California Statewide Assessment of the Effects of Ozone on Crop Productivity

Six properties appear desirable for any set of ozone attainment criteria: (1) sufficient stringency to protect public health, (2) simplicity and understandability, (3) sensitivity to real changes in air quality, (4) stability against meteorological fluctuations, (5) use of as much data as possible, and (6) equivalence between the stringency the criteria appear to mandate, and what they actually mandate. We consider how the federal attainment criteria might be improved with respect to Properties 4 through 6 while being equally strong on 1 through 3. Whether the federal standard meets Property 1 has been the subject of debate, but our analysis would apply also to a modified standard. We show that there are subtleties in how improvements might be made. In particular, basing the attainment status on a statistic with low variance may not lead to a more stable criterion, and although it is easy to find a criterion that makes it hard for a district with bad air to reach attainment, or a district with good air to get out of attainment, it is hard to find a criterion that does both. This suggests using different criteria for districts that are out of attainment from districts that are in attainment. Initially the burden of proof would be on the district to prove that its air is of attainment quality. However, once the district has achieved attainment the burden of proof would shift; the district would remain in attainment unless there was strong evidence to the contrary. An evaluation of a set of criteria based on this idea showed improvements over the federal criteria with respect to the last three desirable properties-stability, use of data, and equivalent stringency-with some sacrifice in simplicity and sensitivity.     

工业点源大气污染扩散空间信息系统

开发了一个基于高斯扩散的大气污染扩散空间信息系统,用于模拟工业点源污染对区域大气质量的影响。该工业点源污染模型包括工业点源数据库、扩散参数、气象条件和大气质量评价4个主要数据库。用该模型计算上海市主要工业区的SO2排放,结果表明,该模型为模拟SO2污染扩散提供了一个有效便捷的方法。     

区域污染物总量控制动态化管理技术应用研究

在对近十年江苏省扬州市社会经济环境方面几十个指标上万个数据进行科学分析的基础上,揭示出区域污染物总量控制与社会、经济、环境建设和发展相关联性,总量控制具有宏观性.区域污染物总量可纳入各级政府和相关部门行政首长政绩考核中.首次建立区域污染物总量控制考核指标体系水平等级的评定模式和动态管理的应用技术.该成果不仅为城乡可持续发展奠定了基础,也为区域实现污染物总量控制动态化、规范化管理提供技术支撑和启示.     

Environmental research on potential pesticides: indispensability and scope under conditions of Poland

In consideration of the ubiquitous presence of pesticides in the environment, research should be done for each new compound aimed at evaluation of the hazard resulting from its application. Environmental investigations conducted in Poland encompass research on: (a) abiotic transformations (hydrolysis, photodegradation), (b) metabolism in plants and animals, as well as the fate in aquatic and soil environments; (c) influence on biota (including microflora, honey-bee and other beneficial arthropoda, aquatic organisms, birds); (d) side effects (bioaccumulation, resistance, subsequent action of sublethal amounts on populations); (e) mechanisms of action; (f) biological survey of sewage. The data obtained make possible an evaluation of risk connected with application of the investigated compound.     

层次分析法与地理信息系统在农田土壤重金属污染评价中的应用

以《土壤环境质量标准》(GB 15618—1995)二级标准作为评价标准,采用以改进层次分析法确定权重的加权平均法对南京市郊典型蔬菜地的土壤重金属污染状况进行了评价。结果表明,研究区土壤中Cu、Pb、Cr的单因子污染指数平均值均小于1,含量超标率均不超过10.32%,而Cd的单因子污染指数平均值达2.15,含量超标率为84.13%,急需对该区土壤和受体做进一步的Cd污染深入调查或风险评估;研究区土壤重金属综合污染指数平均值为1.28,属玷污水平;利用ArcGIS 8.3软件进行土壤重金属污染的空间分布特征分析结果表明,研究区各元素的污染程度为Cd>Pb>Cu>Cr,各元素的污染格局较为相似,城市化活动对土壤污染贡献较大;研究区有81.16%的土壤重金属污染级别为玷污,3.78%处于本底级,15.06%处于安全级。     

High Volume Sampling:Evaluation of an Inverted Sampler for Ambient TSP Measurements

Recent advances in the development of receptor-oriented source apportionment techniques (models) have provided a new approach to evaluating the performance of particulate dispersion models. Rather than limiting performance evaluations to comparisons of particulate mass, receptor model estimates of source impacts can be used to open new opportunities for in-depth analysis of dispersion model performance. Recent experiences in the joint application of receptor and dispersion models have proven valuable in developing increased confidence in source impact projections used for control strategy development. Airshed studies that have followed this approach have identified major errors in emission inventory data bases and provided technical support for modeling assumptions.

