Air Monitoring Reflects Air Pollution Control Activity

Air monitoring by the A.I.S.I. filter sampling device which both preceded and was concurrent with source control of particulates demonstrated air quality improvement over a ten-year period. A difference in improvement from that estimated by the pollution control agency resulted from difference in the measurement parameters.     

Utilization of Air Cleaning Equipment In Exhaust Air Recirculation Systems

The energy crisis is providing an incentive for industry in the U. S. to conserve fuel. A major consideration is the recirculation of Industrial exhaust air to reduce energy consumption in heating or cooling work place air. Although there is a history of literature on the subject, design criteria for recirculation systems are very limited. Primary system components are air cleaning equipment and monitoring/alarm equipment. If feasibility of recirculation is established, air cleaning equipment must be selected to remove specific contaminants properly. Types of air cleaning equipment are reviewed from the standpoint of collection mechanism, equipment configuration, performance capability, and applicability to recirculation. Monitoring equipment requires significant development work to assist in safeguarding re-circulation systems and to provide worker protection.     

Air Pollution Acronyms

Abstract

Computational fluid dynamic (CFD) analysis of the thermal flow in the combustion chamber of a solid waste incinerator provides crucial insight into the incinerator’s performance. However, the interrelation of the gas flow with the burning waste has not been adequately treated in many CFD models. A strategy for a combined simulation of the waste combustion and the gas flow in the furnace is introduced here. When coupled with CFD, a model of the waste combustion in the bed provides the inlet conditions for the gas flow field and receives the radiative heat flux onto the bed from the furnace wall and gaseous species. An unsteady one-dimensional bed model was used for the test simulation, in which the moving bed was treated as a packed bed of homogeneous fuel particles. The simulation results show the physical processes of the waste combustion and its interaction with the gas flow for various operational parameters.     

Plants Pollute Air

A recently developed photometer utilizes near-forward scattered light to count and size aerosol particles in the diameter range 0.3-17 μ. The particles are drawn through a 1-cu mm illuminated volume without entering the body of the optical chamber. Hence, purging is almost instantaneous, and number concentrations below 1,000,000/cu ft give less than 3% coincidences. The scattered light pulse from each particle is detected by a photomultiplier tube. The resultant voltage pulses are amplified, measured by a series of ten discriminator circuits, and stored in a series of ten 5-decade electronic counters. At the end of a chosen period ranging from 1/3 to 30 min, a digital printer prints the number of particles at each diameter. At the end of the printout, the procedure automatically recycles. The instrument provides ten size classifications, each successively having a width ratio of 1.5 to 1. Greater precision is seldom practical since most aerosols contain particles of different refractive index, color, and shape, all of which affect the intensity of the scattered light. Calibration is accomplished with aerosols of uniform size such as spray-dried polystyrene and other latex suspensions, supplemented by calculations based on the Mie theory of light scattering.     

Redundant Measurements of Urban Air Monitoring Networks in Air Quality Reporting

Abstract

This paper describes a statistical method to assess site redundancy of urban air monitoring networks in reporting daily Pollutant Standards Index (PSI), average concentrations, and the number of exceedances. Such a statistical method has identified significant redundancy in monitoring sites for one-year measurements of two air monitoring networks in Taiwan. There are five redundant sites out of 15 monitoring sites in the Taipei area and eight redundant sites out of 18 monitoring sites in the Kaohsiung area. By using the statistical method presented in this paper to downsize the monitoring networks, we can determine not only the number of redundant sites but also the priority of site removals. The derived sub-networks can maintain consistency in reporting air quality without significant changes in the spatial variations of air measurements for an existing air monitoring network.     

Air Pollution Effects of Incinerator Firing Practices and Combustion Air Distribution

A survey of academic programs in air pollution control was made. Results from the 127 schools reporting are tabulated by state. Faculty involved in air pollution instruction are identified. Some conclusions and recommendations are presented.     

Growth and Clean Air

The keynote address to the 72nd annual meeting of the Air Pollution Control Association was presented by R.W. Baldwin. His remarks follow:     

Air pollution in cities

Air quality in cities is the result of a complex interaction between natural and anthropogenic environmental conditions. Air pollution in cities is a serious environmental problem – especially in the developing countries. The air pollution path of the urban atmosphere consists of emission and transmission of air pollutants resulting in the ambient air pollution. Each part of the path is influenced by different factors. Emissions from motor traffic are a very important source group throughout the world. During transmission, air pollutants are dispersed, diluted and subjected to photochemical reactions. Ambient air pollution shows temporal and spatial variability. As an example of the temporal variability of urban air pollutants caused by motor traffic, typical average annual, weekly and diurnal cycles of NO, NO₂, O₃ and O_x are presented for an official urban air-quality station in Stuttgart, southern Germany. They are supplemented by weekly and diurnal cycles of selected percentile values of NO, NO₂, and O₃. Time series of these air pollutants give information on their trends. Results are discussed with regard to air pollution conditions in other cities. Possibilities for the assessment of air pollution in cities are shown. In addition, a qualitative overview of the air quality of the world's megacities is given.     

Air Pollution Control Philosophies

Most air pollution control programs rest on one or more of the following four basic philosophies: emission standards, air quality standards, emission taxes, and cost benefit analysis. Frequently they rest on mixtures or combinations of these four. This paper examines each of the four separately, tries to show why each is different from the others, and compares their advantages and disadvantages.     

Ozone Air Quality Models

Abstract

The field of ozone air quality modeling, or as it is commonly referred to, photochemical air quality modeling, has undergone rapid change in recent years. Improvements in model components, as well as in methods of interpreting model performance, have contributed to this change. Attendant with this rapid change has been a growing need for those developing and using air quality models and policy makers to have a common understanding of the use and role of models in the decision making process. This Critical Review highlights recent advances and continuing problem areas in photochemical air quality modeling. Emphasis is placed on the components and input data for such models, model performance evaluation, and the implications for their use in regulatory decisions.     

BOP Air Cleaning Experiences

The basic oxygen process of steel manufacture evolves a large volume of gas at high temperature during the oxygen blow. This gas contains finely divided oxide particles that are removed in gas-cleaning equipment. Either electrostatic precipitators or water scrubbers are commonly used for the purpose. These devices are quite efficient but breakdowns, usually in the auxiliary equipment, are frequent. Maintenance problems arise primarily from the high temperature of the gases which warps and cracks the plates in the hood that draws the gases to the cleaning device, and from erosion of piping caused by abrasive particles moving at high velocity. This paper presents a number of case histories of BOP gas-cleaning installations, details maintenance problems, and discusses corrective measures that have been adopted. It gives reasons why merely appropriating a large sum of money for cleaning devices does not always guarantee full abatement of air pollution from the basic oxygen process.