Further Effects of Temperature and Pressure on Photochemical Oxidant Production

A procedure is described for producing a sulfur dioxide (SO₂) contaminated atmosphere within a body plethysmograph, exposing man to this atmosphere while maintaining the SO₂ concentration at a given level, and measuring the concentration with less than a oneminute lag time. A syringe is used to introduce incremental volumes of SO₂ limiting the maximum SO₂ concentration in the chamber and assuring safety of the subject. A Titrilog SO₂ analyzer with its rapid response characteristics provides quick measurement of the SO₂ concentration. The body plethysmograph used in this manner serves simultaneously as a pulmonary function measuring device and as an exposure chamber.     

Cost-Effectiveness of a Photochemical Oxidant Episode Regulation

The precursors used to conduct and the results of a cost-effectiveness study of photochemical oxidant episode control actions for the State of Illinois are analyzed. The method is general enough to be used in analyzing short-term episode regulations in other geographical areas and for other types of pollutants. Real costs and the probable emission reductions of the precursor compounds to oxidant formation, hydrocarbons and nitrogen oxides, are estimated for each of twenty-two control actions and for sets of control actions that are implemented at four episode stages. Control actions affect the use of motor vehicles and parking facilities; scheduling of road repairs; and the operation of manufacturing and other facilities having process emissions, electric power plants, commercial establishments, and refuse incinerators. The actions are analyzed and compared on the basis of relative economic efficiency. The expected annual cost of the regulation and the distribution of cost across sectors are also discussed. The annual cost of the oxidant episode regulation in the Chicago SMSA Is estimated to be $12.9 million; expected annual emission reductions are 1180 ton hydrocarbons and 970 ton nitrogen oxide. It is concluded that the expected cost of the regulation is not overly restrictive if the frequency of major curtailments in manufacturing and transportation is low; the cost is relatively small compared with the estimated annual cost of sulfur dioxide and particulate controls.     

The Effect of Nucleating Particulates on Photochemical Aerosol Formation

The role of nucleating particulates in the formation of photochemical aerosols has been studied in a steady, laminar flow of ultrafiltered air containing NO₂ and octene-1 in the concentration range of (30 to 170 ppm) when subjected to intense irradiation under isothermal conditions. The particulates consisted of monodisperse polystyrene latex (d = 0.36 μ.) in concentrations similar to those in the atmosphere (6 × 10¹ to 3 × 10³ cm^–3); the irradiation intensity varied between (6 to 40 × 10³ lumen/liter) and the mean exposure duration between 30 and 180 sec. Samples of the flow prior to and after its photoactivation were withdrawn either by an Aerosol Spectrometer (AS) or by a Royco Aerosol Photometer (PH). While these indications refer thus to the same system, they differ, because the photometric data include all colloidal components in the airborne state, whereas the counts obtained from the AS deposits refer only to the nucleated latex particles. The following pattern becomes evident: The photochemical reaction yields fractional products (less than three percent) which have the tendency to agglomerate (or polymerize) due to their relatively low volatility—independent of the presence or absence of nucleating particulates. In their presence, this reaction becomes kinetically more probable and thus faster, hence the accumulant formation occurs preferably on the nuclei and causes their growth such that, e.g., a 10-fold higher nuclei concentration will produce under the same conditions 10 times the accumulant mass while autonucleation is suppressed. The growth process appears thus principally different from that of fog formation by H₂O-condensation, whereas for identical super saturation it is inversely proportional to the nuclear concentration. In the absence of nuclei autonucleation, i.e., self-agglomeration, occurs at a much lesser reaction rate and higher photon demand. The growth rate of the nuclei, when present, depends on the concentration of the oxidation catalyst (NO₂), its interaction with the nuclei surface is indicated. Under identical conditions the mass of nuclear accumulant is directly proportional to the concentration of the reactive hydrocarbon, while the growth rate depends on the light intensity and the exposure duration. The findings indicate that density and nature of particulate matter present in an air mass prior or during photo-activation are—aside from the chemical reactant levels—of major significance in aerosol formation.     

