Nashville Sulfur Dioxide Emission Inventory and the Relationship of Emission to Measured Sulfur Dioxide

A detailed inventory of sulfur dioxide emissions was prepared as part of the Nashville Community Air Pollution Study conducted by the Public Health Service during 1958–59. The primary purpose of the inventory was to provide data for a study of the relationship between the emission of sulfur dioxide and measured ambient levels. The development of the inventory, data collection methods, and calculations are described. Ambient levels of sulfur dioxide were related to average emissions of sulfur dioxide in such a way (correlation coefficient = 0.81) that mean seasonal concentrations of atmospheric sulfur dioxide in square-mile areas could be predicted with fairly good confidence from a knowledge of sulfur dioxide emissions. For these long-period {average) predictions meteorological variables can be disregarded. On a square-mile basis, on the average, one ton of sulfur dioxide emitted per day produced a mean atmospheric sulfur dioxide concentration of 0.022 ppm, and 10 tons of sulfur dioxide per day produced a concentration of 0.067 ppm.     

Sulfur Dioxide Emission Limitation (Sdel) Program at Tva Power Plants

TVA is conducting a program of intermittent control of SO₂ emissions at nine of its coal-fired power plants.The program is designed to limit SO₂ emissions by reducing generation during adverse atmospheric conditions to avoid exceeding ambient SO₂ standards. Each is identified as a Class I or Class II program—based primarily on its design and operational complexity. The four Class I programs (Paradise, Cumberland, Allen, Gallatin) operate 7 days/week from early morning through mid-afternoon. The five Class II programs (Kingston, Widows Creek, Colbert, Johnsonville, Shawnee) operate 24 hours/day and 7 days/week. Environmental data stations (EDS) are located at each plant site; the staff has the responsibility for the collection and validation of the onsite meteorological data, the SO₂ mobile and fixed monitoring network data, the plant operational data, and the meteorological forecast data from the Meteorological Forecast Center in Muscle Shoals, AL. At the EDS, the data are entered into a computer operating model for scheduling plant generation reductions.     

The Use of Nahcolite Ore and Bag Filters For Sulfur Dioxide Emission Control

This paper describes some technical and economic aspects of the nahcolite ore injection process for the simultaneous removal of fly ash and sulfur oxides from stack gases. The process is capable of removing greater than 99% of the particulate matter and greater than 70% of the sulfur oxides present in such gases. In the process, nahcolite ore, a naturally occurring material containing 70 to 90% sodium bicarbonate, is ground to 90% passing through —200 mesh screens. Approximately 20% of the ground ore is used to precoat the filter bags in a baghouse filter while the remainder of the material is fed into the flue gas Just ahead of the baghouse. The flue gas is drawn through the baghouse by induced draft fans and sent up the stack. Most of the SO₂ and practically all of the fly ash in the flue gas can be removed as the gas passes through the filter bags. The spent nahcolite ore and fly ash are collected and conveyed to waste disposal as landfill, or alternatively processed for insolubilization by coprecipitation prior to landfilling. The technical feasibility of the process has been demonstrated in both bench scale and pilot scale engineering studies. Economic analyses performed for the cases of plants located in the midwest and southwest indicate lower capital costs for the nahcolite injection process when compared to wet scrubbing. On an annual cost basis, the nahcolite ore Injection process is comparable in cost to wet scrubbing for the case of the southwestern power plant, and somewhat more expensive for the case of the midwestern plant.     

Photo-Oxidation of Sulfur Dioxide

SO₂/O₂ mixtures were photolyzed at 3130 Å and in the range 2500–4000 Å at room temperature. The only product of photolysis was SO₃. Attempts to estimate ф(S0₃) using mass spectrometry, l.R. spectroscopy and pressure change measurements were unsuccessful, because it was not possible to obtain reproducible quantitative estimates of SO₃. ф(SO₂) values were determined by monitoring the 3130 Å absorption for its concentration measurements. ф(SO₂) was independent of SO₂ (11.6 to 50.4 torr) and O₂ (50.0 to 390.6 torr) pressures. At 3130 Å, ф(SO₂) varied between 1.5 × 10^?2 and 2.2 X 10^?2. Over the integrated range 2500–4000 Å ф(SO₂) values of 2.1 X 10^?3 to 2.9 X 10^?3 were obtained. The differences in ф(SO₂) values are explained in terms of wavelength dependence of the rate constants for the two primary reactions: ¹SO₂ + SO₂ → 2SO₂(1) and ¹SO₂ + SO₂ → ³SO₂ + SO₂(2); (k₂/k₁) _{3130 Å} ≈ 10(k₂/k₁)_{2500–4000 Å}.     

