Analysis of polychlorodibenzo-p-dioxins and dibenzofurans (PCDDs/PCDFs) in baked-salt food additives in Korea

Thirty-one samples of baked-salt products used in commercial food additives were analyzed for the presence of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs). Dioxins were highly detected in 12 samples of baked salts. The amount of dioxins found in the samples ranged from 12.47 pg/g to 406.56 pg/g (0.71 pg TEQ/g to 23.51 pg TEQ/g, respectively). The most abundant congeners, as TEQ values, were 2,3,4,7,8-PeCDF; 1,2,3,7,8-PeCDF; and 1,2,3,4,7,8-HxCDF in PCDF congeners and 1,2,3,7,8-PeCDD; 1,2,3,6,7,8-HxCDD; and 1,2,3,7,8,9-HxCDD in PCDD congeners. Meanwhile, PCDDs/PCDFs were analyzed in high-temperature-treated samples of natural sea salt alone and natural sea salt to which di-(2-ethylhexyl)phthalate (DEHP) had been added. In the former case, PCDD/PCDF formation was most evident at temperatures near 450 degrees C, the total amount of dioxins was 90.07 pg/g (6.07 pg TEQ/g), and PCDD congeners comprised less than 50% of the total PCDDs/PCDFs. However, when the latter samples were heated, the total PCDD/PCDF concentration was 512.30 pg/g (21.53 pg TEQ/g), with PCDD congeners comprising over 87% of the total PCDDs/PCDFs.     

Investigations into the PCDD contamination of topsoil,river sediments and kaolinite clay in Queensland,Australia

Recent findings of elevated PCDDs from an unknown source in the coastal marine environment of Queensland, Australia has instigated further investigations into the distribution of, and environments associated with the PCDD contamination. This study presents data for OCDD concentrations in the coastal, mountainous and inland environment of Queensland. Additionally, full 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins and dibenzofuran (PCDD/F) profiles from different land-use types and environments in the coastal region were analysed. Distinct east–west gradients were detected in topsoil collected from various bushland regions with elevated OCDD concentrations confined to the coastal region. However, PCDD/F results from topsoil and river sediments collected in the Queensland coastal region suggest that elevated OCDD concentrations cannot be attributed to any of the environments, land-use or industry types investigated. PCDD/F congener profiles from select samples were remarkably similar to those previously described in marine sediments collected along the entire Queensland coastline. In addition, kaolinite clay samples from Queensland exhibited elevated OCDD concentrations, and PCDD/F profiles in these samples were similar to those detected in kaolinite clays elsewhere. Natural formation processes have been hypothesised as the source of elevated PCDDs in Queensland and other locations, where similar PCDD/F profiles and the general lack of anthropogenic sources are evident. This study presents additional data supporting this hypothesis and provides further information that may assist in the identification of the processes involved in the natural formation of PCDDs.     

PCDD/F and PCB history in dated sediments of a rural lake

Concentrations of polychlorinated dibenzo-p-dioxins (PCDD), dibenzofurans (PCDF) and biphenyls (PCB) were analysed from a sediment core, which had been sampled from a remote lake in Finland. The deepest subsamples were analysed from a depth of 4.0 m, and were more than 8000 years old. At the surface of the sediment core, low levels of industrial background contamination were detected. The sum of 2,3,7,8-substituted PCDD/Fs was 35 ng/kg d.w. (dry weight), or 1.2 ng/kg d.w. in WHO's toxicity equivalent, WHO-TEQ. The annual accumulation rate of 2,3,7,8-substituted PCDD/Fs was 1.26 ng m(-2) a(-1). Deeper in the core, PCDD/F concentrations ranged between 2.11 and 11.1 ng/kg d.w. (0.24 and 1.70 ng/kg d.w. WHO-TEQ) and the accumulation rate was 0.11 ng m(-2) a(-1). A characteristic PCDD/F congener profile was found in all pre-industrial sediment layers. The order of concentrations was OCDD > 1,2,3,4,6,7,8-HpCDD > 1,2,3,7,8,9-HxCDD > 1,2,3,4,7,8-HxCDD > 2,3,7,8-TCDD, and concentrations of 2,3,7,8-chlorinated dibenzofurans were below the detection limit. Similar congener profiles have previously been described in samples for which natural PCDD/F formation has been proposed. PCBs were present at low levels in all of the sediment samples. The sum of the PCB concentrations of the sediment subsamples ranged between 50 and 2540 ng/kg d.w., and the three predominant congeners in the core were PCBs 18, 52, and 110.     

