Fugitive Dust Emission Source Profiles and Assessment of Selected Control Strategies for Particulate Matter at Gravel Processing Sites in Taiwan

Abstract

Particles emitted from gravel processing sites are one contributor to worsening air quality in Taiwan. Major pollution sources at gravel processing sites include gravel and sand piles, unpaved roads, material crushers, and bare ground. This study analyzed fugitive dust emission characteristics at each pollution source using several types of particle samplers, including total suspended particulates (TSP), suspended particulate (PM₁₀), fine suspended particulate (PM_2.5), particulate sizer, and dust-fall collectors. Furthermore, silt content and moisture in the gravel were measured to develop particulate emission factors. The results showed that TSP (<100 µm) concentrations at the boundary of gravel sites ranged from 280 to 1290 µg/m³, which clearly exceeds the Taiwan hourly air quality standard of 500 µg/m³. Moreover, PM₁₀ concentrations, ranging from 135 to 550 µg/m³, were also above the daily air quality standard of 125 µg/m³ and approximately 1.2 and 1.5 times the PM_2.5 concentrations, ranging from 105 to 470 µg/m³. The size distribution analysis reveals that mass mean diameter and geometric standard deviation ranged from 3.2 to 5.7 µm and from 2.82 to 5.51, respectively. In this study, spraying surfactant was the most effective control strategy to abate windblown dust from unpaved roads, having a control efficiency of approximately 93%, which is significantly higher than using paved road strategies with a control efficiency of approximately 45%. For paved roads, wet suppression provided the best dust control efficiencies ranging from 50 to 83%. Re-vegetation of disturbed ground had dust control efficiencies ranging from 48 to 64%.     

Respiratory uptake kinetics of neutral hydrophobic organic chemicals in a marine benthic fish, Pseudopleuronectes yokohamae

We investigated the respiratory uptake kinetics of polychlorinated biphenyls (PCBs), organohalogen pesticides (OCPs), polycyclic aromatic hydrocarbons (PAHs), and 2,2′,4,4′-tetrabrominated diphenyl ether (BDE #47) in a marine benthic fish, Pseudopleuronectes yokohamae. The respiratory uptake efficiencies (E_W) of the chemicals, of which there have been no reports for the majority of persistent organic pollutants (POPs), were obtained by measuring the respiratory uptake rate constants (k₁) and the oxygen consumption rates of fish. Fish were exposed to water in which these chemicals were dissolved at environmentally relevant concentrations for 28 d, followed by 168 d of depuration in clean seawater. The k₁ and E_W values for 99 compounds were obtained, and they ranged from 2000 to 42 000 L kg-lipid⁻¹ d⁻¹ and from 0.060 to 1.3, respectively. The E_W values of the chemicals, except for PAHs, tended to increase with increasing values of the log octanol–water partition coefficients (K_OW) of the chemicals up to a log K_OW of 5. For log K_OW in the range 3–5, the E_W values in this study were much lower than those in a published study (about one-third). As a result of analysis by a two-phase resistance model, the resistance of transport rates to the lipid phase in this study was lower than was the case in the published study. These findings indicate that the E_W predicted by the published study for log K_OW in the range 3–5 may differ among fish species and water temperature, and further study is needed.     

Development of enzyme-linked immunosorbent assays for plasma vitellogenin in Chinese rare minnow (Gobiocypris rarus)

