Nutrient baselines of Cerrado low-order streams: comparing natural and impacted sites in Central Brazil

The aquatic systems responsible for water supply in the Brazilian Federal District (FD) have been threatened by anthropogenic pressures, especially considering the expressive demographic increase in the region during the last decades. The purposes of this research were: (a) to assess the water quality in streams located in the FD by monitoring physical–chemical variables; (b) to define baselines for these variables among different ecological status categories. The 14 investigated streams were sampled between 2006 and 2009, in the dry (August–September, 2006, 2008, 2009) and rainy (March–April, 2008, 2009) seasons. All sampling sites were classified in four categories (“very impacted”, “impacted”, “in transition” and “natural”) using an adaptation of a rapid habitat assessment protocol. Differences in water quality among sites were generally well predicted in the four ecological status categories defined by the protocol, which showed a gradient in nutrient concentrations from reference sites classified as “natural” (medians: electrical conductivity?=?7.3 μS cm^?1; nitrate?=?0.040 mg L^?1; ammonium?=?0.039 mg L^?1; soluble reactive phosphorus (SRP)?=?<0.001 mg L^?1; total phosphorus (TP)?=?0.006 mg L^?1; ) to those classified as “very impacted” (medians: electrical conductivity?=?87.7 μS cm^?1; nitrate?=?0.247 mg L^?1; ammonium?=?0.219 mg L^?1; SRP?=?0.010 mg L^?1; TP?=?0.035 mg L^?1). Point sources inputs were the main factor for water quality deterioration. The nutrient baselines reported were relatively low when compared to data collected from reference areas in Brazil (e.g., São Paulo State) or temperate regions, especially for TP.     

Seasonal perspective of dietary arsenic consumption and urine arsenic in an endemic population

Exposure to arsenic in arsenic endemic areas is most remarkable environmental health challenges. Although effects of arsenic contamination are well established, reports are unavailable on probable seasonal variation due to changes of food habit depending on winter and summer seasons, especially for endemic regions of Nadia district, West Bengal. Complete 24-h diets, drinking–cooking water, first morning voided urine samples, and diet history were analyzed on 25 volunteers in arsenic endemic Chakdah block of Nadia district, once in summer followed by once in winter from the same participants. Results depicted no seasonal variation of body weight and body mass index. Arsenic concentration of source drinking and cooking water decreased (p?=?0.04) from 26 μg L^?1 in summer to 6 μg L^?1 in winter season. We recorded a seasonal decrease of water intake in male (3.8 and 2.5 L day ^?1) and female (2.6 and 1.2 L day^?1) participants from summer to winter. Arsenic intake through drinking water decreased (p?=?0.04) in winter (29 μg day^?1) than in summer (100 μg day^?1), and urinary arsenic concentration decreased (p?=?0.018) in winter (41 μg L^?1) than in summer (69 μg L^?1). Dietary arsenic intake remained unchanged (p?=?0.24) over the seasons. Hence, we can infer that human health risk assessment from arsenic needs an insight over temporal scale.     

Stability of lysosomal membrane in Carcinus maenas acts as a biomarker of exposure to pharmaceuticals

The presence of pharmaceuticals in the environment is now a major concern given their potential adverse effects on organisms, particularly human beings. Because the feeding style and habitat of the crab Carcinus maenas make this species vulnerable to organic contaminants, it has been used previously in ecotoxicological studies. Lysosomal membrane stability (LMS) in crabs is a general indicator of cellular well-being and can be visualized by the neutral red retention (NRR) assay. LMS in crab hemolymph has been evaluated as a cellular biomarker of adverse effects produced by exposure to pharmaceutical compounds. Crabs were exposed in the laboratory to four different pharmaceuticals for 28 days in a semistatic 24-h renewal assay. Filtered seawater was spiked every 2 days with various concentrations (from 0.1 to 50 μg·L^?1) of caffeine, ibuprofen, carbamazepine, and novobiocin. Results showed that NRR time, measured at day 28, was significantly reduced (p?<?0.05) after exposure to environmental concentrations of each pharmaceutical (caffeine?=?15 μg·L^?1; carbamazepine?=?1 μg·L^?1; ibuprofen?=?5 μg·L^?1; and novobiocin?=?0.1 μg·L^?1) when compared with control organisms. The predicted “no environmental effect” concentration/measured environmental concentration results showed that the selected pharmaceuticals are toxic at environmental concentrations and need further assessment. LMS monitoring in crabs is a sensitive tool for evaluating exposure to concentrations of selected drugs under laboratory conditions and provides a robust tier 1 testing approach (screening biomarker) for rapid assessment of marine pollution and environmental impact assessments for analyzing pharmaceutical contamination in aquatic environments.     