Evaluation of PCDD/Fs characterization in animal feed and feed additives

Safety control of feed and feed additives is necessary to have safe food of animal origin. Based on media reports, nine incidents regarding dioxins and/or PCBs contaminations occurred worldwide during the last decade. Korea is a country which imports feed and feed additives. In this study, various kinds of feed and feed additives were analyzed to monitor the contamination level of dioxins. The level of PCDD/Fs in fish oil was the highest with a concentration of 23.33ngkg(-1), which is equivalent to a toxicological concentration of 4.68ngWHO-TEQ/kg. Feed from animals origin such as chicken meal, animal fat, fish meal, fish oil, and shell powder showed relatively higher concentrations of PCDD/Fs. Feed from plants origin, minerals, and additives ranged from non-detects for bit pulp and ethoxyquin to 8.28ngkg(-1) for dl-methionine. From a toxicological point of view, the highest concentration in vitamins was 0.08ngWHO-TEQ/kg among the feed additives. 2,3,4,7,8-PeCDF was the dominant congener in samples of fish oil, fish meal, and shell powder. Animal fat showed that the pattern of PCDD/Fs depends on the sources of contamination. A sample of animal fat showed 1,2,3,4,7,8-HxCDF and the other sample showed 1,2,3,4,7,8-HxCDD as a primary congener. Generally, low levels of PCDDs were detected in feed additives. Patterns of PCDD/Fs in choline chloride were different with that in choline chloride from an incident in Europe in 2000.     

Novel evidence for natural formation of dioxins in ball clay

Elevated concentrations of dioxins in ancient ball clay from the Mississippi Embayment suggest natural formation of dioxins in the environment. Evidence for such natural formation in ball clay derives from unique congener profiles in undisturbed ancient clay deposits and from the lack of other anthropogenic contaminants. Here we present novel evidence of natural formation of dioxins based on congener-specific carbon isotopic analysis of octachlorodibenzo-p-dioxin (OCDD) in ball clays from the USA and Japan. The analyses were performed using a combination of double-column high performance liquid chromatography clean-up and two-dimensional gas chromatography-isotope ratio mass spectrometry. Elevated concentrations of OCDD found in ball clays from the USA and Japan were isotopically distinguished from the anthropogenic source materials (fly ash and pentachlorophenol) and environmental samples (sediment and soil). The isotopic signatures and the occurrence of OCDD in ancient ball clays deposited in the Tertiary Era provide evidence for the in situ formation of dioxins.     

Environmental release of dioxins from reservoir sources during beach nourishment programs