Due to the wide occurrence of endocrine disrupting chemicals in the environment, it is much of importance to develop high throughput screening method for the analysis of this kind of pollutants. Using anion-exchange membrane chromatography, vitellogenin (VTG) from the plasma of 17β-estradiol (E₂) treated Chinese rare minnow was rapidly purified within 15 min. Both polyclonal antibody (PcAb) and monoclonal antibody (McAb) against rare minnow VTG (R-VTG) were prepared in rabbit and Balb/c mice, respectively. The competitive enzyme-linked immunosorbent assays (ELISA) based on either PcAb or McAb were developed to identify and quantify R-VTG in the plasma, and these two methods showed similar characteristics. The detection limits of both assays were lower than 3 ng mL⁻¹ with the working ranges covering three magnitudes. The recovery efficiencies of PcAb and McAb based ELISA were 104.2% and 102.6%, respectively; and the intra-assay and inter-assay of these two assays were 6.2% and 9.2%, 8.6% and 12.8%, respectively. These results indicated that the described competitive ELISA methods were sensitive and valuable tools for quantifying vitellogenin in rare minnow plasma. These methods were then applied to measure R-VTG concentrations in plasma of male fish exposed to a series of E₂ concentrations. When E₂ levels were less than 10 ng L⁻¹, R-VTG levels in plasma were comparable to that in solvent control, while R-VTG levels significantly increased 15-folds and 350-folds, respectively when E₂ exposure concentrations were controlled at 10 and 50 ng L⁻¹. The high sensitivity of Chinese rare minnow to E₂ was demonstrated, making it a valuable model species to study environmental estrogens.     

Monitoring of dust emission on gravel roads: Development of a mobile methodology and examination of horizontal diffusion

Traffic-generated fugitive dust on gravel roads impairs visibility and deposits on the adjacent environment. Particulate matter smaller than 10 μm in diameter (PM₁₀) is also associated with human health problems. Dust emission strength depends on the composition of granular material, road moisture, relative humidity, local climate (precipitation, wind velocity, etc.), and vehicle characteristics.The objectives of this study were to develop a reliable and rapid mobile methodology to measure dust concentrations on gravel roads, evaluate the precision and repeatability of the methodology and correspondence with the currently used visual assessment technique. Downwind horizontal diffusion was studied to evaluate the risk of exceeding the maximum allowed particulate matter concentration in ambient air near gravel roads according to European Council Directive [European Council Directive 1999/30/EC of 22 April 1999 relating to limit values for sulphur dioxide, nitrogen dioxide and oxides of nitrogen, particulate matter and lead in ambient air. Official Journal of the European Communities. L163/41.].A TSI DustTrak Aerosol Monitor was mounted on an estate car travelling along test sections treated with various dust suppressants. Measured PM₁₀ concentrations were compared to visual assessments performed at the same time. Airborne particles were collected in filters mounted behind the vehicle to compare the whole dust fraction with the PM₁₀ concentration. For measuring the horizontal diffusion, DustTraks were placed at various distances downwind of a dusty road section.The mobile methodology was vehicle and speed dependent but not driver dependent with pre-specified driving behaviours. A high linear correlation between PM₁₀ of different vehicles makes relative measurements of dust concentrations possible. The methodology gives continuous data series, mobility, and easy handling and provides fast, reliable and inexpensive measurements for estimating road conditions to make road maintenance more efficient.Good correlations between measured PM₁₀-values, visually assessed dust generation and dust collected in filters were obtained. PM₁₀ seems to be correlated to the whole dust fraction that impairs visibility on gravel roads.A decay in PM₁₀ concentration as a function of distance from the road was observed. Measured particles principally did not travel further than 45 m from the road. The risk of exceeding the PM₁₀ concentration stated in the EC-directive seems small.     

活性炭-微波辐照处理丁腈胶乳生产废水的研究

以活性炭-微波辐照工艺处理丁腈胶乳生产废水,考察了催化剂的种类及用量、废水初始浓度、废水初始pH值、微波辐照时间和微波功率等对废水COD去除率的影响.结果表明,采用3 g粉末活性炭处理100 mL COD浓度为3500 mg/L左右的丁腈胶乳废水,在微波辐照功率为200 W,辐照时间4 min的条件下,废水COD去除率最高可达96.6%.动力学研究表明,在最佳操作条件下的反应表观过程近似符合一级反应规律,动力学方程为In(C0/C)=0.6034t 0.9247(R=0.9926),反应速率常数k=0.6034 min-1,半衰期t1/2=1.15 min.     

