Removal of organic toxic chemicals using the spent mushroom compost of Ganoderma lucidum

The removal of the organic toxic chemicals di-n-butyl phthalate (DBP), di-2-ethyl hexyl phthalate (DEHP), nonylphenol (NP), and bisphenol-A (BPA) by laccase obtained from the spent mushroom compost (SMC) of the white rot fungi, Ganoderma lucidum, was investigated. The optimal conditions for the extraction of laccase from SMC required using sodium acetate buffer (pH 5.0, solid : solution ratio 1 : 5), and extraction over 3 h at 4 °C. The removal of NP was enhanced by adding CuSO(4) (1 mM), MnSO(4) (0.5 mM), tartaric acid (20 mM), 2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS; 1 mM), and 1-hydroxybenzotriazole (HBT; 20 mg L(-1)), with ABTS yielding a higher NP removal efficiency than the other additives. At a concentration of 2 mg L(-1), DBP, DEHP, NP, and BPA were almost entirely removed by laccase after incubation for 1 day. The removal efficiencies, in descending order of magnitude, were DBP > BPA > NP > DEHP. We believe that these findings could provide useful information for improving the efficiency of the removal of organic toxic chemicals in the environment.     

Sample size for monitoring of toxic chemical sites

The problem of determining sample size for environmental monitoring and assessment is considered. Hypothesis testing is discussed in general terms and in terms of monitoring toxic chemical sites. Competing risks of misclassification of sites are examined within the framework of statistics. Alpha and beta, the probability of making Type I and Type II errors, respectively, are illustrated in the context of environmental monitoring.Sample size formulas and tables are provided for comparing a mean to a standard mean, comparing two means, comparing a proportion to a standard proportion, and comparing two proportions. The formulas and tables consider the size of differences to be detected as well as the probability of Type I and Type II errors.Although the research described in this article has been funded wholly or in part by the United States Environmental Protection Agency through Cooperative Agreement No. CR 810550 to the University of Nevada, Las Vegas, it has not been subjected to the Agency review and therefore does not necessarily reflect the views of the Agency and no official endorsement should be inferred.     

Relevance of radiation compensation litigation to compensation for toxic exposures

Several recent court decisions add to the growing body of law concerning the responsibility of Government in radiation matters and the quantum of proof needed to show causation between radiation exposures and certain types of cancer and leukemia. The courts have also been addressing a wide range of compensation claims for exposures to toxic chemicals with demonstration of causation being a particularly difficult task. Meanwhile, the Congress has been attempting to legislate a far reaching administrative and judicial framework for compensating toxic victims, including an easing of burden-of-proof requirements for demonstrating causation and a broadening of the basis for admissibility of scientific evidence. Drawing parallels between radiation and toxic exposure problems can be both instructive and misleading. Some of the technical issues are quite similar, including the importance of person-specific exposure estimates and of epidemiological studies. However, the uncertainties associated with toxic exposures are usually far greater, and the scientific data base for relating exposures and effects is much more uncertain.     

Excrement from Heron colonies for environmental assessment of toxic elements

Excrement cast from Great Blue Heron nests was collected during the nesting period of 1978 from four colonies in Washington and Idaho. Cheesecloth strips placed on the ground beneath the nests served as excrement collecting devices. Chemical analysis for lead, mercury and cadmium were performed on dried samples. Lead was the most abundant trace metal found in heron debris. The Idaho colony at Lake Chatcolet had an average concentration of 46 ppm in the beneath-nest samples and 6 ppm in control samples. A heron colony near Tacoma, Washington had beneath-nest samples averaging 28 ppm and control samples averaging 20 ppm. Two colonies located in the interior region of Washington had substantially lower concentrations of lead. The difference observed between colonies was attributed to their associations with a polluted watershed (Chatcolet colony) an interstate highway (Tacoma colony) and an unpopulated largely agricultural area (inland Washington).     