This paper focuses on the joint application of dispersion and receptor models to particulate source impact analysis and dispersion model performance and evaluation. The limitations and advantages of each form of modeling are reviewed and case studies are examined. The paper is offered to provide several new perspectives into the model evaluation process in the hope that they may prove useful to those that manage our nation’s air resources.     

炭法烟气脱硫技术现状与趋势

介绍了炭法烟气脱硫在脱硫剂、脱硫工艺和设备等方面的应用现状和研究进展 ,分析了制约炭法烟气脱硫技术发展的原因 ,并提出 :开发新材料、新工艺 ,变传统的炭吸附法脱硫技术为炭催化法脱硫技术是炭法脱硫技术的发展方向     

A new metric space incorporating radon-222 for generation of back trajectory clusters in atmospheric pollution studies

A novel metric space for the clustering of back trajectories to be used in fine particle aerosol data analysis was proposed and evaluated. The metric is based on spatial and non-spatial variables incorporating great-circle distance, altitude and radon-222.Its performance was examined using the intra-cluster variation of measured and fingerprint apportioned aerosol mass as the quantitative criterion. The new metric was demonstrated to perform better than those based on great-circle distance, or a great-circle distance and altitude alone. The same criterion was applied to investigate the clustering performance as a function of the length of its back trajectories. The optimum back trajectory length was found to be dependent on the pollution source being considered.Performance tests, as well as the application of the new metric space to re-analysis of previously published results, were based on a three year long dataset comprising co-located aerosol fine particles (PM_2.5) collection and hourly measurements of radon-222 concentration.The new metric space can easily be redefined to include other trace species.     

非定态SO2制酸工艺在铅精矿烧结烟气治理中的应用

介绍了非定态SO2制酸工艺的特点、流程及其在铅精矿烧结烟气治理中的应用效果.该工艺具有良好的社会效益、环境效益和较好的经济效益,具有较高的推广应用价值.     

微絮凝-微滤用于印染废水回用反渗透预处理的试验研究

采用微絮凝过滤-微滤作为反渗透的预处理工艺,用于印染废水二级生化出水回用深度处理.试验考察了预处理效果、工艺参数和反渗透系统运行情况,分析了膜污染的类型及特点.试验结果表明,微絮凝过滤-微滤作为反渗透的预处理工艺,系统运行稳定,相对于超滤-反渗透的"双膜法"工艺,投资和运行费用相对较低,有推广应用价值.     

Treatment of wastewater by electrocoagulation: a review

The electrocoagulation (EC) process is an electrochemical means of introducing coagulants and removing suspended solids, colloidal material, and metals, as well as other dissolved solids from water and wastewaters. The EC process has been successfully employed in removing pollutants, pesticides, and radionuclides. This process also removes harmful microorganisms. More often during EC operation, direct current is applied and electrode plates are sacrificed (dissolved into solution). The dissolution causes an increased metal concentration in the solution that finally precipitates as oxide precipitates. Due to improved process design and material of construction, the EC process is being widely accepted over other physicochemical processes. Presently, this process has gained attention due to its ability to treat large volume and for its low cost. The aim of this study is to review the mechanism, affecting factors, process, and application of the electrocoagulation process.     

持久性有机污染物分析和处理技术研究进展

阐述了持久性有机污染物 (POPs)的特性、POPs对人体健康和生态环境的危害及其判定基准 ,综述了其分析和研究方法及治理技术 ,归纳了POPs的研究内容。     

膜生物反应器处理微污染水源水的研究与应用现状

膜生物反应器及其组合工艺能实现水源水中微污染物的有效去除,是一种新型高效水处理工艺.总结了膜生物反应器处理微污染水源水的研究与应用现状、污染物去除效果和机制;在分析膜污染机制基础上归纳了膜污染控制和污染膜清洗方式,展望了膜生物反应器在给水领域应用需克服解决的技术难点.     