Arsenic release from arsenic-bearing Fe-Mn binary oxide: effects of E(h) condition

Ferric and manganese binary oxide (FMBO) has been successfully used to remediate arsenic-polluted river, but there still lacks sufficient data to evaluate its effects on environments. The release behaviors of iron (Fe), manganese (Mn), and arsenic (As) in different E_h ranges were investigated for As-bearing FMBO sediment after remediating As-polluted DaSha River by FMBO. Under high E_h range (+550 to +400 mV), slight dissolution of Fe and Mn, which corresponded to 12.2% and 25.6%, and less than 5% of As release were observed in 336 h. Under lower E_h range (+50 to −100 mV), elevated extent of the dissolution of Mn and Fe were observed, which corresponded to as high as 61.3% and 70.1%. Under such conditions, the dissolution rate of Mn was higher than that of Fe. Furthermore, from the established relationship of As release and the dissolution of Fe and Mn, the release of As seemed dominated by the dissolution of Fe. X-ray photoelectron spectroscopy (XPS) analysis demonstrated the release of Fe, Mn, As(III), and As(V) after sodium ascorbate-treatment, and the re-adsorption of As(V), as indicated from the increased binding energy of As 3d from 44.78 to 45.83 eV. Surface element composition analysis indicated significant decrease of Mn from 3.22% to 0.54%, slight increase of Fe from 12.45% to 13.67%, and elevated ratio of As from 0.11% to 0.32% accordingly. The main reactions of Fe and Mn dissolution and the pathways of As release under different E_h ranges were also proposed.     

Effect of Cuscuta campestris parasitism on the physiological and anatomical changes in untreated and herbicide-treated sugar beet

The effects of field dodder on physiological and anatomical processes in untreated sugar beet plants and the effects of propyzamide on field dodder were examined under controlled conditions. The experiment included the following variants: N—noninfested sugar beet plants (control); I - infested sugar beet plants (untreated), and infested plants treated with propyzamide (1500 g a.i. ha^?1 (T₁) and 2000 g a.i. ha^?1(T₂)). The following parameters were checked: physiological—pigment contents (chlorophyll a, chlorophyll b, total carotenoids); anatomical -leaf parameters: thickness of epidermis, parenchyma and spongy tissue, mesophyll and underside leaf epidermis, and diameter of bundle sheath cells; petiole parameters: diameter of tracheid, petiole hydraulic conductance, xylem surface, phloem cell diameter and phloem area in sugar beet plants. A conventional paraffin wax method was used to prepare the samples for microscopy. Pigment contents were measured spectrophotometrically after methanol extraction. All parameters were measured: prior to herbicide application (0 assessment), then 7, 14, 21, 28 and 35 days after application (DAA). Field dodder was found to affect the pigment contents in untreated sugar beet plants, causing significant reductions. Conversely, reduction in the treated plants decreased 27% to 4% for chlorophyll a, from 21% to 5% for chlorophyll b, and from 28% to 5% for carotenoids (T₁). Also, in treatment T_2, reduction decreased in infested and treated plants from 19% to 2% for chlorophyll a, from 21% to 2% for chlorophyll b, from 23% to 3% for carotenoids and stimulation of 1% and 2% was observed 28 and 35 DAA, respectively. Plants infested (untreated) by field dodder had lower values of most anatomical parameters, compared to noninfested plants. The measured anatomical parameters of sugar beet leaves and petiole had significantly higher values in noninfested plants and plants treated with propyzamide than in untreated plants. Also, the results showed that propyzamide is an adequate herbicide for control of field dodder at the stage of early infestation.     