Health risk assessment for toxic emissions from a manufacturing facility

This paper presents the risk associated with the release of toxic chemicals from a manufacturing facility, following the State of California's approach to risk assessment. The facility emits five toxic substances from eight stacks. The building downwash is considered during dispersion calculations. The zone of impact, identified using a risk criteria (i.e. excess cancer risk of 10 in a million), is located in the southeast quandrant from the plant. The size of the impact area is 3.3 km². The cancer and non-cancer effects are considered for chromium (VI), benzene, formaldehyde, gasoline vapors, methylene chloride, and selenium using the California Air Pollution Control Officers Association Guidelines. No significant non-cancer effects are found due to the emissions. The maximum calculated risk is 1.197×10^-5 and is an extremely conservative value. Analysis shows that the use of realistic assumptions for exposure duration and unit risk factors during the risk calculations could reduce the zone of impact to 0 km².     

Management of toxic cyanobacteria for drinking water production of Ain Zada Dam

Blooms of toxic cyanobacteria in Algerian reservoirs represent a potential health problem, mainly from drinking water that supplies the local population of Ain Zada (Bordj Bou Arreridj). The objective of this study is to monitor, detect, and identify the existence of cyanobacteria and microcystins during blooming times. Samples were taken in 2013 from eight stations. The results show that three potentially toxic cyanobacterial genera with the species Planktothrix agardhii were dominant. Cyanobacterial biomass, phycocyanin (PC) concentrations, and microcystin (MC) concentrations were high in the surface layer and at 14 m depth; these values were also high in the treated water. On 11 May 2013, MC concentrations were 6.3 μg/L in MC-LR equivalent in the drinking water. This study shows for the first time the presence of cyanotoxins in raw and treated waters, highlighting that regular monitoring of cyanobacteria and cyanotoxins must be undertaken to avoid potential health problems.     

Screening organic chemicals in commerce for emissions in the context of environmental and human exposure

Quantitative knowledge of organic chemical release into the environment is essential to understand and predict human exposure as well as to develop rational control strategies for any substances of concern. While significant efforts have been invested to characterize and screen organic chemicals for hazardous properties, relatively less effort has been directed toward estimating emissions and hence also risks. Here, a rapid throughput method to estimate emissions of discrete organic chemicals in commerce has been developed, applied and evaluated to support screening studies aimed at ranking and identifying chemicals of potential concern. The method builds upon information in the European Union Technical Guidance Document and utilizes information on quantities in commerce (production and/or import rates), chemical function (use patterns) and physical-chemical properties to estimate emissions to air, soil and water within the OECD for five stages of the chemical life-cycle. The method is applied to 16,029 discrete substances (identified by CAS numbers) from five national and international high production volume lists. As access to consistent input data remains fragmented or even impossible, particular attention is given to estimating, evaluating and discussing uncertainties in the resulting emission scenarios. The uncertainty for individual substances typically spans 3 to 4 orders of magnitude for this initial tier screening method. Information on uncertainties in emissions is useful as any screening or categorization methods which solely rely on threshold values are at risk of leading to a significant number of either false positives or false negatives. A limited evaluation of the screening method's estimates for a sub-set of about 100 substances, compared against independent and more detailed emission scenarios presented in various European Risk Assessment Reports, highlights that up-to-date and accurate information on quantities in commerce as well as a detailed breakdown on chemical function are critically needed for developing more realistic emission scenarios.     

Changes in thyroid peroxidase activity in response to various chemicals

Thyroperoxidase (TPO) is a large heme-containing glycoprotein that catalyzes the transfer of iodine to thyroglobulin during thyroid hormone (TH) synthesis. Previously, we established an in vitro assay for TPO activity based on human recombinant TPO (hrTPO) stably transfected into human follicular thyroid carcinoma (FTC-238) cells. It is important to determine whether environmental chemicals can disrupt TPO activity because it is an important factor in the TH axis. In this study, we used our assay to examine the changes in TPO activity in response to various chemicals, including benzophenones (BPs), polycyclic aromatic hydrocarbons (PAHs), and persistent organic pollutants (POPs). Overall, BPs, PAHs, and POPs slightly altered TPO activity at low doses, as compared with the positive controls methimazole (MMI), genistein, and 2,2',4,4'-tetrahydroxy BP. Benzophenone, benzhydrol, 3-methylchloranthracene, pyrene, benzo(k)fluoranthene, benzo(e)pyrene, perfluorooctane sulfonate (PFOS), perfluorooctanoic acid (PFOA), and heptachlor decreased TPO activity, while 2,4-dihydroxy BP, 2,2'-dihydroxy-4-methoxy BP, and dibenzo(a,h)anthracene increased TPO activity. From these data, we can predict the disruption of TPO activity by various chemicals as a sensitive TH end point. TPO activity should be considered when enacting measures to regulate environmental exposure to thyroid-disrupting chemicals.     

