Critical Review of Environmental Forensic Techniques: Part I

A multitude of forensic techniques are available for age dating and source identification, including aerial photography interpretation, corrosion models, the commercial availability of a compound, chemical associations with discrete type processes, chemical profiling, degradation models and contaminant transport models. These techniques, however, are rarely challenged or discussed in the literature relative to the scrutiny encountered in environmental litigation. When introduced as scientific evidence, the governing assumptions and quality of the data are critically evaluated and frequently successfully challenged. The purpose of this paper is to review five types of forensic techniques and discuss their merits so that a user can decide which technique, or combination of techniques, is most appropriate for developing the technical portion of a case.     

Critical Review of Environmental Forensic Techniques: Part II

A multitude of forensic techniques are available for age dating and source identification, including aerial photography interpretation, corrosion models, the commercial availability of a chemical, chemical associations with discrete types of equipment, chemical profiling, degradation models and contaminant transport models. The success of these techniques in environmental litigation and their applicability to a particular fact situation is rarely discussed in the literature. When these techniques are introduced as scientific evidence, their governing assumptions and the adequacy of the underlying data are rigorously scrutinized and often, successfully challenged. The purpose of this paper is to review selected forensic techniques and discuss their merits so that the user can select the technique or combination of techniques most appropriate for the factual elements of the case.     

A Strategy and Methodology for Defensibly Correlating Spilled Oil to Source Candidates

The source of crude oils and petroleum products released into navigable waterways and shipping lanes is not always known. Thus, the defensible identification of spilled crude oils and petroleum products and their correlation to suspected sources is a critical part of many oil spill assessments. Quantitative "fingerprinting" analysis, when evaluated using straightforward statistical and numerical analyses, provides a defensible means to differentiate among qualitatively similar oils and provides the best assessment of the source(s) for spilled oils. Polycyclic aromatic hydrocarbon (PAH) and petroleum biomarker concentration data are a particularly useful quantitative measure that can benefit most oil spill investigations. In this paper the strategy and methodology for correlation analysis that relies upon quantitative gas chromatography/mass spectrometry operated in the selected ion monitoring mode (GC/MS-SIM) is demonstrated in a case study involving 66 candidate sources for a heavy fuel oil spill of unknown origin. The strategy includes identification of 19 chemical indices (out of 45 evaluated) based upon PAH's and biomarkers that were (1) independent of weathering; and (2) precisely measured, both of which are determined by statistical analysis of the data. The 19 chemical indices meeting these criteria are subsequently analysed using principal component analysis (PCA), which helps to determine defensibly the "prime suspects" for the oil spill under investigation. The strategy and methodology described, which combines statistical and numerical analysis of quantitative chemical data, can be adapted and applied to other environmental forensic investigations with the objective of correlating any form of contamination to its suspected sources.     

Application of Aerial Photography and Photogrammetry in Environmental Forensic Investigations

Historical aerial photography can be a powerful tool in environmental forensic investigations. Historical aerial photography is available for many sites from the 1930s on. It is researched and obtained from both public and private sources. Most of the photography consists of vertical stereoscopic film annotated with the date of the photomission. A current photomission can be flown using airborne GPS for precise registration of the photomosaics. The photography is scanned at a very high resolution and registered in a coordinate system using a digital stereoplotter that removes terrain distortion and allows the precise measurement of objects. The digital stereoplotter is used to produce photomosaics and to interpret environmentally significant features in the photography. The accuracy of the environmental interpretations is dependent on the skill and experience of the interpreter as well as the resolution of the photography and quality of the equipment used. The photomosaics are then registered in a geographic information system along with the interpretations of environmentally significant features. In a similar manner, historic maps are scanned and registered into the same coordinate system. The interpreted images and maps form a significant part of the expert report. A computer projection system is used to show the interpreted images at trial.     