In late 1990s, USEPA/FDA made an important connection regarding the presence of elevated levels of dioxins (e.g., 1500 ng kg⁻¹ TEQ) in ball clays mined in Mississippi (USA) from a geological deposit dated to ∼40 million years (Mississippi Embayment) that stretches over several states (northern part of Mississippi to Kentucky) and levels of dioxins in selected animal food sources. Following a recent beach nourishment program along the mid-Atlantic coast of the US, a number of dark gray, blue tinted nuggets of varying sizes were found on beach strands and near the shoreline. Using the presence of these balls of clay (shape, color, and knowledge regarding their use in pottery) on the beach, together with our direct experience analyzing ball clays for dioxins, we made a possible association between these clays and elevated dioxins. Concerns regarding the potential of nourishment programs to cause severe damage to our beaches drove us to test the dioxin content of nourishment exposed clays. A number of the nuggets, along with freshly dredged and deposited sand (collected the morning after nourishment) with the same coloration, and others (sun-bleached), collected approximately 2 weeks after the completion of the nourishment efforts, were analyzed for the presence of PCDD/Fs, PCBs, and selected semi-volatile chlorinated organics. The clay PCDD/F WHO2005-TEQs (dry weight; ND = DL; EMPC = EMPC) ranged from 0.41 to 5.78 ng kg⁻¹ with an average of 2.64 ng kg⁻¹, whereas the sand sample’s TEQs ranged from 0.18 to 0.31 ng kg⁻¹ PCDD/F WHO-2005, with an average of 0.22 ng kg⁻¹. The average total tetra- through octachlorinated dibenzo-p-dioxin concentration was 2700 ng kg⁻¹ (with a maximum of 5800 ng kg⁻¹) for the clays and 8.5 ng kg⁻¹ (with a maximum of 16.8 ng kg⁻¹) for the sand samples. The congener 2,3,7,8-TCDD (TEF = 1) was detected in half of the clay samples (0.11-0.77 ng kg⁻¹). All of the clay and sand samples displayed an unambiguous and dominating 1,4,6,9-chlorination pattern across homolog groups. No other chlorinated aromatics were detected above background levels. The observations, along with the absence or an extremely low level of polychlorinated dibenzofurans, together with the mineralogical analysis, supports the conclusion that off-shore dredging activities are reaching reservoir sources containing dioxin-tainted, smectic/kaolinite clay minerals. Subsequent beach erosion provides additional environmental releases over time, as buried balls of clay from previous nourishment efforts become exposed.     

Levels of PCDDs and PCDFs in Korean river sediments and their detection by biomarkers

Polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) are a group of toxic halogenated aryl hydrocarbons inducing various physiological disorders against biological organisms. Here, we investigated their levels in sediment samples taken from 12 different rivers in Korea. The levels of PCDD/PCDFs in sediment samples were expressed as concentrations and international TEQ values. Among 17 PCDD/PCDFs selected as target compounds in this study, the 1,2,3,4,7,8-HxCDD and OCDD were found in all river sediments with significant variation in various congener profiles of PCDD/PCDFs in sediments. PCDD/PCDFs could be monitored by sensitive biomarkers using insect immune system. Out of 12 river sediment samples, the biomarkers reported four spots (up, middle, and down Singil sites and Ansan) as putative contamination areas. When comparing both chemical and biological monitoring results, two methods agreed three spots of Singil as contamination areas (above 10ppt levels) as well as six river sediment samples as relatively less-contaminated areas, but differed in the results in Ansan and Miho, probably due to relative non-specificity of biomarkers. Despite some disparity between bio- and chemical monitoring results, the biomarkers can be recommended as a device warning the contamination of dioxins in the environment because of a fast and inexpensive detection method.     

Formation of polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) from a refinery process for zinc oxide used in feed additives: a source of dioxin contamination in Chilean pork

The Republic of Korea found dioxin at concentrations exceeding the Korean maximum residue limit (MRL) in pork (2 pg TEQ g⁻¹ fat) imported from Chile in June 2008. Korea and Chile collaborated and investigated to find out the sources of contamination. An isotope dilution method and high resolution gas chromatography/mass spectrometry (HR-GC/MS) were used for the analysis of PCDD/Fs. PCDD/Fs were found from 2.17 to 36.7 pg TEQ g⁻¹ fat from Chilean pork. 2,3,4,7,8-PeCDF, 1,2,3,4,7,8-HxCDF, 1,2,3,6,7,8-HxCDF, and 2,3,4,6,7,8-HxCDF were found as the major congeners in pork samples. 2,3,4,7,8-PeCDF showed the highest concentration and contributed about 30% among the congeners in most of the samples. 2,3,7,8-TCDD, 1,2,3,7,8,9-HxCDD, OCDD, 2,3,7,8-TCDF, 1,2,3,7,8-PeCDF, 1,2,3,7,8,9-HxCDF, and OCDF were not detected or exist at background levels in the less contaminated samples. Remarkably high concentrations of PCDD/Fs were found in samples of zinc oxide (17 147 pg TEQ g⁻¹), zinc oxide based premix (6673 pg TEQ g⁻¹), and the residue crust (800 pg TEQ g⁻¹) in a mixing chamber in the feed mill. From the results of various investigations, this case concluded that zinc oxide in the feed was the major source of the dioxin contamination in pork. The dioxins were formed from a metal refinery process to collect zinc oxide.     