The Effects of Photochemical Oxidants on Materials

The excessive cracking of rubber products was one of the earliest indicators of the presence of atmospheric photochemical oxidants. It has been demonstrated that this excessive cracking of rubber is caused by atmospheric ozone formed in the photochemical smog formation process. Depending on the formulation of the rubber, cracking under stress can readily be detected within 3/4 hr when atmospheric oxidant levels are as low as 0.03 ppm. Natural and certain synthetic rubbers are particularly vulnerable. These rubbers when stressed show cracking when exposed to 0.02 ppm laboratory ozone for about 1 hr. Other materials known to deteriorate under atmospheric photochemical smog conditions are textiles and certain dyed fabrics, particularly under conditions of high humidity. Loss of tensile strength of cotton textiles when wet or moist, and similar fading of these dyed fabrics, particularly under high humidity, can be also produced by laboratory exposure of these textiles to pure ozone. Ozone effects on asphaltic materials ate also reported.     

安全饮用水保障处理中试平台的开发和建设

安全饮用水保障处理中试平台，除具有常规处理工艺外，还引入臭氧接触氧化／催化臭氧氧化、纳滤和反渗透过滤技术、动态膜树脂吸附、光催化氧化、管网生物膜控制等新技术。作者介绍了中试平台建设的设计思路、处理流程及控制系统，并对平台建设的作用进行了阐述。     

Effect of Hydrocarbon and NO x on Photochemical Smog Formation under Simulated Transport Conditions

The body of information presented in this paper is directed to those individuals concerned with the effect of urban pollution on downwind areas. Concern has been expressed over the appropriate hydrocarbon and NO _x control strategy to be used in minimizing the effects of ozone and NO₂ on urban population centers and their downwind environs. O₃ and NO₂ formation were studied in smog chamber irradiations as a function of the initial NO _x concentration at three hydrocarbon concentrations. By carrying out the irradiations for a period of time equivalent to one solar day in a continuously diluting system, smog formation in a chemically reacting pollutant system under transport was simulated. The results of this experimental simulation suggest that hydrocarbon reduction reduces O₃ in urban as well as downwind areas while NO _x reduction increases O₃ in the urban area and has little effect on O₃ in downwind areas. Both hydrocarbon and NO _x reduction will reduce atmospheric NO₂ levels, with the effect of NO _x reduction generally being more pronounced.     

The Fate of Aromatic Hydrocarbons in Photochemical Smog Systems: Toluene

The economic impact of various ozone concentrations on California agriculture is examined using an economic model of crop production that accounts for interdependence among crops. Such interdependence recognizes that net economic effects are determined not only by yield sensitivity to ozone but also by market conditions that affect relative crop prices and profitability. Changes in crop yields due to alternations in ambient ozone concentrations are used to drive the economic model. The predicted yield changes are derived from NCLAN data under a range of assumptions concerning functional form and yield effects. The results indicate that the economic effects of ozone are substantial for 13 included crops. The economic estimates display varying sensitivity to the functional form of the response relationship. The need for additional experimental data to more precisely define the relationship depends on the range of policy actions being considered.     

流动水体下的温度对铜绿微囊藻生长的影响

通过室内模拟,在动态水体条件下,温度为25℃和35℃,对太湖水中铜绿微囊藻生长的影响。结果表明：在流速为0.30 m/s、光照度为3300 lx、光暗比为10∶14（h）的条件下,25℃更适合铜绿微囊藻的生长。     

Application of a Three-Layer Photochemical Box Model in an Athens Street Canyon

ABSTRACT

The aim of this paper is to show that a photochemical box model could describe the air pollution diurnal profiles within a typical street canyon in the city of Athens. As sophisticated three-dimensional dispersion models are computationally expensive and they cannot serve to simulate pollution levels in the scale of an urban street canyon, a suitably modified three-layer photochemical box model was applied. A street canyon of Athens with heavy traffic was chosen to apply the aforementioned model. The model was used to calculate pollutant concentrations during two days with meteorological conditions favoring pollutant accumulation. Road traffic emissions were calculated based on existing traffic load measurements. Meteorological data, as well as various pollutant concentrations, in order to compare with the model results, were provided by available measurements. The calculated concentrations were found to be in good agreement with measured concentration levels and show that, when traffic load and traffic composition data are available, this model can be used to predict pollution episodes. It is noteworthy that high concentrations persisted, even after additional traffic restriction measures were taken on the second day because of the high pollution levels.     

草甘膦清洁生产研究与实践效果

草甘膦是目前国内外通用的一种高效、低毒、低残留的除草剂.通过对草甘膦生产工艺中主要产生污染物的双甘膦工段的改造,用三氯化磷一次合成双甘膦,可提高反应转化率,降低物料消耗,减少废水排放,达到实现减污增效的目的.     

