Current status and future focus of hazardous waste management in China

 Rapid social and economic development in China has caused the amount of hazardous wastes being generated to increase drastically. The necessary regulations and systems regarding the management of hazardous wastes are currently still not in place. Based on an analysis of the characteristics of hazardous waste pollution and pollution trends in China, this paper reports on China's current status regarding hazardous waste management, and introduces the main difficulties to be faced. The principles and objectives, and the action plan for hazardous waste pollution control in China are also explained in detail. These principles and objectives have been stipulated in the Technological Policies on Hazardous Waste Pollution Control, which is issued by China State EPA, State ETC, and the Science and Technology Ministry. Received: April 30, 2002 / Accepted: October 17, 2002     

Hazardous healthcare waste management in the Kingdom of Bahrain

Hazardous healthcare waste has become an environmental concern for many developing countries including the Kingdom of Bahrain. There have been several significant obstacles facing the Kingdom in dealing with this issue including; limited documentation regarding generation, handling, management, and disposal of waste. This in turn hinders efforts to plan better healthcare waste management. In this paper, hazardous waste management status in the Kingdom has been investigated through an extensive survey carried out on selected public and private healthcare premises. Hazardous waste management practices including: waste generation, segregation, storage, collection, transportation, treatment, and disposal were determined. The results of this study along with key findings are discussed and summarized. In addition; several effective recommendations and improvements of hazardous waste management are suggested.     

Report: future industrial solid waste management in pars Special Economic Energy Zone (PSEEZ), Iran.

The Pars Special Economic Energy Zone (PSEEZ) is located in the south of Iran, on the northern coastline of the Persian Gulf. This area was established in 1998 for the utilization of south Pars field oil and gas resources. This field is one of the largest gas resources in the world and contains about 6% of the total fossil fuels known. Petrochemical industries, gas refineries and downstream industries are being constructed in this area. At present there are three gas refineries in operation and five more gas refineries are under construction. In this study, different types of solid waste including municipal solid waste (MSW) and industrial wastes were investigated separately. The aim of the study was to focus on the management of the industrial wastes in order to minimize the environmental impact. In the first stage, the types and amounts of industrial waste in PSEEZ were evaluated by an inventory. The main types of industrial waste are oil products (fuel oil, light oil, lubricating oil), spent catalysts, adsorbents, resins, coke, wax and packaging materials. The waste management of PSEEZ is quite complex because of the different types of industry and the diversity of industrial residues. In some cases recycling/reuse of waste is the best option, but treatment and disposal are also necessary tools. Recently a design has been prepared for a disposal site in PSEEZ for the industrial waste that cannot be reused or recycled. The total surface area of this disposal site where the industrial waste should be tipped for the next 20 years was estimated to be about 42 000 m2.     

Report: integrated industrial waste management systems in China.

Various models of urban sustainable development have been introduced in recent years and some of these such as integrated waste management have been proved to be of particular value. Integrated industrial waste management systems include all the administrative, financial, legal, planning and engineering functions involved in solutions to the problems of industrial waste. Even though the pace of the improvement made to China's industrial waste management capacity is impressive, China has been unable to keep up with the increasing demand for waste management. This paper will evaluate the application of integrated industrial waste management systems in promoting urban sustainable development in the context of three case study cities in China (positive case, average case and negative case) by identifying and accessing the factors that affect the success or failure of integrated industrial waste management systems.     

Electronic tracking and management of industrial waste in Taiwan

This study discusses an online reporting system used for waste flow tracking (auditing) and investigation of violations. In contrast to systems used in other countries, this system requires waste generators and transporters, as well as the treatment, storage, and disposal facilities (TSDFs) to file online reports on the movement of industrial waste within 24 h of being shipped, received, or completely treated. This system also provides online analytical processing for reporters to analyze all their data, thereby encouraging self-management of waste. Currently there are 25,861 generators, 4,963 transporters, and 865 TSDFs in Taiwan that are required to file online reports. Approximately 80 % of all waste generated in Taiwan is reported using this system. More than 7,000 vehicles are equipped with a global positioning system (GPS) for waste tracking, among which over 2,000 transport hazardous waste. Disposal vehicles transmit their locations to the Control Center every 30 s. Database quality has been enhanced through auditing and inspection for more than 12 years since this system was established. It serves as a “single portal” for industrial waste management and facilitates informed decision making for resource exchange and material flow among various industries to achieve resource and environmental sustainability.     