Release of polychlorinated dibenzo-p-dioxins and dibenzofurans by setting off fireworks.

Selected pyrotechnic articles were set off under laboratory conditions. Residues and vapors of smoke as well as unburnt charges were analyzed for polychlorinated dibenzo-p-dioxins, dibenzofurans (PCDD/F) and their precursors chlorinated benzenes and phenols. The contamination of the selected products with these organic xenobiotics proved to be very variable. Remains of fireworks contained octachlorinated dioxins and furans up to 142 ng I-TEQ/kg as well as hexachlorobenzene in the range of 0.05 to 1,400 mg/kg. The deflagration of detonating compositions usually resulted in a dispersion of contaminants, whereas continuously burning flare compositions partially led to a thermal decomposition of organic pollutants. A significant rate of formation of polychlorinated dioxins and furans was observed when setting off blue-lightning rockets and fountains. Further investigations revealed that even high temperatures during the deflagration of black powder charges could not suppress the formation of PCDD/F from appropriate precursors.     

PCDD/F formation from oxy-PAH precursors in waste incinerator flyash

The yield of PCDD/F in relation to the presence of oxygenated PAH in model waste incinerator flyash has been investigated in a fixed bed laboratory scale reactor. Experiments were undertaken by thermal treatment of the model flyash at 250 and 350 °C under a simulated flue gas stream for 2 h. After reaction, the PCDD/F content of the reacted flyash and the PCDD/F released into the exhaust gas, and subsequently trapped by XAD-II resin in a down-stream condensation system were analyzed. The PAHs investigated were, dibenzofuran and benzo[b]naphtho[2,3-d]furan and were spiked onto the model flyash as reactant precursors for PCDD/F formation. The results showed significant formation of furans from both of the PAH investigated, however except from some highly chlorinated dioxin congeners, the formation of dioxins was not so common. Benzonaphthofuran was significantly more reactive than dibenzofuran in PCDD/F formation, in spite of the fact that dibenzofuran is structurally more similar to that of PCDD/F. Thus, there was no clear attribution between the chemical structure of PAH used and the formation of PCDD/F. There were considerable differences between the yields of PCDD/F congeners in the gaseous species and those in the reacted flyash under the same operational conditions. The concentration of PCDD/Fs was reduced at the higher reaction temperature of 350 °C; however, the higher temperature resulted in the majority of the PCDD/F formed on the flyash being released into the gas phase.     

Combined approaches to determine the impact of wood fire on PCDD/F and PCB contamination of the environment: a case study

Fires might be the source of persistent organic pollutants (POPs) such as dioxins, furans (PCDD/Fs) and/or polychlorobiphenyls (PCBs) in the environment. In the perspective of defining legal responsibilities a thorough characterization of the impact of such an event should be carried out. However, such characterization is not easy as the environment integrates both local and diffuse sources of such molecules. Thus, a combined approach, which includes gathering field surveys, modeling and laboratory experiments, should be conducted. The objective of this work is to illustrate different approaches to give sufficient insight to determine the actual impact of wood fire on the environment. The work was carried out at the vicinity of a burnt down parcel. The fired material was a mixture of wood and PCB-contaminated soils as the site was a former pyralene-disposal site. Modeling, soil and lichen sampling and experimental combustion were carried out to delineate the contamination for each chemical and to define the area within the fire that was responsible for the environmental contamination. Concentrations of PCDD/F and PCBs were very high on the burnt plot. The combined approach determined that the furans were the predominant compounds in the smoke emitted by the fire. Based on this tracer, it was possible to demonstrate that in terms of environmental contamination of PCDD/F, the impact of the fire was restricted to a 2 km radius from the burnt down plot. For PCBs, no specific tracer was identified. In this case, the delineation of the impact could only be empirical, based on the total concentration of the chemicals.     