Application of Aerial Photography and Photogrammetry in Environmental Forensic Investigations

Historical aerial photography can be a powerful tool in environmental forensic investigations. Historical aerial photography is available for many sites from the 1930s on. It is researched and obtained from both public and private sources. Most of the photography consists of vertical stereoscopic film annotated with the date of the photomission. A current photomission can be flown using airborne GPS for precise registration of the photomosaics. The photography is scanned at a very high resolution and registered in a coordinate system using a digital stereoplotter that removes terrain distortion and allows the precise measurement of objects. The digital stereoplotter is used to produce photomosaics and to interpret environmentally significant features in the photography. The accuracy of the environmental interpretations is dependent on the skill and experience of the interpreter as well as the resolution of the photography and quality of the equipment used. The photomosaics are then registered in a geographic information system along with the interpretations of environmentally significant features. In a similar manner, historic maps are scanned and registered into the same coordinate system. The interpreted images and maps form a significant part of the expert report. A computer projection system is used to show the interpreted images at trial.     

Occurrence of monoethylmercury in the Florida Everglades: Identification and verification

A few studies have reported the occurrence of monoethylmercury (CH₃CH₂Hg⁺) in the natural environment, but further verification is needed due to the lack of direct evidence and/or uncertainty in analytical procedures. Various analytical techniques were employed to verify the occurrence of CH₃CH₂Hg⁺ in soil of the Florida Everglades. The identity of CH₃CH₂Hg⁺ in Everglades soil was clarified, for the first time, by GC/MS. The employment of the recently developed aqueous phenylation-purge-and-trap-GC coupled with ICPMS confirmed that the detected CH₃CH₂Hg⁺ was not a misidentification of CH₃SHg⁺. Stable isotope-tracer experiments further indicated that the detected CH₃CH₂Hg⁺ indeed originated from Everglades soil and was not an analytical artifact. All these evidence clearly confirmed the occurrence of CH₃CH₂Hg⁺ in Everglades soil, presumably as a consequence of ethylation occurring in this wetland. The prevalence of CH₃CH₂Hg⁺ in Everglades soil suggests that ethylation could play an important role in the biogeochemical cycling of Hg.     

Identification of Pollution Source of Cadmium in Soil. Application of Material Flow Analysis and A Case Study in Taiwan (11 pp)

Background Since the 1970s, at least 200 hectares (ha) of farmland has been polluted by the heavy metal cadmium (Cd).Consequently, the Cd pollution has led to contaminate the rice production and caused acute social panic. According to the recent investigation results performed by the Taiwan Environmental Protection Administration (TEPA), it is indicated that most of the Cd pollution incidents in Taiwan resulted from the wastewater discharge of stearate Cd factories. To prevent the Cd pollution incidents from spreading, the TEPA has either forced these factories to close down or assisted them in improving their production processes since the 1980s. Unfortunately, accidental incidents of Cd pollution still emerge in an endless stream, despite the strict governmental controls placed on these questionable factories. Whether this pollution has resulted from undetected or hidden pollution sources stemming from two decades ago or comes from some new source, will be an outstanding issue. Therefore, this study attempts to identify the pollution sources of Cd in soil in Taiwan as well as to find the solution to the above-mentioned, outstanding issue by way of a methodology termed Material Flow Analysis (MFA). Method logy. The MFA has proved to be a useful tool on providing quantitative information of the flow of substances through an economic to an environmental system. Based upon the supply-and-demand theory of MFA, researchers have successfully conducted an overview of the use of materials in many industries, the construction industry being one of these. Therefore, this study tries to establish a set of analytical processes by way of MFA for identifying the pollution source of Cd in soil in Taiwan. In addition, the spirit of Life Cycle Analysis (LCA) technique was also employed to identify the materials, and products should be ignored as a crucial pollution source in this study. Results and Discussion According to the MFA methodology applied in this study and on the basis of related studies performed by Taiwanese governmental authorities, we arrive at the following analysis results: (1) the total amount of Cd from the economic perspective of material and product flow was approximately 441.2 tons; (2) the wastewater directly discharged into irrigation water can be concluded to be the major pollution route of Cd in farmland soil in Taiwan; (3) material plastic stabilizer (cadmium oxide, CdO), Zn-Pd compounds and Cu compounds should be the crucial pollution sources to contaminate environment through the route of wastewater in Cd flow analysis; (4) the crucial pollution sources to contaminate environment through the route of wastewater in Cd flow analysis were five factories, Coin, Jili, Taiwan Dye, Guangzheng and Mingguan, and they were all categorized as stearate Cd industries; (5) the typical source of the Cd pollution in soil in Changhua County through the pollution route of wastewater should be the metal surfacing process industries. Conclusions This study proved that MFA can be a good tool for identifying Cd flow as well as for recognizing the crux of the problem concerning incidents of Cd pollution. This study led to the conclusion that the causal relationship between farmland pollution caused by Cd and stearate Cd factories in Taiwan seemed quite close by way of MFA methodology. In addition, this study also found that the wastewater discharged from a single metal surfacing process factory will not cause remarkable farmland pollution. However, the wastewater simultaneously discharged from a group of pollution factories can result in a significant pollution incident. Recommendations and Outlook This case study is only a small contribution to the understanding of the toxic material flow related to Cd in the environment. This study recommends that Taiwanese governmental authorities should not deal with problems on an ad hoc basis, but should instead deal with Cd pollution problems overall employing control measures. Finally, the more accurate information or data we can collect, the more reliable results we can identify. Therefore, the quality and quantity of related data used in this MFA model should be closely scrutinized in order to ensure the most correct and comprehensive investigation on the toxic material flow.     