Extraction of ultra traces of polychlorinated biphenyls in aqueous samples using suspended liquid-phase microextraction and gas chromatography-electron capture detection

This study reports the feasibility of applying directly suspended liquid-phase microextraction (DSLPME)-gas chromatography detection for the pre-concentration and determination of low levels of eight polychlorinated biphenyls (PCBs) in aqueous samples. The technique requires minimal sample preparation, analysis time and solvent consumption and represents significant advantages over conventional analytical methods. The experimental parameters such as salt content, sample temperature, stirring rate, extraction time, micro-drop volume and breakthrough volume were investigated and found to have significant influences on DSLPME. Under the optimal experimental conditions, the enrichment factor ranged from 578 to 729, and the recovery was above 93 %. Calibration curves possessed good linearity (R ²?>?0.99) over a wide concentration range of 0.1–10.0 μg L^?1 with limits of detection ranging from 0.01 to 0.07 μg L^?1. The relative standard deviations for 1.0 μg L^?1 of PCBs in water by using internal standard were in the range 2–14 % (n?=?3). The proposed simple, accurate and sensitive analytical method was applied successfully to the determination of trace amounts of PCBs in water samples.     

Single drop microextraction and gas chromatography–mass spectrometry for the determination of diflufenican, mepanipyrim, fipronil, and pretilachlor in water samples

An analytical method for the determination of diflufenican, mepanipyrim, pretilachlor, and fipronil in water samples was developed using single drop microextraction in the direct immersion mode and gas chromatography–mass spectrometry. A factorial fractionated design of type 2^6–1 at two levels was performed, to study the influence of experimental variables such as ionic strength, pH, agitation speed, extraction time, drop volume, and sample volume. To establish the optimal conditions for the variables that were significant, a Doehlert design was performed. The optimum conditions of extraction were 1 μL of heptane immersed in 4.0 mL of sample with continuous agitation at 500 rpm for 30 min at room temperature. The developed method proved to have good linearity for the range studied. The detection limits were 0.07 μg L^?1 for diflufenican, 0.03 μg L^?1 for mepanipyrim, 0.08 μg L^?1 for pretilachlor, and 1.39 μg L^?1 for fipronil. The method was validated on river water samples, showing the absence of matrix effect and recoveries ranged from 90.1 to 107.8 %. The results show that the method developed is accurate, sensitive, rapid, simple, and low cost, so it is recommended for application in the analysis of these different classes of pesticides in water samples.     

Selenium in surface and irrigation water in the Kendrick irrigation district, Wyoming

High selenium (Se) concentrations have been found in surface waters in the Kendrick Reclamation Project, Wyoming. Precipitation and irrigation water moving over seleniferous soils are contributing causes, and drought may exacerbate this. This study surveyed Se concentrations and discharges in local surface streams, irrigation drains, and the delivery canal. Sites were sampled monthly and analyzed for Se and total suspended solids (TSS). A completely randomized design with two factors (soil parent material and location, inside or outside irrigation district) was used. Mean Se concentrations were 64 μg L^???1 inside the irrigation district on shale soils, 17 μg L^???1 inside the district off shale soils, 5 μg L^???1 outside the district on shale soils, and 3 μg L^???1 outside the district off shale soils. Correlations between discharge and Se concentrations were generally negative, while correlations between discharge and Se load were generally positive. There was little correlation between load and concentration, and little correlation between TSS and Se. A comparison of Se concentrations in streams and drains showed Se concentrations were significantly higher (p?<?0.001) in streams during the irrigation season, but not in the off-season (p?=?0.515). We conclude that higher discharges decrease Se concentration, but increase load. Conversion from flood to sprinkle irrigation may increase Se concentrations by reducing discharge, but decrease Se loads going into the N. Platte River, and will likely alter the timing and magnitude of flows. Both load and concentration should be considered when implementing Se regulations and standards.     