Analysis and comparison of inertinite-derived adsorbent with conventional adsorbents

To increase U.S. petroleum energy-independence, the University of Texas at Arlington (UT Arlington) has developed a coal liquefaction process that uses a hydrogenated solvent and a proprietary catalyst to convert lignite coal to crude oil. This paper reports on part of the environmental evaluation of the liquefaction process: the evaluation of the solid residual from liquefying the coal, called inertinite, as a potential adsorbent for air and water purification. Inertinite samples derived from Arkansas and Texas lignite coals were used as test samples. In the activated carbon creation process, inertinite samples were heated in a tube furnace (Lindberg, Type 55035, Arlington, UT) at temperatures ranging between 300 and 850 degrees C for time spans of 60, 90, and 120 min, using steam and carbon dioxide as oxidizing gases. Activated inertinite samples were then characterized by ultra-high-purity nitrogen adsorption isotherms at 77 K using a high-speed surface area and pore size analyzer (Quantachrome, Nova 2200e, Kingsville, TX). Surface area and total pore volume were determined using the Brunauer Emmet, and Teller method, for the inertinite samples, as well as for four commercially available activated carbons (gas-phase adsorbents Calgon Fluepac-B and BPL 4 x 6; liquid-phase adsorbents Filtrasorb 200 and Carbsorb 30). In addition, adsorption isotherms were developed for inertinite and the two commercially available gas-phase carbons, using methyl ethyl ketone (MEK) as an example compound. Adsorption capacity was measured gravimetrically with a symmetric vapor sorption analyzer (VTI, Inc., Model SGA-100, Kingsville, TX). Also, liquid-phase adsorption experiments were conducted using methyl orange as an example organic compound. The study showed that using inertinite from coal can be beneficially reused as an adsorbent for air or water pollution control, although its surface area and adsorption capacity are not as high as those for commercially available activated carbons. Implications: The United States currently imports two-thirds of its crude oil, leaving its transportation system especially vulnerable to disruptions in international crude supplies. UT Arlington has developed a liquefaction process that converts coal, abundant in the United States, to crude oil. This work demonstrated that the undissolvable solid coal residual from the liquefaction process, called inertinite, can be converted to an activated carbon adsorbent. Although its surface area and adsorption capacity are not as high as those for commercially available carbons, the inertinite source material would be available at no cost, and its beneficial reuse would avoid the need for disposal.     

非均匀电动力学修复技术对土壤性质的影响

非均匀电动力学技术是正在发展中的环境修复技术 ,其特点之一是不破坏原有的环境系统。通过小型实验研究了非均匀电动力学及其运行方式对土壤性质的影响 ,分析了非均匀电动力学的作用机理和影响因素 ,同时研究了非均匀电动力学系统的能耗和运行特征。实验结果表明 ,采用合适的运行方式和运行参数 ,可以最大限度地保护土壤原有的特征 ,降低能量消耗 ,具有潜在的应用前景。     

土壤治理中的胶态气泡悬浮液清洗技术

对国外胶态微气泡悬浮液 (CGAs)清洗土壤技术的研究进展进行简述。介绍了CGAs清洗土壤的原理、制备方法及研究应用状况。     

基于层次分析法的电解锰废水处理技术评价

基于电解锰废水处理技术现状,采用层次分析法建立了一个4层10指标3方案的技术评价体系,从环境效益、经济效益、技术性能3个方面,对3种电解锰废水处理技术进行分析。采用专家评分的方法,根据各指标的权重,对3种技术进行评分。结果表明,电解锰废水全过程控制技术由于低廉的运行成本,较易运行,较高的锰、铬、氨氮去除率和回收率等优点使其总评分高于其他2种技术,是电解锰废水处理技术的首选。     

