Integrated Sampling and Analysis Methods for Determining NO x Emissions at Electric Utility Plants

Two integrated sampling and analysis methods for determining NO_x emissions in electric utility plants were developed and field tested. The collection systems consist of: a 4.0% potassium permanganate-2.0% sodium hydroxide solution in restricted-orifice impingers, and a 5A° molecular sieve in midget impingers. Sample analysis is accomplished by a colorimetric or ion-chromatographic procedure with the alkaline-permanganate method and by a colorimetric procedure with the molecular sieve method. The alkalinepermanganate method gives excellent agreement with the EPA reference method, Method 7, for NO _x measurements. The molecular sieve method shows a significant negative bias relative to Method 7. It is anticipated that the permanganate methods will be proposed as alternates to Method 7, for NO _x determinations, under the EPA New Source Performance Standards.     

Temporal trends of polyfluoroalkyl compounds (PFCs) in liver tissue of grey seals (Halichoerus grypus) from the Baltic Sea, 1974-2008

Temporal trends of polyfluoroalkyl compounds (PFCs) were examined in grey seal (Halichoerus grypus) liver from the Baltic Sea over a period of 35 years (1974-2008). In total, 17 of 43 PFCs were found, including the perfluoroalkyl sulfonates (C₄-C₁₀ PFSAs), perfluorooctanesulfinate (PFOSi), long chain perfluoroalkyl carboxylates (C₇-C₁₄ PFCAs), and perfluoroalkyl sulfonamides (i.e., perfluorooctane sulfonamide (FOSA) and N-ethyl perfluorooctane sulfonamide (EtFOSA)), whereas saturated and unsaturated fluorotelomer carboxylates, shorter chain PFCAs and perfluoroalkyl phosphonic acids were not detected. Perfluorooctane sulfonate (PFOS) was the predominant compound (9.57-1444 ng g⁻¹ wet weight (ww)), followed by perfluorononanoate (PFNA, 0.47-109 ng g⁻¹ ww). C₆-C₈ PFSAs, PFOSi and C₇-C₁₃ PFCAs showed statistically significant increasing concentrations between 1974 and 1997, with a peak in 1997 and then decreased or levelled off (except for C₁₂ and C₁₃ PFCAs). FOSA had a different temporal trend with a maximum in 1989 followed by significant decreasing concentrations until 2008. Toxicological implications for grey seals are limited, but the maximal PFOS concentration found in this study was about 40 times lower than the predicted lowest observed effect concentrations (LOEC). The statistically significant decreasing concentrations or levelling off for several PFCs in the relative closed marine ecosystem of the Baltic Sea indicate a rapidly responding to reduced emissions to the marine environment. However, the high concentrations of PFOS and continuing increasing concentrations of the longer chain PFCAs (C₁₂-C₁₄) shows that further work on the reduction of environmental emissions of PFCs are necessary.     

The conversion of chicken manure to biooil by fast pyrolysis II. Analysis of chicken manure,biooils, and char by curie-point pyrolysis-gas chromatography/mass spectrometry (Cp Py-GC/MS)

The initial chicken manure and the three fractions derived from it by fast pyrolysis, that is, the two biooils Fractions I and II as well as the residual char were analyzed by Curie-point pyrolysis-gas chromatography/mass spectrometry (Cp Py-GC/MS). The individual compounds identified were grouped into the following six compound classes: (a) N-heterocyclics; (b) substituted furans; (c) phenol and substituted phenols; (d) benzene and substituted benzenes; (e) carbocyclics; and (f) aliphatics. Of special interest were the relatively high concentrations of N-heterocyclics in biooil Fraction II which was obtained in the highest yield and had the highest calorific value. Prominent N-heterocyclics in biooil Fraction II were methyl-and ethyl-substituted pyrroles, pyridines, pyrimidine, pyrazines, and pteridine. Also noteworthy was the high abundance of aliphatics in biooil Fraction I and the char. The alkanes and alkenes in biooil Fraction I ranged from n-C₇ to n-C₁₈ and C_7:1 to C_18:1, respectively, and those in the char from n-C₇ to n-C₁₉ and C_7:1 to C_19:1, respectively. The N-heterocyclics in the two biooil Fractions came from the chicken manure, from proteinaceous materials during fast pyrolysis or were formed during the fast pyrolysis manure conversion by the Maillard reaction which involved the formation of N-heterocyclics by amino acids interacting with sugars.     

