Chemical Manufacturers Association 1984 Hazardous Waste Survey

This paper discusses the Chemical Manufacturers Association's 1984 survey of the chemical industry's hazardous waste management practices. The survey data include a breakdown of how the industry's hazardous wastes are managed, detailing generation, treatment and disposal, and cover 725 plants in 81 companies. The 1984 survey is the third CM A hazardous waste survey, and the paper discusses resultant waste treatment trends from 1981- 1984, the period covered by previous surveys. A total of 278.5 million tons of hazardous waste was treated and disposed by survey respondents. Of this, 276.8 million tons was hazardous wastewater and 1.7 million tons was solid hazardous waste. The survey solid hazardous waste total was projected to the entire industry (Standard Industrial Code 2800) and is estimated at 6.9 million tons. The survey showed continued decreasing trends in hazardous waste generation in the chemical industry. It demonstrated changes in hazardous waste management practices, with decreased use of landfills and increased incineration of the solid wastes that are generated.     

Hazardous wastes and economic risk reduction: case study, Poland

A concise summary balance of industrial and hazardous waste is given, reflecting the situation in Poland. Nearly 130 million tonnes of waste were generated annually in the past in more than 1300 larger industrial plants. Approximately 1800 million tonnes of industrial waste is already stockpiled. The amount of hazardous waste generated per year was 0.3 and 1.0 million tonnes of the first and second class of toxicity, respectively. Seventeen existing on-site incinerators cannot treat the whole amount of solid and hazardous waste generated. Therefore, landfilling is still the most widely used method of waste disposal. Decontamination of the abandoned areas left by the Soviet Army, and reclamation of some hundreds of storage sites filled with outdated pesticides are now added to the national plan of waste management. Its implementation, including introduction of the best available and best managed technologies of hazardous waste treatment and disposal, will take at least 20 to 30 years.     

A comprehensive survey of graduate education and training in hazardous waste management

The United States Department of Health and Human Services through Wayne State University (WSU) has completed a study of hazardous waste education and training in the United States. The study documents university course work and degrees as well as non-degree continuing education short courses. Major portions of the study are based on a WSU sponsored survey in which 1469 four-year degree granting institutions were contacted. Of the 732 institutions responding, 113 were identified as offering course work of some kind in hazardous waste. Information on 499 distinct non-degree short courses was also gathered and evaluated. The purpose, methodology and results of the study are summarized in this article.     

Evaluation of a Statewide Matching Grant Program for the Collection of Household Hazardous Waste

Between Fall 1985 and Spring 1987, the Massachusetts Departments of Environmental Management and Environmental Quality Engineering awarded communities $490,000 in matching state grants for the collection of household hazardous waste. Funded collections resulted in the disposal of approximately 291 tons of waste at an average cost of $9 per gallon. Household participation rates ranged from 0.2 percent to 5.8 percent. An average of 10 gallons of household hazardous waste was disposed of per participating household. Total collection costs including local and state shares exceeded $900,000. Differences in participation, wastes collected and collection costs among communities were due to variations in outreach and education efforts, experience, bid specifications, wastes collected, setup costs, and collection techniques. The relative high cost per participating household and low participation rate suggest the need for alternative approaches to the management of household hazardous waste which will be explored in future grant cycles.     

危险废物分级管理方法研究

危险废物因具有毒性、易燃性、腐蚀性和反应性等多种危害特性,如果暴露于环境中将会对人类健康和生态环境造成很大威胁.深入分析了欧美等一些国家对危险废物进行分级管理的方法,针对中国目前危险废物的产生现状和管理现状,提出了综合考虑危险废物的产生量和活性大小等各个方面,借助风险评价对危险废物进行分级管理的方法和原则,以及相应的分级管理程序的建议,为完善中国的危险废物管理体系提供参考.     