孔口分布及空气流速对充氧性能的影响

实验采用鼓风曝气,改变曝气量,研究孔口分布及空气流速对清水充氧性能的影响。通过考察氧总转移系数KLa(20)、充氧能力N0和氧转移效率E3项指标,得出该曝气设备的最佳运行条件:在曝气量为9 m3/h时,选用曝气器B进行曝气。这样可以得到较高的KLa(20)(1.816 h-1)、N0(0.105 kg/h)和E(4.151%),为曝气设备的实际应用提供参考。     

Determination of the Sodium Carbonate-Sulfur Dioxide Reaction Rate Coefficient at 450°F

Abstract

Gas-phase dispersion in granular biofilter materials with a wide range of particle sizes was investigated using atmospheric air and nitrogen as tracer gases. Two types of materials were used: (1) light extended clay aggregates (LECA), consisting of highly porous particles, and (2) gravel, consisting of solid particles. LECA is a commercial material that is used for insulation, as a soil conditioner, and as a carrier material in biofilters for air cleaning. These two materials were selected to have approximately the same particle shape. Column gas transport experiments were conducted for both materials using different mean particle diameters, different particle size ranges, and different gas flow velocities. Measured breakthrough curves were modeled using the advection-dispersion equation modified for mass transfer between mobile and immobile gas phases. The results showed that gas dispersivity increased with increasing mean particle diameter for LECA but was independent of mean particle diameter for gravel. Gas dispersivity also increased with increasing particle size range for both media. Dispersivities in LECA were generally higher than for gravel. The mobile gas content in both materials increased with increasing gas flow velocity but it did not show any strong dependency on mean particle diameter or particle size range. The relative fraction of mobile gas compared with total porosity was highest for gravel and lowest for LECA likely because of its high internal porosity.     

Treatment of tannery wastewater in a pilot-scale hybrid constructed wetland system in Bangladesh

This paper reports the pollutant removal performances of a hybrid wetland system in Bangladesh for the treatment of a tannery wastewater. The system consisted of three treatment stages: a subsurface vertical flow (VF) wetland, followed by a horizontal flow (HF) and a VF wetland. The wetlands were planted with common reed (Phragmites australis), but employed different media, including organic coco-peat, cupola slag and pea gravel. In the first stage, experimental results demonstrated significant removal of ammonia (52%), nitrate (54%), BOD (78%), and COD (56%) under high organics loading rate (690 g COD m⁻² d⁻¹); simultaneous nitrification, denitrification, and organics degradation were attributed to the unique characteristics of the coco-peat media, which allowed greater atmospheric oxygen transfer for nitrification and organic degradation, and supply of organic carbon for denitrification. The second stage HF wetland produced an average PO₄ removal of 61%, primarily due to adsorption by the iron-rich cupola slag media. In the third treatment stage, which was filled with gravel media, further BOD removal (78%) from the tannery wastewater depleted organic carbon, causing the accumulation of NO₃ in the wastewater. Overall, the average percentage removals of NH₃-N, NO₃-N, BOD, COD, and PO₄ were 86%, 50%, 98%, 98% and 87%, respectively, across the whole hybrid system. The results provided a strong evidence to support widespread research and application of the constructed wetland as a low-cost, energy-efficient, wastewater treatment technology in Bangladesh.     

Regenerative Thermal Oxidation of Airborne N,N-Dimethylformamide and Its Associated Nitrogen Oxides Formation Characteristics

Abstract

In this study, a two-bed electrically heated regenerative thermal oxidizer (RTO) was used to test the thermal destruction and oxides of nitrogen (NO_x) formation characteristics in burning airstreams that contain either N, N-dimethylformamide or dimethylformamide (DMF) mixed with methyl ethyl ketone (MEK). The RTO contained two 0.152 m × 0.14 m × 1 m (L × W times] H) beds, both packed with gravel particles with an average diameter of approximately 0.0111 m and a height of up to 1 m with a void fraction of 0.42 in the packed section. The thermal recovery efficiency (TRE) and the gas pressure drop over the beds were also studied. Experimental results reveal that, with a valve shifting time (t _s) of 1.5 min, a superficial gas velocity (U _g) of 0.39 m/sec (evaluated at an influent air temperature of around 30 °C) and preset maximum destruction temperatures (T _S) of 750–950 °C, no NO_x was present in the effluent gas from the RTO when it was loaded with DMF-free air. When only DMF was present in the influent air, the average destruction efficiencies exceeded 96%, and increased with the influent DMF concentration from 300 to 750 mg/N?m³. The “NO_x-N formation/DMF-N destruction” mass ratios were in the range 0.76–1.05, and decreased as the influent DMF concentration increased within the experimental range. When both DMF and MEK were present in the influent gas, the NO_x formation ratio was almost the same and the DMF destruction efficiency increased with the influent MEK/DMF ratio from 150/300 to 4500/300 (mg/mg) and in the preset temperature range. The NO_x formation ratios were in the range 0.75–0.96. The TRE decreased as U _g increased but was invariant with T _s. The Ergun equation was found to suffice in the estimation of the pressure drop when the gas flowed over the packing beds.     