Reprint of: Temporal trends of polyfluoroalkyl compounds (PFCs) in liver tissue of grey seals (Halichoerus grypus) from the Baltic Sea, 1974-2008

Temporal trends of polyfluoroalkyl compounds (PFCs) were examined in grey seal (Halichoerus grypus) liver from the Baltic Sea over a period of 35 years (1974-2008). In total, 17 of 43 PFCs were found, including the perfluoroalkyl sulfonates (C₄-C₁₀ PFSAs), perfluorooctanesulfinate (PFOSi), long chain perfluoroalkyl carboxylates (C₇-C₁₄ PFCAs), and perfluoroalkyl sulfonamides (i.e., perfluorooctane sulfonamide (FOSA) and N-ethyl perfluorooctane sulfonamide (EtFOSA)), whereas saturated and unsaturated fluorotelomer carboxylates, shorter chain PFCAs and perfluoroalkyl phosphonic acids were not detected. Perfluorooctane sulfonate (PFOS) was the predominant compound (9.57-1444 ng g⁻¹ wet weight (ww)), followed by perfluorononanoate (PFNA, 0.47-109 ng g⁻¹ ww). C₆-C₈ PFSAs, PFOSi and C₇-C₁₃ PFCAs showed statistically significant increasing concentrations between 1974 and 1997, with a peak in 1997 and then decreased or levelled off (except for C₁₂ and C₁₃ PFCAs). FOSA had a different temporal trend with a maximum in 1989 followed by significant decreasing concentrations until 2008. Toxicological implications for grey seals are limited, but the maximal PFOS concentration found in this study was about 40 times lower than the predicted lowest observed effect concentrations (LOEC). The statistically significant decreasing concentrations or levelling off for several PFCs in the relative closed marine ecosystem of the Baltic Sea indicate a rapidly responding to reduced emissions to the marine environment. However, the high concentrations of PFOS and continuing increasing concentrations of the longer chain PFCAs (C₁₂-C₁₄) shows that further work on the reduction of environmental emissions of PFCs are necessary.     

Wet deposition of low molecular weight mono- and di-carboxylic acids,aldehydes and inorganic species in Los Angeles

About 60 rainwater samples were collected at west Los Angeles, California in 1981–1984 and were analyzed for C₁–C₉ monocarboxylic acids (0.33–79 μM, average (av.) 13±15 μM), C₂–C₁₀ dicarboxylic acids (2.9–51 μM, av. 7.5±14 μM) and C₁–C₄ aldehydes (0.85–28 μM, av. 9.2±11 μM). Distributions of monocarboxylic acids show a predominance of formic (average concentration: 6.5 μM) and acetic (av. 5.6 μM) acids followed by propionic acid (av. 0.44 μM). Oxalic acid is the dominant diacid (av. 3.9 μM) followed by succinic acid (av. 1.0 μM). Formaldehyde (av. 6.9 μM) is the dominant aldehyde, with the next most abundant, acetaldehyde, being minor (av. 0.65 μM). For select rain samples described in this paper, were found to comprise monocarboxylic acids 0.9–12.3% (av. 4.4±3.4%), diacids comprise 1.2–9.5% (av. 4.2±3.3%) and aldehydes comprise 0.2–6.2% (av. 2.1±2.2%) of total organic carbon (TOC, 2.0–18.6 mg C l⁻¹; av. 9.8±5.4 mg C l⁻¹). Annual rain fluxes of monocarboxylic acids and aldehydes during 1982–1983 were calculated to be 0.24 and 0.11 g m⁻² yr⁻¹, respectively, with an annual estimated wet deposition in the Los Angeles Basin of 3120 and 1430 tons, respectively. These fluxes are equivalent to 2500 times of the acids and 2.5 times of the aldehydes emitted from automobile exhausts in the Los Angeles air basin. This comparison suggests that major portions of the carboxylic acids detected in the rain are not directly emitted from auto-exhausts, but are most likely produced in the atmosphere by gaseous and/or aqueous phase photo-induced reactions.     

