Closed-loop supply chain system with energy,transportation and waste disposal costs

Energy usage and consumption play important and strategic roles in modern manufacturing, inventory and logistics systems. The literature on inventory models for closed-loop supply chains reveals that, for no clear reasons, energy costs were ignored along with transportation and disposal costs. This paper introduces a closed-loop supply chain model that considers the economic value and energy content of products. It also offers a novel framework for studying lot-sizing policies of production processes in that context. Thus, a mathematical model for a closed-loop supply chain system with energy, transportation and disposal costs is developed. Numerical examples are provided with their results discussed. The developed model was also compared to that of Richter (1996) to stress the importance of accounting for the three noted costs. The numerical results emphasise that accounting for energy, transportation and disposal costs in supply chain modelling increases the sustainability of a production-inventory system due to the strong interdependence of the three costs on one hand, and their relationship to the environment on the other hand.     

A case study on period vehicle routing in a refuse collection system

Period vehicle routing, a multi-period extension of the capacitated vehicle routing problem, is the problem of determining a service combination of each customer as well as the vehicle routes in each period of the planning horizon while satisfying the restrictions on the vehicle capacity and the travel distance (time). The problem can typically be found in refuse collection systems in which end-of-life products or wastes are collected and moved to the facilities where further treatment is taken care of. In this study, we report a case study on the problem for the objective of minimising the fleet size, i.e. the maximum number of vehicles simultaneously required over the planning horizon. To solve the problem, we adopt the two-stage heuristic in which an initial solution is obtained by assigning a service combination to each collection point, and then it is improved by changing the service combination assigned to each collection point. Computational experiment was done on the case data and significant improvement over the conventional method is reported.     

A hybrid model for remanufacturing facility location problem in a closed-loop supply chain

Traditional supply chain design is merely based on the open loop or forward flow of materials, neglecting reverse flow for recovery of materials despite the recent concerns of customers and governments about environmental and production cost reductions. New supply chain design should be closed loop which implements traditional supply chain concepts with reverse flow or a material recovery system to reduce production cost and enhance customer satisfaction about environmental consciousness and to meet legal requirements. In our research, we designed a closed-loop supply chain which consists of recovery options such as collection centres and remanufacturing plants (reverse flow) in addition to traditional supply chain tiers (forward flow), and tried to find the best location for these facilities in a discrete space based on decision makers' opinions. Since there are uncertainties about decision parameters in an uncapacitated facility location problem, we implemented the fuzzy TOPSIS method to solve the location decision problem and find the best place to locate a remanufacturing facility.     

Two-echelon closed-loop supply chain deterministic inventory models in a batch production environment

This paper considers a two-echelon closed-loop supply chain consisting of a manufacturer and a remanufacturer at the upper echelon and a retailer at the lower echelon. The retailer faces a constant demand from customers, which is satisfied through recovered and new products received from the remanufacturer and the manufacturer, respectively. The manufacturer produces the product with finite rate, whereas the recovery of returned product is instantaneous at the remanufacturer. We develop three models to determine the optimal production-inventory policy of the players for minimizing the joint total cost of the system. In the first model, the retailer receives the product in batches from the manufacturer and the remanufacture simultaneously, whereas in the second and third models, the batches are received alternatively. In the third model, however, the procurement of raw material at the manufacturer is also considered. Numerical illustration is presented to examine the impact of certain key parameters.     

“后补贴”时代地方政府新能源汽车补贴策略研究

新能源汽车补贴是政府为了发展新能源汽车产业所采取的一项激励政策。现有文献虽在微观层面上研究了政府补贴对新能源汽车推广的影响,但多将补贴政策限定为固定额度的政府补贴,未考虑中国特殊的两级政府补贴政策尤其是地方政府补贴对新能源汽车推广的影响,且在补贴政策的设计上未与新能源汽车的实际推广目标相结合。基于"后补贴"时代的地方政府既要实现新能源汽车推广目标又要保证补贴政策合理退坡的双重现实要求。本文依据当前中央政府为新能源汽车提供固定补贴,地方政府提供配套比例补贴以及制定价格补贴比例上限的现实情形,综合考虑新能源汽车成本、充电桩建设情况、消费者初始效用、中央政府补贴等因素对地方新能源汽车推广的影响,构建了地方政府为实现既定新能源汽车推广目标的最优补贴策略模型。研究表明:(1)对于不同效用水平的消费者,地方政府价格补贴比例上限和配套比例补贴对新能源汽车零售价格所起的作用不同;(2)地方政府补贴政策只有在小于或等于其最优配套比例或价格补贴比例上限时才会对新能源汽车推广产生正向影响。最后,还结合北京新能源汽车推广的实际情况进行了数值模拟,给出了在不同新能源汽车成本、充电桩建设情况、消费者初始效用下北京市政府为实现新能源汽车推广目标的最优补贴策略。数值模拟结果表明,当前北京新能源汽车存在地方配套比例过高、价格补贴比例上限过高等问题。在后补贴时代,北京市政府可依据新能源汽车成本下降、充电设施逐步完善、消费者初始效用提升等因素变化,对补贴进行适当退坡。数值模拟表明,所构造的最优补贴策略模型对后补贴时代地方政府新能源汽车补贴政策的制定具有较高的参考价值。     

