Air Pollution and Health

The use of multistage, dry, fluidized beds of continuously recycled, coal-based activated carbon appears technically and economically attractive for both adsorption of stack gas So₂ and sequential conversion to elemental sulfur. Conceptual design details and economic factors are discussed for the treatment of power plant or oil refinery SO₂ effluents with by-product sulfur recovery.     

Health Effects of Fine Particulate Air Pollution: Lines that Connect

Abstract

Efforts to understand and mitigate the health effects of particulate matter (PM) air pollution have a rich and interesting history. This review focuses on six substantial lines of research that have been pursued since 1997 that have helped elucidate our understanding about the effects of PM on human health. There has been substantial progress in the evaluation of PM health effects at different time-scales of exposure and in the exploration of the shape of the concentration-response function. There has also been emerging evidence of PM-related cardiovascular health effects and growing knowledge regarding interconnected general pathophysiological pathways that link PM exposure with cardiopulmonary morbidity and mortality. Despite important gaps in scientific knowledge and continued reasons for some skepticism, a comprehensive evaluation of the research findings provides persuasive evidence that exposure to fine particulate air pollution has adverse effects on cardiopulmonary health. Although much of this research has been motivated by environmental public health policy, these results have important scientific, medical, and public health implications that are broader than debates over legally mandated air quality standards.     

Some Applications of Microscopy to Air Pollution

The microscope as it has been and is now applied to air pollution work is discussed. A summary of the most common particulate sampling equipment is presented and distinctions as to the area of usage (suspended, or settled particulates) are made in each instance. Actual cases are discussed in which the polarizing microscope was used to determine identities and source of particulate pollutants. Particles from such sources as power plants, feed mills, and combustion sources are discussed and photomicrographs of known samples and unknown particles causing complaints are presented and compared as part of the discussion. References are given which deal with sampling equipment and microscopic analysis of various particulates.     

Some Air Pollution Problems Associated with Agriculture in Texas

A report of some experiences with air pollution problems associated with the cotton ginning industry and the application of agricultural insecticides and herbicides.     

Some Basic Consideration in the Design of an Air Pollution Monitoring System

Quantified air quality and meteorological information provided by an air pollution monitoring system must be geared to the legally prescribed functions of the control agency. The network must be treated as a vital component of the total integrated data system that supports agency activities in air resources management and control. It should be closely interphased with data systems for emission inventory, registration and permits, violations and complaints, fuel use, emission reduction plans, land use, demographic projections, and urban planning. Compatibility with neighboring and statewide or regionwide data systems is essential for coordination of effort, especially under episode conditions.

The network should be planned on three levels, static, semi-automatic, and fully automatic, to provide monthly, daily, and up-to-the-minute measurements, respectively. Optimization of network specifications requires a three-way balance of hardware, control objectives, and agency resources (capital facilities, manpower, funding, etc.), of which the first two are realistically governed by the third.

A monitoring network could serve a wide range of functions, and there are pressures and temptations to cater to all possible users. A number of functions are listed; an order of priority should be determined. Experience shows that far more data tend to be generated than can be analyzed, assimilated, and utilized. Rapid data acquisition and on-line processing capabilities of present-day automatic networks could, without effective planning, result in mountainous backlogs of unassimilated information.

A systems engineering approach to planning will ascertain that preliminary requirements are critically scrutinized, and only genuine requirements that meet the test of constraints (natural environment, economic, legal, social, political constraints, and manpower resources) will be translated into performance specifications. By means of this approach, design characteristics that are extraneous or peripheral to the principal network functions can be identified as low priority luxuries, whereas seemingly expensive items may be justified on the basis of data reliability or long-range savings in operation and maintenance requirements.     

Performance Budgeting for the Public Health Service Air Pollution Program

The Lurgi-MB-Filler collects dust from industrial gases by mechanical means in a dry state. It works in continuous operation at temperatures up to 660°F with high dust collecting efficiencies and a low draft loss. The gas to be cleaned passes through a filter bed consisting of abrasion resisting material such as gravel, etc. The captured dust is removed from the filter bed by a patented vibrating system which shakes the spring supported filter bed containers. Simple design and automatic operation ensure low investment and operating costs and give an economic superiority in the fields of cleaning waste air from clinker coolers, conveyors, crushers, pulverizing mills, driers, and preparation plants.     

Air Pollution Impacts to Some Important Species of Pine

In the past, many species of pine have been severely damaged by acute forms of air pollution associated with ore smelting. More recently, damage to ponderosa pine in the state of Washington has been associated with atmospheric fluoride, and this species in particular has also suffered smog damage in southern California. In the East, white pine has been declining in the vicinity of certain soft-coal-burning power plants, and in one case downwind from an oil-burning power plant: also, throughout the East, an atmospheric oxidant of unknown source has caused a type of needle blight on white pine. Trash burners and city dump combustion have led to the hilling of certain pine species, leaving other intermixed pine species unharmed. Localized damage to white pine from automobile exhaust has been observed. Differences in the susceptibility of neighboring trees of the same species to a given air pollutant have been observed repeatedly.     

Inhalation Transfer Factors for Air Pollution Health Risk Assessment

ABSTRACT

To facilitate routine health risk assessments, we develop the concept of an inhalation transfer factor (ITF). The ITF is defined as the pollutant mass inhaled by an exposed individual per unit pollutant mass emitted from an air pollution source. A cumulative population inhalation transfer factor (PITF) is also defined to describe the total fraction of an emitted pollutant inhaled by all members of the exposed population. In this paper, ITFs and PITFs are calculated for outdoor releases from area, point, and line sources, indoor releases in single zone and multizone indoor environments, and releases within motor vehicles. Typical PITFs for an urban area from emissions outdoors are ~10^-6–10^-3. PITFs associated with emissions in buildings or in moving vehicles are typically much higher, ~10^-3–10^-1.     

Air Pollution Effects of Incinerator Firing Practices and Combustion Air Distribution

A survey of academic programs in air pollution control was made. Results from the 127 schools reporting are tabulated by state. Faculty involved in air pollution instruction are identified. Some conclusions and recommendations are presented.     

An Index of Air Pollution and its Relation to Health

Atmospheric pollution by sulfur oxides is discussed in terms of the sources of the pollutant and the possible methods of control. Possible approaches to control are classified in general categories, including fuel desulfurization, process modifications, and flue-gas desulfurization. Some of the more promising specific possibilities are discussed in relation to the organizations developing them.     

Evaluation of Nationwide Health Costs of Air Pollution and Cigarette Smoking

Total nationwide health costs due to air pollution and cigarette smoking were evaluated by determining the percentages of the total respiratory disease cost for 1970 due to the separate and the synergistic effects of smoking and air pollution. Previous studies known to the authors did not properly account for the well established synergistic effect of smoking and air pollution, and also assumed that the urban factor (ratio of urban incidence to rural incidence) was due primarily or exclusively to air pollution. Recent evidence strongly indicates that air pollution is not the primary cause of the urban factor, although it does make a contribution. Taking a minimum of 10% and a maximum of 50% of the urban factor to be due to air pollution, the total 1970 nationwide health cost due to air pollution was found to be between $62 million and $311 million, and the nationwide health cost due to cigarette smoking was found to be $4.23 billion.