Codependencies of Reactive Air Toxic and Criteria Pollutants on Emission Reductions

Abstract

It is important to understand the effects of emission controls on concentrations of ozone, fine particulate matter (PM_2.5), and hazardous air pollutants (HAPs) simultaneously, to evaluate the full range of health, ecosystem, and economic effects. Until recently, the capability to simultaneously evaluate interrelated atmospheric pollutants (“one atmosphere” analysis) was unavailable to air quality managers. In this work, we use an air quality model to examine the potential effect of three emission reductions on concentrations of ozone, PM_2.5, and four important HAPs (formaldehyde, acetaldehyde, acrolein, and benzene) over a domain centered on Philadelphia for 12-day episodes in July and January 2001. Although NO_x controls are predicted to benefit PM_2.5 concentrations and sometimes benefit ozone, they have only a small effect on formaldehyde, slightly increase acetaldehyde and acrolein, and have no effect on benzene in the July episode. Concentrations of all pollutants except benzene increase slightly with NO_x controls in the January simulation. Volatile organic compound controls alone are found to have a small effect on ozone and PM_2.5, a less than linear effect on decreasing aldehydes, and an approximately linear effect on acrolein and benzene in summer, but a slightly larger than linear effect on aldehydes and acrolein in winter. These simulations indicate the difficulty in assessing how toxic air pollutants might respond to emission reductions aimed at decreasing criteria pollutants such as ozone and PM_2.5.     

Investigation of partitioning mechanism for volatile organic compounds in a multiphase system

Laboratory experiments were performed to investigate the partitioning behavior of a set of diverse volatile organic compounds (VOCs). After equilibration at a temperature of 25 °C, the VOC concentrations were measured by headspace method in combination with gas chromatography/mass spectrometry (GC/MS). The obtained data were used to determine the partition coefficients (K_P) of VOCs in a gas-liguid-solid system. The results have shown that the presence and nature of solid materials in the working solution control the air-water partitioning of dissolved VOCs. The air/solution partitioning of BTEX and C₉-C₁₀ aldehydes was most affected in the presence of diesel soot. K_P values decreased by a factor ranging from 1.5 for toluene to 3.0 for ethylbenzene. The addition of mineral dust in the working solution exhibited greater influence on the partitioning of short aldehydes. K_P values decreased by a factor of 1.8. The experimental partition coefficients were used to develop a predictive model for partitioning of BTEX and n-aldehydes between air, water and solid phases.     

Particulate- and vapor-phase n-alkanes in the northern Wisconsin atmosphere

n-Alkanes were present in the northern Wisconsin atmosphere in both the particulate and vapor state. Partitioning was operationally defined by a high-volume sampling methodology which used a glass fiber filter to separate particles and vapor. Concentrations, distributions and vapor/particle partitioning were seasonally dependent. Total n-alkane (C₁₁-C₃₂) concentrations in the vapor phase ranged from 25 to 75 ng m⁻³. Vapor concentrations of n-alkanes within the range C₁₁-C₁₇ were greatest during winter. Total n-alkane (C₁₁-C₃₂) concentrations in the particulate phase varied from 5.1 to 35 ng m⁻³ while those of the odd-numbered n-alkanes within the range C₂₅-C₃₁ ranged from 3.1 to 31 ng m⁻³. Highest concentrations of these n-alkanes were observed during spring and early summer. The CPI (20–32) of particulate n-alkanes was highest during spring (13.0) and early fall (8.0). The highest total n-alkane concentration and CPI (20–32) occurred in spring during a period of pine pollen disposal. A high-boiling unresolved complex mixture (UCM) was prominent in particles collected during winter, while a low-boiling UCM was typical of vapor collected during summer.     