Hazard assessment of metals in invasive fish species of the Yamuna River,India in relation to bioaccumulation factor and exposure concentration for human health implications

Monitoring of heavy metals was conducted in the Yamuna River considering bioaccumulation factor, exposure concentration, and human health implications which showed contamination levels of copper (Cu), lead (Pb), nickel (Ni), and chromium (Cr) and their dispersion patterns along the river. Largest concentration of Pb in river water was 392 μg L^?1; Cu was 392 μg L^?1 at the extreme downstream, Allahabad and Ni was 146 μg L^?1 at midstream, Agra. Largest concentration of Cu was 617 μg kg^?1, Ni 1,621 μg kg^?1 at midstream while Pb was 1,214 μg kg^?1 at Allahabad in surface sediment. The bioconcentration of Cu, Pb, Ni, and Cr was observed where the largest accumulation of Pb was 2.29 μg kg^?1 in Oreochromis niloticus and 1.55 μg kg^?1 in Cyprinus carpio invaded at Allahabad while largest concentration of Ni was 174 μg kg^?1 in O. niloticus and 124 μg kg^?1 in C. carpio in the midstream of the river. The calculated values of hazard index (HI) for Pb was found more than one which indicated human health concern. Carcinogenic risk value for Ni was again high i.e., 17.02?×?10^?4 which was larger than all other metals studied. The results of this study indicated bioconcentration in fish due to their exposures to heavy metals from different routes which had human health risk implications. Thus, regular environmental monitoring of heavy metal contamination in fish is advocated for assessing food safety since health risk may be associated with the consumption of fish contaminated through exposure to a degraded environment.     

Impacts of climate-induced changes on the distribution of pesticides residues in water and sediment of Lake Naivasha, Kenya

This study reports evidence of increased chlorpyrifos contamination in sediment and water in Lake Naivasha following its intensive application in the horticultural farms in the catchment area. Analytical results show that levels of chlorpyrifos residues were influenced by climate-induced rainfall pattern with higher levels reported during period of heavy precipitation with significant decrease during low rainfall. On average, the levels ranged between 14.8 and 32.8 ng g^?1 in sediment during rainy season compared to a range of 8.5–16.6 ng g^?1 in the dry season. Additionally, the mean concentration of chlorpyrifos in water ranged between 8.61 and 22.4 μg L^?1 during rainy season and below detection limit (bdl) ?13.6 μg L^?1 in dry season as quantified by enzyme-linked immunosorbent assay. Meanwhile, independent t test analysis indicated that there was significant difference in concentration at p?≤?0.05 between the seasons with respect to sediment and water samples. This demonstrated that climate-induced variations had considerable influence on contamination. While diazinon and carbofuran were equally applied intensively, their levels were below the detection limit in the all the samples analyzed. ELISA results were validated by the capillary-HPLC photodiode-array detector instrument analysis, and statistical comparison showed no significant difference between them. It was evident that chlorpyrifos residues determination in water and sediment by ELISA can be a useful strategy in environmental management and monitoring program, and a complimentary analytical tool to high performance liquid chromatography. Levels of chlorpyrifos detected in sediment and water were found to exceed recommended criteria for protection of aquatic life and preservation of water quality and may be hazardous if not regularly monitored.     

Removing arsenic from groundwater in Cambodia using high performance iron adsorbent

In Cambodia, groundwater has been contaminated with arsenic, and purification of the water is an urgent issue. From 2010 to 2012, an international collaborative project between Japan and Cambodia for developing arsenic-removing technology from well water was conducted and supported by the foundation of New Energy and Industrial Technology Development Organization, Japan. Quality of well water was surveyed in Kandal, Prey Veng, and Kampong Cham Provinces, and a monitoring trial of the arsenic removal equipment using our patented amorphous iron (hydr)oxide adsorbent was performed. Of the 37 wells surveyed, arsenic concentration of 24 exceeded the Cambodian guideline value (50 μg L^?1), and those of 27 exceeded the WHO guideline for drinking water (10 μg L^?1). Levels of arsenic were extremely high in some wells (>1,000–6,000 μg L^?1), suggesting that arsenic pollution of groundwater is serious in these areas. Based on the survey results, 16 arsenic removal equipments were installed in six schools, three temples, two health centers, four private houses, and one commune office. Over 10 months of monitoring, the average arsenic concentrations of the treated water were between 0 and 10 μg L^?1 at four locations, 10–50 μg L^?1 at eight locations, and >50 μg L^?1 at four locations. The arsenic removal rate ranged in 83.1–99.7 %, with an average of 93.8 %, indicating that the arsenic removal equipment greatly lower the risk of arsenic exposure to the residents. Results of the field trial showed that As concentration of the treated water could be reduced to <10 µg L^?1 by managing the As removal equipment properly, suggesting that the amorphous iron (hydr)oxide adsorbent has high adsorbing capacity for As not only in the laboratory environment but also in the field condition. This is one of the succeeding As removal techniques that could reduce As concentration of water below the WHO guideline value for As in situ.     