Heavy metals, PCDD/F and PCB in sewage sludge samples from two wastewater treatment facilities in Rio de Janeiro State, Brazil

Two sewage sludge samples collected from an urban as well as a rural area in Brazil and one sludge sample originating from the city of Balingen, Baden-Württemberg, South Germany, were investigated in respect to contamination with heavy metals, PCDD/F and PCB. The results were compared to PCDD/F and indicator-PCB mean values found in the region of Baden-Württemberg. The observed toxicity equivalents of PCDD/F found in the Brazilian samples, were below the upper limit specified by German legislation for final disposal or agricultural use in soils. Both the PCB and heavy metal values exceeded this limit. The PCDD/F congener/homologue profiles found in the Brazilian samples indicated that the urban sewage sludge shows a contamination where both chlorophenols and depositional sources appear to be contributing to the contamination pool. The enrichment of highly chlorinated PCDD/F groups in the sludge of semi-rural origin is probably due to transport phenomena effects. For the German sludge sample, depositional sources seem to be the main PCDD/F contamination pathway. Regarding PCB, both Brazilian samples show a homologue profile that indicates a contamination stemming from technical PCB formulations like Clophen A50 and Clophen A60 or equivalent.     

PCDD/F formation from oxy-PAH precursors in waste incinerator flyash

The yield of PCDD/F in relation to the presence of oxygenated PAH in model waste incinerator flyash has been investigated in a fixed bed laboratory scale reactor. Experiments were undertaken by thermal treatment of the model flyash at 250 and 350 °C under a simulated flue gas stream for 2 h. After reaction, the PCDD/F content of the reacted flyash and the PCDD/F released into the exhaust gas, and subsequently trapped by XAD-II resin in a down-stream condensation system were analyzed. The PAHs investigated were, dibenzofuran and benzo[b]naphtho[2,3-d]furan and were spiked onto the model flyash as reactant precursors for PCDD/F formation. The results showed significant formation of furans from both of the PAH investigated, however except from some highly chlorinated dioxin congeners, the formation of dioxins was not so common. Benzonaphthofuran was significantly more reactive than dibenzofuran in PCDD/F formation, in spite of the fact that dibenzofuran is structurally more similar to that of PCDD/F. Thus, there was no clear attribution between the chemical structure of PAH used and the formation of PCDD/F. There were considerable differences between the yields of PCDD/F congeners in the gaseous species and those in the reacted flyash under the same operational conditions. The concentration of PCDD/Fs was reduced at the higher reaction temperature of 350 °C; however, the higher temperature resulted in the majority of the PCDD/F formed on the flyash being released into the gas phase.     

Decontamination trends in the aquacultured fish gilthead seabream (Sparus aurata) after feeding long-term a PCDD/F spiked feed

