at a space velocity of 24,000 hr(-1), an oxygen (O2) content of 21%, 1700 ppm of IPA, and a reaction temperature of 200 degrees C.     

Applying waste management scenarios in the Peloponnese region in Greece: a critical analysis in the frame of life cycle assessment

The aim of this paper is to apply life cycle assessment in the waste management sector, in order to compare the environmental performance of different waste management methods. The methods that are studied are: landfilling, aerobic and anaerobic biological treatment, incineration and recycling, focusing on mass and energy balances and the environmental performance of each applied scenario. The Peloponnese Region in Greece was selected as a case for the application of this methodology and more specifically its largest municipalities, where a significant amount of waste is presented. The conducted LCA study proves the necessity of the adoption of an integrated waste management system and indicates its principal objectives by measuring environmental impacts. Thermal scenario contributes significant to the mitigation on the Greenhouse Gases. On the other hand, separation at source and recycling practices provides significant benefits to the abiotic depletion impact.     

Air Pollution Abatement Facilities at Soybean Processing Plants

Soybean processing plants are typical of facilities in which solvent extraction is the major unit operation employed. Hexane solvent is used to treat soybeans, producing both a vegetable oil and a residue meal product. The hexane solvent is separated from the oil and the meal, recycled and used again in a closed loop fashion. At several points in the process vent streams are produced resulting in the atmospheric discharge of hexane vapor. This represents an air pollution problem and facilities are required to eliminate the problem. An economic analysis of pollution abatement requirements for soybean plants indicates that thermal incineration is the optimum system that can be used. However, at high levels of hexane content in the vent streams, a combination of activated carbon adsorption of the smaller stream plus thermal incineration of the larger stream should prove the most desirable form of pollution abatement. The analysis given in this report can be used to determine which pollution abatement system should be used, depending upon the hexane content of the vent streams.     

Curbing dioxin emissions from municipal solid waste incineration in China: Re-thinking about management policies and practices

As one of the countries with large amounts of dioxin releases, the control of dioxins is a major challenge for China. Municipal solid waste (MSW) incineration should be considered a high priority source of dioxin emissions because it is playing an increasingly more important role in waste management. MSW incineration in China has much higher emission rates of dioxins than in the developed countries, partially resulting from the gaps in the technologies of incineration and flue gas cleaning. Moreover, the current management policies and practices also contribute significantly to the problem. We recommend lowering dioxin emission standard, strengthening fly ash management, and improving regulation enforcement to reduce dioxin releases into the environment from MSW incineration. We also propose that alternative strategies should be considered on dioxin control and call for an expansion of economic instruments in waste management to reduce waste generation and thus the need for incineration.     

Catalytic oxidation of organic compounds in incineration flue gas by a commercial palladium catalyst

The object of this study is to investigate the effect of different operation conditions on the catalytic oxidation of trace organic compounds [i.e., benzene, toluene, ethylbenzene, and xylene (BTEX); and polyaromatic hydrocarbons (PAHs)] in incineration flue gas. A commercial Pd-based honeycomb catalyst, which is applied to treat flue gas with low organic concentrations and high gas velocity, is employed in this study. The investigated parameters include (1) effect of different space velocities, (2) effect of heavy metals, (3) effect of acid gas, and (4) effect of water vapor and ash particles. In this work, an effective catalyst oxidation system is constructed and expected to purify the incineration flue gas. Catalyst oxidation is a potential purification system that will meet the stricter regulations on the emissions of incineration systems. Experimental results showed that the destruction efficiency of PAHs and BTEX in Pd catalyst was generally greater than 80%. Decreasing the space velocity increased the decomposition efficiency of organic compounds. When the feedstock contained the heavy metals Pb and Cr, the oxidation of organic compounds was not inhibited. But the presence of Cd significantly decreased the oxidation efficiency. The acid gases SO2 and HCl in the flue gas could have influenced the crystal structure of PdO and subsequently deactivated/poisoned the Pd catalyst. The effect of water vapor on the catalytic destruction of PAHs and BTEX was not obvious.     

A Study of Catalyst Support Systems for Fume-Abatement of Hydrocarbon Solvents

In a stainless steel pilot plant system, operating with combined thermal incineration and catalytic oxidation, studies have been made of the influence of catalyst-support geometry on abatement efficiency. Catalyst supports tested were ceramic spherical pellets, metal foils, and ceramic honeycomb structures, all with precious metal catalyst. Data obtained cover a range of space velocities from 30,000 to 175,000 scf/hr— cu ft bed and a range of catalytic reactor temperatures from 150 to 450°C. Results show that optimum fume-abatement performance is obtained by combining incineration and catalytic oxidation and that catalyst support geometry has a significant effect on performance.