Soot sorption of non-ortho and ortho substituted PCBs

Field-observations of distribution coefficients well above expectations from bulk organic-matter partitioning for several chlorinated aromatic compound classes have lead to the hypothesis that enhanced affinity to soot may not be limited to polycyclic aromatic hydrocarbons but may extend as a significant process for a wider range of hydrophobic organic compounds. This suggestion was here tested in soot-column sorption experiments with a series of ortho- and non-ortho substituted polychlorinated biphenyls (PCBs), using diesel particulate matter (NIST standard reference material SRM-1650) as model soot sorbent. For congeners of similar hydrophobicity, considerably higher affinities toward the soot sorbent were observed for the non-ortho substituted PCBs. Mono- to tetra-ortho substituted PCBs exhibited log-based soot-water distribution coefficients (K(sc)) from 5.25 to 5.51 l/kg(sc) at solute concentrations corresponding to 1-13 microg/l. In contrast, biphenyl, mono- and dichloro- non-ortho substituted PCBs yielded logK(sc) values between 5.09 and 6.35 l/kg(sc). These results are 20-50, and 75-110 times higher, respectively, than the corresponding K(ow)-predicted K(oc) numbers. This strong interaction with soot, particularly of non-ortho substituted PCBs, may fundamentally affect their environmental distribution and bioavailable exposure.     

Estimating K(oc) for persistent organic pollutants: limitations of correlations with K(ow)

The n-octanol/water partition coefficient (K(ow)) is commonly used to predict the soil or aquatic particle water partition coefficient normalized to organic carbon (K(oc)). Many correlations are available covering several chemical classes and ranges of hydrophobicity. This work indicates the K(ow) may not be a strong predictor for persistent organic pollutants (POPs) which are defined here as chemicals with logK(ow) > 5.0. In addition, the correlation developed in this work for POPs will still result in a predicted value which is of by a factor of 15. Accordingly, care must be taken when applying K(oc) estimations using K(ow) for POPs until more suitable correlations are developed.     

Distribution of polychlorinated dibenzo-p-dioxins and dibenzofurans in suspended sediments, dissolved phase and bottom sediment in the Houston Ship Channel

Spatial distributions of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) in the water column and bottom sediments of the Houston Ship Channel in Texas were measured three times over a 1-year period. Total TEQ concentrations in water ranged from 0.01 to 0.25 pg/l for the dissolved phase and from 0.09 to 2.91 pg/l for the suspended phase, while TEQ concentrations in bottom sediments varied from 0.9 to 139.8 ng/kg dry wt. The dissolved concentrations were lower than their respective suspended concentrations, with average dissolved/suspended ratios between 0.11 and 0.59 for individual congeners. More than 89% of the total concentration of 2378-substituted PCDD/PCDFs was attributable to OCDD but 2378-TCDD was the major contributor to total TEQ for the three sampled media. Average logs of organic carbon-normalized suspended sediment-dissolved partitioning coefficients (logK(oc)(obs)) varied between 4.92 and 8.59 l/kg-oc; while in the bottom sediment-dissolved interface, logK(oc)(obs) values ranged from 5.48 to 8.48 l/kg-oc. Observed logK(oc)values varied within a factor of 0.64-1.26 from equilibrium logK(oc) values, suggesting fluxes of PCDD/PCDFs across the interfaces. It was found that in the HSC, on average, the tendency of a compound to move from the particulate phase to the dissolved phase decreases with increasing K(ow).     

Persistence and fate of polychlorinated biphenyls (PCBs) in sewage sludge-amended agricultural soils

Four metal enriched sewage sludges containing different concentrations of polychlorinated biphenyls (PCBs) were applied to two field soils in the UK in 1968. Samples of the sludges, sludge-amended soils and soils from untreated control plots were stored and analysed retrospectively. Sludge concentrations ranged from 1 to 7 mg SigmaPCB kg(-1). The pattern of PCBs was similar in three of the four sludges, with congeners 14, 18, 28 and 52 present at the highest concentrations. The fourth sludge contained higher amounts of congeners 149, 153, 138 and 180. SigmaPCB concentrations in control plot soil have declined over the last 20 years, indicating a reduction in atmospheric deposition inputs of PCBs to the soil. SigmaPCB concentrations also declined on the sludge-amended plots, reaching control plot concentrations (30-60 microg SigmaPCB kg(-1)) in the late-1980s. Half-lives ranged from < 1 to 8.5 years for congeners 18, 28 and SigmaPCB. Biodegradation and/or the formation of reversibly sorbed soil PCB residues could not account for the losses observed. Volatilisation is implicated as the most important loss process on both the control and sludge-amended plots. Using the fugacity approach, congener concentrations in soils at Luddington were predicted still to have not reached equilibrium with the air. Further losses to the atmosphere are likely.     

Polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs) in breast milk from the Pacific Northwest

Breast milk samples from 40 first-time mothers from the Pacific Northwest of the US and Canada were analyzed for polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs). Total PBDEs (summation operator PBDEs), calculated by summing values for the 12 PBDEs congeners analyzed, ranged from 6 to 321 ppb (lipid weight) (mean=96 ppb; median=50 ppb). In approximately 40% of the women (15/40), summation operator PBDEs>100 ppb lw in their milk, and four samples had levels >250 ppb lw. PBDE 47 was the dominant congener in most samples, whereas PBDE 153 was predominant in a few (3/40). summation operator PCBs were calculated by summing values for the 82 PCB congeners analyzed, and ranged from 49 to 415 ppb (lipid weight) (mean=147 ppb; median=126 ppb). approximately 30% of the mothers (13/40) have summation operator PBDEs> summation operator PCBs in their milk samples, and approximately 65% (25/40) have BDE 47>PCB 153 in breast milk samples, with BDE 47 averaging 3-fold greater levels than PCB 153. Clearly, the lower brominated PBDEs are surpassing PCBs as a major environmental concern in North America, and are likely affecting significant portions of the populations in these regions. PBDEs have become a major persistent organic pollutant. However, there are no positive correlations between levels of summation operator PBDEs and summation operator PCBs, or between levels of PBDE 47 and PCB 153, suggesting there may be some differences in exposure pathways for PBDEs and PCBs in humans.     

Measured and predicted volatilisation fluxes of PCBs from contaminated sludge-amended soils

A laboratory experiment was carried out to measure volatilisation fluxes of polychlorinated biphenyls (PCBs) from sewage sludge-amended soils. The most commonly practised methods of applying sludge to agricultural land in the UK, namely, surface application, ploughing in to soil and subsurface injection, were simulated inside glass experimental chambers using an anaerobically digested sludge and a sandy loam soil. Humidified air was blown over the surface of the soil/sludge in the chambers for a period of 32 days, in order to sample a sufficient air volume to detect the volatilising PCBs. The resulting PCB volatilisation fluxes from the different sludge application methods were quantified and compared. Volatilisation fluxes of individual congeners were generally highest for the surface sludge (1-cm depth) application and slightly lower for the plough layer (5-cm depth) application. Fluxes from the subsurface layer of sludge (5-cm depth) were only quantified for the lightest congeners near to the end of the experimental run-time. Results from a multiple regression analysis showed that volatilisation fluxes of PCBs from the surface application are highly dependent on both the sludge concentration and the log of the octanol-air partition coefficient (K(OA)). A well-known soil volatilisation model, developed by Jury et al., was adapted and used to predict fluxes for the different sludge application methods during the experiment. The model predicted volatilisation fluxes that were reasonably comparable to measured fluxes for some congeners, but for others predicted fluxes that were more than an order of magnitude lower than measured fluxes. The model predicted similar loss kinetics to those observed in the experiment. Possible reasons for the dissimilarity between measured and predicted fluxes include inaccuracies in model input parameters and the fact that the models were not developed for predicting fluxes from sludge-amended soils.     

Correlations of nonlinear sorption of organic solutes with soil/sediment physicochemical properties

The estimation of solute sorptive behaviors is essential when direct sorption data are unavailable and will provide a convenient way to assess the fate and the biological activity of organic solutes in soil/sediment environments. In this study, the sorption of 2,4-dichlorophenol (2,4-DCP) on 19 soil/sediment samples and the sorption of 13 organic solutes on one sediment were investigated. All sorption isotherms are nonlinear and can be described satisfactorily by a simple dual-mode model (DMM): q(e)=KpCe+Q0 . bCe/(1+bCe), where Kp (mlg(-1)) is the partition coefficient; Ce (microgml(-1)) is the equilibrium concentration; Q0 (microgg(-1)) is the maximum adsorption capacity; Q0 . b (mlg(-1)) is the Langmuir-type isotherm slope in the low concentration (Henry's law) range and b (mlmicrog(-1)) is a constant related to the affinity of the surface for the solute. Based on these nonlinear sorption isotherms and similar other nonlinear isotherms, it is observed that, for both polar 2,4-DCP and nonpolar phenanthrene, Kp, Q0 and Q0 . b are linearly correlated with soil/sediment organic carbon content (f(oc) in the range of 0.118-53.7%). The results indicate that the nonlinear sorption of organic solutes results primarily from interactions with soil/sediment organic matter. The K*oc K*oc=Kp/f(oc)), Qoc (Qoc=Q0/f(oc)), Loc (Loc=Q0 . b/f(oc)) and b for a given organic solute with different soils/sediments are largely invariant. Furthermore, logK*oc, logb and logLoc for various organic solutes are correlated significantly with the solute logKow or logSw (logKow in the range of 0.9 to 5.13 and logSw in the range of -6.176 to -0.070). A fundamental empirical equation was then established to calculate approximately the nonlinear sorption from soil/sediment f(oc) and solute Sw for a given solute equilibrium concentration.     

