废水自动监测系统核查要点解析

在废水自动监测工作日益得到重视与普及的背景下,一些企业存在侥幸心理,不严格按规范运行废水自动监测系统,导致监测结果失去真实性。因此,监测人员应针对相应情况,提高监测能力,保证监测结果的真实性。文章分别从现场核查内容、相关材料、在线监测设备运行、治污设施运行工况四个方面,详细说明废水自动监测过程中要注意的关键点,并重点阐述了废水自动监测系统核查的内容和要点,列举了一些核查实例进行解析。     

建设项目竣工环境保护设施验收监测常见问题与解决办法

本文就建设项目竣工环境保护设施验收监测工作中存在的一些问题,从验收监测方案的制定、验收监测期间生产工况的确定、监测仪器设备的校准标定、监测报告的编制等几个方面进行了阐述。并探讨了解决问题的办法。     

新疆环境应急监测中存在的问题及对策初探

在概述了环境应急监测在突发事件处置中的重要作用的基础上,分析了突发事故环境应急监测中存在的一些问题,并对此提出了一些建议和对策。     

以监测网深化环境监测工作

本文根据多年从事监测工作的体会和对各类监测站的调查研究,评述了当前地方监测工作和行业、企业监测工作中存在的一些问题,提出了用切实运转的监测网来深化和开拓监测工作的建议,并对监测网的组建和运转作了较为可行的建议和设想。     

石油炼制项目竣工环保验收监测检查常见问题

根据建设项目竣工环境保护验收监测相关标准规范要求和实践经验,总结了石油炼制项目竣工环境保护验收监测实践工作中的若干常见问题。根据石油炼制项目污染物来源和特点,分析了加热炉废气监测、恶臭VOCs治理、含油污水监测、防渗措施和地下水监测以及污水处理"三泥"(含油污泥、气浮浮渣、剩余的废活性污泥)和碱渣处置等常见重点难点问题,在此基础上提出了一些对策和建议,为今后开展验收监测检查工作提供借鉴。     

关于废水中污染物浓度日均值的思考

在环境污染防治工作从污染物浓度控制逐步向排污总量控制转变的过渡阶段 ,污染物浓度日均值仍然发挥着十分重要的作用。文章阐述了日均值的监测时段、监测频率及计算方法等技术要求 ,并结合排污总量监测 ,提出了一些建议     

固定污染源废气中氟化物监测的探讨

废气固定污染源氟化物监测已有方法标准,但在实际工作中仍会遇到一些现有标准未具体规定但又严重影响监测结果的问题。文章主要针对固定污染源废气中氟化物监测时采样管的选择以及在高湿烟气中的测试进行了一些探讨,对实际工作具有指导作用。     

重点工业污染源监督监测管理若干问题

剖析了重点工业污染源监督监测管理在报表法律效力、重点源筛选、监测手段、信息采集和审核、利用等方面存在的若干问题、并就这些问题提出了一些对策。     

全球POPs监测计划实施进展及我国开展POPs监测实践

持久性有机污染物(POPs)因其具有高毒性、持久性以及远距离迁移性而引起国际社会的广泛关注,各国家和地区持续开展了一系列POPs监测活动。文章介绍了国际上一些影响重大的区域和跨区域POPs监测计划及其特点,并结合国内外POPs监测进展,提出我国开展POPs监测的对策与建议。     

农药类建设项目竣工环境保护验收监测工作中的几点思考

针对农药类建设项目行业特点,梳理了在竣工验收监测应关注的重点内容包括确定验收范围、理清项目实际建设发生的变化、把握特征污染监测等,并对一些常遇到的问题提出了解决对策。     

湿法水雾除尘技术在机立窑窑尾烟气治理上的应用

机立窑窑尾烟气在治理上有一定难度,湿法水雾除尘技术的应用取得了一些进展。     

浅谈县级环境监测质量管理工作现状及对策

当前环保系统垂直改革稳步推进,县级环境监测质量管理工作也迎来新的机遇与挑战。从县级环境监测站质量管理工作现状着手,分析新形势下存在质量管理体系有效性缺乏、现场监测过程质量管理薄弱、质量管理意识尚待提高等问题。提出,应从加强体系建设、提高现场监测水平、强化考核培训力度等方面改进县级环境监测质量管理工作水平。     

我国典型南方城市臭氧污染特征

分析了我国典型南方城市的臭氧污染特征,选取我国4个有代表性的南方重点城市武汉、宁波、中山和南宁的2013—2015年监测数据,使用EXCEL、ORIGIN和MATLAB等统计软件开展研究,结果表明:我国南方典型城市的臭氧质量浓度分布有明显时间变化特征,超标时间跨度大,部分南方城市与氮氧化物存在较明显负相关性,相关系数高于-0.6;受城市所在不同地理位置、气象因素、大气扩散条件及可能的不同本地排放污染源构成等因素影响,4个城市的近3年臭氧浓度月均值、超标情况和年内峰值均存在一定差异和分组相似性;与部分气象因素也表现出显著相关性。     

Formation of organic by-products during chlorination of natural waters

Natural water from six sources in Mytilene, Greece, was chlorinated in order to identify and quantify some of the organic by-products formed. The compounds examined were trihalomethanes, haloacetic acids, haloacetonitriles, haloketones, chloral hydrate and chloropicrin. The factors tested were time and chlorine dose. The presence of bromide ion in some of the waters studied resulted in significant changes in the by-product speciation, with enhanced brominated species formation. In addition, UV absorbance, measured at three wavelengths, led to correlation of organic matter content with the concentrations of by-products produced. The species formed, varying among different water sources, increased with increasing chlorine dose. Most of the species also increased with increasing contact time, although there were some exceptions due to hydrolysis reactions.     