Towards sets of hazardous waste indicators. Essential tools for modern industrial management

Decision-makers require useful tools, such as indicators, to help them make environmentally sound decisions leading to effective management of hazardous wastes. Four hazardous waste indicators are being tested for such a purpose by several countries within the Sustainable Development Indicator Programme of the United Nations Commission for Sustainable Development. However, these indicators only address the 'down-stream' end-of-pipe industrial situation. More creative thinking is clearly needed to develop a wider range of indicators that not only reflects all aspects of industrial production that generates hazardous waste but considers socio-economic implications of the waste as well. Sets of useful and innovative indicators are proposed that could be applied to the emerging paradigm shift away from conventional end-of-pipe management actions and towards preventive strategies that are being increasingly adopted by industry often in association with local and national governments. A methodological and conceptual framework for the development of a core-set of hazardous waste indicators has been developed. Some of the indicator sets outlined quantify preventive waste management strategies (including indicators for cleaner production, hazardous waste reduction/minimization and life cycle analysis), whilst other sets address proactive strategies (including changes in production and consumption patterns, eco-efficiency, eco-intensity and resource productivity). Indicators for quantifying transport of hazardous wastes are also described. It was concluded that a number of the indicators proposed could now be usefully implemented as management tools using existing industrial and economic data. As cleaner production technologies and waste minimization approaches are more widely deployed, and industry integrates environmental concerns at all levels of decision-making, it is expected that the necessary data for construction of the remaining indicators will soon become available.     

Factors influencing appropriate management of household hazardous waste in Nakhon Nayok,Thailand: A multilevel analysis

Household hazardous products contain hazardous chemicals, so when discarding these products a household hazardous waste (HHW) stream is created. HHW is a major environmental problem in Thailand, yet HHW has received scant attention so management is often inadequate or inappropriate. The objective of this study was to investigate the factors associated with appropriate HHW management in Thailand. Data were collected using a structured questionnaire completed during randomly assigned household interviews in Nakhon Nayok province, Thailand, between February and May 2017. The proportion of “appropriate management” was presented as percentage with its 95% confidence interval (CI). A multilevel mixed-effects logistic regression model was performed to determine the factors associated with appropriate HHW management, with 663 households included. The proportion of appropriate HHW management was 23.4% (95%CI: 20.2% to 26.6%). Both individual and local government administrative organization factors had on an effect on appropriate HHW management, including (a) being female (adjusted odds ratio [OR]:1.59; 95%CI: 1.03 to 2.46); (b) household size (adjusted OR: 1.66; 95%CI: 1.09 to 2.54); (c) knowledge score vis-à-vis HHW management (adjusted OR: 1.78; 95%CI: 1.43 to 2.02); (d) appropriate HHW storage behavior (adjusted OR: 2.48; 95%CI: 1.60 to 3.83); and (e) appropriate HHW use behavior (adjusted OR: 3.97; 95%CI: 2.40 to 6.58). The government of Thailand might consider a program to increase appropriate management of household hazardous waste to mitigate public health and environmental contamination risks.

Implications: Household hazardous waste becomes a major concern in many countries, including Thailand. The household hazardous waste management should be started at the source first, because household hazardous waste is mixed with the municipal waste stream. Thus, this study finding will be important for policymakers such as government and local government and can be used to create a specific policy and campaigns for household hazardous waste management.     

基于因特网的危险废物转移联单系统研究与开发

危险废物转移联单是跟踪危险废物转移和处理处置的基本方法 ,也是实施危险废物全过程管理的有效工具。然而 ,目前使用的纸质联单系统 ,运行过程繁杂、周期长、耗费人力和物力 ,与现代化管理不相适应。本文提出了符合中国国情的电子化转移联单解决方案 ,论述了系统的设计开发过程和运行情况。这一系统采用了因特网技术 ,能实现联单运行的电子化和自动化 ,简化运行过程 ,提高效率 ,为我国危险废物转移的电子化管理奠定了基础     

Public Policy impacts on the Generation and Disposal of Hazardous Waste in New York State

A number of policies adopted by the federal government and the states have been designed to promote waste reduction or influence the choice of waste disposal technologies employed by generators of hazardous waste. Graphic analysis of smoothed time series data for hazardous wastes manifested in New York State for the period between June 1982 and February 1987 suggests that some of these policies have had the intended effects.