Effects of Land Use Data on Dry Deposition in a Regional Photochemical Model for Eastern Texas

ABSTRACT

Land use data are among the inputs used to determine dry deposition velocities for photochemical grid models such as the Comprehensive Air Quality Model with extensions (CAMx) that is currently used for attainment demonstrations and air quality planning by the state of Texas. The sensitivity of dry deposition and O₃ mixing ratios to land use classification was investigated by comparing predictions based on default U.S. Geological Survey (USGS) land use data to predictions based on recently compiled land use data that were collected to improve biogenic emissions estimates. Dry deposition of O₃ decreased throughout much of eastern Texas, especially in urban areas, with the new land use data. Predicted 1-hr averaged O₃ mixing ratios with the new land use data were as much as 11 ppbv greater and 6 ppbv less than predictions based on USGS land use data during the late afternoon. In addition, the area with peak O₃ mixing ratios in excess of 100 ppbv increased significantly in urban areas when deposition velocities were calculated based on the new land use data. Finally, more detailed data on land use within urban areas resulted in peak changes in O₃ mixing ratios of ~2 ppbv. These results indicate the importance of establishing accurate, internally consistent land use data for photochemical modeling in urban areas in Texas. They also indicate the need for field validation of deposition rates in areas experiencing changing land use patterns, such as during urban reforestation programs or residential and commercial development.     

清洁生产指标体系的评价模式探讨

简要分析了目前清洁生产评价中的一些问题，讨论了已有评价方法的优缺点，着重介绍了模糊数学评价方法，并举例说明其在定量分析和综合判断方面可以较好地评价出企业清洁生产的程度。     

The Effect of NMOC and Ozone Aloft on Modeled Urban Ozone Production and Control Strategies

Carbon bond (CB-III) fractions for non-methane organic carbon compounds (NMOC) measured in the background alrmass adverted into several urban areas in the eastern and southern United States are reported. These, together with ozone measured aloft, were used In an Empirical Kinetic Modeling Approach (EKMA) to model urban ozone production and urban ozone control strategies.

Over a range of zero to double the mean of the measured NMOC concentrations aloft (0 to 70 ppbC) and zero to the highest ozone levels recorded aloft (0 to 65 ppb), it was found that urban ozone production and control strategies were relatively insensitive to NMOC from aloft. However, urban ozone production was sensitive to ozone from aloft, while ozone control strategies were insensitive to ozone from aloft.     

A Study of Sulfur Dioxide in Photochemical Smog I. Effect of SO2 and Water Vapor Concentration in the 1-Butene/NOx/SO2 System

There is an appreciable chemical interaction between SO₂ and photochemical smog which depends on the concentration of SO₂ and water vapor. The rate of decay of SO₂ concentration is greatly increased in the presence of photochemical smog. With 0.75 ppm SO₂, a light-scattering aerosol is produced in dry systems and systems at 22 and 55% relative humidity (RH). Aerosol is not observed until after the NO₂ peak has been reached and the NO concentration has fallen to a very low value. The formation of aerosol corresponds in time to the region of most rapid decrease in the SO₂ profile. In systems at 65% RH or with smaller amounts of SO₂, no light scattering is observed, but the percentage of SO₂ disappearing is greater. In relatively dry systems the presence of SO₂ results in a general slowing down of the photochemical smog reactions. In systems containing water vapor concentrations comparable to those found in the atmosphere, the inhibiting influence of SO₂ on the smog reaction is less pronounced. However, the maximum concentration of oxidant produced by the photochemical smog reactions is significantly lower when SO₂ is present.     

无机盐对SO2—H2O—CaCO3气液固三相反应系统pH值的影响

研究了硫酸钠、硝酸钠和氯化钠及相应钙盐对石灰石浆液烟气脱硫条件下ＳＯ２－Ｈ２Ｏ－ＣａＣＯ３气、液、固三相反应系统中ｐＨ值的影响。发现硫酸钠能明显提高系统的ｐＨ值，硝酸钠和氯化钠使ｐＨ值提高的幅度不大，而３种钙盐均使ｐＨ值降低。根据膜模型的分析结果，认为无机盐影响该反应系统ｐＨ值的主要原因是无机盐的加入改变了石灰石表面的ｐＨ值。     

Analysis of Ozone and Nitric Oxide by a Chemiluminescent Method in Laboratory and Atmospheric Studies of Photochemical Smog

A prototype instrument monitoring ozone or nitric oxide has been used for photochemical smog studies in the laboratory and the atmosphere. The principle of the detector is based on the chemiluminescent reaction