Characterisation of particulate matter for toxic metals in ambient air of Kochi City, India

Measurement of respirable suspended particulate matter (RSPM) and analysis of toxic metals in air of Kochi city was carried out for a period of one year, 1997. Seasonal variations of RSPM and toxic metals are analysed to identify the influence of meteorological parameters. The air pollution problem with respect to RSPM and lead is moderately significant especially in winter season. The profile of other toxic metals in RSPM is not much significant. Domestic fuel used mainly coal/wood and petrol/diesel fueled motor vehicles are the major contributors to the RSPM and toxic metals. Various control strategies are delineated for reduction of ambient RSPM and toxic metals in air of Kochi city.     

Inputs of chemicals from recreational activities into the Norwegian coastal zone

Wastewater treatment works effluent is often considered to be one of the most important point sources of a wide range of anthropogenic contaminants to aquatic systems, however, this paper discusses other potential sources. With the aim of establishing the important sources of UV filters, insect repellent and biocides to the aquatic environment, samples were collected from sites with direct (bathing areas and marinas) and indirect (sites receiving wastewater effluent) human influences. Sunscreens containing UV filters are used in large volumes during the summer months and often applied shortly before a person enters the water for swimming activities. The results presented here demonstrate that washing directly from the skin is an important point source of 4 UV filters to the Oslofjord. The insect repellent, diethyl toluamide, was also measured and it was concluded that washing from the skin was not such an important point source into the fjord. Concentrations of the biocide Irgarol 1051 were also measured and were elevated in the small boat marina and surrounding enclosed area. This work demonstrates that man recreational water-based activities are a diffuse source of some contaminants into coastal and fjord environments and this study provides an initial assessment of the levels being released.     

Comparison of three sequential extraction protocols for the fractionation of potentially toxic metals in coastal sediments

In the determination of the best sequential extraction procedures (SEP) for the speciation of metals in sediment samples from the Lagos lagoon system, three sequential extraction procedures were compared for the fractionation of Cd, Cr, Cu, Pb, and Zn. The SEP compared included a modified Tessier??s procedure carried out in five steps, while the two other procedures were the three-step original Community Bureau of Reference (BCR) and the modified BCR techniques (four steps). Quantification of the metal concentration was achieved with a flame atomic absorption spectrophotometer. The results obtained by the three methods were compared, and the modified BCR and Tessier SEP were found to extract more Cu, Cr, Pb, and Zn in the reducible phase and therefore a decrease in the oxidizable phase than the original BCR SEP. The most mobile elements were found to be Cd, Pb, and Zn. These are of environmental concern, as these potentially toxic metals could be easily released into the aquatic environment with consequent ingestion by aquatic organisms, thereby entering the food chain. The mass balance (percent recovery) was found to be between 85% and 115% in most cases. Prior to the comparison, the analytical performance of the laboratory was tested using a secondary reference material, GLAURM, using the three-step modified BCR procedure. The results showed high reliability of the analytical performance of the laboratory for all the metals considered.     

Construction of fuzzy membership functions for urban vehicular exhaust emissions modeling

This paper presents a method for constructing a membership function (MF) for the fuzzy sets that expert systems deal with. This paper introduces a Bezier curve-based mechanism for constructing MFs of convex normal fuzzy sets. The mechanism can fit any given data set with a minimum level of discrepancy. In the absence of data, the mechanism can be intuitively manipulated by the user to construct MFs with the desired shape. MFs have been developed using the proposed mechanism for urban vehicular exhaust emission modeling. It has been observed that all meteorological and vehicular parameters have either S-shaped MFs or Z-shaped MFs. Gaussian MF has been mostly applied for modeling air quality. The present study explored the application of fuzzy MF to analyze air pollution data from vehicular emission. The study reveals that S-shaped and Z-shaped MF can be used in addition to Gaussian MF.     