孔径对微孔曝气充氧性能的影响

孔径是微孔曝气产品最重要的参数之一,研究孔径对微孔曝气氧传质的影响对于提高微孔曝气器充氧性能有重要意义。本研究在1.5 m水深条件下对不同大小孔径的钟罩型塑料微孔曝气器充氧性能进行评价。结果发现,在实验条件下,微孔曝气器的阻力损失RL、标准氧总转移系数KLas、标准氧转移速率SOTR,标准氧转移效率SOTE及理论动力效率E随孔径增大而显著减小。     

Drop size-dependent chemical composition of clouds and fogs. Part II: Relevance to interpreting the aerosol/trace gas/fog system

Size-resolved fog drop chemical composition measurements were obtained during a radiation fog campaign near Davis, California in December 1998/January 1999 (reported in Reilly et al., Atmos. Environ. 35(33) (2001) 5717; Moore et al., Atmos. Environ. this issue). Here we explore how knowledge of this size-dependent drop composition—particularly from the newly developed Colorado State University 5-Stage cloud water collector—helps to explain additional observations in the fog environment. Size-resolved aerosol measurements before and after fog events indicate relative depletion of large (>2 μm in diameter) particles during fog accompanied by a relative increase in smaller aerosol particle concentrations. Fog equivalent air concentrations suggest that entrainment of additional particles and in-fog sedimentation contributed to observed changes in the aerosol size distribution. Calculated deposition velocities indicate that sedimentation was an important atmospheric removal mechanism for some species. For example, nitrite typically has a larger net deposition velocity than water and its mass is found preferentially in the largest drops most likely to sediment rapidly. Gas–liquid equilibria in fog for NO₃⁻/HNO₃, NH₄⁺/NH₃, and NO₂⁻/HONO were examined. While these systems appear to be close to equilibrium or relative equilibrium during many time periods, divergences are observed, particularly for low liquid water content (<0.1 g m⁻³) fogs and in different drop sizes. Knowledge of the drop size-dependent composition provided additional data useful to the interpretation of these deviations. The results suggest that data from multi-stage cloud water collectors are useful to understanding fog processes as many depend upon drop size.     

微型舱模拟室内环境中活性炭净化甲醛的能力

利用微型实验舱(0.04 m3)模拟室内甲醛环境进行活性炭吸附实验,研究吸附后甲醛浓度随时间的变化趋势,计算活性炭对甲醛的净化效率、吸附速率和饱和吸附量,探索活性炭对室内甲醛的吸附规律.研究发现,当甲醛含量为0 ～0.40 mg,活性炭用量为0.5g时,舱内甲醛浓度随时间延长呈指数递减变化趋势,吸附后0～0.5 h甲醛浓度递减得最快,0.5～2h递减速度变缓,2～4h甲醛浓度基本上保持不变;研究E0A1、E1A4曲线斜率K及活性炭甲醛净化效率发现,每次吸附过程活性炭吸附2h可达到吸附平衡,活性炭进行3次吸附平衡即可达到吸附饱和,每次实验第一次吸附过程、每次吸附过程前半小时活性炭对甲醛的吸附能力最强;活性炭的吸附速率在吸附初期迅速降低,最后趋近于0;等量椰壳活性炭在一定浓度的污染物环境中饱和吸附量是个定值.说明使用活性炭净化室内甲醛有一定的规律可循.     