Significant shifts in manifested waste volumes are evident that coincide with the following policy interventions: (1) increased state waste-end tax rates; (2) state and federal landfill bans; (3) federal restrictions on burning hazardous wastes and waste oils for energy recovery; and (4) changes in the federal regulatory definition of hazardous waste. Other changes in waste generation and management appear to be attributable to such factors as state and regional economic conditions and changes in instate treatment and disposal facility capacity. Analysis of the management of specific waste types supports evidence from the graphic analysis that waste generators changed from land disposal to “higher” waste handling technologies in response to several policy interventions.     

Public policy impacts on the generation and disposal of hazardous waste in New York State

A number of policies adopted by the federal government and the state have been designed to promote waste reduction or influence the choice of waste disposal technologies employed by generators of hazardous waste. Graphic analysis of smoothed time series data for hazardous wastes manifested in New York State for the period between June 1982 and February 1987 suggests that some of these policies have had the intended effects. Significant shifts in manifested waste volumes are evident that coincide with the following policy interventions: (1) increased state waste-end tax rates; (2) state and federal landfill bans; (3) federal restrictions on burning hazardous wastes and waste oils for energy recovery; and (4) changes in the federal regulatory definition of hazardous waste. Other changes in waste generation and management appear to be attributable to such factors as state and regional economic conditions and changes in instate treatment and disposal facility capacity. Analysis of the management of specific waste types supports evidence from the graphic analysis that waste generators changed from land disposal to "higher" waste handling technologies in response to several policy interventions.     

Hazardous Waste Minimization: Part IX Waste Minimization in the Automotive Repair Industry

Waste minimization in the automotive repair industry is characterized by the large numbers of small quantity generators (SQG) producing solvent, alkaline and detergent hazardous wastes. On-site management of multiple processes which vary depending on the size of shop make the administration of hazardous waste policies particularly complex. This paper presents the quantities and types of hazardous materials typically produced. Guidelines are presented to allow generators to organize a waste minimization program.     

Hazardous waste disposal in the UK

Custom and practice have exerted a powerful influence on waste management in the UK. A notable feature is the role of local government, which remains dominant despite expanding legislation and the increasing technical complexity of waste management. The private sector has long had a major role in the transporting and disposal of hazardous waste. The Environmental Protection Act of 1990 represented a major revision of UK environmental legislation. A significant advance in the handling of hazardous wastes was the imposition of a new principle of 'Duty of Care' on all concerned parties.     

Air Pollution in the Republic of Korea

This paper discusses the potential for using commercially available treatment techniques to remove VOCs from hazardous waste streams and addresses some of the issues associated with making waste treatment a viable VOC emission control technique for hazardous waste management facilities. It discusses the waste streams of concern because of their volatile constituents and describes potentially applicable treatment techniques. The use of models for treatment process design is described. Finally, the paper discusses treatment cost, treatment residuals, and considerations of importance in choosing where in the life cycle of a hazardous waste stream to treat it.     

Recovery of an Aqueous Iron Phosphating/ Degreasing Bath by Ultrafiltration

Aqueous cleaners are emerging as safe and effective alternatives to solvent degreasers, but switching to water-based cleaners may create a new waste which is high in oil and grease and potentially RCRA hazardous. In the case study summarized here, one metal fabricator replaced a trichloroethylene degreaser with an aqueous iron phosphating/degreasing bath to clean and precondition steel parts. The aqueous bath typically lasted three to four months, until the buildup of oil in the tank began to sacrifice product quality and raise oil and grease levels in the rinse water discharge. Hauling away and replacing the spent cleaner resulted in more than 15,000 gallon/year of hazardous waste.