空气质量周报二氧化硫采样过程影响因素的探讨

文章通过对空气质量周报连续采样过程有关影响因素进行探讨 ,分析了影响大气二氧化硫监测结果的一些原因或可能 ,首次对甲醛吸收液连续采样稳定性提出疑问 ,强调周报质量保证的重心要从实验室环节转到现场采样等环节上来     

Portable XRF analysis of occupational air filter samples from different workplaces using different samplers: final results, summary and conclusions

This paper concludes a five-year program on research into the use of a portable X-ray fluorescence (XRF) analyzer for analyzing lead in air sampling filters from different industrial environments, including mining, manufacturing and recycling. The results from four of these environments have already been reported. The results from two additional metal processes are presented here. At both of these sites, lead was a minor component of the total airborne metals and interferences from other elements were minimal. Nevertheless, only results from the three sites where lead was the most abundant metal were used in the overall calculation of method accuracy. The XRF analyzer was used to interrogate the filters, which were then subjected to acid digestion and analysis by inductively-coupled plasma optical-emission spectroscopy (ICP-OES). The filter samples were collected using different filter-holders or "samplers" where the size (diameter), depth and homogeneity of aerosol deposit varied from sampler to sampler. The aerosol collection efficiencies of the samplers were expected to differ, especially for larger particles. The distribution of particles once having entered the sampler was also expected to differ between samplers. Samplers were paired to allow the between-sampler variability to be addressed, and, in some cases, internal sampler wall deposits were evaluated and compared to the filter catch. It was found, rather surprisingly, that analysis of the filter deposits (by ICP-OES) of all the samplers gave equivalent results. It was also found that deposits on some of the sampler walls, which in some protocols are considered part of the sample, could be significant in comparison to the filter deposit. If it is concluded that wall-deposits should be analyzed, then XRF analysis of the filter can only give a minimum estimate of the concentration. Techniques for the statistical analysis of field data were also developed as part of this program and have been reported elsewhere. The results, based on data from the three workplaces where lead was the major element present in the samples, are summarized here. A limit of detection and a limit of quantitation are provided. Analysis of some samples using a second analyzer with a different X-ray source technology indicated reasonable agreement for some metals (but this was not evaluated for lead). Provided it is only necessary to analyze the filters, most personal samplers will provide acceptable results when used with portable XRF analysis for lead around applicable limit values.     

Evaluation of Metric Precision for a Riparian Forest Survey

This article evaluates the performance of a protocol to monitor riparian forests in western Oregon, United States based on thequality of the data obtained from a field survey. Precision isthe criteria used to determine the quality of 19 field and 6 derived metrics. The derived metrics were calculated from thefield data. The survey consisted of 110 riparian sites on publicand private lands that were sampled during the summers of 1996 and 1997. In order to calculate metric precision, some of the field plots were re-measured. Metric precision was defined in terms of the coefficient of variability (CV) and standard deviation and then compared with a pre-defined data quality objective (DQO). A metric was considered precise if the CV met or exceeded the DQO. The geomorphology metrics were not precisewhile the forest stand inventory metrics and forest cover metrics, with some exceptions, were precise. The precision formany of the field and derived metrics compared favorably withthe level of precision for similar metrics reported in the literature. Recommendations are made to improve the precision for some metrics and they include changing the way precision is calculated, re-defining the field protocol, or improving field training.     

河流水质自动监测系统建设与运行中常见问题分析

工程设计、基础设施建设、分析仪器、辅助系统、采样系统等方面探讨了水质自动监测系统建设及运行中常见的问题,并提出了相应的改进措施。     

化工装置停工放空过程中VOCs排放及估算方法

通过分析化工企业典型开、停车过程的排污节点,表明停车过程中大气挥发性有机污染物主要来自装置退料结束后挂壁、底部滞留和内部空间蒸气等滞留在设备内部的残余物料。在总结化工装置停工放空过程中大气挥发性有机物来源的基础上,讨论并提出大气污染排放量估算方法。     

上海市陆源入海排污口污染物分析与评价研究

对上海市12个陆源入海排污口污染状况进行了研究。在常规项目监测的基础上,采用GC-MS定性分析了样品中的有毒有机物。同时还对5个排污口进行了遗传毒性的实验分析。结果表明,某些排污口常规污染指标均符合排放标准但同时又分析鉴定出大量有毒有机物存在的现象。文章对监测结果加以细致分析和评价研究,提出在排污口监测中应当引入有毒有机污染物和遗传毒性的监测。