Sustainable supply chain network design: a multicriteria perspective

In this paper, we develop a rigorous modelling and analytical framework for the design of sustainable supply chain networks. We consider a firm that is engaged in determining the capacities of its various supply chain activities, i.e. the manufacturing, storage and distribution of the product to the demand locations. The firm is faced with both capital costs associated with constructing the link capacities and the links' operational costs. Moreover, the firm is aware of the emissions generated associated with the alternative manufacturing plants, storage facilities and modes of transportation/shipment, which may have different levels of emissions due, for example, to distinct technologies of, respectively, production, storage and transportation. The firm is assumed to be a multicriteria decision-maker who seeks to not only minimise the total costs associated with design/construction and operation, but also to minimise the emissions generated, with an appropriate weight, which reflects the price of the emissions, associated with the various supply chain network activities. We provide both the network optimisation modelling framework and an algorithm, which is then applied to compute solutions to a spectrum of numerical sustainable supply chain design examples in order to illustrate our approach.     

双积分政策下异质汽车制造商的产量博弈均衡

文章通过对双积分政策下汽车制造商的产量博弈均衡进行建模分析,研究了双积分政策对企业层面异质制造商的产量决策和利润的影响,以及对产业层面新能源汽车和燃油汽车总产量及总产值的影响。研究结果表明:(1)新能源汽车产业向均衡演进过程中,新能源汽车制造商仍具有一定的发展潜力,但未来发展的中坚力量依靠优势燃油汽车制造商,劣势燃油汽车制造商可能会通过提高燃油经济性发展为优势燃油汽车制造商,从而提高优势燃油汽车制造商的燃油汽车总产量,降低劣势燃油汽车制造商的燃油汽车总产量。(2)双积分政策参数对异质制造商产量决策和利润的影响不同:新能源汽车制造商能够从中受益,而劣势燃油汽车制造商面临危机,转危为安的可能方式包括降低平均燃料消耗量和积极探索新能源汽车生产的可能性。对于优势燃油汽车制造商来说,双积分政策的收紧可能导致其转向燃油汽车市场,规制NEV积分价格上限有利于引导优势燃油汽车制造商转向新能源汽车市场。(3)促进新能源汽车规模增长的参数,可能导致总产值下降,政策调整应将规模增长和产值增长作为双目标,避免单一目标可能导致的市场波动。(4)随着双积分政策的收紧,可预见的新能源汽车积分比例要求提高以及平均燃料消耗量标准趋严,将刺激新能源汽车积分需求提升,缓解新能源汽车积分供需失衡问题。考虑到目前NEV积分价格处于低位,合理降低新能源乘用车车型积分有助于限制NEV积分供给。     

Developing a fuzzy linear programming model for locating recovery facility in a closed loop supply chain

In this research a closed loop supply chain is designed which incorporates reverse logistics and forward logistic system simultaneously. In the design of reverse logistic system, recovery options are embedded in traditional supply chain for treating returned products. The recovery system includes collection centres, remanufacturing plants and disposal centres. Since the product return is supply driven, there is an uncertainty about it. In the proposed configuration for closed loop supply chain, the optimised configuration for supply chain in terms of locating recovery plants is developed. Accordingly, a fuzzy mixed integer linear programming model develops to deal with the uncertainty of returning products by customers. A general-purpose solver (LINGO 8.0) and a Meta heuristic approach (genetics algorithm) are implemented to solve the proposed model. The answers are compared by defining indexes and then the optimal answer, configuration and variables are identified. This solution will suggest a new design of supply chain network in which waste of materials is minimised and the new raw materials are necessary only when the used products may not be recovered by recovery options.     