Environmental sustainability and the integration of different methods for its assessment

The aim of this paper is to propose a research framework, based on the joint use of three widely used methods: EMergy Evaluation (EME), Ecological Footprint Analysis (EFA) and Greenhouse Gas Inventory (GHGI), that are applied to assess the environmental sustainability of a region. The results of application of these methods to several Italian Provinces enabled us to compare their sustainability, and to test the methods with respect to sustainability requirements at local and global level. The outcomes suggest that the proposed framework provides an organic evaluation of regional systems based on key aspects, such as resources depletion, consumption patterns, waste production and absorption.     

Butachlor Degradation in Tropical Soils: Effect of Application Rate,Biotic-Abiotic Interactions and Soil Conditions

The degradative characteristics of butachlor (N-Butoxymethyl-2-chloro-2′,6′-diethyla- cetanilide) were studied under controlled laboratory conditions in clay loam alluvial (AL) soil (Typic udifluvent) and coastal saline (CS) soil (Typic endoaquept) from rice cultivated fields. The application rates included field rate (FR), 2-times FR (2FR) and 10-times FR (10FR). The incubation study was carried out at 30°C with and without decomposed cow manure (DCM) at 60% of maximum water holding capacity (WHC) and waterlogged soil condition. The half-life values depended on the soil types and initial concentrations of butachlor. Butachlor degraded faster in AL soil and in soil amended with DCM under waterlogged condition. Microbial degradation is the major avenue of butachlor degradation from soils.     

Source identification of copper, lead, nickel, and zinc loading in wastewater reclamation plant influents from corrosion of brass in plumbing fixtures

A natural experiment indicated that a link between the presence and concentration of four elements, copper, lead, nickel, and zinc in the influent to two wastewater reclamation plants to the presence and concentrations of the same four elements in the tap water of residential properties. There were 36 populations of results that were assessed for the normality of their distribution, the difference in their median concentrations, the similarity in the ratios of their median concentrations, and the correlations of the concentrations. The results of this study suggest that brass corrosion is the major source of these four elements in the water reclamation plants influent and that there are two distinct populations of brass sources, those in the early stages of dezincification where the release of the non-copper elements is dominant and those in the later stages where the release of copper dominates and the type of brass that is corroding.     

Application of Automated Mass Spectrometry Deconvolution and Identification Software for Pesticide Analysis in Surface Waters

A new approach to surface water analysis has been investigated in order to enhance the detection of different organic contaminants in Nathan Creek, British Columbia. Water samples from Nathan Creek were prepared by liquid/liquid extraction using dichloromethane (DCM) as an extraction solvent and analyzed by gas chromatography mass spectrometry method in scan mode (GC-MS scan). To increase sensitivity for pesticides detection, acquired scan data were further analyzed by Automated Mass Spectrometry Deconvolution and Identification Software (AMDIS) incorporated into the Agilent Deconvolution Reporting Software (DRS), which also includes mass spectral libraries for 567 pesticides. Extracts were reanalyzed by gas chromatography mass spectrometry single ion monitoring (GC-MS-SIM) to confirm and quantitate detected pesticides. Pesticides: atrazine, dimethoate, diazinone, metalaxyl, myclobutanil, napropamide, oxadiazon, propazine and simazine were detected at three sampling sites on the mainstream of the Nathan Creek. Results of the study are further discussed in terms of detectivity and identification level for each pesticide found. The proposed approach of monitoring pesticides in surface waters enables their detection and identification at trace levels.     