Stakeholder analysis for industrial waste management systems

Stakeholder approaches have been applied to the management of companies with a view to the improvement of all areas of performance, including economic, health and safety, waste reduction, future policies, etc. However no agreement exists regarding stakeholders, their interests and levels of importance. This paper considers stakeholder analysis with particular reference to environmental and waste management systems. It proposes a template and matrix model for identification of stakeholder roles and influences by rating the stakeholders. A case study demonstrates the use of these and their ability to be transferred to other circumstances and organizations is illustrated by using a large educational institution.     

An assessment of the current and future options for domestic waste management in Kaunas, Lithuania.

The main purpose of this study was to carry out a retrospective analysis of solid waste generation in Kaunas city from 1994 to 2003 and to calculate the theoretical waste generation in the future. This paper also presents measurements of the annual variations of waste amounts and calculations on a theoretical waste incineration facility. Two waste treatment scenarios were considered. Scenario A: waste deposit at the landfill with 'implementation of domestic waste separation and recycling'. Scenario B: waste removal to a landfill with 'multi-treatment: household separation, recycling and energetic recovery'. Three levels of waste treatment were proposed. The first level was implementation of the recycling system, which included household waste separation. The next step involved mechanical-biological treatment. The third level was the construction and operation of a new waste incineration plant in Kaunas. Two sites in Kaunas city were proposed; however, more detailed analysis, including the economic factors, will need to be done.     

青岛市工业危险废物处理现状分析与评价

自2006年青岛市工业产业结构调整以来,城市经济快速发展与人民生活水平日益提高,商品消费量不断增加,由此导致工业危险废物的产生量与排放量加速增长,且废物种类繁多、性质复杂、产生源数量分布广泛,管理难度大,因而带来了极大的环境安全隐患.在调查和分析2005-2007年青岛市工业危险废物产生现状的基础上,指出:(1)产生量最大危险废物类别为无机氰化物、无机氟化物、含铬废物和染料涂料等4大类;(2)产生量大小排序依次为平度市、莱西市和李沧区.同时,在分析废物产生特性和污染特性的基础上,提出青岛市在工业危险废物管理过程中存在的问题已成为青岛绿色经济发展的严重壁垒.针对工业经济发展规划和废物产生特征,提出了相关的管理对策和建议,对青岛市工业危险废物的有效管理和促进循环经济的发展具有一定的指导意义.     

Construction waste management based on industrial management models: a Swedish case study.

This paper describes a methodology for estimating the true internal costs of construction waste, aimed at promoting environmentally friendly waste management. The study employs cost-benefit analysis, contribution margin analysis, the polluter-pays principle and a mathematical model: the model for Efficient Use of Resources for Optimal Production Economy (EUROPE), which has been introduced previously by the author for assigning industrial costs to waste. The calculations are performed on construction waste created in a case study of a building project. Moreover, waste is regarded as, in a business sense, having the same basic status as any normal industrial product, namely the 'equality principle'. Application of the methodology is suggested to create incentives for environmental and profitability improvement in construction companies and other types of industrial sectors. The results of the case study show the generation of construction waste to substantially decrease the final operating income, due to the internal shadow price cost it creates. This paper is intended to reduce the gap between the choice of waste management procedures and their economic impact, the overall objective being to accomplish an improved industrial environmental situation.     

The current situation of solid waste management in China

With economic development, the quantity of solid waste is increasing rapidly in China; the total quantities of municipal solid waste (MSW), industrial solid waste (ISW), and hazardous waste (HW) in 2002 were 136.5 million tons, 945 million tons, and 10 million tons, respectively. In 2002, the quantity of MSW disposed of was 74.04 million tons, 89.30% of which was landfilled, 3.72% was incinerated, and 6.98% was composted. There are currently 651 disposal facilities for MSW in China. Mining gangue is the largest component of ISW, making up 27.5% of the total. In the Chinese industrial sector, the coal mining and processing industry contributed most to the total quantity of ISW, with 16.0% of the total quantity of ISW generated by this sector. In total, 44% of HW was recycled, 27% was stored, 13.5% was disposed of, and 15.4% was discharged. Of the total HW generated, 40% was produced by the chemical materials and chemical products industry. Five categories of HW, i.e., waste alkali, waste acid, inorganic fluoride waste, copper waste, and inorganic cyanide waste, made up 57.8% of the total HW generated. Solid waste pollution has become a huge challenge faced by those involved in Chinese environmental management, but this can be seen as an opportunity to improve environmental quality. This article introduces the strategies taken to improve solid waste management in China.     