Ultrafiltration was selected as the most promising technology to recycle the aqueous cleaner and thereby reduce hazardous waste generation. Following pilot-scale testing at the Illinois Hazardous Waste Research and Information Center, on-site full-scale testing integrated the new waste reduction scheme directly into the facility’s production process. Ultrafiltration continuously filtered and returned clean process solution back to the iron phosphating/degreasing bath during normal plant operation, substantially reducing and maintaining oil concentrations at acceptable operating levels. The new process design successfully reduced hazardous waste generation 99.8 percent with a payback period of only 6.9 months.     

Hazardous Waste Minimization: Part VI Waste Minimization in the Foundry Industry

The foundry industry is a major consumer of waste materials (scrap). Unfortunately, the recycling of these waste materials can result in the generation of hazardous wastes that must be properly managed at a significant cost. This article focuses on two waste streams in the foundry industry; calcium carbide desulfurization slag and melt emission control residuals. The author presents an overview of how foundries have evaluated different waste management options with the ultimate goal of minimizing the generation of hazardous waste.     

The Use of Electrokinetics for Hazardous Waste Site Remediation

The Superfund Innovative Technology Evaluation (SITE) program was authorized as part of the 1986 amendments to the Superfund legislation. It represents a joint effort between U.S. EPA’s Office of Research and Development and Office of Solid Waste and Emergency Response. The program is designed to assist and encourage the development of waste treatment technologies that would contribute to more solutions to our hazardous waste problems.

Recently, EPA, through the SITE program, issued a work assignment to assess the “stateof- the-art” of electroklnetically enhanced contaminant removal from soils. Prior research efforts, both laboratory and field, have demonstrated that electroosmosis has the potential to be effective In facilitating the removal of certain types of hazardous wastes from soils. Particularly encouraging results have been achieved with inorganics in fine-grained soils where more traditional removal alternatives are less effective.

Although the results of various studies suggest that electrokinetics is a promising technology, further testing Is needed at both the laboratory and field levels to fully develop this technology for site remediation. A conceptual test program Is presented based on best available data which incorporates system design and operating parameters used in previous applications of this technology In the use of electrokinetics treatment as a remediation technique at hazardous waste sites.     

Flow rates and compositions of incinerated waste streams in the United States.

The quantity and composition of RCRA hazardous wastes incinerated during 1986 were examined using the National Hazardous Waste Survey. This Survey, collected for U.S. EPA by the Research Triangle Institute, is the most extensive examination of hazardous waste generation and management available. The survey data show that although a wide variety of hazardous wastes were treated by incineration, more than 75 percent of incinerated waste streams were from chemical manufacturing. The survey data also show that more than 90 percent of the incinerated wastes were treated by incinerators located at the facility generating the waste. Despite the predominance of a single industrial sector in generating incinerated hazardous wastes, the compositional profile of the wastes is far from uniform. To illustrate this variability, the metals and chlorine content of the wastes are reported along with the sources of the metal and chlorine loadings.     

我国危险废物管理现状及发展趋势

本文介绍了我国危险废物产生量、分布特点、管理现状及发展趋势 ,分析了我国地方及云南省危险废物管理中存在的问题 ,提出了解决问题的对策和建议。     

长江流域水电站施工区生活垃圾特性及处理处置决策模型研究

随着中国长江流域水电开发进入高峰期,大量的建设人员进入水电站施工营地,导致施工区的生活垃圾处理处置问题日益凸显。通过对金沙江HPS1水电站、雅砻江HPS2水电站和HPS3水电站、大渡河HPS4水电站施工区生活垃圾状况的调查表明,水电站施工生活区生活垃圾人均产量平均值约为0.68kg/d;以厨余、渣土、纸类塑料和橡胶为主,电池等危险废物含量甚微;容重、低位热值、生物可降解物质量分数的平均值分别为358kg/m3、5 234kJ/kg、43.22%。结合施工区所处的环境条件和周围的市政设施现状,采用层次分析法和最小成本法,构建了长江流域水电站施工区生活垃圾处理处置决策模型,可为大型水电站开发过程中施工区生活垃圾全过程管理提供指导。根据决策模型计算得出,HPS1、HPS2、HPS4水电站施工区生活垃圾最优处理处置技术为卫生填埋,HPS3水电站以外运综合处理最优。