Development and validation of a terrestrial biotic ligand model predicting the effect of cobalt on root growth of barley (Hordeum vulgare)

A Biotic Ligand Model was developed predicting the effect of cobalt on root growth of barley (Hordeum vulgare) in nutrient solutions. The extent to which Ca(2+), Mg(2+), Na(+), K(+) ions and pH independently affect cobalt toxicity to barley was studied. With increasing activities of Mg(2+), and to a lesser extent also K(+), the 4-d EC50(Co2+) increased linearly, while Ca(2+), Na(+) and H(+) activities did not affect Co(2+) toxicity. Stability constants for the binding of Co(2+), Mg(2+) and K(+) to the biotic ligand were obtained: logK(CoBL)=5.14, logK(MgBL)=3.86 and logK(KBL)=2.50. Limited validation of the model with one standard artificial soil and one standard field soil showed that the 4-d EC50(Co2+) could only be predicted within a factor of four from the observed values, indicating further refinement of the BLM is needed.     

Molecular hologram derived quantitative structure-property relationships to predict physico-chemical properties of polychlorinated biphenyls

Polychlorinated biphenyls (PCBs) congeners with various degrees of chlorination and substitution patterns are among the most widespread and persistent man-made organic pollutants. They are toxic, lipophilic and tend to be bioaccumulated. The knowledge of the physico-chemical properties is very useful to explain the environmental behavior of PCBs and to perform an exposure assessment. In this paper, we have used a new molecular representation, the molecular hologram, to generate quantitative structure-property relationship models to predict the physico-chemical properties of biphenyl and all of its chlorinated congeners. The investigated properties include 1-octanol/water partition coefficient (logK(ow)), aqueous solubility (-logS(w)), aqueous activity coefficient (-logY(w)), Total molecular surface area, Henry's law constant (logH). The results show that this new quantitative structure-activity relationship approach presents highly predictive models for important physico-chemical properties of PCBs.     

Regression method of the hydrophobicity ruler approach for determining octanol/water partition coefficients of very hydrophobic compounds

A regression method was developed for the hydrophobicity ruler approach, which is an indirect method for determining the octanol/water partition coefficients of very hydrophobic compounds. Two constants introduced into the mathematical model were obtained by regression of the absorption data sampled before the partition equilibrium. A water miscible organic solvent was used to increase the solubility of the very hydrophobic compounds in the aqueous solution so that the hydrophobicity scale was reduced and the equilibration was accelerated. Polydimethylsiloxane/methanol aqueous solution and a series of 21 polychlorinated biphenyls (PCBs) were used to demonstrate the regression method. The PCB compounds with known experimental logK(o/w) values served as reference compounds, while the PCB compounds without known logK(o/w) values were determined. The distribution coefficients (logK(p/s)), uptake and elimination rate constants were obtained from the two regression constants for each compound (reference or unknown). The correlation of the logK(p/s) values of the reference PCB compounds with their logK(o/w) values was linear (logK(o/w)=2.69logK(p/s)+0.76, R(2)=0.97). The logK(o/w) values were compared with literature values and suggested that some values from the literature far off the calibration line could be inaccurate. The critical experimental factors, the merits of the regression method were discussed.     

Non-electrostatic surface complexation models for protons and lead(II) sorption onto single minerals and their mixture