Rethinking the ozone standard

Six properties appear desirable for any set of ozone attainment criteria: (1) sufficient stringency to protect public health, (2) simplicity and understandability, (3) sensitivity to real changes in air quality, (4) stability against meteorological fluctuations, (5) use of as much data as possible, and (6) equivalence between the stringency the criteria appear to mandate, and what they actually mandate. We consider how the federal attainment criteria might be improved with respect to Properties 4 through 6 while being equally strong on 1 through 3. Whether the federal standard meets Property 1 has been the subject of debate, but our analysis would apply also to a modified standard. We show that there are subtleties in how improvements might be made. In particular, basing the attainment status on a statistic with low variance may not lead to a more stable criterion, and although it is easy to find a criterion that makes it hard for a district with bad air to reach attainment, or a district with good air to get out of attainment, it is hard to find a criterion that does both. This suggests using different criteria for districts that are out of attainment from districts that are in attainment. Initially the burden of proof would be on the district to prove that its air is of attainment quality. However, once the district has achieved attainment the burden of proof would shift; the district would remain in attainment unless there was strong evidence to the contrary.(ABSTRACT TRUNCATED AT 250 WORDS)     

80TH APCA Annual Meeting & Exhibition June 21-26, 1987

To increase U.S. petroleum energy-independence, the University of Texas at Arlington (UT Arlington) has developed a coal liquefaction process that uses a hydrogenated solvent and a proprietary catalyst to convert lignite coal to crude oil. This paper reports on part of the environmental evaluation of the liquefaction process: the evaluation of the solid residual from liquefying the coal, called inertinite, as a potential adsorbent for air and water purification. Inertinite samples derived from Arkansas and Texas lignite coals were used as test samples.

In the activated carbon creation process, inertinite samples were heated in a tube furnace (Lindberg, Type 55035, Arlington, UT) at temperatures ranging between 300 and 850 °C for time spans of 60, 90, and 120 min, using steam and carbon dioxide as oxidizing gases. Activated inertinite samples were then characterized by ultra-high-purity nitrogen adsorption isotherms at 77 K using a high-speed surface area and pore size analyzer (Quantachrome, Nova 2200e, Kingsville, TX). Surface area and total pore volume were determined using the Brunauer, Emmet, and Teller method, for the inertinite samples, as well as for four commercially available activated carbons (gas-phase adsorbents Calgon Fluepac-B and BPL 4?×?6; liquid-phase adsorbents Filtrasorb 200 and Carbsorb 30). In addition, adsorption isotherms were developed for inertinite and the two commercially available gas-phase carbons, using methyl ethyl ketone (MEK) as an example compound. Adsorption capacity was measured gravimetrically with a symmetric vapor sorption analyzer (VTI, Inc., Model SGA-100, Kingsville, TX). Also, liquid-phase adsorption experiments were conducted using methyl orange as an example organic compound. The study showed that using inertinite from coal can be beneficially reused as an adsorbent for air or water pollution control, although its surface area and adsorption capacity are not as high as those for commercially available activated carbons.

Implications: The United States currently imports two-thirds of its crude oil, leaving its transportation system especially vulnerable to disruptions in international crude supplies. UT Arlington has developed a liquefaction process that converts coal, abundant in the United States, to crude oil. This work demonstrated that the undissolvable solid coal residual from the liquefaction process, called inertinite, can be converted to an activated carbon adsorbent. Although its surface area and adsorption capacity are not as high as those for commercially available carbons, the inertinite source material would be available at no cost, and its beneficial reuse would avoid the need for disposal.     

Carbon dioxide mineralization process design and evaluation: concepts,case studies,and considerations

Numerous carbon dioxide mineralization (CM) processes have been proposed to overcome the slow rate of natural weathering of silicate minerals. Ten of these proposals are mentioned in this article. The proposals are described in terms of the four major areas relating to CM process design: pre-treatment, purification, carbonation, and reagent recycling operations. Any known specifics based on probable or representative operating and reaction conditions are listed, and basic analysis of the strengths and shortcomings associated with the individual process designs are given in this article. The processes typically employ physical or chemical pseudo-catalytic methods to enhance the rate of carbon dioxide mineralization; however, both methods have its own associated advantages and problems. To examine the feasibility of a CM process, three key aspects should be included in the evaluation criteria: energy use, operational considerations as well as product value and economics. Recommendations regarding the optimal level of emphasis and implementation of measures to control these aspects are given, and these will depend very much on the desired process objectives. Ultimately, a mix-and-match approach to process design might be required to provide viable and economic proposals for CM processes.