Associations between maternal phthalate exposure and cord sex hormones in human infants

It has been speculated that maternal phthalate exposure may affect reproductive development in human newborns. However, the mechanism awaits further investigation. The aim is to evaluate the association between maternal phthalate exposure and cord sex steroid hormones in pregnant women and their newborns from the general population. A total of 155 maternal and infant pair were recruited and analyzed. Levels of urinary phthalate metabolites and sex steroid hormones were determined using liquid chromatography/electrospray tandem mass spectrometry (LC-ESI-MS/MS) and radioimmunoassay (RIA), respectively. No significant correlation was found between each steroid hormones and phthalate metabolites for male newborns, except MMP was marginally significantly correlated with E₂. After adjusting for maternal age, estradiol (E₂) levels in cord serum from male newborns were not correlated with maternal urinary phthalate metabolites. In female newborns, the maternal urinary levels of mono-(2-ethylhexyl) phthalate (MEHP) and mono-(2-ethyl-5-hydroxyhexyl) phthalate (5OH-MEHP) were negatively correlated with the free testosterone (fT) and fT/E₂ levels in cord serum with Pearson correlation coefficients ranging between −0.24 and −0.29 (p < 0.05). Additionally, after gestational age was adjusted, the maternal urinary level of DEHP was negatively correlated with the free testosterone (fT) and fT/E₂ levels in cord serum. We suggest that maternal exposure to phthalates may affect sex steroid hormones status in fetal and newborn stage.     

Effectiveness evaluation of glyphosate oxidation employing the H2O2/UVC process: Toxicity assays with Vibrio fischeri and Rhinella arenarum tadpoles

The H₂O₂/UVC process was applied to the photodegradation of a commercial formulation of glyphosate in water. Two organisms (Vibrio fischeri bacteria and Rhinella arenarum tadpoles) were used to investigate the toxicity of glyphosate in samples M_1, M₂, and M₃ following different photodegradation reaction times (120, 240 and 360 min, respectively) that had differing amounts of residual H₂O₂. Subsamples of M₁, M₂, and M₃ were then used to create samples M_1,E, M_2,E and M_3,E in which the H₂O₂ had been removed. Acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) activities were measured in tadpoles to determine possible sub-lethal effects. In V. fischeri, M_1,E, which was collected early in the photodegradation process, caused 52% inhibition, while M_3,E, which was collected at the end of the photodegradation process, caused only 17% inhibition. Survival of tadpoles was 100% in samples M₂, M₃, and in M_1,E, M_2,E and M_3,E. The lowest percentages of enzymatic inhibition were observed in samples without removal of H₂O₂: 13.96% (AChE) and 16% (BChE) for M₂, and 24.12% (AChE) and 13.83% (BChE) for M₃. These results show the efficiency of the H₂O₂/UVC process in reducing the toxicity of water or wastewater polluted by commercial formulations of glyphosate. According to the ecotoxicity assays, the conditions corresponding to M₂ (11 ± 1 mg a.e. L^?1 glyphosate and 11 ± 1 mg L^?1 H₂O₂) could be used as a final point for glyphosate treatment with the H₂O₂/UV process.     

Environmental monitoring of alcohol sulfates and alcohol ethoxysulfates in marine sediments

The study describes the environmental monitoring of anionic surfactants―alcohol sulfates (AS) and alcohol ethoxysulfates (AES)—in marine sediments. Concentration values were obtained after pressurised liquid extraction (PLE) and liquid chromatography–tandem mass spectrometry analysis (LC–MS/MS). Samples were collected from a range of wastewater discharge points along the coast of the provinces of Huelva, Málaga, Granada and Almería. Urban, agricultural and industrial wastewaters are discharged at the selected 38 sampling sites. Principal component analysis was carried out in order to evaluate the distribution and behaviour of these compounds in these coastal environments. Evaluation of the data revealed that the behaviour and sources of AS and AES in marine sediments are different, and that the distribution of AES depends on the length of the alkyl chain, while the number of ethoxylated units is not relevant. Additionally, the 38 sampling sites can be grouped into only two types of outfalls according to their AS distribution. The concentration of compounds in sediment samples ranged from 7.52 to 13.50 mg kg^?1 for AS, from 3.04 to 10.68 mg kg^?1 for AES–C₁₂E_x and from 3.83 to 11.56 mg kg^?1 for AES–C₁₄E_x.     