Proximate composition of household waste and applicability of waste management technologies by source separation in Hanoi,Vietnam

The organic fraction of municipal solid wastes in Southeast Asia, which has a high moisture content, accounts for a large proportion of total waste. Local governments need to pay adequate attention to the composition of wastes to determine alternative waste management technologies. This study proposed the use of a triangle diagram to describe changes in proximate composition and rates of successful source separation of municipal solid waste and to identify technical challenges about alternative waste management technologies such as incineration, composting, and refuse-derived fuel production based on physical and proximate composition analysis of household waste sampled in Hanoi, Vietnam, as a case study. The analysis indicated the effectiveness of different types of source separation as well as different levels of successful achievement of source separation as an adjustment mechanism for the proximate composition of waste. Proper categorization of wastes for source separation is necessary for the appropriate use of alternative waste management technologies. The results showed that, at a source separation rate of just greater than 0.52 in a three-way separation scheme, the waste separated as combustible waste would be suitable for incineration with energy recovery. Based on well-designed schemes of source separation, alternative waste management technologies can be applied.     

Hazardous waste incinerators under waste uncertainty: Balancing and throughput maximization via heat recuperation

Hazardous waste incinerators (HWIs) differ substantially from thermal power facilities, since instead of maximizing energy production with the minimum amount of fuel, they aim at maximizing throughput. Variations in quantity or composition of received waste loads may significantly diminish HWI throughput (the decisive profit factor), from its nominal design value. A novel formulation of combustion balance is presented, based on linear operators, which isolates the wastefeed vector from the invariant combustion stoichiometry kernel. Explicit expressions for the throughput are obtained, in terms of incinerator temperature, fluegas heat recuperation ratio and design parameters, for an arbitrary number of wastes, based on fundamental principles (mass and enthalpy balances). The impact of waste variations, of recuperation ratio and of furnace temperature is explicitly determined. It is shown that in the presence of waste uncertainty, the throughput may be a decreasing or increasing function of incinerator temperature and recuperation ratio, depending on the sign of a dimensionless parameter related only to the uncertain wastes. The dimensionless parameter is proposed as a sharp a’ priori waste ‘fingerprint’, determining the necessary increase or decrease of manipulated variables (recuperation ratio, excess air, auxiliary fuel feed rate, auxiliary air flow) in order to balance the HWI and maximize throughput under uncertainty in received wastes. A 10-step procedure is proposed for direct application subject to process capacity constraints. The results may be useful for efficient HWI operation and for preparing hazardous waste blends.     

A model to minimize joint total costs for industrial waste producers and waste management companies.

The model LINKopt is a mixed-integer, linear programming model for mid- and long-term planning of waste management options on an inter-company level. There has been a large increase in the transportation of waste material in Germany, which has been attributed to the implementation of the European Directive 75/442/EEC on waste. Similar situations are expected to emerge in other European countries. The model LINKopt has been developed to determine a waste management system with minimal decision-relevant costs considering transportation, handling, storage and treatment of waste materials. The model can serve as a tool to evaluate various waste management strategies and to obtain the optimal combination of investment options. In addition to costs, ecological aspects are considered by determining the total mileage associated with the waste management system. The model has been applied to a German case study evaluating different investment options for a co-operation between Daimler-Chrysler AG at Rastatt, its suppliers, and the waste management company SITA P+R GmbH. The results show that the installation of waste management facilities at the premises of the waste producer would lead to significant reductions in costs and transportation.     

上海市生活垃圾处置情况及管理对策探讨

总结了2000-2004年上海市生活垃圾的产生量、资源化利用、最终处置及管理等情况,分析了目前在上海生活垃圾管理中存在的问题,为今后提高上海市生活垃圾管理水平提出了对策措施.     

Towards zero industrial waste: Utilisation of brick dust waste in sustainable construction

Laboratory investigations were carried out to establish the potential utilisation of brick dust (BD) in construction. The dust is a waste material from the cutting of fired clay bricks. Currently, the disposal of the dust is a problem to the brick fabrication company, and hence an environmental pollution concern. The dust was stabilised either used on its own or in combination with Pulverised Fuel Ash (PFA), a by-product material from coal combustion. The traditional stabilisers of lime and/or Portland Cement (PC) were used as controls. The main aim was to use a sustainable stabiliser material, where these stabilisers were partially replaced with Ground Granulated Blastfurnace Slag (GGBS), a by-product material from steel manufacture. Compacted cylinder test specimens were made at typical stabiliser contents and moist cured for up to 56 days prior to testing for compressive and California Bearing Ratio (CBR) strength tests, and to linear expansion during moist curing and subsequent soaking in water. The results obtained showed that partial substitution of the dust with PFA resulted in stronger material compared to using it on its own. The blended stabilisers achieved better performance. These results suggest technological, economic as well as environmental advantages of using the brick dust and similar industrial by-products to achieve sustainable infrastructure development with near zero industrial waste.