利用复介电常数和BPAT神经网络进行环境监测的可行性研究

土壤中的污染物成分复杂，其含量与复介电常数之间具有很强的非线性关系。以土壤样品复介电常数的实部、虚部分别作为输入，以其含水率、体密度和所含6种已知离子的浓度分别作为输出，建立BP人工神经网络。把吉泰兰地区的土壤样品数据分为训练样本集和检验样本集，网络训练后，其学习效果显示模型的性能很好，检验样本的预测结果也与实测值较好吻合，说明利用复介电常数和BP人工神经网络进行环境监测是一种好的方法。     

Development of Tools for Integrated Monitoring and Assessment of Hazardous Substances and Their Biological Effects in the Baltic Sea

The need to develop biological effects monitoring to facilitate a reliable assessment of hazardous substances has been emphasized in the Baltic Sea Action Plan of the Helsinki Commission. An integrated chemical–biological approach is vitally important for the understanding and proper assessment of anthropogenic pressures and their effects on the Baltic Sea. Such an approach is also necessary for prudent management aiming at safeguarding the sustainable use of ecosystem goods and Services. The BEAST project (Biological Effects of Anthropogenic Chemical Stress: Tools for the Assessment of Ecosystem Health) set out to address this topic within the BONUS Programme. BEAST generated a large amount of quality-assured data on several biological effects parameters (biomarkers) in various marine species in different sub-regions of the Baltic Sea. New indicators (biological response measurement methods) and management tools (integrated indices) with regard to the integrated monitoring approach were suggested.     

Response surface models for the formation of PCDD and PCDF in a pilot plant combustion of MSW

Experimental data on PCDD and PCDF emissions in raw gases from municipal solid waste combustion in a pilot plant were processed by Response Surface models to gain information on process parameter values which minimize both the total PCDD/PCDF concentrations and those of a selected congener group.     

Source Apportionment and Identification of Polycyclic Aromatic Hydrocarbons (PAHs) in Sediment Cores of Selected Creeks in Delta State,Nigeria

Polycyclic aromatic hydrocarbons (PAHs) seasonal variation and sources in Ubeji, Ifie, and Egbokodo Creeks of the Niger Delta, Nigeria, were predicted using diagnostic ratios (DRs) of parent PAHs (Phe/Phe + Ant; Flu/Flu + Pyr; BaA/BaA + Chry, and Ind/Ind + BghiP) and principal component analysis (PCA). A total of 222 sediment core samples were collected during the wet (August 2010) and the dry seasons (January 2011). The samples were dried and Soxhlet extracted; sample extracts were fractionated and analyzed by gas chromatography/flame ionization detection (GC/FID) to identify individual PAHs. The diagnostic PAH ratios revealed that PAHs in the sediment cores at the three creeks, in both seasons, mainly stemmed from the combustion process (pyrogenic sources). Principal component analysis further confirmed that wood-burning, coal combustion, diesel, gasoline-powered vehicular emissions, and petroleum combustion were the dominant contributors of PAHs sources at the sampling location. This study provided information on the origin and sources of PAHs in sediment cores, which may be useful for regulatory actions, environmental quality management, contamination history, and environmental forensic studies.     