Laboratory and Field Evaluation of the Controlled Condensation System for S03 Measurements in Flue Gas Streams

The study reported by this paper involves the use of the Controlled Condensation System (Goksoyr/Ross Coil) for flue gas S0₃ measurements in both the laboratory and the field, under low and high mass loadings. The Controlled Condensation System cools the flue gas to below the dewpoint of H₂S0₄ but above the H₂0 dewpoint. The resulting aerosol is collected either on the coil walls or on the back-up glass frit. The laboratory recovery of the H₂S0₄ in streams of varying S0₂, H₂0, and H₂S0₄ content was found to be 95 ± 6%. A new quartz filter holder was designed to meet the filtration problems encountered in collecting S0₃ from particle laden flue gas streams. This quartz system, when heated to above 250°C, quantitatively passed the H₂S0₄ into the condensation coil. Later studies with this filter system preloaded with fly ash equivalent to a mass loading of 1.3 g/m³ yielded a 80-85% recovery of H₂S0₄. The laboratory system was simultaneously tested at a 150 megawatt, pulverized coal-fired power plant prior to and after a wet limestone FGD. The inlet grain loading to the FGD ranged from 0.06 g/m³ to 11.4 g/m³ with S0₂ concentrations as high as 4000 ppm. The average inlet H₂S0₄ value was 8.3 ppm and the outlet from the FGD was 3.1 ppm. The source fluctuation value was determined to be ±65%.     

Investigation of aerosol and gas emissions from a coal-fired power plant under various operating conditions

The concentrations of fine particles and selected gas pollutants in the flue gas entering the stack were measured under several common operation modes in an operating coal power plant producing electricity. Particle size distributions in a diameter range from 10 nm to 20 μm were measured by a scanning mobility particle sizer (SMPS), and the flue gas temperature and concentrations of CO₂ and SO₂ were monitored by a continuous emission monitoring system (CEMS). During the test campaign, five plant operating modes were studied: soot blowing, bypass of flue-gas desulfurization (FGD), reheat burner operating at 0% (turned off), 27%, and 42% (normal condition) of its full capacity. For wet and dry aerosols, the measured mode sizes were both around 40 nm, but remarkable differences were observed in the number concentrations (#/cm³, count per square centimeter). A prototype photoionizer enhanced electrostatic precipitator (ESP) showed improved removal efficiency of wet particles at voltages above +11.0 kV. Soot blowing and FGD bypass both increased the total particle number concentration in the flue gas. The temperature was slightly increased by the FGD bypass mode and varied significantly as the rating of reheat burner changed. The variations of CO₂ and SO₂ emissions showed correlations with the trend of total particle number concentration possibly due to the transitions between gas and particle phases. The results are useful in developing coal-fired power plant operation strategies to control fine particle emissions and developing amine-based CO₂ capture technologies without operating and environmental concerns associated with volatile amine emissions.

Implications: The measurement of the fine particle size distributions in the exhaust gas under several common operating conditions of a coal-fired power plant revealed different response relations between aerosol number concentration and the operating condition. A photo-ionizer enhanced ESP was demonstrated to capture fine particles with higher efficiency compared to conventional ESPs, and the removal efficiency increased with the applied voltage. The characteristic information of aerosols and main gaseous pollutants in the exhaust gas is extremely important for developing and deploying CO₂ scrubbers, whose amine emissions and operating effectiveness depends greatly on the upstream concentrations of fine particles, SO₂, from the power plant.