Combining passive sampling and toxicity testing for evaluation of mixtures of polar organic chemicals in sewage treatment plant effluent

Effluent from sewage treatment plants has been associated with a range of pollutant effects. Depending on the influent composition and treatment processes the effluent may contain a myriad of different chemicals which makes monitoring very complex. In this study we aimed to monitor relatively polar organic pollutant mixtures using a combination of passive sampling techniques and a set of biochemistry based assays covering acute bacterial toxicity (Microtox), phytotoxicity (Max-I-PAM assay) and genotoxicity (umuC assay). The study showed that all of the assays were able to detect effects in the samples and allowed a comparison of the two plants as well as a comparison between the two sampling periods. Distinct improvements in water quality were observed in one of the plants as result of an upgrade to a UV disinfection system, which improved from 24x sample enrichment required to induce a 50% response in the Microtox assay to 84x, from 30x sample enrichment to induce a 50% reduction in photosynthetic yield to 125x, and the genotoxicity observed in the first sampling period was eliminated. Thus we propose that biochemical assay techniques in combination with time integrated passive sampling can substantially contribute to the monitoring of polar organic toxicants in STP effluents.     

Pond bank access as an approach for managing toxic cyanobacteria in beef cattle pasture drinking water ponds

Forty-one livestock drinking water ponds in Alabama beef cattle pastures during were surveyed during the late summer to generally understand water quality patterns in these important water resources. Since livestock drinking water ponds are prone to excess nutrients that typically lead to eutrophication, which can promote blooms of toxigenic phytoplankton such as cyanobacteria, we also assessed the threat of exposure to the hepatotoxin, microcystin. Eighty percent of the ponds studied contained measurable microcystin, while three of these ponds had concentrations above human drinking water thresholds set by the US Environmental Protection Agency (i.e., 0.3 μg/L). Water quality patterns in the livestock drinking water ponds contrasted sharply with patterns typically observed for temperate freshwater lakes and reservoirs. Namely, we found several non-linear relationships between phytoplankton abundance (measured as chlorophyll) and nutrients or total suspended solids. Livestock had direct access to all the study ponds. Consequently, the proportion of inorganic suspended solids (e.g., sediment) increased with higher concentrations of total suspended solids, which underlies these patterns. Unimodal relationships were also observed between microcystin and phytoplankton abundance or nutrients. Euglenoids were abundant in the four ponds with chlorophyll concentrations >?250 μg/L (and dominated three of these ponds), which could explain why ponds with high chlorophyll concentrations would have low microcystin concentrations. Based on observations made during sampling events and available water quality data, livestock-mediated bioturbation is causing elevated total suspended solids that lead to reduced phytoplankton abundance and microcystin despite high concentrations of nutrients, such as phosphorus and nitrogen. Thus, livestock could be used to manage algal blooms, including toxic secondary metabolites, in their drinking water ponds by allowing them to walk in the ponds to increase turbidity.     

Multivariate statistical and GIS-based approaches for toxic metals in tropical mangrove ecosystem,southeast coast of India

The heavy metal concentrations in water and sediment samples were investigated in the tropical Muthupet mangrove ecosystem, southeast coast of India. The results demonstrated that, ranges of metals in water comprise of Cd—0.05 to 3.72; Cu—0.5 to 4.43; Pb—6.31 to 17.87; Zn—0.0 to12.91 ppm and sediment comprises of Cd—0.06 to 0.57; Cu—4.46 to 20.59; Pb—2.90 to 21.35; Zn—4.41 to 39.18 ppm. In all the three sites, heavy metals in sediment exhibited significant higher concentrations compared to water, except Cd. The spatial distribution of metals in water and sediment samples followed a similar pattern except Cd with the preponderance of Zn (75% of total metals) followed by Cu and Pb. Muller’s Geoaccumulation indexes (Igeo) showed Cd is a potent pollutant in the ecosystem and moderately contaminated the study area. The aquaculture and agricultural culture practices follow improper disposal of municipal wastages, and idol immersion activities are the potent metallic sources for heavy metal pollution were identified by performing principle component analysis. In order to protect the ecosystem from further contamination, regular monitoring is needed to in order to control the anthropogenic discharges.

Open image in new window

Graphical abstract