Electricity from Fossil Fuels without CO2 Emissions: Assessing the Costs of Carbon Dioxide Capture and Sequestration in U.S. Electricity Markets

ABSTRACT

The decoupling of fossil-fueled electricity production from atmospheric CO₂ emissions via CO₂ capture and sequestration (CCS) is increasingly regarded as an important means of mitigating climate change at a reasonable cost. Engineering analyses of CO₂ mitigation typically compare the cost of electricity for a base generation technology to that for a similar plant with CO₂ capture and then compute the carbon emissions mitigated per unit of cost. It can be hard to interpret mitigation cost estimates from this plant-level approach when a consistent base technology cannot be identified. In addition, neither engineering analyses nor general equilibrium models can capture the economics of plant dispatch. A realistic assessment of the costs of carbon sequestration as an emissions abatement strategy in the electric sector therefore requires a systems-level analysis. We discuss various frameworks for computing mitigation costs and introduce a simplified model of electric sector planning. Results from a “bottom-up” engineering-economic analysis for a representative U.S. North American Electric Reliability Council (NERC) region illustrate how the penetration of CCS technologies and the dispatch of generating units vary with the price of carbon emissions and thereby determine the relationship between mitigation cost and emissions reduction.     

Flash Photolysis of Sulfur Dioxide

The body of information presented in this paper is directed to photochemists and air pollution scientists interested in species which result from the interaction of SO₂ and light. When SO₂ at low pressures is subjected to an intense photolysis flash, the characteristic, very structured SO₂absorption spectrum disappears immediately after the flash and is replaced by a continuous absorption. The continuous absorption gradually decays and the normal SO₂ absorption spectrum returns. The initial absorbance of the continuous absorption is proportional to the square of the SO₂ pressure and the square of the flash irradiance. From these facts we propose the formation of a metastable dimer of SO₂ formed by the collision of two excited molecules. Some properties of this dimer are: natural lifetime = 2 sec; energy above separated monomers = 4 kcal; lifetime at atmospheric pressure = 1 sec (quenching coefficients with several foreign gases = 10^-20 cm³/sec molecule); absorption of ultraviolet light results in photode-composition of the dimer into monomeric SO₂. The long lifetime of this species and its low quenching cross section may make it an important intermediate in photochemical reactions of SO₂. The relatively low excitation energy of the metastable species indicates it may also be an intermediate in thermally excited reactions and perhaps an important component of smoke stack effluent.     

Bench-Scale Investigation on Removing Sulfur Dioxide from Flue Gases

The relationship between asbestos consumption and mesothelioma incidence in Connecticut has been investigated.

Asbestos has many industrial applications; however, several of these result in the dissipation of this material (e.g., vehicle brake and clutch lining erosion). In Connecticut, asbestos manufacturing operations contribute approximately 10 tons of airborne asbestos fibers each year, while vehicle brake and clutch lining erosion add another 2 tons. The demolition, especially the “explosive demolition” of buildings which have been fireproofed and/or insulated with asbestos-containing materials may be the most significant future source of asbestos emissions unless adequate precautions are taken.

Occupational asbestos fiber exposure has been known to cause asbestosis, lung cancer, and cancer of the lining of the stomach and lung (mesothelioma) for some time. Recently, the previously rare mesothelial malignancy has been linked to nonoccupational asbestos fiber exposure as well.

There were 133 Conneticut residents diagnosed with mesothelioma between 1935 and 1972. Although subject to diagnostic error, available statistics suggest that the combined sex age-adjusted mesothelioma incidence rate (AAR) per 100,000 Connecticut population has exhibited a possible 10-fold increase since 1935, rising from 0.02 during 1940 to 1949 to 0.25 from 1960 to 1969. The trends for both men and women also showed sharp increases over the same time period (1940 to 1970). The rapid rise in Connecticut's mesothelioma incidence rate closely follows the increase in the State's cumulative asbestos consumption and suggests a linearly increasing cause-effect relationship.     

A Comparison of Conductivity And West-Gaeke Analyses For Sulfur Dioxide

A comparison of the two most common methods used by air pollution control agencies for the analyses of sulfur dioxide is discussed in this paper. Samples were collected simultaneously (502 pairs) for an eight month period at eight sites in the City of Chicago, using the West-Gaeke and conductivity methods. These methods are analyzed statistically to ascertain the existence of a factor describing adequately any differences between methods.     