Assessment of cylindrospermopsin toxin in an arid Saudi lake containing dense cyanobacterial bloom

This study reports the presence of the cyanobacterial toxin cylindrospermopisn (CYN) and its producer Cylindrospermopsis raciborskii for the first time in Saudi freshwater sources. C. raciborskii was found in Gazan Dam Lake water with two morphotypes (coiled and straight). The appearance and cell density of this species was significantly positively related to high temperature and high ammonium concentrations, and negatively with nitrate and phosphate concentrations in the lake. Intracellular concentrations of CYN (4–173 μg L^?1) were associated with C. raciborskii rather than other cyanobacteria with a maximal value obtained in June 2011, coinciding with the highest bloom of this species (19?×?10⁷ trichome L^?1). CYN cell quotas (0.6–14.6 pg cell^?1) varied significantly along the study period and correlated with most environmental factors. The results of ELISA and liquid chromatography-mass spectrometry proved that the CYN production by strains of this species was isolated from this lake during the present study, with an amount reaching 568 μg g^?1. Extracellular CYN was also detected in cell-free lake water at concentrations 0.03–23.3 μg L^?1, exceeding the drinking water guideline value of 1 μg L^?1 during the Apr–Jul period. As this lake is an important source for drinking and irrigation waters, CYN monitoring should be included in the environmental and health risk assessment plans of these water bodies.     

Insecticide residues in soil and water in coastal areas of vegetable production in Togo

Some common organochlorine, organophosphorus and pyrethroid insecticides were analysed in agricultural soil samples (n?=?35) and surface water and groundwater samples (n?=?25) collected from coastal areas of vegetable production in Togo. Analytical methods included solvent extraction of the insecticide residues and their subsequent quantification using GC-ECD. δ-HCH, heptachlor epoxide, 4,4-DDE, endosulphan (α, β and sulphate), lambda-cyalothrin and chlorpyrifos were found in the soil samples with concentrations that varied from non-detectable (ND) to 26.93 μg kg^?1 dry weight. For water samples, heptachlor epoxide, 2,4-DDD, 4,4-DDD, 4,4-DDE and endosulphan (α, β, and sulphate) were found at contamination levels that varied from ND to 0.116 μg L^?1. The concentration of insecticide residues detected in the water samples was below the limits set by the World Health Organization (WHO) and also by the European Union (EU), with the exception of the concentration of endosulphan sulphate at the Aného site, which was 0.116 μg L^?1.     

<Emphasis Type="Italic">Mazzaella laminarioides</Emphasis> and <Emphasis Type="Italic">Sarcothalia crispata</Emphasis> as possible bioindicators of heavy metal contamination in the marine coastal zone of Chile