Release of iodine in the atmospheric oxidation of alkyl iodides and the fates of iodinated alkoxy radicals

This paper describes a study of the products of the Cl-atom-initiated oxidation of three alkyl iodides, RI=CH₃I, C₂H₅I, and 2-C₃H₇I, carried out in synthetic air at atmospheric pressure and at room temperature. Fourier-transform infrared spectroscopy was used to follow the decay of reactants and subsequent formation of products. The primary step proceeds via two channels, one of which yields HCl and an iodinated alkyl radical, and the other I atoms and an alkyl chloride. Quantitative analysis of the product yields, together with an assessment of the formation of HCl in secondary processes, allowed the fractional branching into the two channels to be calculated. The channel yielding HCl from RI constitutes a fraction 0.59, 0.93, and 0.68 for R=CH₃, C₂H₅, and 2-C₃H₇. The iodinated alkyl radical forms first a peroxy, and then an alkoxy, radical in the presence of air. The final products CH₂O, CH₃CHO, and CH₃COCH₃ were observed as expected for the decomposition of these radicals with RI=CH₃I, C₂H₅I, and 2-C₃H₇I, and the fractions of the alkoxy radicals fragmenting to the carbonyl compounds were 0.88, 0.57, and 0.86, respectively. Atomic iodine is formed concomitantly with the carbonyl species, so that these fractions also indicate the yield of I atoms in the secondary process. Alternative reaction pathways for the iodinated alkoxy radicals, in particular reaction with O₂, are evaluated and discussed. The yields of I atoms in the primary and secondary steps, taken in combination with kinetic data, make it possible to estimate the contribution of the Cl-initiated oxidation of the alkyl halides to I-atom production in the atmosphere (and, making certain assumptions, the analogous contribution from OH-initiated oxidation). Radical-initiated processes might augment the photolytic yield of I atoms from simple alkyl iodides: the maximum enhancements lie between 5% (CH₃I) and more than 30% (2-C₃H₇I).     

Partitioning behaviour of perfluorinated alkyl contaminants between water, sediment and fish in the Orge River (nearby Paris, France)

This paper reports on the partitioning behaviour of 15 perfluorinated compounds (PFCs), including C₄-C₁₀ sulfonates and C₅-C₁₄ carboxylic acids, between water, sediment and fish (European chub, Leuciscus cephalus) in the Orge River (nearby Paris). Total PFC levels were 73.0 ± 3.0 ng L⁻¹ in water and 8.4 ± 0.5 ng g⁻¹ in sediment. They were in the range 43.1-4997.2 ng g⁻¹ in fish, in which PFC tissue distribution followed the order plasma > liver > gills > gonads > muscle. Sediment-water distribution coefficients (log K_d) and bioaccumulation factors (log BAF) were in the range 0.8-4.3 and 0.9-6.7, respectively. Both distribution coefficients positively correlated with perfluoroalkyl chain length. Field-based biota-sediment accumulation factors (BSAFs) are also reported, for the first time for PFCs other than perfluorooctane sulfonate. log BSAF ranged between −1.3 and 1.5 and was negatively correlated with the perfluoroalkyl chain length in the case of carboxylic acids.     