Sulfur Dioxide Removal and Recovery from Pulp Mill Power Plants

The use of soda ash liquor to scrub SO₂ rich power plant flue gases was studied using an Airetron pilot scrubber with a maximum capacity of 3000 cfm. The relative effects of the major operating variables— temperature, soda ash concentration, and the gas/liquid flow ratio—on the absorption phenomenon were determined. Orthogonal factorial experiments were used to derive a response function relating mass transfer values to operating variables. The economics of a full scale NSSC installation are discussed.     

硫化碱脱除二氧化硫工业烟气的可行性分析

分析了国内外烟气脱硫的研究现状,论述了用硫化碱脱除二氧化硫化工业烟气在理论上和实验上的可能性。     

A Short-Term Air Quality Model for Sulfur Dioxide in Louisville,Kentucky

The conventional gausslan plume equation for ground level concentrations was used to estimate hourly average sulfur dioxide concentrations at selected points in Louisville, KY, on specific days during 1973. Area emission sources were not included in the model since they are not substantial. The trajectory of the emissions from each continuous point source was calculated by a procedure that allowed for spatial variability in wind direction. All other meteorological parameters were held constant during each hour. The twenty-four individual hourly estimates at each location for a given day were arithmetically averaged yielding a daily mean. The model predictions were compared to actual measurements conducted by Jefferson County Air Pollution Control District personnel using the West-Gaeke sampling procedure. The sample correlation coefficient for all predictions was low, but after only about 30% of the predictions were eliminated on statistical grounds, the sample correlation coefficient was increased to 0.72. The statistical analysis appeared to discard a reasonable number of predictions on the basis of observed variability in the measured air quality.     

The Continuous Analysis of Sulfur Dioxide in Gaseous Samples

Sulfur dioxide is quantitatively scrubbed from atmospheric and stack gas samples through the use of a unique rotary scrubber which provides collection efficiencies in excess of 97% in the PPB through PPM range. The scrubber in addition permits the use of water as a scrubbing vehicle which, when combined with a bleached pararosanaline reagent, provides high specificity and sensitivity for the analysis. By the elimination of the tetrachloromercurate solution, cell staining is eliminated and the stability required for continuous analysis by the reagent is achieved.     

Multi-Instrument Performance Evaluation of Conductivity-Type Sulfur Dioxide Analyzers

Three different recording analyzers for sulfur dioxide were operated in parallel under field conditions. Manual sampling for sulfur dioxide using the West-Gaeke procedure supplemented the instrumental evaluation tests. Two of the analyzers were of the continuous-flow type. These were found to give markedly higher readings for SO₂ in the atmosphere (in some cases as much as threefold) than did the other recorder which was sequential-batch or the West-Gaeke manual method.     

Alternative Strategies for Control of Sulfur Dioxide Emissions

Achievement of air quality goals now more than ever requires careful consideration of alternative control strategies in view of national concerns with energy and the economy. Three strategies which might be used by coal-fired steam electric plants to achieve ambient air quality standards for sulfur dioxide have been compared, and the analysis shows that the desired objective can be achieved using the intermittent control strategy with substantially less impact on the environment, less consumption of energy, and at a much lower economic cost than using either stack gas scrubbing or low-sulfur coal.     

Improvement of Ambient Sulfur Dioxide Concentrations by Conversion from Low to High Stacks

A study of the “before” and “after” ground-level S0₂ concentrations near the Muskingum River Plant of the American Electric Power System shows that the conversion from low to high stacks has accomplished marked reductions in ambient concentrations. These reductions are in reasonable agreement with theoretical calculations and are most apparent within 5 km of the source. EPA Standards are now being met in this area despite the presence of the 1440 MW power plant burning 5% sulfur fuel with no treatment of the stack gas.     

A Rapid Titrimetric Method for Sulfate in Lead Dioxide Exposed to Atmospheric Sulfur Pollution

A titrimetric method is described for the analysis of sulfate in lead dioxide candles which have been exposed to atmospheric sulfur pollution. The time taken to analyse one sample is 3 hr. Sixty milliliters of 8% ammonium carbonate solution is used to convert the lead sulfate present on the candle to ammonium sulfate. The solution is filtered lc remove lead dioxide, and an aliquot of the filtrate is heated to remove ammonium carbonate. The solution of ammonium sulfate remaining is titrated directly for sulfate with 0.02 M barium perchlorate, using Thoron as indicator. The accuracy of the method is ±10 and ±6 % of theoretical, for 10 mg, and 40 mg or greater amounts of sulfate, respectively. For 2 mg of sulfate, results are about 20% high. Good agreement has been obtained between results for duplicate field candles, analyzed by the standard sodium carbonate gravimetric method, and the method presented, over a five-month period.