国外最佳管理措施在农业非点源污染防治中的应用

概述了国外最佳管理措施(BMPs)在农业非点源污染防治中的应用现状,工程措施有人工湿地、植被缓冲区和水陆交错带;管理措施有测土施肥、变量施肥、免耕-少耕法和生物篱等,以及它们所取得的成果,并展望其在国外和国内的发展趋势和前景.     

Waste Reduction Practices at Two Chromated Copper Arsenate Wood-Treating Plants

Abstract

Two chromated copper arsenate (CCA) wood-treating plants were assessed for their waste reduction practices. The objectives of this study were to estimate the amount of hazardous wastes that a well-designed and well-maintained CCA treatment facility would generate and to identify waste reduction opportunities. These practices have been reflected in several areas, including facility designs, process controls, and management practices. The facility designs included enclosed treatment buildings, covered drip pads, a drip pan, an automatic lumber handling system, power rollers, computerized chemical mixing systems, spill containments, and air ventilation systems to minimize mist or droplet emissions from cylinders and work tanks. Management practices have included pretreatment quality control, improved housekeeping, resource recovery and recycling, and operator training.     

Net carbon flux from agricultural ecosystems: methodology for full carbon cycle analyses

Agricultural ecosystems have the potential to sequester carbon in soils by altering agricultural management practices (i.e. tillage practice, cover crops, and crop rotation) and using agricultural inputs (i.e. fertilizers and irrigation) more efficiently. Changes in agricultural practices can also cause changes in CO2 emissions associated with these practices. In order to account for changes in net CO2 emissions, and thereby estimate the overall impact of carbon sequestration initiatives on the atmospheric CO2 pool, we use a methodology for full carbon cycle analysis of agricultural ecosystems. The analysis accounts for changes in carbon sequestration and emission rates with time, and results in values representing a change in net carbon flux. Comparison among values of net carbon flux for two or more systems, using the initial system as a baseline value, results in a value for relative net carbon flux. Some results from using the full carbon cycle methodology, along with US national average values for agricultural inputs, indicate that the net carbon flux averaged over all crops following conversion from conventional tillage to no-till is -189 kg C ha(-1) year(-1) (a negative value indicates net transfer of carbon from the atmosphere). The relative net carbon flux, using conventional tillage as the baseline, is -371 kg C ha(-1) year(-1), which represents the total atmospheric CO2 reduction caused by changing tillage practices. The methodology used here illustrates the importance of (1) delineating system boundaries, (2) including CO2 emissions associated with sequestration initiatives in the accounting process, and (3) comparing the new management practices associated with sequestration initiatives with the original management practices to obtain the true impact of sequestration projects on the atmospheric CO2 pool.     

Phosphorus losses from monitored fields with conservation practices in the Lake Erie Basin,USA

Conservation practices are implemented on farm fields in the USA through Farm Bill programs; however, there is a need for greater verification that these practices provide environmental benefits (e.g., water quality). This study was conducted to assess the impact of Farm Bill eligible conservation practices on soluble P (SP) and total P (TP) losses from four fields that were monitored between 2004 and 2013. No-tillage doubled SP loading compared to rotational tillage (e.g., tilled only before planting corn); however, no-tillage decreased TP loading by 69 % compared to rotational tillage. Similarly, grassed waterways were shown to increase SP loads, but not TP loads. A corn–soybean–wheat–oat rotation reduced SP loads by 85 % and TP loads by 83 % compared to the standard corn–soybean rotation in the region. We can potentially attain TP water quality goals using these Farm Bill practices; however, additional strategies must be employed to meet these goals for SP.     

Banana Production Systems: Identification of Alternative Systems for More Sustainable Production

Large-scale, monoculture production systems dependent on synthetic fertilizers and pesticides, increase yields, but are costly and have deleterious impacts on human health and the environment. This research investigates variations in banana production practices in Costa Rica, to identify alternative systems that combine high productivity and profitability, with reduced reliance on agrochemicals. Farm workers were observed during daily production activities; 39 banana producers and 8 extension workers/researchers were interviewed; and a review of field experiments conducted by the National Banana Corporation between 1997 and 2002 was made. Correspondence analysis showed that there is no structured variation in large-scale banana producers’ practices, but two other banana production systems were identified: a small-scale organic system and a small-scale conventional coffee–banana intercropped system. Field-scale research may reveal ways that these practices can be scaled up to achieve a productive and profitable system producing high-quality export bananas with fewer or no pesticides.     

Knowledge, attitude and practices toward dioxins in China's waste incineration industry and coking industry

A questionnaire was used to survey the knowledge and attitude of senior managers toward dioxins at five waste incineration plants and seven coking plants. A field survey was performed to verify dioxin control practices at two of the waste incineration plants and one of the coke plants. All the respondents at the waste incineration plants claimed to be knowledgeable about dioxins and had a proactive attitude toward dioxin control. The field survey verified the implementation of various dioxin control measures at their plants. However, the coking plants' respondents were ignorant about dioxins. This study reveals that dioxin emission policies have had a significant effect on industrial practices and knowledge. The differences in economics between the two sites have also contributed to the disparity in their respective knowledge levels. Finally, the paper gives the corresponding recommendations on how to further improve the level of dioxin knowledge and control practices in China.     