Eco-efficient cold chain networks design

ABSTRACT

The demand of food distribution across global supply chains is continuously growing and since this kind of deliveries need refrigeration, the growth will enormously increase the energy request and the associated carbon emissions. The aim of this study is to develop a model for the optimisation of eco-efficiency related to a typical refrigerated food distribution network design as a particular case of cold chain. Inventory holding, transportation and energy consumption cost components are included in the model for the evaluation of economic performance of the chain, while energy consumption for storage and transport activities is also considered to contribute to the environmental performance of the chain. In order to model a supply chain related to refrigerated food, the perishability of distributed products is also involved in the model, as it influences storage and distribution activities performances. A novel analytical model is developed for the economic and environmental evaluation of the considered chain. A numerical study that considers different alternative configurations of the distribution network for refrigerated green peas is presented and results are discussed considering the eco-efficiency of different alternatives. Finally, main limitations of the model and future developments are presented and discussed.     

Green product design in a supply chain with considering marketing under competition and coordination

Environment, Development and Sustainability - Environmental sustainability is becoming a leading indicator for evaluating supply chain management. This study considers two players, a manufacturer...     

基于Stackelberg博弈的循环经济闭环产业链研究

为揭示循环经济产业链的内在发展机制,本文基于循环经济产业链的特征建立了闭环产业链模型,利用企业间的Stackelberg博弈分析了消费者、企业和政府间的利益关联以及三大主体最优决策对闭环产业链的影响方式.研究结论表明,消费者的环境偏好越低,政府的环境税标准越低,且环境税的制定空间越小,企业收益越难实现从传统产业链到循环产业链的转移,消费者以新产品的消费弥补环境效用的损失;在政府的全局最优税收情况下,传统产业链的企业在横向企业竞争中仍具有先动优势,并不随环境税增加而改变;政府经济最优废弃物循环率能够保证循环产业链的回收资源供给,但只是在消费者容忍的范围内实现了消费者效用最大化和生产总收益最大化.经济的可持续发展要求废弃物循环率达到生态最优,这需要政府舍弃部分经济利益,实施更严厉的环境税政策约束传统产业链的发展规模,同时结合参与性政策提高公众的环境偏好,以保证循环经济闭环产业链的顺利运行.     

Construction of an optimum system design method considering product lifecycle

This paper proposes an optimum system design method that especially considers product lifecycles and aims to help designers make effective decisions during the product design phase. By considering and estimating all lifecycle factors of cost and environmental impact in addition to the product performance, this method facilitates development of optimum design solutions that incorporate requirements pertaining to the product's entire lifecycle. Furthermore, quantitative estimation of lifecycle factors enables the numerical expression of optimum solutions, rather than depending primarily on experiment and designer intuition. To demonstrate the effectiveness of the proposed method, this paper develops an optimum system design method for a milling machine as an example of a machine product designed for long term use. The lifecycle cost and the lifecycle environmental impact are generally expressed as the summation of each value during manufacturing phase, usage phase, disposal phase and recycling phase. In this example model, Eco-indicator 99 is used to evaluate environmental impact. In the proposed lifecycle design optimisation method, the relationships among the product performance, the lifecycle cost and the lifecycle environmental impact are evaluated as a multi-objective optimisation problem. Analysis of the obtained Pareto optimum solution sets subsequently enables designers to pursue breakthrough product design solutions.     

Design for environment as a tool for the development of a sustainable supply chain

In this work, design for environment (DfE) methodologies have been used as a tool for the development of a more sustainable supply chain. In particular by combining life‐cycle assessment (LCA) techniques and by using the quality function deployment (QFD) multi‐criteria matrices, an ‘environmental compromise’ can be reached. In this work, the QFD matrices have been developed in a new way using an iterative process that involves the whole supply chain starting from the product life‐cycle, taking into consideration the machines that make the product and their components. This methodology is compatible with the requirements of the various stakeholders, suppliers, manufacturers and clients, involved in the supply chain. To assess the validity of the proposed approach a specific supply chain was studied concerning packaging systems for liquid food substances (beverage cartons). Firstly all the stages which are most critical from the environmental point of view in the supply chain of packaging systems were identified and assessed. The starting point for the analysis of environmental aspects and impacts which characterise the supply chain was LCA, which proved to be useful for the identification and the environmental assessment of the various stages in a packaging system. Through the use of ‘iterative QFD’ it is possible to arrive at a definition of the engineering characteristics of all the machinery which is involved in the supply chain. In particular in this work the authors have tried to identify the critical points in the design of those machines which either make the beverage cartons or are involved in the filling process.     

Pricing and coordination of waste electrical and electronic equipment under third-party recycling in a closed-loop supply chain

Waste electrical and electronic equipment have the potential environmental risks and resource value simultaneously. So the product recycling is very important. This paper studies on recycling problems of WEEE under the third-party recycling in a closed-loop supply chain. We take the following measures. Firstly, based on classifying the WEEE, we consider a revenue sharing and cost sharing contract as the coordination mechanism. Secondly, under centralized and decentralized decisions, we use the game analysis technology to determine the optimal pricing and profits, respectively. Finally, we conduct the number simulation to illustrate and validate the proposed models and provide managerial insights. The results show that when retailers sell new and second-hand products simultaneously, consumers become more sensitive to recycling prices, the profits of manufacturers, recyclers and CLSC increase. However, the retailers' profits decline.