Breakthrough Curves Characterization and Identification of an Unknown Pollution Source in Groundwater System Using an Artificial Neural Network (ANN)

Contamination of groundwater constrains its uses and poses a serious threat to the environment. Once groundwater is contaminated, the cleanup may be difficult and expensive. Identification of unknown pollution sources is the first step toward adopting any remediation strategy. The proposed methodology exploits the capability of a universal function approximation by a feed-forward multilayer artificial neural network (ANN) to identify the sources in terms of its location, magnitudes, and duration of activity. The back-propagation algorithm is utilized for training the ANN to identify the source characteristics based on simulated concentration data at specified observation locations in the aquifer. Uniform random generation and the Latin hypercube sampling method of random generation are used to generate temporal varying source fluxes. These source fluxes are used in groundwater flow and the transport simulation model to generate necessary data for the ANN model-building processes. Breakthrough curves obtained for the specified pollution scenario are characterized by different methods. The characterized breakthrough curves parameters serve as inputs to ANN model. Unknown pollution source characteristics are outputs for ANN model. Experimentation is also performed with different number of training and testing patterns. In addition, the effects of measurement errors in concentration measurements values are used to show the robustness of ANN based methodology for source identification in case of erroneous data.     

The Use of the Isotopic Composition of Individual Compounds for Correlating Spilled Oils and Refined Products in the Environment with Suspected Sources

Correlation of crude oils, or refined products, in the environment with suspected sources is typically undertaken through the use of GC and GCMS and in certain cases bulk carbon isotope compositions. However, with crude condensates, or refined products in particular, the absence, or low concentration, of biomarkers precludes their successful use for making unique correlations. An alternative and, sometimes, complimentary technique for correlation of such products is evolving through the use of combined gas chromatography-isotope ratio mass spectrometry (GCIRMS). This approach permits determination of the carbon and hydrogen isotopic composition of individual compounds in the crude oil or refined product to produce isotopic fingerprints for use in correlation studies. In this paper, it is proposed to review applications of GCIRMS to the correlation of various spilled products with their suspected sources in different environments. Whilst not proposing that this technique will replace GC or GCMS; it is proposed that GCIRMS is a very powerful tool to be used in conjunction with GC and GCMS to make such correlations. Although isotopic fractionation has been observed in some of the lighter components such as benzene and toluene, higher carbon numbered compounds, say above C 10 , do not appear to undergo any significant isotopic fractionation as a result of weathering. Furthermore with refined products, isotopic fractionation of the lighter components has the potential to demonstrate the onset of natural attenuation of refined products in the environment.     

2022年度环境工程学科国家自然科学基金申请与资助综述

总结了2022年度国家自然科学基金环境工程学科各类科学基金项目的申请、评审与资助情况,并对资助特征进行了分析。2022年度环境工程学科共计接收项目申请3172项,较2021年增幅11.6%。面上项目、青年科学基金项目、地区科学基金项目共计资助466项,重点项目资助6项,优秀青年科学基金项目资助8项,杰出青年科学基金项目资助5项,创新研究群体项目资助1项,重大项目资助1项。本年度环境工程学科切实落实科学基金深化改革任务,聚焦推动科研范式变革和提升凝练科学问题能力,加强科学基金项目全过程管理,推动了学科创新发展。     

Comparison of Microwave Assisted Extraction with Conventional (Homogenization,Vortexing) for the Determination of Incurred Salinomycin in Chicken Eggs and Tissues

Abstract

Incurred and fortified salinomycin residues were extracted from chicken tissues and eggs by homogenization, vortexing and by microwave assisted extraction. The salinomycin residues were quantitated by liquid chromatography following postcolumn derivatization with either vanillin or 4-dimethylamino-benzaldehyde and detected at 520 or 592 nm, respectively. Comparison of residue data indicated that microwave assisted extraction performed as well as the vortexing technique in extracting salinomycin residues in the tissues of laying chickens that were fed meal containing drugs at various level. In the present study, extracts from homogenizing could not be analyzed directly without clean up. Therefore, microwave assisted extraction appears to be a reliable, reproducible, and economical substitute for routinely used homogenization and vortexing extraction techniques.     

浙江省生态环境可持续发展评价指标体系的建立

生态环境的可持续发展评价是生态安全与生态建设中的重要内容。本研究应用主成分分析法，收集浙江省1990～2000年的数据，对评价指标进行初步筛选．同时采用德尔斐法进行专家咨询，得到评价指标的分层排序。最后从初选的54个评价指标中，根据主成分分析法、专家咨询法的指标筛选结果，结合有关国家及地方生态环境建设规划，建立了由40个指标组成的浙江省生态环境可持续发展评价指标体系。