Severe particulate pollution from the deposition practices of the primary materials of a cement plant

Global cement production has increased twofold during the last decade. This increase has been accompanied by the installation of many new plants, especially in Southeast Asia. Although various aspects of pollution related to cement production have been reported, the impact of primary material deposition practices on ambient air quality has not yet been studied. In this study, we show that deposition practices can have a very serious impact on levels of ambient aerosols, far larger than other cement production-related impacts. Analyses of ambient particulates sampled near a cement plant show 1.3–30.4 mg/m³ total suspended particulates in the air and concentrations of particles with a diameter of 10 μm or less at 0.04–3 mg/m³. These concentrations are very high and seriously exceed air quality standards. We unequivocally attribute these levels to outdoor deposition of cement primary materials, especially clinker, using scanning electron microscopy/energy-dispersive X-ray spectroscopy. We also used satellite-derived aerosol optical depth maps over the area of study to estimate the extent of the spatial impact. The satellite data indicate a 33 % decrease in aerosol optical depth during a 10-year period, possibly due to changing primary material deposition practices. Although the in situ sampling was performed in one location, primary materials used in cement production are common in all parts of the world and have not changed significantly over the last decades. Hence, the results reported here demonstrate the dominant impact of deposition practices on aerosol levels near cement plants.     

Quality and practice in integrated assessment: some users' perspectives

This paper describes concepts and ideas related to the integrated assessment (IA) approach, as they are perceived by a limited number of existing or potential IA users. IA is understood here as a reflexive process aimed at supporting the integration of different forms of knowledge within the decision-making process. Interviews with representatives from different Directorates of the European Commission (and two Brussels-based NGOs) revealed general support and enthusiasm for the IA approach as presented. Current practices relating to the management of uncertainty, communication of technical or expert information, and the use of models are discussed, and the potential for adaptation of these practices according to the IA approach are explored.     

Garbage in garbage out: the contribution of our industrial advancement to wastewater degeneration

Environmental Science and Pollution Research - Natural water sources are habitually marred by insidious anthropogenic practices and municipal wastewater discharges that contain either of xenobiotic...     

Ginkgo agroforestry practices alter the fungal community structures at different soil depths in Eastern China

Environmental Science and Pollution Research - Agroforestry practices aim to achieve environmentally friendly land use. Fungi play a primarily role in soil organic carbon and nutrient maintenance,...     

Impact of green supply chain management practices on firms’ performance: an empirical study from the perspective of Pakistan

Environmental Science and Pollution Research - This article investigates the impact of five determinants of the green supply chain practices on organizational performance in the context of Pakistan...     

Effect of straw retention on carbon footprint under different cropping sequences in Northeast China

Environmental Science and Pollution Research - Inappropriate farm management practices can lead to increased agricultural inputs and changes in atmospheric greenhouse gas (GHG) emissions, impacting...     

The use of pesticides in Polish agriculture after integrated pest management (IPM) implementation

Environmental Science and Pollution Research - The aim of the conducted study was to characterize the attitudes and practices of Polish farmers in the area of performing chemical plant protection...     

Best management practices for automobile salvage yards

This paper collects a group of best management practices (BMPs) that outline the techniques needed to establish an environmentally friendly automobile recycling facility. Using common as well as unique BMPs from several different states, a full but not detailed set of management practices has been established. Since every facility is different, each facility will need a set of BMPs that meets its specific needs. However, the integrity behind the BMPs must remain the same. Its main purpose is to reduce the amount of pollutants seeping into and contaminating the underground water supply. If these BMPs are properly applied to every automobile salvage yard it will greatly reduce groundwater pollution and create a safer working environment for all employees.     

A framework for evaluating biodiversity mitigation metrics

Biodiversity mitigation is a cornerstone of applied conservation. Mitigation encompasses a suite of practices, ranging from planned avoidance of impacts to creation of new natural habitats. Accurate and appropriate metrics quantifying impacts to natural systems and the effectiveness of restoration are necessary to measure the success of different mitigation strategies. Because effective mitigation requires adequate metrics, we developed a Biodiversity Metrics Framework to assist practitioners and policy makers in assessing biodiversity mitigation metrics. Based on Noss’ Hierarchy of Biodiversity, the Scorecard highlights the mismatch between scientifically defined best practices and metrics required by policy. The Framework may serve a vital role in standardizing and validating mitigation projects into the future.

     

Farming experience and farmers’ adoption of low-carbon management practices: the case of soil testing and fertilizer recommendations in China

Environmental Science and Pollution Research - In response to global climate change, the Chinese Government has taken numerous measures to promote low-carbon management practices, but the overall...     

Acute exposition to Roundup Transorb® induces systemic oxidative stress and alterations in the expression of newly sequenced genes in silverside fish (Odontesthes humensis)

Environmental Science and Pollution Research - Roundup Transorb® (RDT) is a glyphosate-based herbicide commonly used in agricultural practices worldwide. This herbicide exerts negative effects...     

Positive matrix factorization as source apportionment of soil lead and cadmium around a battery plant (Changxing County,China)

Chemical compositions of soil samples are multivariate in nature and provide datasets suitable for the application of multivariate factor analytical techniques. One of the analytical techniques, the positive matrix factorization (PMF), uses a weighted least square by fitting the data matrix to determine the weights of the sources based on the error estimates of each data point. In this research, PMF was employed to apportion the sources of heavy metals in 104 soil samples taken within a 1-km radius of a lead battery plant contaminated site in Changxing County, Zhejiang Province, China. The site is heavily contaminated with high concentrations of lead (Pb) and cadmium (Cd). PMF successfully partitioned the variances into sources related to soil background, agronomic practices, and the lead battery plants combined with a geostatistical approach. It was estimated that the lead battery plants and the agronomic practices contributed 55.37 and 29.28 %, respectively, for soil Pb of the total source. Soil Cd mainly came from the lead battery plants (65.92 %), followed by the agronomic practices (21.65 %), and soil parent materials (12.43 %). This research indicates that PMF combined with geostatistics is a useful tool for source identification and apportionment.