     

Simulation planning of power supply capacity: an approach to optimal industrial microgrid operation with carbon emission permits

ABSTRACT

Microgrids integrated with distributed generation provide energy intensive enterprises (EIEs) with a solution to cut down their total system costs. However, unreasonable capacity allocation of power supply in industrial microgrid may result in capacity shortage or excess, thus leading to uneconomical solutions. Considering carbon emission permits and renewable energy access on demand side, this paper analyses and evaluates the long-term impacts of power supply capacity on economic benefits and carbon emission. The power suppliers consist of industrial self-generation, wind power generation and power grid. A HOMER software based industrial microgrid model is designed, and time series simulation of the model for a cycle of 10 years is performed to provide numerical analysis. The simulation results with sensitivity analysis show that optimal capacity planning of power supply can lead to considerable economical and ecological benefits under carbon emission permits; besides, it can also be conducive to peak load shedding for power grid.     

The closed-loop cycle for industrial wastewater: The future pollution solution

The paper discusses the trend in all the U.S. industries toward increased water recycling and reuse. Also presented are the water use demands by various industries, and the water use by functions. Data are given on industrial water quality in use for various functions among selected high water using industries. Presented is an over-all system designed for a closed-loop cycle for industrial wastewater. This will be practical for industry to implement by 1985 or soon thereafter if the required technology is properly developed. Research and development needs to achieve this closed-loop system are identified. Rather than a discussion of economics with typical costs based on amount of water treated or on the specific processes employed, the paper presents data on the total cost of removal of controlling factors from a hypothetical wastewater.Future demands and restrictions on industrial wastewater are stated and ten references are cited.     

Production disruption management for R/M integrated supply chain using system dynamics methodology

The impacts of production disruption in Remanufacturing/Manufacturing (R/M) integrated supply chain on the sales and the methods of production disruption management were studied. A system dynamics model for the R/M integrated supply chain with production disruption was improved by system dynamics methodology. The numerical examples were shown to illustrate the simulation results. The impacts of different recovery times of production disruption on the sales were presented. In order to mitigate the disruption risks and ensure the sales at the needed sales ratio, the methods for setting multi-echelon inventory levels before the occurring of the production disruption and the methods for making back-up plans after the production disruption occurs were given.     

Minimising transportation in manufacturing supply chains

The movement of raw material, work-parts and bought-out components is an essential aspect of modern-day global manufacturing systems. It is also an expensive, non-value adding and pollution-generating activity with many undesirable consequences. These manifest themselves not only in terms of the immediate cost of transportation between suppliers, manufacturers and customers but also in the consequential effect this movement has on human health and the environment. Accordingly, modern manufacturing supply chains should be designed with great care to minimise the amount of movement required both internally within a manufacturing facility's production system and externally between the supplier, manufacturer and customer. In so doing, a good supply chain design minimises the costs associated with the transportation of goods along with the effect this has on the environment. In complex supply chains, however, minimising overall transportation movement for large sets of components is no easy task. Consequently, the contribution contained in this paper seeks to outline a technique whereby an initial supply chain design solution which does so can be identified. The method is explained in the first instance via a straightforward material movement example. The resulting solution is subsequently modified to indicate its application in the context of temporal supply chain design. By utilising this approach, the article emphasises the importance of obtaining a solution that minimises transportation movement within the supply chain together with the practical effects of doing so on flexibility, cost and environmental pollution. In addition, the work required for further development of this technique is outlined and finally suitable conclusions are drawn.     

A dynamic model for assessing radiological consequences of tritium routinely released in rivers. Application to the Loire River

A dynamic model for assessing the transfer of tritium in a food chain was applied to the Loire River, where 14 nuclear power plants situated on five different sites operate. The model considers several potential exposure pathways in the aquatic and terrestrial ecosystems: transfer of tritium through the aquatic food chain (especially fish); use of river water for agricultural purposes (irrigation) and transfer of radionuclides through the terrestrial food chain (vegetables, meat, milk); subsequent internal exposure of humans due to ingestion of contaminated foodstuffs. For biological environmental compartments, the transfer of tritium to organic matter (i.e. OBT) was simulated. For each of the parameters introduced in this model, a probability density function, allowing further uncertainty and sensitivity analyses, was proposed. Uncertainty/sensitivity analyses were performed to determine a confidence interval for the mean annual dose to critical groups and to identify the parameters responsible for the uncertainty and subsequent research priorities.