Atmospheric Chemistry of Toxic Contaminants. 3. Unsaturated Aliphatics: Acrolein,Acrylonitrile, Maleic Anhydride

Detailed mechanisms are outlined for the chemical reactions that contribute to In-situ formation and atmospheric removal of the unsaturated aliphatic contaminants acrolein, acrylonitrile, and maleic anhydride. In-situ formation of small amounts of acrolein and maleic anhydride may Involve the reaction of OH (and O₃) with 1,3-dienes and the reaction of OH with aromatic hydrocarbons, respectively. There is no known pathway for In-situ formation of acrylonitrile. Rapid removal of acrolein (half-life = less than one day) and of maleic anhydride (half-life = several hours) is expected from their rapid reactions with OH (major), O₃, and NO₃. These reactions lead to formaldehyde and glyoxal from acrolein and to dicarbonyls from maleic anhydride. Acrylonitrile is removed at a slower rate (half-life = 2–7 days) by reaction with OH, leading to formaldehyde and formyl cyanide.     

High-resolution mass spectrometry analysis of secondary organic aerosol generated by ozonolysis of isoprene

The chemical composition of secondary organic aerosol (SOA) generated from the ozonolysis of isoprene (C₅H₈) in the presence of an OH scavenger was examined using high-resolution electrospray ionization mass spectrometry (ESI-MS) in the mass range m/z = 50–1000. The chemical composition of SOA is complex, with more than 1000 assigned peaks observed in the positive and negative ion mode spectra. Only a small fraction of peaks correspond to known products of isoprene oxidation, such as pyruvic acid, glycolic acid, methylglyoxal, etc. The absolute majority of the detected peaks correspond to highly oxidized oligomeric constituents of SOA, with an average O:C molar ratio of 0.6. The corresponding organic mass (OM) to organic oxygen (OO) ratio is 2.4. Approximately 8% of oxygen atoms in SOA are in the form of peroxides, as quantified with an iodide test. Double bond equivalency (DBE) factors, representing the sum of all double bonds and rings, increase by 1 for every 1–2 additional carbon atoms in the molecule. The number of unoxidized CC double bonds is estimated to be less than 10%; the remaining DBE is due to CO carbonyl groups. Kendrick analysis suggests that the prevalent oligomer building blocks are small carbonyls with a C₁–C₂ skeleton. Formaldehyde (CH₂O) is identified as the most common repetitive building block in the observed oligomeric compounds.     

Application of Computer Controlled High Resolution Mass Spectrometry to the Analysis of Air Pollutants

An AEI-MS9 high resolution mass spectrometer interfaced with a PDP-12 digital computer has been adapted for the multicomponent analysis of air pollutants. Air sampling techniques for particulate and gaseous pollutants have been developed which are compatible with the mass spectrometric system. A single stage impactor has been designed for sampling particulate matter of particle diameters greater than 1–2 μm. The remainder of the particulate matter is collected on a glass fiber filter. Gaseous pollutants are collected on a styrene-divinylbenzene copolymer (Chromosorb 102).

The particulate samples are introduced directly into the mass spectrometer utilizing a temperature programed insertion probe. Gaseous pollutants are desorbed from the copolymer directly into the mass spectrometer by heating. Analysis of composite mass spectral data is facilitated through the use of a digital computer utilizing newly developed computer programs. Final computer output yields qualitative and quantitative results for up to 300 pollutants. Organic pollutants identified in particulate matter include polycyclic aromatic compounds, alkyl chlorides, polychlorinated aromatics, substituted benzenes and organic acids. Composite quantitative results are reported for alkanes and alkenes in the following groups: C₁₅-C₃₀, C₃₀-C₅₀ and Cso-polymeric. Inorganic pollutants identified include As₄O₆, H₂SO_4/ (NH₄)₂SO₄, (NH₄)₂SO₃, NaHSO₄, NH₄NO_3/ NaNO₃, NH₄CI, SeO₂, I₂, elemental sulfur, and elemental cadmium.     