Potentiometric titrations and lead sorption tests were conducted using muscovite, clinochlore, hematite, goethite, quartz, and a mixture of these same minerals. Mechanistic models were developed to represent and interpret these data. The aim was isolating the specific contribution of each mineral in proton and lead binding. Acid-base properties of each single mineral as well as their mixture were represented by discrete models, which consider the dissociation of n monoprotic sites (n-site/n-K(H) models). A one-site/one-K(H) model (logK(H1) = 10.69) was chosen for quartz (dissociation of SiOH edge hydroxyl groups). Goethite and hematite (FeOH groups) were represented by the same one-site/one-K(H) model (logK(H1) = 10.35). Three-site/three-K(H) models were used for muscovite (logK(H1) = 4.18; logK(H2) = 6.65; logK(H3) = 9.67) and clinochlore (logK(H1) = 3.84; logK(H2) = 6.57; logK(H3) = 9.71) assuming that SiOH and AlOH of the aluminosilicate matrix dissociate in the acid-neutral pH range while SiOH groups of quartz inclusions dissociate in the basic range. Similarly, the mixture of these minerals was represented by a three-site/three-K(H) model (logK(H1) = 3.39; logK(H2) = 6.72; logK(H3) = 10.82). According to crossed comparisons with single minerals, the first two sites of the mixture were associated with the aluminosilicate matrix (SiOH and AlOH respectively) and the third site with iron oxides (FeOH) and quartz groups. Additivity of proton binding in the mixture was demonstrated by simulating the mixture's titration curve. A unified model for the entire set of titration curves (single minerals and mixture) was also developed introducing a three-peak distribution function for proton affinity constants. Experimental data for lead sorption onto the mixture and individual minerals in 3-5 pH range denoted the competition between protons and metallic ions. The entire set of lead isotherms (individual mineral and mixture data) was represented adequately by a unified model taking into account both monodentate and bidentate complexes with the three active sites (additivity of lead binding). Experimental data of metal distribution in solid and liquid phases were successfully simulated by implementing the protonation and the surface complexation constants into the database of a dedicated software for chemical equilibria.     

Quantitative structure-activity relationships of nitroaromatics toxicity to the algae (Scenedesmus obliguus)

The DFT-B3LYP method, with the basis set 6-311G( * *), was employed to calculate the molecular geometries and electronic structures of 25 nitroaromatics. The acute toxicity (-lgEC(50)) of these compounds to the algae (Scenedesmus obliguus) along with hydrophobicity described by logK(OW), and two quantum chemical parameters-energy of the lowest unoccupied molecular orbital, E(LUMO), and the charge of the nitro group, [ForQ(NO2), were used to establish the quantitative structure-activity relationships (QSARs). For 18 mononitro derivatives, the hydrophobicity parameter logK(OW) could interpret the toxic mechanism successfully. Dinitro aromatic compounds were susceptible to be reduced to aniline for their electrophilic nature. Their toxicity was controlled mainly by electronic factors instead of hydrophobicity. The electronic parameters, E(LUMO) and Q(NO2), were used to yield the following model: -lg EC(50) = 3.746 - 25.053 E(LUMO) + 6.481 Q(NO2) (n=22, R=0.926, SE=0.206, F=56.854, P<0.001). The predicted toxic values using the above equation are in good agreement with the experimental values.     

Polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs) in human liver and adipose tissue samples from Belgium

Levels of polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs) were measured in paired human adipose tissue and liver samples (n=25) from Belgium. Average concentrations and standard deviation of sum PBDEs (congeners 28, 47, 99, 100, 153, 154 and 183) were 5.3+/-3.0 (range 1.4-13.2) and 3.6+/-2.1 (range 1.0-10.0)ngg(-1) lipid weight (lw) in adipose tissue and liver, respectively. These concentrations were similar to reported PBDE data from Belgium and were at the lower end of the concentration range reported elsewhere in the world. In both tissues under study, BDE 153 and BDE 47 were the most abundant PBDE congeners, contributing approximately 35% and 25% to the total PBDE content. Average concentrations and range of PCBs (sum of 23 congeners) were 490 (range 70-1130) and 380 (range 90-1140)ngg(-1)lw in adipose tissue and liver, respectively. No correlation between age and concentrations of PBDEs could be found (r=0.04), while PCB concentrations correlated significantly with age (r=0.62, p<0.01, for the sum PCBs; r=0.64, p<0.01 for PCB 153 alone). Factors, such as exposure pathways (food, dust and air), rates of bioaccumulation, metabolism and elimination, influence the concentrations of PBDEs differently than those of PCBs in humans.     

Estimation of the volatilization of organic compounds from soil surfaces

Several simple models for the estimation of the half-life (t(1/2)) for the depletion of an organic chemical from a soil surface to air were examined. For moist surfaces, two models are proposed: the first requires knowledge of the soil/organic carbon partition coefficient (K(oc)) and the Henry's law constant (H) and the second the vapor pressure (P(s)) of the chemical involved. Due to uncertainties in the experimental K(oc) values those ones predicted by the group-contribution model of Meylan et al. [Environ. Sci. Technol. 26 (1992) 1560]-and proposed by the U.S. Environmental Protection Agency (EPA)-should be used. If reliable experimental P(s) values are not available, the first model is proposed, where in cases when H values are not available, predicted ones by the Bond-Contribution method of Meylan and Howard [Environ. Toxicol. Chem. 10 (1991) 1283]-and also proposed by EPA-can be used. In general, the agreement of the predicted t(1/2) values with the measured ones is within a factor of 3-5. Similar expressions, but with somewhat poorer results, are presented for dry field soils. In all cases, the obtained results represent a substantial improvement over those obtained with the currently used Dow method: t(1/2) = 1.58 x 10(-8)((K(oc) x S)/P(S)), where S is the solubility of the compound in water.     