The suitability of Mazzaella laminarioides and Sarcothalia crispata as heavy metal biomonitors of Cd, Cu, Hg, Pb, and Zn was assessed by comparing bioaccumulation of these elements in different life stages and frond sizes in samples from three locations, San Vicente Bay (industrial area), Coliumo, and Quidico (the latter as a reference station), where different degrees of heavy metal pollution are recorded. Bioaccumulation and bioconcentration factors of Cd, Cu, Hg, Pb, and Zn were evaluated. The two macroalgae species showed similar patterns, with higher values of Cu, Hg, Pb, and Zn in polluted areas. M. laminarioides bioaccumulated higher concentrations of all metals assessed than S. crispata, independent of life stage and frond size. The results also showed significantly higher Cu, Hg, Pb, and Zn concentrations (p < 0.05) in water samples from San Vicente Bay than those measured in Coliumo and Quidico. Concentrations of Cd, Hg, Pb, and Zn in San Vicente Bay and Cd, Hg, and Pb in Coliumo and Quidico exceed the mean values considered to represent natural concentrations (Cu = 3.00 μg L^?1; Zn = 5.00 μg L^?1; Pb = 0.03 μg L^?1; Cd = 0.05 μg L^?1; Hg = 0.05 μg L^?1); however, the concentrations recorded do not cause negative effects on the growth and survival of macroalgae. The assessment of heavy metals bioaccumulated in M. laminarioides and S. crispata, particularly Hg, Pb, and Zn, offers a reliable approach for pollution assessment in rocky intertidal environments. Cu and Cd concentrations in seawater samples from San Vicente and Coliumo Bays were significantly higher than in those from Quidico (p value < 0.05); no significant differences in Cd concentrations were observed between San Vicente and Coliumo Bays (p < 0.05). Exceptionally, Cd is bioaccumulated at high levels independent of its availability in the water, thus reaching high concentrations in control areas. High concentrations of metals like Cu and Zn may limit or inhibit Cd uptake in macroalgae, since the transport channels are saturated by some metals, reducing the accumulation of others. These macroalgae species offer good potential for the development of suitable heavy metal pollution survey tools in rocky intertidal environments.     

A very sensitive flow-injection spectrophotometric determination method for iron (II) and total iron using 2′, 3, 4′, 5, 7-pentahydroxyflavone

In this study, an ultra-sensitive and highly selective, rapid flow-injection spectrophotometric method for the determination of iron (II) and total iron has been proposed. The method was based on the reaction between iron (II) and 2′, 3, 4′, 5, 7-pentahydroxyflavone in slightly acidic solution with a strong absorption at 415 nm. The carrier solution used was 1?×?10^?5 M 2′, 3, 4′, 5, 7-pentahydroxyflavone in 0.1 M HAc/Ac^? buffer solution at pH 4.5. Parameters that affect simultaneously the determination of iron (II) and interfering ions were tested. The relative standard deviation for the determination of 50 μg L^?1 iron (II) was 0.85 % (n?=?10), and the limit of detection (blank signal plus three times the standard deviation of the blank) was 3 μg L^?1, both based on injection volumes of 20 μL. The method has been successfully applied to the determination of iron (II) and total iron in water samples and ore samples. The method was verified by analysing a certified reference material Zn/Al/Cu 43XZ3F.     

Spatial and seasonal distribution of 17 endocrine disruptor compounds in an urban estuary (Mondego River,Portugal): evaluation of the estrogenic load of the area

The Mondego River estuary demonstrates signs of pollution, but the levels of endocrine disrupting compounds (EDCs), such as the natural (17β-estradiol and estrone) and pharmaceutical (17α-ethynylestradiol) estrogens, xenoestrogenic industrial pollutants (4-octylphenol, 4-nonylphenol, and their mono- and diethoxylates and bisphenol A), phytoestrogens (formononetin, biochanin A, daidzein, and genistein), and sitosterol were either poorly or never measured in this area. Thus, to conclude about the influx of EDCs in this estuary, water samples were taken every 2 months, during 1 year (2010) in low tide, at eight sites distributed along the estuary. Water samples (1 L) were preconcentrated in the Oasis HLB cartridges and cleaned in silica cartridges before their analysis by GC-MS. In summer, potentially hazardous amounts of estrogens (≈26 ng L^?1), alkylphenols (≈11.5 μg L^?1), alkylphenolethoxylates (≈13 μg L^?1), and phytoestrogens (≈5.6 μg L^?1) were measured. These data suggest that changes in the hydrodynamics of the estuary coupled with the increase of water temperatures interfere with the amount of EDCs in the water. Complementary physicochemical parameters also point to high levels of anthropogenic pollution in this area. Globally, the estrogenic load, expressed in ethynylestradiol equivalents, attained 71.8 ng L^?1 demonstrating that, all together, the measured EDCs pose important health risks for both biota and humans.     