The Role of the Computer in Air Pollution Control

The search for ways of reducing vehicular emissions has led to numerous investigations of the relationships between fuel composition and the pollutants discharged from automobiles. The most obvious fuel effects result from evaporation of gasoline components from the fuel tanks and carburetors of vehicles which lack effective mechanical devices (such as those required on all 1971 model cars) to control evaporative losses. Thus, several laboratories and cooperative study groups (Coordinating Research Council and American Petroleum Institute) have investigated the ways in which fuel properties (especially the amounts and types of C₄-C₅ hydrocarbons) influence both the amount and the potential atmospheric reactivity of evaporative emissions.^1–6 But fuel evaporation accounts for only a small portion of the total hydrocarbons emitted by automobiles, and gasoline modifications (such as volatility reductions) that reduce evaporative losses can lead to higher levels of hydrocarbons in automobile exhaust.^4–6     

Model compound synthesis for the structure determination of new unknown planar aromatic compounds originating from pulp mill

Several model compounds have been synthesized for verification of the structures of new unknown planar aromatic compounds (UPACs) observed in high-resolution gas chromatography/low-resolution mass spectrometry analyses of the polychlorodibenzodioxins (PCDDs) and polychlorodibenzofurans (PCDFs) in pulp mill products, effluents, sediments and mussels. The mass spectra of synthetic alkyl polychlorodibenzofurans (C₆-PCDFs) were different, but those of alkyl polychlorobibenzyls (C₅-PCBBs) were very similar compared to the spectra of UPACs.     

Quantitative determination of fluorochemicals in municipal landfill leachates

Twenty-four fluorochemicals were quantified in landfill leachates recovered from municipal refuse using an analytical method based on solid-phase extraction, dispersive-carbon sorbent cleanup, and liquid chromatography/tandem mass spectrometry. The method was applied to six landfill leachates from four locations in the US as well as to a leachate generated by a laboratory bioreactor containing residential refuse. All seven leachates had the common characteristic that short-chain (C₄-C₇) carboxylates or sulfonates were greater in abundance than their respective longer-chain homologs (?C₈). Perfluoroalkyl carboxylates were the most abundant (67 ± 4% on a nanomolar (nM) basis) fluorochemicals measured in leachates; concentrations of individual carboxylates reaching levels up to 2800 ng L⁻¹. Perfluoroalkyl sulfonates were the next most abundant class (22 ± 2%) on a nM basis; their abundances in each of the seven leachates derived from municipal refuse were greater for the shorter-chain homologs (C₄ and C₆) compared to longer-chain homologs (C₈ and C₁₀). Perfluorobutane sulfonate concentrations were as high as 2300 ng L⁻¹. Sulfonamide derivatives composed 8 ± 2.1% (nM basis) of the fluorochemicals in landfill leachates with methyl (C₄ and C₈) and ethyl (C₈) sulfonamide acetic acids being the most abundant. Fluorotelomer sulfonates (6:2 and 8:2) composed 2.4 ± 1.3% (nM basis) of the fluorochemicals detected and were present in all leachates.     

A Study of Ammonia Source at a Portland Cement Production Plant

A source and process sampling study was conducted at a dry process Portland Cement production plant. The study was performed to determine the nature of the formation of a highly visable plume related to the kiln emissions. One aspect of the study focused on the source or point of NH₃ within the production process. An extensive number of process solids from raw feeds to baghouse solids were collected and analyzed for NH₄ ⁺. Samples were analyzed for NH₄ ⁺ both by washing the solids with 0.1 N H₂SO₄ and by collecting NH₃ in impingers as it was evolved from heated solids. The results showed that NH₄ ⁺ was present in many process samples and that the collection efficiency of NH₄ ⁺ in the baghouse was related to baghouse temperature. The data also showed that NH₃ was derived from the shale used in the raw feed at this cement production plant.     