Aquacultured fish gilthead seabream (Sparusaurata), previously exposed to low levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) trough the diet for a 13 months period, were fed on a clean feed for another 22 months. Gilthead seabream is a protandrous hermaphrodite species and this “decontamination” period coincided with the stages of sex differentiation, maturity and reproduction of the fish. PCDD/F levels in the fish tissues (i.e. muscle, liver, perivisceral fat and gonads), expressed in pg WHO-TEQ g⁻¹ fresh weight, showed a general decreasing trend during the “decontamination” period. However, this general trend varied among tissues and was also dependent on sex and lipid contents. Toxicological effects affecting fish behaviour and hepatic marker responses were also evaluated. The results pointed out that exposure to PCDD/Fs did not have an impact on fish development and reproduction, since the proportion of sexes found after the sex reversal process was within the normal range described for this species. In addition, long-term exposure to low PCDD/F levels did not significantly affect the response of most of the biochemical markers considered. On the contrary, some of them (e.g. EROD activity) showed variations in their responses during the sex differentiation process and onwards. Finally, the hepatic AhR mRNA levels increased during dioxin exposure but they returned to values typical for non-exposed fish after the “decontamination” period.     

Sources of dioxins in the United Kingdom: the steel industry and other sources

Several countries have compiled national inventories of dioxin (polychlorinated dibenzo-p-dioxin [PCDD] and polychlorinated dibenzofuran [PCDF]) releases that detail annual mass emission estimates for regulated sources. High temperature processes, such as commercial waste incineration and iron ore sintering used in the production of iron and steel, have been identified as point sources of dioxins. Other important releases of dioxins are from various diffuse sources such as bonfire burning and domestic heating. The PCDD/F inventory for emissions to air in the UK has decreased significantly from 1995 to 1998 because of reduced emissions from waste incinerators which now generally operate at waste gas stack emissions of 1 ng I-TEQ/Nm3 or below. The iron ore sintering process is the only noteworthy source of PCDD/Fs at integrated iron and steelworks operated by Corus (formerly British Steel plc) in the UK. The mean waste gas stack PCDD/F concentration for this process is 1,2 ng I-TEQ/Nm3 based on 94 measurements and it has been estimated that this results in an annual mass release of approximately 38 g I-TEQ per annum. Diffuse sources now form a major contribution to the UK inventory as PCDD/Fs from regulated sources have decreased, for example, the annual celebration of Bonfire Night on 5th November in the UK causes an estimated release of 30 g I-TEQ, similar to that emitted by five sinter plants in the UK.     

Formation of chlorinated and brominated dioxins and other organohalogen compounds at the pilot incineration plant VERONA

Experiments were conducted at the VERONA pilot plant, an incineration plant with stationary grate and separate post-combustion chamber, using wood and propane as basic combustible materials and with controlled dosage of various bromine-, chlorine- and copper-containing compounds. The behaviour of the following compounds was studied in the combustion chamber, after the post-combustion chamber and after the heat exchanger: polychlorinated phenols (PCPh), polybrominated phenols (PBrPh), polychlorinated benzenes (PCBz), polybrominated benzenes (PBrBz), polychlorinated dioxins and furans (PCDD/F) and polybrominated dioxins and furans (PBDD/F). The bromine co-incineration leaded to very high bromophenol concentrations after the post-combustion chamber. The formation of brominated and mixed-halogenated phenols and the further reaction to halogenated dioxins is apparently a relevant reaction mechanism for dioxin formation in processes involving bromine. This assumption is supported by the high formation rates of PBDD/F found in the heat exchanger, which were 4-20 times higher than those of PCDD/F. Moreover, the strong correlations found between the formation rates of PCPh, PCBz and PCDD/F in the heat exchanger indicate that in addition considerable new formation of dioxins takes place through de novo synthesis. Experiments involving the variation of primary operational parameters and fuel properties have shown that the quality of post-combustion plays a much greater role than the other parameters. Furthermore, it became apparent that the congeners of the chlorophenols and of the chlorobenzenes, measured in various incineration stages, do not correlate closely with the dioxin concentrations after the heat exchanger.     