Application of cold-induced aggregation microextraction as a fast,simple, and organic solvent-free method for the separation and preconcentration of Se(IV) in rice and various water samples

The developed method is based on cold-induced aggregation microextraction of Se(IV) using the 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid as an extractant followed by spectrophotometry determination. The extraction of Se(IV) was performed in the presence of dithizone as the complexing agent. In this method, a very small amount of 1-butyl-3-methylimidazolium hexafluorophosphate was added to the sample solution containing Se-dithizone complex. Then, the solution was kept in a thermostated bath at 50 °C for 4 min. Subsequently, the solution was cooled in an ice bath and a cloudy solution was formed. After centrifuging, the extractant phase was analyzed using a spectrophotometric detection method. Some important parameters that might affect the extraction efficiency were optimized (HCl, 0.6 mol L^?1; dithizone, 4.0?×?10^?6 mol L^?1; ionic liquid, 100 μL). Under the optimum conditions, good linear relationship, sensitivity, and reproducibility were obtained. The limit of detection (LOD) (3S_b/m) was 1.5 μg L^?1, and the relative standard deviation (RSD) was 1.2 % for 30 μg L^?1 of Se(IV). The linear range was obtained in the range of 5–60 μg L^?1. It was satisfactory to analyze rice and various water samples.     

Coupling of solvent-based de-emulsification dispersive liquid–liquid microextraction with high performance liquid chromatography for simultaneous simple and rapid trace monitoring of 2,4-dichlorophenoxyacetic acid and 2-methyl-4-chlorophenoxyacetic acid

A simple, rapid, and efficient sample pretreatment technique, based on solvent-based de-emulsification dispersive liquid–liquid microextraction (SD-DLLME), followed by high performance liquid chromatography (HPLC) has been developed for simultaneous preconcentration and trace detection of 2,4-dichlorophenoxyacetic acid (2,4-D) and 2-methyl-4-chlorophenoxyacetic acid (MCPA) in water and urine samples. Some parameters such as acidity of solution, the amount of salt, type, and volume of extraction solvents, type of disperser/de-emulsifier solvent, and its volume were investigated and optimized. Under optimum extraction conditions, the limits of detections (LODs) of this method for MCPA and 2,4-D were 0.2 and 0.6 μg L^?1 (based on 3S_b/m) in water and 0.4 and 1.6 μg L^?1 in urine, respectively. Furthermore, dynamic linear range of this method for MCPA and 2,4-D was 1–300 and 2–400 μg L^?1, repectively. Finally, the applicability of the proposed method was evaluated by extraction and determination of the herbicides in urine and different water samples.     

Flow injection online spectrophotometric determination of uranium after preconcentration on XAD-4 resin impregnated with nalidixic acid

In this work, spectrophotometer was used as a detector for the determination of uranium from water, biological, and ore samples with a flow injection system coupled with solid phase extraction. In order to promote the online preconcentration of uranium, a minicolumn packed with XAD-4 resin impregnated with nalidixic acid was utilized. The system operation was based on U(VI) ion retention at pH 6 in the minicolumn at flow rate of 15.2 mL min^?1. The uranium complex was removed from the resin by 0.1 mol dm^?3 HCl at flow rate of 3.2 mL min^?1 and was mixed with arsenazo III solution (0.05 % solution in 0.1 mol dm^?3 HCl, 3.2 mL min^?1) and driven to flow through cell of spectrophotometer where its absorbance was measured at 651 nm. The influence of chemical (pH and HCl (as eluent and reagent medium) concentration) and flow (sample and eluent flow rate and preconcentration time) parameters that could affect the performance of the system as well as the possible interferents was investigated. At the optimum conditions for 60 s preconcentration time (15.2 mL of sample volume), the method presented a detection limit of 1.1 μg L^?1, a relative standard deviation (RSD) of 0.8 % at 100 μg L^?1, enrichment factor of 30, and a sample throughput of 42 h^?1, whereas for 300 s of the preconcentration time (76 mL of sample volume), a detection limit of 0.22 μg L^?1, a RSD of 1.32 % at 10 μg L^?1, enrichment factor of 150, and a sampling frequency of 11 h^?1 were reported.     