Seasonal and spatial variability of polychlorinated biphenyls (PCBs) in vegetation and cow milk from a high altitude pasture in the Italian Alps

The seasonal and spatial variability of polychlorinated biphenyls (PCBs) in vegetation and cow milk was studied in a high altitude pasture in the Alps (1900 m a.s.l.). PCB contamination in vegetation shows a concentration peak in June, which is mainly interpreted as the consequence of a temporary PCB enrichment of the air layer above the ground due to net emission fluxes from the soil. A three compartment dynamic model was developed to test this hypothesis. The North/South enrichment factor in the vegetation was 1.5-1.6 for penta- and hexa-substituted congeners and 1.7 for hepta- and octa-PCBs, according to the effect of temperature on compounds having higher K_oa values. Milk concentrations followed the vegetation seasonal trend. The congener abundance in milk is in agreement with the biotransformation susceptibility, absorption efficiency and residence time of the different congeners in dairy cows.     

A comparison of the properties of the major commercial PBDPO/PBDE product to those of major PBB and PCB products

Decabromodiphenyl oxide (DBDPO), a highly effective polybrominated diphenyl oxide (PBDPO) flame retardant (FR) used primarily in electrical and electronic equipment, is the second highest volume brominated flame retardant (BFR) and accounts for 82% of the PBDPO usage globally. The apparent similarities in chemical structure between the DBDPO, polychlorinated and polybrominated biphenyl (PCB, PBB) molecules have led to the presumption that these substances also share similar toxicological and environmental properties. However, DBDPO's physical/chemical properties, applications, environmental release, and toxicology differ substantially from the former PCB/PBB products. DBDPO is a heavier and larger molecule than components of the predominant PCB/PBB products used in the past, and the commercial DBDPO product has a lower water solubility and vapor pressure than the former PCB and PBB products. DBDPO's detection in the environment is generally in sediments near known point sources, and its primary use in thermoplastics limits its environmental release from end products. PBB environmental release has been primarily associated with one accident occurring in the US in 1973. The PCBs, used in applications with a high potential for environmental release, were detected in diverse locations around the world as early as in the 1970s. Current releases of PCB are considered related to an environmental cycling process of congeners previously released into the environment; however, DBDPO's physical/chemical properties do not indicate a similar potential. Extensive testing of the DBDPO commercial product has demonstrated that it is toxicologically and pharmacokinetically different from the predominant PCB and PBB products used in the past. Thus, although the chemical structures of DBDPO, PBB, and PCB appear similar, the properties of DBDPO are distinctly different.     

Uptake rates of alkylphenols, PAHs and carbazoles in semipermeable membrane devices (SPMDs) and polar organic chemical integrative samplers (POCIS)

Passive sampling devices provide a useful contribution to the monitoring of contaminants in the aquatic environment. However, calibration data needed for the calculation of water concentrations from sampler accumulations are restricted to a limited number of compound classes. Thus uptake of a range of alkylated phenols (AP), polycyclic aromatic hydrocarbons (PAH) and carbazoles was determined for semipermeable membrane devices (SPMDs) and polar organic chemical integrative samplers (POCIS) using a flow through exposure system. Sampling rates ranged from 0.02 to 0.26 l d(-1) for POCIS and 0.02 to 13.83 l d(-1) for SPMDs. Observed SPMD uptake was also compared to that predicted by an empirical model including the use of performance reference compounds (PRCs). Predicted sampling rates did not differ by more than a factor of 1.3 from experimental values for PAH, providing further evidence that the PRC approach can be successfully used to determine in situ sampling rates for these compounds. Experimental sampling rates for AP in SPMDs were, however, much lower than predicted. This discrepancy was too large to be explained by small uncertainties in the calibration system or in the calculations. Based on these data we conclude that while hydrophobic AP are accumulated by SPMDs their partitioning cannot be predicted from their logK(ow) using current methods. Due to this lower than expected uptake, sampling rates were only higher in SPMDs than POCIS in the range of logK(ow)>5.0. Simultaneous deployment of both sampler types allows the study of compounds with a broad range of physicochemical properties.