Determination of anthropogenic boundary depth in industrially polluted soil and semi-quantification of heavy metal loads using magnetic susceptibility

This study focuses on magnetic susceptibility processing and analysis towards fast and cost-efficient discrimination and semi-quantification of anthropogenic heavy metal loads in soil. Spatial variability of magnetic susceptibility was investigated on sets of soil cores from both “polluted” and “less polluted” forest soil close to a steel mill near Leoben, Austria. Test sites of ∼10 m² represent “site scale” dimensions. Statistical analysis of magnetic data provides a boundary depth indicating the transition from the “polluted” to the deeper, “unpolluted” zone in contaminated natural soil. Introduction of a block master curve simplifies the complex variations of individual curves, and represents magnetic susceptibility at “site scale”. For linking the block master curve to heavy metals we only require magnetic susceptibility data from one soil core and heavy metal data from two sub-samples from the same core. Our optimized magnetic susceptibility data processing scheme provides an applicable tool to semi-quantify anthropogenic heavy metal loads in soil.     

Levels of PCDDs, PCDFs and PCBs in Belgian and international fast food samples

Congener-specific analyses of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) were performed on twenty-eight non-pooled fast food samples collected in Belgium, Switzerland, Czech Republic, United States of America and Australia. PCDD/F and PCB concentrations for the four investigated types of meals were very low. PCDD/F values ranged from non-detected to 1.40 pg WHO-TEQ/g fat and from 0.79 to 2.08 pg WHO-TEQ/g fat for lower and upper bound, respectively. Major contributors to the PCDD/F TEQ were 1,2,3,4,7,8-HxCDD, 1,2,3,6,7,8-HxCDD, 2,3,7,8-TCDF and 2,3,4,7,8-PeCDF. The relative contribution of PCBs to the total TEQ was 68%. For adults, an average estimated intake was 6.7 pg WHO-TEQ/kg bw/month, including consumption of all types of analyzed meals, representing 9.5% of the PTMI. For child, a value of 14.5 pg WHO-TEQ/kg bw/month was obtained, representing 20.6% of the PTMI.     

Levels and possible sources of PCDD/PCDF in sediment and pike samples from Swedish lakes and rivers. (Part one)

One goal of the Swedish survey project is to discover possible sources of PCDD/F. Bottom sediment and pike were sampled at various sites near different types of industries along the coast line of two lakes and one river. The results show background levels of PCDD/F in some lakes which can only be explained by atmospheric input. In some lakes paper mill emissions of chlorinated PCDD/F give high levels of local contamination (≈1 ng/g IG) within short distances (<1 km) from the source. PCDD/F from paper mill effluents are transported long distances and traces can be detected over the entire lake area. The PCDD/F levels in pike are correlated with levels in the underlying sediment.     

Microbial degradation of chlorinated dioxins

Polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF) were introduced into the biosphere on a large scale as by-products from the manufacture of chlorinated phenols and the incineration of wastes. Due to their high toxicity they have been the subject of great public and scientific scrutiny. The evidence in the literature suggests that PCDD/F compounds are subject to biodegradation in the environment as part of the natural chlorine cycle. Lower chlorinated dioxins can be degraded by aerobic bacteria from the genera of Sphingomonas, Pseudomonas and Burkholderia. Most studies have evaluated the cometabolism of monochlorinated dioxins with unsubstituted dioxin as the primary substrate. The degradation is usually initiated by unique angular dioxygenases that attack the ring adjacent to the ether oxygen. Chlorinated dioxins can also be attacked cometabolically under aerobic conditions by white-rot fungi that utilize extracellular lignin degrading peroxidases. Recently, bacteria that can grow on monochlorinated dibenzo-p-dioxins as a sole source of carbon and energy have also been characterized (Pseudomonas veronii). Higher chlorinated dioxins are known to be reductively dechlorinated in anaerobic sediments. Similar to PCB and chlorinated benzenes, halorespiring bacteria from the genus Dehalococcoides are implicated in the dechlorination reactions. Anaerobic sediments have been shown to convert tetrachloro- to octachlorodibenzo-p-dioxins to lower chlorinated dioxins including monochlorinated congeners. Taken as a whole, these findings indicate that biodegradation is likely to contribute to the natural attenuation processes affecting PCDD/F compounds.