Careers in Air Pollution Control Plant Pathology

ABSTRACT

Profiles of the sources of nonmethane organic compounds (NMOCs) were developed for emissions from vehicles, petroleum fuels (gasoline, liquefied petroleum gas [LPG], and natural gas), a petroleum refinery, a smelter, and a cast iron factory in Cairo, Egypt. More than 100 hydrocarbons and oxygenated hydrocarbons were tentatively identified and quantified. Gasoline-vapor and whole-gasoline profiles could be distinguished from the other profiles by high concentrations of the C₅ and C₆ saturated hydrocarbons. The vehicle emission profile was similar to the whole-gasoline profile, with the exception of the unsaturated and aromatic hydrocarbons, which were present at higher concentrations in the vehicle emission profile. High levels of the C₂-C₄ saturated hydrocarbons, particularly n-butane, were characteristic features of the petroleum refinery emissions. The smelter and cast iron factory emissions were similar to the refinery emissions; however, the levels of benzene and toluene were greater in the former two sources. The LPG and natural gas emissions contained high concentrations of n-butane and ethane, respectively. The NMOC source profiles for Cairo were distinctly different from profiles for U.S. sources, indicating that NMOC source profiles are sensitive to the particular composition of petroleum fuels that are used in a location.     

Identification,abundance and origin of atmospheric organic particulate matter in a Portuguese rural area

Respirable suspended particles high-volume samples were collected from a coastal-rural site in the centre of Portugal in August 1997 and their solvent-extractable organic compounds were subjected to characterisation by gas chromatography-mass spectrometry. Particles were also analysed by a thermal/optical technique in order to determine their black and organic carbon content. The total lipid extract yields ranged from 20 to 63 μg m⁻³, containing mainly aliphatic hydrocarbons such as n-alkanes, acids, alcohols, aldehydes, ketones and polycyclic aromatic hydrocarbons. The higher input of vascular plant wax components was demonstrated by the distribution patterns of the n-alkanes, n-alkanoic acids and n-alkanols homologous series, with C_max at C₂₉, C₂₂/C₂₄ and C₃₀, respectively. The CPI values for these series were in the range 1.8–9.7, being indicative of recent biogenic input from microbial lipid residues and flora epicuticular components. Specific natural constituents (e.g. phytosterols, terpenes, etc.) were identified as molecular markers. Some oxidation products from volatile organic precursors were also present in the aerosols. In addition, all samples had a component of petroleum hydrocarbons representing urban and vehicular emissions probably transported from the nearest cities and from the motorway in the vicinity. This data set could be used to make a mass balance with organic carbon, organic extracts and elutable matter, permitting also the comparison with lipid signatures observed for other regions.     

The Inhibition of Photochemical Smog I. Inhibition by Phenol,Benzaldehyde, and Aniline

In urban atmospheres hydrocarbons promote the conversion of NO to NO₂ under the influence of sunlight, ultimately giving rise to photochemical smog. The conversion results from a long chain process with HO radicals as the chain carrier. If this chain could be interrupted by suitable radical traps, the formation of photochemical smog would be inhibited. In this paper we report the results of studies using phenol, benzaldehyde, and aniline as inhibitors. Mixtures containing 16 mTorr C₃H₆, 8 mTorr NO, ～85 Torr 0₂, and the addi tives were irradiated at 25°C. The NO₂ pressure was monitored photometrically. In the absence of additive, the NO2 pressure first increases with irradiation time reaching a maximum conversion corresponding to 70% of the NO at 1 2 minutes. As the radiation time is lengthened, the NO₂ pressure drops. With the additive present, the formation of NO₂ is delayed. The time to reach the maximum percent conversion of NO to N0₂ becomes 20, 22, 31, and 40 minutes respectively, for 13 mTorr C₆H₅OH, 2 mTorr C₆H₅CHO, 8 mTorr C₆H₅CHO, and 4.1 mTorr C₆H₅NH₂ added. The problems and possibilities of adding inhibitors to the atmosphere to control air pollution are discussed.