Occurrence and distribution of polycyclic aromatic hydrocarbons in surface microlayer and subsurface seawater of Lagos Lagoon,Nigeria

Polycyclic aromatic hydrocarbons (PAHs) in surface microlayer (SML) and subsurface water (SSW) of Lagos Lagoon were investigated using gas chromatography-electron capture detector (GC-ECD) technique to ascertain their occurrence and spatial distribution, origin, enrichment, and carcinogenicity. Total PAH (ΣPAH) concentrations ranged from 9.10 to 16.20 μg L^?1 in the SML and 8.90 to 13.30 μg L^?1 in the SSW. ΣPAH concentrations were relatively higher in the SML than the underlying SSW samples. The enrichment factors (EFs) of ΣPAHs ranged from 0.76 to 1.74 while the EFs of the individual PAHs varied from 0.50 to 2.09. In general, the EFs values calculated in this study were consistent or slightly less than the EFs reported for similar coastal seawater ecosystems. A correlation between the EFs of fluoranthene and pyrene indicated a positive significant value (R?=?0.9828, p?<?0.0001, n?=?6). Source analyses using the phenanthrene/anthracene and fluoranthene/pyrene ratios indicated the dominance of petrogenic-derived PAHs. Furthermore, enhanced concentrations of BaP (strong carcinogenicity) in SML and SSW samples, which resulted in higher EFs, could pose serious ecological and human health risks.     

Investigating toxic metal levels in popular edible fishes from the South Durban basin: implications for public health and food security

Contamination of the ocean by heavy metals may have ecosystem-wide implications because they are toxic even if present in trace levels, and the relative ease of their bioaccumulation by marine organisms may affect human health, primarily through consumption of contaminated fish. We evaluated metal concentrations in six different popular edible fish species and estimated the potential health risks from consumption of contaminated fish. There was no correlation between fish length and average metal accumulation although the fish species tended to accumulate significantly more Al and Zn (P?<?0.05) than any of the other metals. Significantly higher Mn concentrations were found in fish gills compared to other body parts in all fish species. Bronze seabream, Catface rockcod, and Slinger seabream had significantly higher mean Cr concentration in the liver than in either the tissues or gills. The highest concentration of Zn in fleshy tissue was in Horse mackerel (56.71 μg g^?1) followed by Bronze seabream (31.07 μg g^?1). Al levels ranged from 5.6 μg g^?1 in Atlantic mackerel to 35.04 μg g^?1 in Horse mackerel tissue while Cu and Cr concentrations were highest in the tissues of Horse mackerel (6.83 and 1.81 μg g^?1, respectively) followed by Santer seabream (3.15; 1.09 μg g^?1) and Bronze seabream (3.09; 1.30 μg g^?1), respectively. The highest tissue concentration of Mn was detected in Bronze seabream (8.23 μg g^?1) followed by Catface rockcod (6.05 μg g^?1) and Slinger seabream (5.21 μg g^?1) while Pb concentrations ranged from a high of 8.44 μg g^?1 in Horse mackerel to 1.09 μg g^?1 in Catface rockcod. However, the estimated potential health risks from fish consumption as determined by the target hazard quotient (THQ) and hazard index (HI) were significantly lower than 1, implying that metals were not present in sufficiently high quantities to be of any health and/or food and security concern in the studied fishes.     

The use of rapidly synergistic cloud point extraction for the separation and preconcentration of trace amounts of Ni (II) ions from food and water samples coupling with flame atomic absorption spectrometry determination

A novel improved preconcentration method known as rapidly synergistic cloud point extraction (RS-CPE) was established for nickel preconcentration and determination prior to its determination by flame atomic absorption spectrometry. In this work, the traditional CPE pattern was changed and greatly simplified in order to be applicable in metal extraction and detection. This method was accomplished in room temperature in 1 min. Non-ionic surfactant Triton X-114 was used as extractant. Octanol worked as cloud point revulsant and synergic reagent. The various parameters affecting the extraction and preconcentration of nickel such as sample pH, 2,2′-Furildioxime concentration, amounts of octanol, amounts of Triton X-114, type of diluting solvent, extraction time, and ionic strength were investigated and optimized. Under optimal conditions, the calibration curve showed an excellent linearity in the concentration range of 2–200 μg L^?1, and the limit of detection was 0.6 μg L^?1 for nickel. The developed method was successfully applied for the determination of nickel in food and water samples. The results showed that, the proposed method can be used as a cheap, rapid, and efficient method for the extraction and preconcentration of nickel from real samples.